Structural instability in underground engineering,especially in coal-rock structures,poses significant safety risks.Thus,the development of an accurate monitoring method for the health of coal-rock bodies is crucial.T...Structural instability in underground engineering,especially in coal-rock structures,poses significant safety risks.Thus,the development of an accurate monitoring method for the health of coal-rock bodies is crucial.The focus of this work is on understanding energy evolution patterns in coal-rock bodies under complex conditions by using shear,splitting,and uniaxial compression tests.We examine the changes in energy parameters during various loading stages and the effects of various failure modes,resulting in an innovative energy dissipation-based health evaluation technique for coal.Key results show that coal bodies go through transitions between strain hardening and softening mechanisms during loading,indicated by fluctuations in elastic energy and dissipation energy density.For tensile failure,the energy profile of coal shows a pattern of “high dissipation and low accumulation” before peak stress.On the other hand,shear failure is described by “high accumulation and low dissipation” in energy trends.Different failure modes correlate with an accelerated increase in the dissipation energy before destabilization,and a significant positive correlation is present between the energy dissipation rate and the stress state of the coal samples.A novel mathematical and statistical approach is developed,establishing a dissipation energy anomaly index,W,which categorizes the structural health of coal into different danger levels.This method provides a quantitative standard for early warning systems and is adaptable for monitoring structural health in complex underground engineering environments,contributing to the development of structural health monitoring technology.展开更多
Structural Health Monitoring(SHM)systems have become a crucial tool for the operational management of long tunnels.For immersed tunnels exposed to both traffic loads and the effects of the marine environment,efficient...Structural Health Monitoring(SHM)systems have become a crucial tool for the operational management of long tunnels.For immersed tunnels exposed to both traffic loads and the effects of the marine environment,efficiently identifying abnormal conditions from the extensive unannotated SHM data presents a significant challenge.This study proposed amodel-based approach for anomaly detection and conducted validation and comparative analysis of two distinct temporal predictive models using SHM data from a real immersed tunnel.Firstly,a dynamic predictive model-based anomaly detectionmethod is proposed,which utilizes a rolling time window for modeling to achieve dynamic prediction.Leveraging the assumption of temporal data similarity,an interval prediction value deviation was employed to determine the abnormality of the data.Subsequently,dynamic predictive models were constructed based on the Autoregressive Integrated Moving Average(ARIMA)and Long Short-Term Memory(LSTM)models.The hyperparameters of these models were optimized and selected using monitoring data from the immersed tunnel,yielding viable static and dynamic predictive models.Finally,the models were applied within the same segment of SHM data,to validate the effectiveness of the anomaly detection approach based on dynamic predictive modeling.A detailed comparative analysis discusses the discrepancies in temporal anomaly detection between the ARIMA-and LSTM-based models.The results demonstrated that the dynamic predictive modelbased anomaly detection approach was effective for dealing with unannotated SHM data.In a comparison between ARIMA and LSTM,it was found that ARIMA demonstrated higher modeling efficiency,rendering it suitable for short-term predictions.In contrast,the LSTM model exhibited greater capacity to capture long-term performance trends and enhanced early warning capabilities,thereby resulting in superior overall performance.展开更多
Skin-attachable electronics have garnered considerable research attention in health monitoring and artificial intelligence domains,whereas susceptibility to elec-tromagnetic interference(EMI),heat accumulation issues,...Skin-attachable electronics have garnered considerable research attention in health monitoring and artificial intelligence domains,whereas susceptibility to elec-tromagnetic interference(EMI),heat accumulation issues,and ultraviolet(UV)-induced aging problems pose significant constraints on their potential applications.Here,an ultra-elas-tic,highly breathable,and thermal-comfortable epidermal sensor with exceptional UV-EMI shielding performance and remarkable thermal conductivity is developed for high-fidelity monitoring of multiple human electrophysiological signals.Via filling the elastomeric microfibers with thermally conductive boron nitride nanoparticles and bridging the insulating fiber interfaces by plating Ag nanoparticles(NPs),an interwoven thermal con-ducting fiber network(0.72 W m^(-1) K^(-1))is constructed benefiting from the seamless thermal interfaces,facilitating unimpeded heat dissipation for comfort skin wearing.More excitingly,the elastomeric fiber substrates simultaneously achieve outstanding UV protection(UPF=143.1)and EMI shielding(SET>65,X-band)capabilities owing to the high electrical conductivity and surface plasmon resonance of Ag NPs.Furthermore,an electronic textile prepared by printing liquid metal on the UV-EMI shielding and thermally conductive nonwoven textile is finally utilized as an advanced epidermal sensor,which succeeds in monitoring different electrophysiological signals under vigorous electromagnetic interference.This research paves the way for developing protective and environmentally adaptive epidermal electronics for next-generation health regulation.展开更多
The integration of wearable technologies and artificial intelligence (AI) has revolutionized healthcare, enabling advanced personal health monitoring systems. This article explores the transformative impact of wearabl...The integration of wearable technologies and artificial intelligence (AI) has revolutionized healthcare, enabling advanced personal health monitoring systems. This article explores the transformative impact of wearable technologies and AI on healthcare, highlighting the development and theoretical application of the Integrated Personal Health Monitoring System (IPHMS). By integrating data from various wearable devices, such as smartphones, Apple Watches, and Oura Rings, the IPHMS framework aims to revolutionize personal health monitoring through real-time alerts, comprehensive tracking, and personalized insights. Despite its potential, the practical implementation faces challenges, including data privacy, system interoperability, and scalability. The evolution of healthcare technology from traditional methods to AI-enhanced wearables underscores a significant advancement towards personalized care, necessitating further research and innovation to address existing limitations and fully realize the benefits of such integrated health monitoring systems.展开更多
As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its a...As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its application play an important role in ensuring the safety and extending the service life of bridges.This paper carries out in-depth research and analysis on the related technology of bridge structural health monitoring.Firstly,the existing monitoring technologies at home and abroad are sorted out,and the advantages and problems of various methods are compared and analyzed,including nondestructive testing,stress measurement,vibration characteristic identification,and other commonly used monitoring technologies.Secondly,the key technologies and equipment in the bridge health monitoring system,such as sensor technology,data acquisition,and processing technology,are introduced in detail.Finally,the development trend in the field of bridge health monitoring is prospected from both theoretical research and technical application.In the future,with the development of emerging technologies such as big data,cloud computing,and the Internet of Things,it is expected that bridge health monitoring with intelligent and systematic features will be more widely applied to provide a stronger guarantee for the safe and efficient operation of bridges.展开更多
This paper explores the opportunities and challenges of college mental health education from the perspective of big data.Firstly,through literature review,the importance of mental health education and the current issu...This paper explores the opportunities and challenges of college mental health education from the perspective of big data.Firstly,through literature review,the importance of mental health education and the current issues are elucidated.Then,from the perspective of big data,the potential opportunities of big data in college mental health education are analyzed,including data-driven personalized education,real-time monitoring and warning systems,and interdisciplinary research and collaboration.At the same time,the challenges faced by college mental health education under the perspective of big data are also pointed out,such as data privacy and security issues,insufficient data analysis and interpretation capabilities,and inadequate technical facilities and talent support.Lastly,the research content of this paper is summarized,and directions and suggestions for future research are proposed.展开更多
The association between heavy metals in the blood and obesity has been examined in many studies.However,inconsistencies have been observed in the results of these studies.The present study was conducted using data fro...The association between heavy metals in the blood and obesity has been examined in many studies.However,inconsistencies have been observed in the results of these studies.The present study was conducted using data from 119,181 participants of the Korea National Health and Nutrition Examination Survey(KNHANES)for 11 years in 2005 and between 2008 and 2017.The subjects with missing heavy metal blood tests,health interview data,and health examination data were excluded from the study.The study population comprised 1,844 individuals(972 men,and 872 women)who were eligible for inclusion.It was found that obesity and abdominal obesity were associated with an increase in both blood mercury(P<0.001)and alanine aminotransferase(ALT)(P<0.001).After adjusting the confounding factors,those with concurrent high levels of ALT and the highest tertile of mercury showed an increased risk of obesity(odds ratio 4.46,95%confidence interval 2.23-8.90,P<0.001)as well as abdominal obesity(odds ratio 5.36,95%confidence interval 2.57-11.17,P<0.001).The interrelationship of mercury and ALT with the parameters of body mass index(P for interaction=0.009)and waist circumference(P for interaction=0.012),respectively,have been observed to be significant,suggesting that the reciprocal relationship could contribute to obesity and abdominal obesity.展开更多
Clutch is one of the most significant components in automobiles.To improve passenger safety,reliability and economy of automobiles,advanced supervision and fault diagnostics are required.Condition Monitoring is one of...Clutch is one of the most significant components in automobiles.To improve passenger safety,reliability and economy of automobiles,advanced supervision and fault diagnostics are required.Condition Monitoring is one of the key divisions that can be used to track the reliability of clutch and allied components.The state of the clutch elements can be monitored with the help of vibration signals which contain valuable information required for classification.Specific drawbacks of traditional fault diagnosis techniques like high reliability on human intelligence and the requirement of profes-sional expertise,have made researchers look for intelligent fault diagnosis techniques.In this article,the classification performance of the deep learning technique(employing images plotted from vibration signals)is compared with the machine learning technique(using features extracted from vibration signals)to identify the most viable solution for condition monitoring of the clutch system.The overall experimentation is carried out in two phases,namely the deep learning phase and the machine learning phase.Overall,the effectiveness of the pre-trained networks was assessed and compared with machine learning algorithms.Based on the comparative study,the best-performing technique is recommended for real-time application.展开更多
In order to allow the guardians to monitor the physiological parameters of the infant more intuitively and to be able to respond to sudden irregularities in the pulse rate,abnormal blood oxygen,high or low body temper...In order to allow the guardians to monitor the physiological parameters of the infant more intuitively and to be able to respond to sudden irregularities in the pulse rate,abnormal blood oxygen,high or low body temperature and other conditions,and to facilitate communication with the medical staff or to request assistance in treatment,an STM32 microcontroller-based infant health monitoring system is designed.The digital signal acquisition module for pulse,blood oxygen and body temperature acquire the raw data,and the microcontroller performs algorithmic processing to display the physiological parameters such as pulse,blood oxygen and body temperature of the infant,and configures the threshold alarms for the physiological parameters by means of a keypad module.Finally,the test results are compared and tested against the standard physiological parameters of infants and children to verify that the system meets the requirements of medical precision and accuracy.展开更多
The fatigue of concrete structures will gradually appear after being subjected to alternating loads for a long time,and the accidents caused by fatigue failure of bridge structures also appear from time to time.Aiming...The fatigue of concrete structures will gradually appear after being subjected to alternating loads for a long time,and the accidents caused by fatigue failure of bridge structures also appear from time to time.Aiming at the problem of degradation of long-span continuous rigid frame bridges due to fatigue and environmental effects,this paper suggests a method to analyze the fatigue degradation mechanism of this type of bridge,which combines long-term in-site monitoring data collected by the health monitoring system(HMS)and fatigue theory.In the paper,the authors mainly carry out the research work in the following aspects:First of all,a long-span continuous rigid frame bridge installed with HMS is used as an example,and a large amount of health monitoring data have been acquired,which can provide efficient information for fatigue in terms of equivalent stress range and cumulative number of stress cycles;next,for calculating the cumulative fatigue damage of the bridge structure,fatigue stress spectrum got by rain flow counting method,S-N curves and damage criteria are used for fatigue damage analysis.Moreover,it was considered a linear accumulation damage through the Palmgren-Miner rule for the counting of stress cycles.The health monitoring data are adopted to obtain fatigue stress data and the rain flow counting method is used to count the amplitude varying fatigue stress.The proposed fatigue reliability approach in the paper can estimate the fatigue damage degree and its evolution law of bridge structures well,and also can help bridge engineers do the assessment of future service duration.展开更多
Structural health monitoring (SHM) is a multi-discipline field that involves the automatic sensing of structural loads and response by means of a large number of sensors and instruments, followed by a diagnosis of the...Structural health monitoring (SHM) is a multi-discipline field that involves the automatic sensing of structural loads and response by means of a large number of sensors and instruments, followed by a diagnosis of the structural health based on the collected data. Because an SHM system implemented into a structure automatically senses, evaluates, and warns about structural conditions in real time, massive data are a significant feature of SHM. The techniques related to massive data are referred to as data science and engineering, and include acquisition techniques, transition techniques, management techniques, and processing and mining algorithms for massive data. This paper provides a brief review of the state of the art of data science and engineering in SHM as investigated by these authors, and covers the compressive sampling-based data-acquisition algorithm, the anomaly data diagnosis approach using a deep learning algorithm, crack identification approaches using computer vision techniques, and condition assessment approaches for bridges using machine learning algorithms. Future trends are discussed in the conclusion.展开更多
BACKGROUND Accumulating evidence suggests that the gut microbiome is involved in the pathogenesis of insulin resistance(IR).However,the link between two of the most prevalent bowel disorders,chronic diarrhea and const...BACKGROUND Accumulating evidence suggests that the gut microbiome is involved in the pathogenesis of insulin resistance(IR).However,the link between two of the most prevalent bowel disorders,chronic diarrhea and constipation,and the triglyceride glucose(TyG)index,a marker of IR,has not yet been investigated.AIM To investigate the potential association between TyG and the incidence of chronic diarrhea and constipation.METHODS This cross-sectional study enrolled 2400 participants from the National Health and Nutrition Examination Survey database from 2009-2010.TyG was used as an exposure variable,with chronic diarrhea and constipation as determined by the Bristol Stool Form Scale used as the outcome variables.A demographic investigation based on TyG quartile subgroups was performed.The application of multivariate logistic regression models and weighted generalized additive models revealed potential correlations between TyG,chronic diarrhea,and constipation.Subgroup analyses were performed to examine the stability of any potential associations.RESULTS In the chosen sample,chronic diarrhea had a prevalence of 8.00%,while chronic constipation had a prevalence of 8.04%.In multiple logistic regression,a more prominent positive association was found between TyG and chronic diarrhea,particularly in model 1(OR=1.45;95%CI:1.17-1.79,P=0.0007)and model 2(OR=1.40;95%CI:1.12-1.76,P=0.0033).No definite association was observed between the TyG levels and chronic constipation.The weighted generalized additive model findings suggested a more substantial positive association with chronic diarrhea when TyG was less than 9.63(OR=1.89;95%CI:1.05-3.41,P=0.0344),and another positive association with chronic constipation when it was greater than 8.2(OR=1.74;95%CI:1.02-2.95,P=0.0415).The results of the subgroup analyses further strengthen the extrapolation of these results to a wide range of populations.CONCLUSION Higher TyG levels were positively associated with abnormal bowel health.展开更多
Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method o...Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method of a structural health monitoring system is using the characteristics of a cable-membrane structure. Taking the Yueyang Sanhe Airport Terminal as an example, a finite element model is established to determine the critical structural components. Next, the engineering requirements and the framework of the monitoring system are studied based on the results of numerical analysis. The specific implementation of the structural health monitoring is then carried out, which includes sensor selection, installation and wiring. The proposed framework is successfully applied to the monitoring system for the Yueyang Airport terminal building, and the synchronous acquisition of fiber Bragg grating and acceleration sensor signals is implemented in an innovative way. The successful implementation and operation of structural health monitoring will help to guarantee the safety of the cablemembrane structure during its service life.展开更多
In this present time,Human Activity Recognition(HAR)has been of considerable aid in the case of health monitoring and recovery.The exploitation of machine learning with an intelligent agent in the area of health infor...In this present time,Human Activity Recognition(HAR)has been of considerable aid in the case of health monitoring and recovery.The exploitation of machine learning with an intelligent agent in the area of health informatics gathered using HAR augments the decision-making quality and significance.Although many research works conducted on Smart Healthcare Monitoring,there remain a certain number of pitfalls such as time,overhead,and falsification involved during analysis.Therefore,this paper proposes a Statistical Partial Regression and Support Vector Intelligent Agent Learning(SPR-SVIAL)for Smart Healthcare Monitoring.At first,the Statistical Partial Regression Feature Extraction model is used for data preprocessing along with the dimensionality-reduced features extraction process.Here,the input dataset the continuous beat-to-beat heart data,triaxial accelerometer data,and psychological characteristics were acquired from IoT wearable devices.To attain highly accurate Smart Healthcare Monitoring with less time,Partial Least Square helps extract the dimensionality-reduced features.After that,with these resulting features,SVIAL is proposed for Smart Healthcare Monitoring with the help of Machine Learning and Intelligent Agents to minimize both analysis falsification and overhead.Experimental evaluation is carried out for factors such as time,overhead,and false positive rate accuracy concerning several instances.The quantitatively analyzed results indicate the better performance of our proposed SPR-SVIAL method when compared with two state-of-the-art methods.展开更多
In-process damage to a cutting tool degrades the surfacenish of the job shaped by machining and causes a signicantnancial loss.This stimulates the need for Tool Condition Monitoring(TCM)t...In-process damage to a cutting tool degrades the surfacenish of the job shaped by machining and causes a signicantnancial loss.This stimulates the need for Tool Condition Monitoring(TCM)to assist detection of failure before it extends to the worse phase.Machine Learning(ML)based TCM has been extensively explored in the last decade.However,most of the research is now directed toward Deep Learning(DL).The“Deep”formulation,hierarchical compositionality,distributed representation and end-to-end learning of Neural Nets need to be explored to create a generalized TCM framework to perform eciently in a high-noise environment of cross-domain machining.With this motivation,the design of dierent CNN(Convolutional Neural Network)architectures such as AlexNet,ResNet-50,LeNet-5,and VGG-16 is presented in this paper.Real-time spindle vibrations corresponding to healthy and various faulty congurations of milling cutter were acquired.This data was transformed into the time-frequency domain and further processed by proposed architectures in graphical form,i.e.,spectrogram.The model is trained,tested,and validated considering dierent datasets and showcased promising results.展开更多
The material mechanical parameters of the dam body and foundation will change when a dam is reinforced during the aging process.This causes significant changes in the structural state of the project and makes it diffi...The material mechanical parameters of the dam body and foundation will change when a dam is reinforced during the aging process.This causes significant changes in the structural state of the project and makes it difficult to ensure its structural safety.In this study,a new deformation warning index for reinforced concrete dams was developed according to the prototype monitoring data,statistical models,three-dimensional finite element model(FEM)numerical simulation,and the critical conditions of the dam structure.A statistical model was established to separate the water pressure component.Then,a three-dimensional FEM of the reinforced concrete dam was constructed to simulate the water pressure component.Furthermore,the deformation components that affected the mechanical parameters of the dam under the same amount of reservoir water level change were separated and quantified accurately.In addition,the method for inversion of comprehensive mechanical parameters after dam reinforcement was used.The influence mechanisms of the deformation behavior of concrete dams under the reservoir water level and temperature changes were investigated.A new deformation warning index was developed by combining the forward-simulated critical water pressure component and temperature component in the period of extreme temperature decrease with the aging component separated by the statistical model.The new deformation warning index considers the structural state of the dam before and after reinforcement and links the structural strength criterion and the deformation evolution mechanisms.It provides a theoretical foundation and decision support for long-term service and operation management of reinforced dams.展开更多
Largest portion of the bridge stock in almost any country and bridge owning organisation consists on ordinary bridges that has short or medium spans and are now deteriorating due to aging, etc. Therefore, it is becomi...Largest portion of the bridge stock in almost any country and bridge owning organisation consists on ordinary bridges that has short or medium spans and are now deteriorating due to aging, etc. Therefore, it is becoming an important social concern to develop and put to practical use simple and efficient health monitoring systems for existing short and medium span (10 - 30 m) bridges. In this paper, one practical solution to the problem for condition assessment of short and medium span bridges was discussed. A vehicle-based measurement with a public bus as part of a public transit system (called “Bus monitoring system”) has been developed to be capable of detecting damage that may affect the structural safety of a bridge from long term vibration measurement data collected while the vehicle (bus) crossed the target bridges. This paper systematically describes how the system has been developed. The bus monitoring system aims to detect the transition from the damage acceleration period, in which the structural safety of an aged bridge declines sharply, to the deterioration period by continually monitoring the bridge of interest. To evaluate the practicality of the newly developed bus monitoring system, it has been field-tested over a period of about four years by using an in-service fixed-route bus operating on a bus route in the city of Ube, Yamaguchi Prefecture, Japan. The verification results thus obtained are also described in this paper. This study also evaluates the sensitivity of “characteristic deflection”, which is a bridge (health) condition indicator used by the bus monitoring system, in damage detection. Sensitivity of “characteristic deflection” is verified by introducing artificial damage into a bridge that has ended its service life and is awaiting removal. As the results, it will be able to make a rational long-term health monitoring system for existing short and mediumspan bridges, and then the system helps bridge administrators to establish the rational maintenance strategies.展开更多
The coronavirus disease 2019(COVID-19)has currently caused the mortality of millions of people around the world.Aside from the direct mortality from the COVID-19,the indirect effects of the pandemic have also led to a...The coronavirus disease 2019(COVID-19)has currently caused the mortality of millions of people around the world.Aside from the direct mortality from the COVID-19,the indirect effects of the pandemic have also led to an increase in the mortality rate of other non-COVID patients.Evidence indicates that novel COVID-19 pandemic has caused an inflation in acute cardiovascular mortality,which did not relate to COVID-19 infection.It has in fact increased the risk of death in cardiovascular disease(CVD)patients.For this purpose,it is dramatically inevitable to monitor CVD patients’vital signs and to detect abnormal events before the occurrence of any critical conditions resulted in death.Internet of things(IoT)and health monitoring sensors have improved the medical care systems by enabling latency-sensitive surveillance and computing of large amounts of patients’data.The major challenge being faced currently in this problem is its limited scalability and late detection of cardiovascular events in IoT-based computing environments.To this end,this paper proposes a novel framework to early detection of cardiovascular events based on a deep learning architecture in IoT environments.Experimental results showed that the proposed method was able to detect cardiovascular events with better performance(95.30%average sensitivity and 95.94%mean prediction values).展开更多
IOT has carried outimportant function in converting the traditional fitness care corporation.With developing call for in population,traditional healthcare structures have reached their outmost functionality in present...IOT has carried outimportant function in converting the traditional fitness care corporation.With developing call for in population,traditional healthcare structures have reached their outmost functionality in presenting sufficient and as plenty as mark offerings.The worldwide is handling devastating developingantique population disaster and the right want for assisted-dwelling environments is turning into inevitable for senior citizens.There furthermore a determination by means of the use of way of countrywide healthcare organizations to increase crucial manual for individualized,right blanketed care to prevent and manipulate excessive coronial situations.Many tech orientated packages related to HealthMonitoring have been delivered these days as taking advantage of net boom everywhere on globe,manner to improvements in cellular and in IOT generation.Such as optimized indoor networks insurance,community shape,and fairly-lowdevice fee performances,advanced tool reliability,low device energy consumption,and hundreds higher unusual common usual performance in network safety and privacy.Studies have highlighted fantastic advantages of integrating IOT with health care location and as era is improving the rate also cannot be that terrific of a problem.However,many challenges in this new paradigm shift notwithstanding the fact that exist,that need to be addressed.So the out most purpose of this research paper is 3 essential departments:First,evaluation of key elements that drove the adoption and boom of the Internet of factors based totally domestic some distance off monitoring;Second,present fashionable improvement of IOT in home a long manner off monitoring shape and key building gadgets;Third,communicate future very last effects and distinct guidelines of such type a long way off monitoring packages going ahead.Such Research is a wonderful manner in advance now not outstanding in IOT Terminology but in standard fitness care location.展开更多
This paper introduces the satellite system running status and key events.This satellite has been observing the Earth for six years after its launch into a 645 km sun-synchronous orbit.Through the health trend analysis...This paper introduces the satellite system running status and key events.This satellite has been observing the Earth for six years after its launch into a 645 km sun-synchronous orbit.Through the health trend analysis of the platform and subsystems,the orbit,power supply,rotating parts status,temperature,fuel consumption and so on are introduced in detail.The cameras' status also are monitored and analyzed.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52011530037 and 51904019)。
文摘Structural instability in underground engineering,especially in coal-rock structures,poses significant safety risks.Thus,the development of an accurate monitoring method for the health of coal-rock bodies is crucial.The focus of this work is on understanding energy evolution patterns in coal-rock bodies under complex conditions by using shear,splitting,and uniaxial compression tests.We examine the changes in energy parameters during various loading stages and the effects of various failure modes,resulting in an innovative energy dissipation-based health evaluation technique for coal.Key results show that coal bodies go through transitions between strain hardening and softening mechanisms during loading,indicated by fluctuations in elastic energy and dissipation energy density.For tensile failure,the energy profile of coal shows a pattern of “high dissipation and low accumulation” before peak stress.On the other hand,shear failure is described by “high accumulation and low dissipation” in energy trends.Different failure modes correlate with an accelerated increase in the dissipation energy before destabilization,and a significant positive correlation is present between the energy dissipation rate and the stress state of the coal samples.A novel mathematical and statistical approach is developed,establishing a dissipation energy anomaly index,W,which categorizes the structural health of coal into different danger levels.This method provides a quantitative standard for early warning systems and is adaptable for monitoring structural health in complex underground engineering environments,contributing to the development of structural health monitoring technology.
基金supported by the Research and Development Center of Transport Industry of New Generation of Artificial Intelligence Technology(Grant No.202202H)the National Key R&D Program of China(Grant No.2019YFB1600702)the National Natural Science Foundation of China(Grant Nos.51978600&51808336).
文摘Structural Health Monitoring(SHM)systems have become a crucial tool for the operational management of long tunnels.For immersed tunnels exposed to both traffic loads and the effects of the marine environment,efficiently identifying abnormal conditions from the extensive unannotated SHM data presents a significant challenge.This study proposed amodel-based approach for anomaly detection and conducted validation and comparative analysis of two distinct temporal predictive models using SHM data from a real immersed tunnel.Firstly,a dynamic predictive model-based anomaly detectionmethod is proposed,which utilizes a rolling time window for modeling to achieve dynamic prediction.Leveraging the assumption of temporal data similarity,an interval prediction value deviation was employed to determine the abnormality of the data.Subsequently,dynamic predictive models were constructed based on the Autoregressive Integrated Moving Average(ARIMA)and Long Short-Term Memory(LSTM)models.The hyperparameters of these models were optimized and selected using monitoring data from the immersed tunnel,yielding viable static and dynamic predictive models.Finally,the models were applied within the same segment of SHM data,to validate the effectiveness of the anomaly detection approach based on dynamic predictive modeling.A detailed comparative analysis discusses the discrepancies in temporal anomaly detection between the ARIMA-and LSTM-based models.The results demonstrated that the dynamic predictive modelbased anomaly detection approach was effective for dealing with unannotated SHM data.In a comparison between ARIMA and LSTM,it was found that ARIMA demonstrated higher modeling efficiency,rendering it suitable for short-term predictions.In contrast,the LSTM model exhibited greater capacity to capture long-term performance trends and enhanced early warning capabilities,thereby resulting in superior overall performance.
基金financially supported by the National Natural Science Foundation of China(52373079,52161135302,52233006)the China Postdoctoral Science Foundation(2022M711355)the Natural Science Foundation of Jiangsu Province(BK20221540).
文摘Skin-attachable electronics have garnered considerable research attention in health monitoring and artificial intelligence domains,whereas susceptibility to elec-tromagnetic interference(EMI),heat accumulation issues,and ultraviolet(UV)-induced aging problems pose significant constraints on their potential applications.Here,an ultra-elas-tic,highly breathable,and thermal-comfortable epidermal sensor with exceptional UV-EMI shielding performance and remarkable thermal conductivity is developed for high-fidelity monitoring of multiple human electrophysiological signals.Via filling the elastomeric microfibers with thermally conductive boron nitride nanoparticles and bridging the insulating fiber interfaces by plating Ag nanoparticles(NPs),an interwoven thermal con-ducting fiber network(0.72 W m^(-1) K^(-1))is constructed benefiting from the seamless thermal interfaces,facilitating unimpeded heat dissipation for comfort skin wearing.More excitingly,the elastomeric fiber substrates simultaneously achieve outstanding UV protection(UPF=143.1)and EMI shielding(SET>65,X-band)capabilities owing to the high electrical conductivity and surface plasmon resonance of Ag NPs.Furthermore,an electronic textile prepared by printing liquid metal on the UV-EMI shielding and thermally conductive nonwoven textile is finally utilized as an advanced epidermal sensor,which succeeds in monitoring different electrophysiological signals under vigorous electromagnetic interference.This research paves the way for developing protective and environmentally adaptive epidermal electronics for next-generation health regulation.
文摘The integration of wearable technologies and artificial intelligence (AI) has revolutionized healthcare, enabling advanced personal health monitoring systems. This article explores the transformative impact of wearable technologies and AI on healthcare, highlighting the development and theoretical application of the Integrated Personal Health Monitoring System (IPHMS). By integrating data from various wearable devices, such as smartphones, Apple Watches, and Oura Rings, the IPHMS framework aims to revolutionize personal health monitoring through real-time alerts, comprehensive tracking, and personalized insights. Despite its potential, the practical implementation faces challenges, including data privacy, system interoperability, and scalability. The evolution of healthcare technology from traditional methods to AI-enhanced wearables underscores a significant advancement towards personalized care, necessitating further research and innovation to address existing limitations and fully realize the benefits of such integrated health monitoring systems.
文摘As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its application play an important role in ensuring the safety and extending the service life of bridges.This paper carries out in-depth research and analysis on the related technology of bridge structural health monitoring.Firstly,the existing monitoring technologies at home and abroad are sorted out,and the advantages and problems of various methods are compared and analyzed,including nondestructive testing,stress measurement,vibration characteristic identification,and other commonly used monitoring technologies.Secondly,the key technologies and equipment in the bridge health monitoring system,such as sensor technology,data acquisition,and processing technology,are introduced in detail.Finally,the development trend in the field of bridge health monitoring is prospected from both theoretical research and technical application.In the future,with the development of emerging technologies such as big data,cloud computing,and the Internet of Things,it is expected that bridge health monitoring with intelligent and systematic features will be more widely applied to provide a stronger guarantee for the safe and efficient operation of bridges.
文摘This paper explores the opportunities and challenges of college mental health education from the perspective of big data.Firstly,through literature review,the importance of mental health education and the current issues are elucidated.Then,from the perspective of big data,the potential opportunities of big data in college mental health education are analyzed,including data-driven personalized education,real-time monitoring and warning systems,and interdisciplinary research and collaboration.At the same time,the challenges faced by college mental health education under the perspective of big data are also pointed out,such as data privacy and security issues,insufficient data analysis and interpretation capabilities,and inadequate technical facilities and talent support.Lastly,the research content of this paper is summarized,and directions and suggestions for future research are proposed.
基金This study was supported by the Jungwon University Research Grant(2021-044).
文摘The association between heavy metals in the blood and obesity has been examined in many studies.However,inconsistencies have been observed in the results of these studies.The present study was conducted using data from 119,181 participants of the Korea National Health and Nutrition Examination Survey(KNHANES)for 11 years in 2005 and between 2008 and 2017.The subjects with missing heavy metal blood tests,health interview data,and health examination data were excluded from the study.The study population comprised 1,844 individuals(972 men,and 872 women)who were eligible for inclusion.It was found that obesity and abdominal obesity were associated with an increase in both blood mercury(P<0.001)and alanine aminotransferase(ALT)(P<0.001).After adjusting the confounding factors,those with concurrent high levels of ALT and the highest tertile of mercury showed an increased risk of obesity(odds ratio 4.46,95%confidence interval 2.23-8.90,P<0.001)as well as abdominal obesity(odds ratio 5.36,95%confidence interval 2.57-11.17,P<0.001).The interrelationship of mercury and ALT with the parameters of body mass index(P for interaction=0.009)and waist circumference(P for interaction=0.012),respectively,have been observed to be significant,suggesting that the reciprocal relationship could contribute to obesity and abdominal obesity.
文摘Clutch is one of the most significant components in automobiles.To improve passenger safety,reliability and economy of automobiles,advanced supervision and fault diagnostics are required.Condition Monitoring is one of the key divisions that can be used to track the reliability of clutch and allied components.The state of the clutch elements can be monitored with the help of vibration signals which contain valuable information required for classification.Specific drawbacks of traditional fault diagnosis techniques like high reliability on human intelligence and the requirement of profes-sional expertise,have made researchers look for intelligent fault diagnosis techniques.In this article,the classification performance of the deep learning technique(employing images plotted from vibration signals)is compared with the machine learning technique(using features extracted from vibration signals)to identify the most viable solution for condition monitoring of the clutch system.The overall experimentation is carried out in two phases,namely the deep learning phase and the machine learning phase.Overall,the effectiveness of the pre-trained networks was assessed and compared with machine learning algorithms.Based on the comparative study,the best-performing technique is recommended for real-time application.
文摘In order to allow the guardians to monitor the physiological parameters of the infant more intuitively and to be able to respond to sudden irregularities in the pulse rate,abnormal blood oxygen,high or low body temperature and other conditions,and to facilitate communication with the medical staff or to request assistance in treatment,an STM32 microcontroller-based infant health monitoring system is designed.The digital signal acquisition module for pulse,blood oxygen and body temperature acquire the raw data,and the microcontroller performs algorithmic processing to display the physiological parameters such as pulse,blood oxygen and body temperature of the infant,and configures the threshold alarms for the physiological parameters by means of a keypad module.Finally,the test results are compared and tested against the standard physiological parameters of infants and children to verify that the system meets the requirements of medical precision and accuracy.
文摘The fatigue of concrete structures will gradually appear after being subjected to alternating loads for a long time,and the accidents caused by fatigue failure of bridge structures also appear from time to time.Aiming at the problem of degradation of long-span continuous rigid frame bridges due to fatigue and environmental effects,this paper suggests a method to analyze the fatigue degradation mechanism of this type of bridge,which combines long-term in-site monitoring data collected by the health monitoring system(HMS)and fatigue theory.In the paper,the authors mainly carry out the research work in the following aspects:First of all,a long-span continuous rigid frame bridge installed with HMS is used as an example,and a large amount of health monitoring data have been acquired,which can provide efficient information for fatigue in terms of equivalent stress range and cumulative number of stress cycles;next,for calculating the cumulative fatigue damage of the bridge structure,fatigue stress spectrum got by rain flow counting method,S-N curves and damage criteria are used for fatigue damage analysis.Moreover,it was considered a linear accumulation damage through the Palmgren-Miner rule for the counting of stress cycles.The health monitoring data are adopted to obtain fatigue stress data and the rain flow counting method is used to count the amplitude varying fatigue stress.The proposed fatigue reliability approach in the paper can estimate the fatigue damage degree and its evolution law of bridge structures well,and also can help bridge engineers do the assessment of future service duration.
基金the National Natural Science Foundation of China (51638007, 51478149, 51678203,and 51678204).
文摘Structural health monitoring (SHM) is a multi-discipline field that involves the automatic sensing of structural loads and response by means of a large number of sensors and instruments, followed by a diagnosis of the structural health based on the collected data. Because an SHM system implemented into a structure automatically senses, evaluates, and warns about structural conditions in real time, massive data are a significant feature of SHM. The techniques related to massive data are referred to as data science and engineering, and include acquisition techniques, transition techniques, management techniques, and processing and mining algorithms for massive data. This paper provides a brief review of the state of the art of data science and engineering in SHM as investigated by these authors, and covers the compressive sampling-based data-acquisition algorithm, the anomaly data diagnosis approach using a deep learning algorithm, crack identification approaches using computer vision techniques, and condition assessment approaches for bridges using machine learning algorithms. Future trends are discussed in the conclusion.
文摘BACKGROUND Accumulating evidence suggests that the gut microbiome is involved in the pathogenesis of insulin resistance(IR).However,the link between two of the most prevalent bowel disorders,chronic diarrhea and constipation,and the triglyceride glucose(TyG)index,a marker of IR,has not yet been investigated.AIM To investigate the potential association between TyG and the incidence of chronic diarrhea and constipation.METHODS This cross-sectional study enrolled 2400 participants from the National Health and Nutrition Examination Survey database from 2009-2010.TyG was used as an exposure variable,with chronic diarrhea and constipation as determined by the Bristol Stool Form Scale used as the outcome variables.A demographic investigation based on TyG quartile subgroups was performed.The application of multivariate logistic regression models and weighted generalized additive models revealed potential correlations between TyG,chronic diarrhea,and constipation.Subgroup analyses were performed to examine the stability of any potential associations.RESULTS In the chosen sample,chronic diarrhea had a prevalence of 8.00%,while chronic constipation had a prevalence of 8.04%.In multiple logistic regression,a more prominent positive association was found between TyG and chronic diarrhea,particularly in model 1(OR=1.45;95%CI:1.17-1.79,P=0.0007)and model 2(OR=1.40;95%CI:1.12-1.76,P=0.0033).No definite association was observed between the TyG levels and chronic constipation.The weighted generalized additive model findings suggested a more substantial positive association with chronic diarrhea when TyG was less than 9.63(OR=1.89;95%CI:1.05-3.41,P=0.0344),and another positive association with chronic constipation when it was greater than 8.2(OR=1.74;95%CI:1.02-2.95,P=0.0415).The results of the subgroup analyses further strengthen the extrapolation of these results to a wide range of populations.CONCLUSION Higher TyG levels were positively associated with abnormal bowel health.
基金National Natural Science Foundation of China under Grant Nos.51708088 and 51625802the Foundation for High Level Talent Innovation Support Program of Dalian under Grant No.2017RD03
文摘Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method of a structural health monitoring system is using the characteristics of a cable-membrane structure. Taking the Yueyang Sanhe Airport Terminal as an example, a finite element model is established to determine the critical structural components. Next, the engineering requirements and the framework of the monitoring system are studied based on the results of numerical analysis. The specific implementation of the structural health monitoring is then carried out, which includes sensor selection, installation and wiring. The proposed framework is successfully applied to the monitoring system for the Yueyang Airport terminal building, and the synchronous acquisition of fiber Bragg grating and acceleration sensor signals is implemented in an innovative way. The successful implementation and operation of structural health monitoring will help to guarantee the safety of the cablemembrane structure during its service life.
基金supported by Princess Nourah bint Abdulrahman University Researchers Supporting Project Number(PNURSP2022R194)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘In this present time,Human Activity Recognition(HAR)has been of considerable aid in the case of health monitoring and recovery.The exploitation of machine learning with an intelligent agent in the area of health informatics gathered using HAR augments the decision-making quality and significance.Although many research works conducted on Smart Healthcare Monitoring,there remain a certain number of pitfalls such as time,overhead,and falsification involved during analysis.Therefore,this paper proposes a Statistical Partial Regression and Support Vector Intelligent Agent Learning(SPR-SVIAL)for Smart Healthcare Monitoring.At first,the Statistical Partial Regression Feature Extraction model is used for data preprocessing along with the dimensionality-reduced features extraction process.Here,the input dataset the continuous beat-to-beat heart data,triaxial accelerometer data,and psychological characteristics were acquired from IoT wearable devices.To attain highly accurate Smart Healthcare Monitoring with less time,Partial Least Square helps extract the dimensionality-reduced features.After that,with these resulting features,SVIAL is proposed for Smart Healthcare Monitoring with the help of Machine Learning and Intelligent Agents to minimize both analysis falsification and overhead.Experimental evaluation is carried out for factors such as time,overhead,and false positive rate accuracy concerning several instances.The quantitatively analyzed results indicate the better performance of our proposed SPR-SVIAL method when compared with two state-of-the-art methods.
文摘In-process damage to a cutting tool degrades the surfacenish of the job shaped by machining and causes a signicantnancial loss.This stimulates the need for Tool Condition Monitoring(TCM)to assist detection of failure before it extends to the worse phase.Machine Learning(ML)based TCM has been extensively explored in the last decade.However,most of the research is now directed toward Deep Learning(DL).The“Deep”formulation,hierarchical compositionality,distributed representation and end-to-end learning of Neural Nets need to be explored to create a generalized TCM framework to perform eciently in a high-noise environment of cross-domain machining.With this motivation,the design of dierent CNN(Convolutional Neural Network)architectures such as AlexNet,ResNet-50,LeNet-5,and VGG-16 is presented in this paper.Real-time spindle vibrations corresponding to healthy and various faulty congurations of milling cutter were acquired.This data was transformed into the time-frequency domain and further processed by proposed architectures in graphical form,i.e.,spectrogram.The model is trained,tested,and validated considering dierent datasets and showcased promising results.
基金supported by the National Natural Science Foundation of China(Grants No.52079049,U2243223,51609074,51739003,and 51579086).
文摘The material mechanical parameters of the dam body and foundation will change when a dam is reinforced during the aging process.This causes significant changes in the structural state of the project and makes it difficult to ensure its structural safety.In this study,a new deformation warning index for reinforced concrete dams was developed according to the prototype monitoring data,statistical models,three-dimensional finite element model(FEM)numerical simulation,and the critical conditions of the dam structure.A statistical model was established to separate the water pressure component.Then,a three-dimensional FEM of the reinforced concrete dam was constructed to simulate the water pressure component.Furthermore,the deformation components that affected the mechanical parameters of the dam under the same amount of reservoir water level change were separated and quantified accurately.In addition,the method for inversion of comprehensive mechanical parameters after dam reinforcement was used.The influence mechanisms of the deformation behavior of concrete dams under the reservoir water level and temperature changes were investigated.A new deformation warning index was developed by combining the forward-simulated critical water pressure component and temperature component in the period of extreme temperature decrease with the aging component separated by the statistical model.The new deformation warning index considers the structural state of the dam before and after reinforcement and links the structural strength criterion and the deformation evolution mechanisms.It provides a theoretical foundation and decision support for long-term service and operation management of reinforced dams.
文摘Largest portion of the bridge stock in almost any country and bridge owning organisation consists on ordinary bridges that has short or medium spans and are now deteriorating due to aging, etc. Therefore, it is becoming an important social concern to develop and put to practical use simple and efficient health monitoring systems for existing short and medium span (10 - 30 m) bridges. In this paper, one practical solution to the problem for condition assessment of short and medium span bridges was discussed. A vehicle-based measurement with a public bus as part of a public transit system (called “Bus monitoring system”) has been developed to be capable of detecting damage that may affect the structural safety of a bridge from long term vibration measurement data collected while the vehicle (bus) crossed the target bridges. This paper systematically describes how the system has been developed. The bus monitoring system aims to detect the transition from the damage acceleration period, in which the structural safety of an aged bridge declines sharply, to the deterioration period by continually monitoring the bridge of interest. To evaluate the practicality of the newly developed bus monitoring system, it has been field-tested over a period of about four years by using an in-service fixed-route bus operating on a bus route in the city of Ube, Yamaguchi Prefecture, Japan. The verification results thus obtained are also described in this paper. This study also evaluates the sensitivity of “characteristic deflection”, which is a bridge (health) condition indicator used by the bus monitoring system, in damage detection. Sensitivity of “characteristic deflection” is verified by introducing artificial damage into a bridge that has ended its service life and is awaiting removal. As the results, it will be able to make a rational long-term health monitoring system for existing short and mediumspan bridges, and then the system helps bridge administrators to establish the rational maintenance strategies.
文摘The coronavirus disease 2019(COVID-19)has currently caused the mortality of millions of people around the world.Aside from the direct mortality from the COVID-19,the indirect effects of the pandemic have also led to an increase in the mortality rate of other non-COVID patients.Evidence indicates that novel COVID-19 pandemic has caused an inflation in acute cardiovascular mortality,which did not relate to COVID-19 infection.It has in fact increased the risk of death in cardiovascular disease(CVD)patients.For this purpose,it is dramatically inevitable to monitor CVD patients’vital signs and to detect abnormal events before the occurrence of any critical conditions resulted in death.Internet of things(IoT)and health monitoring sensors have improved the medical care systems by enabling latency-sensitive surveillance and computing of large amounts of patients’data.The major challenge being faced currently in this problem is its limited scalability and late detection of cardiovascular events in IoT-based computing environments.To this end,this paper proposes a novel framework to early detection of cardiovascular events based on a deep learning architecture in IoT environments.Experimental results showed that the proposed method was able to detect cardiovascular events with better performance(95.30%average sensitivity and 95.94%mean prediction values).
文摘IOT has carried outimportant function in converting the traditional fitness care corporation.With developing call for in population,traditional healthcare structures have reached their outmost functionality in presenting sufficient and as plenty as mark offerings.The worldwide is handling devastating developingantique population disaster and the right want for assisted-dwelling environments is turning into inevitable for senior citizens.There furthermore a determination by means of the use of way of countrywide healthcare organizations to increase crucial manual for individualized,right blanketed care to prevent and manipulate excessive coronial situations.Many tech orientated packages related to HealthMonitoring have been delivered these days as taking advantage of net boom everywhere on globe,manner to improvements in cellular and in IOT generation.Such as optimized indoor networks insurance,community shape,and fairly-lowdevice fee performances,advanced tool reliability,low device energy consumption,and hundreds higher unusual common usual performance in network safety and privacy.Studies have highlighted fantastic advantages of integrating IOT with health care location and as era is improving the rate also cannot be that terrific of a problem.However,many challenges in this new paradigm shift notwithstanding the fact that exist,that need to be addressed.So the out most purpose of this research paper is 3 essential departments:First,evaluation of key elements that drove the adoption and boom of the Internet of factors based totally domestic some distance off monitoring;Second,present fashionable improvement of IOT in home a long manner off monitoring shape and key building gadgets;Third,communicate future very last effects and distinct guidelines of such type a long way off monitoring packages going ahead.Such Research is a wonderful manner in advance now not outstanding in IOT Terminology but in standard fitness care location.
文摘This paper introduces the satellite system running status and key events.This satellite has been observing the Earth for six years after its launch into a 645 km sun-synchronous orbit.Through the health trend analysis of the platform and subsystems,the orbit,power supply,rotating parts status,temperature,fuel consumption and so on are introduced in detail.The cameras' status also are monitored and analyzed.