Response of delta sedimentary system to variation of water and sediment in the Yellow River over past six decades

In order to find out the variation process of water-sediment and its effect on the Yellow River Delta, the water discharge and sediment load at Lijin from 1950 to 2007 and the decrease of water discharge and sediment load in the Yellow River Basin caused by human disturbances were analyzed by means of statistics. It was shown that the water discharge and sediment load into the sea were decreasing from 1950 to 2007 with serious fluctuation. The human activities were the main cause for decrease of water discharge and sediment load into the sea. From 1950 to 2005, the average annual reduction of water discharge and sediment load by means of water-soil conservation practices were 2.02×10^9 m^3 and 3.41×10^8 t respectively, and the average annual volume by water abstraction for industry and agriculture were 2.52×10^10 m^3 and 2.42×10^8 t respectively. The average sediment trapped by Sanmenxia Reservoir was 1.45×10^8 t from 1960 to 2007, and the average sediment retention of Xiaolangdi Reservoir was 2.398×10^8t from 1997 to 2007. Compared to the data records at Huanyuankou, the water discharge and sediment load into the sea decreased with siltation in the lower reaches and increased with scouring in the lower reaches. The coastline near river mouth extended and the delta area increased when the ratio of accumulative sediment load and accumulative water discharge into the sea （SSCT） is 25.4-26.0 kg/m^3 in different time periods. However, the sharp decrease of water discharge and sediment load into the sea in recent years, especially the Yellow River into the sea at Qing 8, the entire Yellow River Delta has turned into erosion from siltation, and the time for a reversal of the state was about 1997.

An Overview of Industrial Source Discharges into Water in the Albanian Territory

Direct and indirect discharges are released in the environment by many economic entities which operate in the territory of Albania.Different installations release many substances from separated sources or widespread,affecting the environmental quality and often causing pollution.Each economic entity that discharges substances in the environment is equipped with an environmental permit which is granted according to a system composed by two categories,A and B.Each Albanian citizen has the right guaranteed by the constitution to collect information regarding the city or country environmental conditions by this system.Furthermore,this system provides data regarding the state of the environment,polluting activity,different chemical components discharged,etc.The purpose of this study is to identify different sources of industrial discharge into water bodies,aiming to provide information that can be useful for the environmental protection,its preservation and improvement,the prevention and reduction of risks related to human and animal health and the improvement of the life quality.Data gained from the identification of economic entities equipped with an active environmental permit type A and B showed the various sources of waste discharges in the Albanian territory.The study was conducted using the QKB(National Business Center)database for a period of eight years from 2014 to 2022.Data show that an increase of technical unit discharging substances into water has increased over years due to a major number of installations of polluting economic entities in the country territory.

Filling of the Three Gorges Reservoir to the 135-m Level: Instant Effects on the Yangtze Discharge and Suspended Sediment Concentration Entering the Estuary

Via the valuable opportunity of the Three Gorges Reservoir (TGR) 135-m filling in June 2003, the Yangtze discharge and suspended sediment concentration (SSC) entering the estuary during the period from 15 May to 15 July 2003 were analyzed to examine the instant effects of the filling on them. The Yangtze discharge and SSC entering the estuary in the periods before, during and after the filling clearly indicated three phases: 1) the pre-storage phase characterized by natural conditions, in which the SSC increased with increasing water discharge; 2) the storage phase, during which the SSC decreased dramatically with decreasing water discharge; and 3) the post-storage phase, during which both the SSC and water discharge remained at relatively low levels first until the end of June, then the SSC increased gradually with increasing water discharge. It seems that the times for the instant effects of the decreasing discharge downstream from the upper Yangtze on the Yangtze discharge and SSC entering the estuary due to the TGR 135-m filling to take place were about 5 d and 1 d respectively, while both were about 18 d for those of the increasing discharge. This probably reflects the buffering and resultantly hysteresis of the 1800-km stretch from the upper Yangtze to the estuary. The results are helpful for scientific and hydrological investigation of the Yangtze mainstream downstream from the TGR Dam and of the estuarine and adjacent coastal waters.

Change of Annual Extreme Water Levels and Correlation with River Discharges in the Middle-lower Yangtze River: Characteristics and Possible Affecting Factors

As one of the fastest developing regions in China, the middle-lower Yangtze River(MLYR) is vulnerable to floods and droughts. With obtained time series of annual highest water level(HWL), annual lowest water level(LWL) and the corresponding river discharges from three gauging stations in MLYR that covering the period 1987–2011, the current study evaluated the change characteristics of annual extreme water levels and the correlation with river discharges by using the methods of trend test, Mann-Whitney-Pettitt(MWP) test and double mass analysis. Major result indicated a decreasing/increasing trend for annual HWL/LWL of all stations in MLYR during the study period. A change point in 1999 was identified for annual HWL at the Hankou and Datong stations. The year 2006 was found to be the critical year that the relationship between annual extreme water levels and river discharges changed in the MLYR. With contrast to annual LWL in MLYR, further investigation revealed that the change characteristics of annual HWL were highly consistent with regional precipitation in the Yangtze River Basin, while the linkage with Three Gorges Dam(TGD) operation is not strong. Our observation also pointed out that the effect of serious down cutting of the riverbed and the enlargement of the cross-section area during the initial period of TGD operation caused the downward trend of the relationship between annual LWL and river discharge. Whereas, the relatively raised river water level before the flood season due to TGD regulation since 2006 explained for the changing upward trend of the relationship between annual HWL and river discharge.

THE FREE BENDING VIBRATION OF CYLINDRICAL TANK PARTIALLY FILLED WITH-LIQUID AND SUBMERGED IN WATER

This paper studies the free bending vibration of cylindrical tank partially filled with liquid and submerged in water. The depths of liquid and water may be completely arbitrary. The exact calculating formulae of mode shape functions and inherent frequencies are deduced. The results can be gained by means of computer. The analysis shows that the effect of liquid and water on vibration of cylindrical tank is respectively equivalent to a generalized distributive mass attached to the tank.

The Mechanical Analysis and Experimental Study of Shock Wave Effect of Electrical Discharge under Water In Filth Cleaning

Filth adhering to metal pipes can be cleaned by shock wave generated by electrical discharge under water. The mechanism of shock wave effect of electrical discharge under water on filth cleaning is analyzed by building a mechanical model. A metal pipe coated with cement to simulate real filth is cleaned by using electrical discharge under water. The experimental results confirm the mechanical analysis and also show the technology of electrical discharge under water is an very effective method for filth cleaning.

Water Quality from the Purification Unit of Thiakhar (Diourbel, Senegal) and Impact of Discharges from Treatment on Water Resources

The installation of a purification unit since 2008 in the village of Thiakhar has improved the physico-chemical and bacteriological quality of the water supply. However about 55% of the raw water comes out of the unit as discharges (approximately 14 m3 per day) highly concentrated in fluoride and chloride ions. Based on historical samples, we find that the volumes of water consumed together with the volumes of water discharged are increasingly significant from year to year. The storage of waste water is carried out in a septic tank connected to a leaking cesspool sink. Significant excesses of these discharges are visible on the site and a flow of concentrate is observed creating a puddle of water that attracts birds and straying cattle. The study describes the following substantial impacts on the natural and human environment: 1) contamination of groundwater, 2) soil salinization 3), impact on flora and fauna, 4) impact on health. The study concludes by identifying measures to mitigate the negative impacts related to the discharges and by proposing alternative solution.

MOLECULAR DYNAMICS SIMULATIONS OF FILLED AND EMPTY CAGE-LIKE WATER CLUSTERS IN LIQUID WATER AND THEIR SIGNIFICANCE TO GAS HYDRATE FORMATION MECHANISMS

Molecular dynamics simulations are performed to observe the evolutions of 512 and 51262 cage-like water clusters filled with or without a methane molecule immersed in bulk liquid water at 250 K and 230 K. The lifetimes of these clusters are calculated according to their Lindemann index δ (t) using the criteria of δ≥0.07. For both the filled and empty clusters, we find the dynamics of bulk water determines the lifetimes of cage-like water clusters, and that the lifetime of 512 62 cage-like cluster is the same as that of 512 cage-like cluster. Although the methane molecule indeed makes the filled cage-like cluster more stable than the empty one, the empty cage-like cluster still has chance to be long-lived compared with the filled clusters. These observations support the labile cluster hypothesis on the formation mechanisms of gas hydrates.

Research on Water-Filling Patterns and Countermeasures──A case study of Xiaotun Coal Mine

There are many water-filling factors in Xiaotun Coal Mine, such as effective precipitation, goaf water, mining-induced fissure zone, surface water system, aquifers and tectonics. For different mining levels, the relative importance of these factors is different, and the water-filling condition is changed accordingly. So it is urgent to make it clear for mining. To ensure the safety of mining, we build a system of preventing mine water-filling using detailed AHP (analytical hierarchy process) calculation. This system is based on the analysis of mine water-filling factors in order to define the relative importance of the factors. Decision-makers use it as a strong scientific basis for Xiaotun Coal Mine.The method offered in this paper has been proved to be very applicable.

Treatment of Microalgae in Ballast Water Using Hydroxyl Radical in Accordance with the D-2 Ballast Water Discharge Standard

The effect of hydroxyl radical(·OH) on microalgae in ballast water is experimentally investigated. An ?OH plasma generator, which has a thin plate discharge Ag electrode covered by two α-Al2 O3 dielectric layers, is built. The plasma generator is filled with O2 and gaseous H2 O and is powered by a homemade power supply. ?OH radicals are generated by a series of plasma reactions and then dissolved into ballast water to kill microalgae. The maximum density of the killed microalgae is about 11 000 cells per milliliter. At this density, the microalgae are not reactivated at the 48th hour and the 120th hour in the treated ballast waters, and the content of chlorophyll in these microalgae decreases by 100%. The water quality returns to a normal level after 120 hours without secondary pollution of aquatic organisms and environment. These results show that the requirements of the D-2 ballast water discharge standard defined by the International Maritime Organization(IMO) are satisfied with the proposed treatment, and that ·OH is an ideal substance for killing microalgae during ballast water replacement of ships.

Case study for investigating groundwater and the future of mountain spring discharges in Southern Italy

Groundwater extraction is used to alleviate drought in many habitats. However, widespread drought decreases spring discharge and there is a need to integrate climate change research into resource management and action. Accurate estimates of groundwater discharge may be valuable in improving decision support systems of hydrogeological resource exploitation. The present study performs a forecast for groundwater discharge in Aquifer?s Cervialto Mountains(southern Italy). A time series starting in 1883 was the basis for longterm predictions. An Ensemble Discharge Prediction(EDis P) was applied, and the progress of the discharge ensemble forecast was inferred with the aid of an Exponential Smoothing(ES) model initialized at different annual times. EDisP-ES hindcast model experiments were tested, and discharge plume-patterns forecast was assessed with horizon placed in the year 2044. A 46-year cycle pattern was identified by comparing simulations and observations, which is essential for the forecasting purpose. ED is P-ES performed an ensemble mean path for the coming decades that indicates a discharge regime within ± 1 standard deviation around the mean value of 4.1 m^3 s^(-1). These fluctuations are comparable with those observed in the period 1961-1980 and further back, with changepoints detectable around the years 2025 and 2035. Temporary drought conditions are expected after the year 2030.

Observation and characterization of flow in critical sections of a horizontal pressurized gating system using water models

This work is concerned with the hydraulics and f low characterization in a pressurized,horizontal gating system with multiple ingates attached to a plate mold,using transparent water models.Runners with two different aspect ratios(w/h=0.5 and 2)and four different types of ingates(rectangular,convergent,divergent and venturi)were examined for their influence on flow behavior.Flow behavior was visualized using a high speed camera capable of capturing images up to 10,000 frames per second.Real time experimentation with a few runner–ingate combinations were carried out to validate the usefulness of water models in predicting the f illing behavior.Comparison of the approaches provided useful insights into the filling behavior in critical sections of the flow passages as well as the utility of water models towards understanding of the f illing behavior during real time casting.

Investigation of Upstream Near-Far Problem in VDSL Systems via Complete Adaptive Iterative Water Filling Algorithm

Crosstalk is the main degrading factor in Digital Subscriber Line (DSL) systems which are the result of electromagnetic coupling between two adjacent twisted pairs in a cable. Very-high bit-rate Digital Subscriber Line (VDSL) systems which use higher frequencies for data transmission than the other DSL systems, this effect is more considerable in Bit Error Rate (BER) degradation. This paper considers a complete adaptive iterative water-filling (IWF) algorithm for Resolving Upstream Near-Far Problem in VDSL Systems. The new distributed dynamic spectrum management algorithm is proposed, which improve achievable bit rate of iterative water-filling algorithm. The paper proffers a new power back-off strategy of the spectral mask at the near-end users, in order to protect the far-end users. Simulation of the proposed algorithm indicates that the bit rate is increased considerably rather the IWF and adaptive water-filling (AIWF) algorithms by keeping their low complexity. Furthermore, by adding the number of users in network, the new algorithm achieves performance gains over the AIWF, completely adaptive.

The causes and impacts for heat stress in spring maize during grain filling in the North China Plain--A review

High-temperature stress （HTS） at the grain-filling stage in spring maize （Zea mays L.） is the main obstacle to increasing productivity in the North China Plain （NCP）. To solve this problem, the physiological mechanisms of HTS, and its causes and impacts, must be understood. The HTS threshold of the duration and rate in grain filling, photosynthetic characteristics （e.g., the thermal stability of thylakoid membrane, chlorophyll and electron transfer, photosynthetic carbon assimilation）, water status （e.g., leaf water potential, turgor and leaf relative water content） and signal transduction in maize are reviewed. The HTS threshold for spring maize is highly desirable to be appraised to prevent damages by unfavorable temperatures during grain filling in this region. HTS has negative impacts on maize photosynthesis by damaging the stability of the thylakoid membrane structure and degrading chlorophyll, which reduces light energy absorption, transfer and photosynthetic carbon assimilation. In addition, photosynthesis can be deleteriously affected due to inhibited root growth under HTS in which plants decrease their water-absorbing capacity, leaf water potential, turgor, leaf relative water content, and stomatal conductance. Inhibited photosynthesis decrease the supply of photosynthates to the grain, leading to falling of kernel weight and even grain yield. However, maize does not respond passively to HTS. The plant transduces the abscisic acid （ABA） signal to express heat shock proteins （HSPs）, which are molecular chaperones that participate in protein refolding and degradation caused by HTS. HSPs stabilize target protein configurations and indirectly improve thylakoid membrane structure stability, light energy absorption and passing, electron transport, and fixed carbon assimilation, leading to improved photosynthesis. ABA also induces stomatal closure to maintain a good water status for photosynthesis. Based on understanding of such mechanisms, strategies for alleviating HTS at the grain-filling stage in spring maize are summarized. Eight strategies have the potential to improve the ability of spring maize to avoid or tolerate HTS in this study, e.g., adjusting sowing date to avoid HTS, breeding heat-tolerance varieties, and tillage methods, optimizing irrigation, heat acclimation, regulating chemicals, nutritional management, and planting geometric design to tolerate HTS. Based on the single technology breakthrough, a com- prehensive integrated technical system is needed to improve heat tolerance and increase the spring maize yield in the NCP.

Influence of Seed Priming on Performance and Water Productivity of Direct Seeded Rice in Alternating Wetting and Drying

Direct seeded rice is promising alternative to traditional transplanting, but requires appropriate crop and water management to maintain yield performance and achieve high water productivity. Present study evaluated the effect of seed priming and irrigation on crop establishment, tillering, agronomic traits, paddy yield, grain quality and water productivity of direct seeded rice in alternate wetting and drying （DSR-AWD） in comparison with direct seeded rice at field capacity （DSR- FC）. Seed priming treatments were osmo-priming with KCI （2.2%）, CaCI2 （2.2%） and moringa leaf extracts （MLE, 3.3%） including hydro-priming as control. Among the treatments, seed osmo-primed with MLE emerged earlier and had higher final emergence, followed by osmo-priming with CaCI2. Tillering emergence rate and number of tillers per plant were the highest for seed priming with CaCI2 in DSR- AWD. Total productive and non-productive tillers, panicle length, biological and grain yields, harvest index were highest for seed priming with MLE or CaCI2 in DSR-AWD. Similarly, grain quality, estimated in terms of normal grains, abortive and chalky grains, was also the highest in DSR-AWD with MLE osmo-priming. Benefit cost ratio and water productivity was also the highest in DSR-AWD for seed priming with MLE. In conclusion, seed priming with MLE or CaCI2 can be successfully employed to improve the direct seeded rice performance when practiced with alternate wetting and drying irrigation.

Effects of Nitrogen Fertilizer Treatments on Caryopsis Filling and Respiratory Rate of Rice

An experiment was conducted to study the effects of nitrogen （N） rate and application time on grain filling and respiratory trait of caryopsis in two rice varieties, IR36 and Dali. The treatments were consisted of no N application topdressing at both tillering and booting stages （CK）, 6 g/pot of N topdressing at the tillering stage and 2 g/pot of N topdressing at the booting stage, 2 g/pot of N topdressing at the tillering stage and 6 g/pot of N topdressing at the booting stage. The results showed that the proper utilization of N fertilizer can be helpful to maintain the higher water content, higher respiratory rate and higher dehydrogenase activity of rice caryopsis in late filling phase, and prolong the course for filling and maintaining higher respiratory rate and dehydrogenase activity of rice caryopsis. More N application at booting was more effective compared to more N application at tillering.

GRACE-based estimates of water discharge over the Yellow River basin

As critical component of hydrologic cycle, basin discharge is a key issue for understanding the hydrological and climatologic related to water and energy cycles. Combining GRACE gravity field models with ET from GLDAS models and precipitation from GPCP, discharge of the Yellow River basin are estimated from the water balance equation. While comparing the results with discharge from GLDAS model and in situ measurements, the results reveal that discharge from Mosaic and CLM GLDAS model can partially represent the river discharge and the discharge estimation from water balance equation could reflect the discharge from precipitation over the Yellow River basin.