Reservoir characteristics and formation model of Upper Carboniferous bauxite series in eastern Ordos Basin,NW China

Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore characteristics of the Upper Carboniferous bauxite series in eastern Ordos Basin were analyzed to reveal the formation and evolution process of the bauxite reservoirs.A petrological nomenclature and classification scheme for bauxitic rocks based on three units(aluminum hydroxides,iron minerals and clay minerals)is proposed.It is found that bauxitic mudstone is in the form of dense massive and clastic structures,while the(clayey)bauxite is of dense massive,pisolite,oolite,porous soil and clastic structures.Both bauxitic mudstone and bauxite reservoirs develop dissolution pores,intercrystalline pores,and microfractures as the dominant gas storage space,with the porosity less than 10% and mesopores in dominance.The bauxite series in the North China Craton can be divided into five sections,i.e.,ferrilite(Shanxi-style iron ore,section A),bauxitic mudstone(section B),bauxite(section C),bauxite mudstone(debris-containing,section D)and dark mudstone-coal section(section E).The burrow/funnel filling,lenticular,layered/massive bauxite deposits occur separately in the karst platforms,gentle slopes and low-lying areas.The karst platforms and gentle slopes are conducive to surface water leaching,with strong karstification,well-developed pores,large reservoir thickness and good physical properties,but poor strata continuity.The low-lying areas have poor physical properties but relatively continuous and stable reservoirs.The gas enrichment in bauxites is jointly controlled by source rock,reservoir rock and fractures.This recognition provides geological basis for the exploration and development of natural gas in the Upper Carboniferous in the study area and similar bauxite systems.

Geological characteristics and models of fault-foldfracture body in deep tight sandstone of the second member of Upper Triassic Xujiahe Formation in Xinchang structural belt of Sichuan Basin,SW China

In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.

Atrypid Brachiopods from the Upper Devonian Wangchengpo Formation(Frasnian)of southern Guizhou,China—Extinction Patterns in the Frasnian of South China

The Wangchengpo Frasnian section of Dushan County contains two atrypid brachiopod assemblages. The lower is characterized by the Atryparia （Costatrypa） dushanensis fauna that appears at the base of the Hejiazhai Member approximately in the falsiovalis to transitans conodont zones： the upper is characterized by the Radiatrypa yangi fauna, which appears in the Lujiazhai Member approximately correspondent with the hassi to Upper rhenana conodont zones. Atrypid brachiopods, together with other brachiopods from the Dushan section show that the Hejiazhai Member is of Frasnian age. Preliminary analyses of Frasnian atrypid brachiopods from sections of South China indicate that there are nine genera and subgenera including Atryparia （Costatrypa）, Kyrtatrypa, Spinatrypa, lsospinatrypa, Spinatrypina, lowatrypa, Desquamatia （Desquamatia）. Desquamatia （Seratrypa）, and Radiatr）pa. Atrypid species diversity did not change much through the Frasnian. On a regional scale in South China, most atrypid species went extinct prior to the Frasnian/Famennian boundary. At any specific locality or section, these atrypids became extinct about 20-40 m below the Frasnian/Famennian （F/F） boundary, within the linguiformis conodont Zone, marking this as the major extinction level. Three new atrypid species are described： Atryparia （Costatrypa） dushanensis, lowatrypa pseudobodini, and Radiatrypa yangi.

The First Stegosaur (Dinosauria, Ornithischia) from the Upper Jurassic Shishugou Formation of Xinjiang, China

A new stegosaur species, Jiangjunosaurusjunggarensis, gen. et sp. nov., is erected based on a specimen collected from the Upper Jurassic upper section of the Shishugou Formation in the Junggar Basin, Xinjiang, China. It represents the first stegosaur from the Jurassic of Xinjiang and increases the diversity of the dinosaur fauna in the Shishugou Formation. The new genus is characterized by symmetrical and proportionally wide tooth crowns, a sub-rectangular axial neural spine seen in lateral view, and large openings on the lateral surfaces of the cervical centra. A preliminary character analysis suggests that this new taxon is more derived than the Middle Jurassic stegosaur Huayangosaurus but more primitive than most other known stegosaur species.

Genesis of the low-permeability reservoir bed of upper Triassic Xujiahe Formation in Xinchang gas field,western Sichuan Depression

The genesis of a reservoir is a result of the combined action of deposition, diagenesis, tectonic reworking, and interaction of rock and fluid and the evolutionary environment. We discuss the genetic and evolution mechanism of a low-permeability reservoir bed of the Xujiahe Formation in the western Sichuan Depression on the basis of the study of diagenesis, diagenetic reservoir facies and the diagenetic evolution sequence. The research indicated that this reservoir bed can be divided into five types of diagenetic reservoir facies, namely strong dissolution, chlorite-lined intergranular pores, compaction and pressure solution, carbonate cementation and secondary quartz increase. There are, however, just two diagenetic reservoir facies which provide low-permeability reservoir beds, namely strong dissolution and chlorite-lined intergranular pores. We also analyzed their diagenetic evolution sequences and the origin of the low-permeability reservoir bed. Besides, it was also indicated that the composition and structure of sandstones, types of sedimentary microfacies, diagenesis history as well as the tectonic reworking in later periods are the main factors controlling the formation of the low-permeability reservoir bed. The above- mentioned factors establish the foundation for the forecasting the distribution of high quality reservoir beds.

Petrophysical and capillary pressure properties of the upper Triassic Xujiahe Formation tight gas sandstones in western Sichuan,China

The tight sandstones of the Upper Triassic Xujiahe Formation（T_3x） constitute important gas reservoirs in western Sichuan.The Xujiahe sandstones are characterized by low to very low porosity （av.5.22%and 3.62%） for the T_3x^4 and T_3x^2 sandstones,respectively）,extremely low permeability（av. 0.060 mD and 0.058 mD for the T_3x^4 and T_3x^2 sandstones,respectively）,strong heterogeneity,micronano pore throat,and poor pore throat sorting.As a result of complex pore structure and the occurrence of fractures,weak correlations exist between petrophysical properties and pore throat size,demonstrating that porosity or pore throat size alone does not serve as a good permeability predictor.Much improved correlations can be obtained between permeability and porosity when pore throat radii are incorporated. Correlations between porosity,permeability,and pore throat radii corresponding to different saturations of mercury were established,showing that the pore throat radius at 20%mercury saturation（R_（20）） is the best permeability predictor.Multivariate regression analysis and artificial neural network（ANN） methods were used to establish permeability prediction models and the unique characteristics of neural networks enable them to be more successful in predicting permeability than the multivariate regression model.In addition, four petrophysical rock types can be identified based on the distributions of R_（20）,each exhibiting distinct petrophysical properties and corresponding to different flow units.

Sedimentary lithofacies characteristics and sweet-spot interval characterization of the Sinian Doushantuo Formation in Upper Yangtze Platform, South China

The Sinian Doushantuo Formation is the oldest shale gas reservoir discovered in the world, which contains good shale gas shows as the Eyangye-1 and Zidi-1 wells in the Yichang Region of western Hubei province, China. The shales in the Doushantuo Formation feature considerable thickness (135 m), high gas content (4.83 m^3/t) and high fragile mineral content (up to 75%). Due to the influences of the sedimentary environment, the shale reservoirs here have high dolomitic content (54%) and abruptly changes in vertical lithofacies. Moreover, the characteristics of the shale sweet-spot differ significantly from that in the Wufeng Formation and Longmaxi Formation in southeast Sichuan Basin. A high-resolution sequence stratigraphic correlation was performed on the shales of the Doushantuo Formation at the Eyangye-1 well, Zidi-1 well, Zidi-2 well and some outcrop profiles in Yichang area for the identification of their sedimentary microfacies characteristics. A comprehensive comparative analysis was made by incorporating the elemental geochemistry, wireline and mud logging data of the well to further identify the sweet-spot interval therein. With the analysis of Eyangye-1 well, the sweet-spot interval of the Doushantuo Formation is 3360?3408 m, of which sedimentary microfacies is deepwater reduced environment with many pyrite laminaes, and the TOC is high to 3.42%, the Ro is 3.3%, the organic and matrix pore are well developed and the aperture more than 50 nm, the porosity is 2.7%, the desorption gas content average is 2.16%, and the main mineral is dolomitic (54%) and siliceous quartz (21%). Additionally, these parameters combined with previous studies will shed light on evaluating and characterizing the layers therein, also provide referential geological data for the following exploration and development activities of this shale system.

Diagenetic and geochemical studies of the Buchan Formation (Upper Devonian) in the Central North Sea

The Upper Devonian Buchan Formation reservoirs in the UK Central North Sea are litharenite/sublitharenite and were deposited in fluvial-aeolian settings. The grain-coating clays in the aeolian sandstones have effectively inhibited quartz overgrowth. Hence, the reduction of reservoir quality is mainly due to mechanical compaction and early dolomite pre- cipitation in both fluvial and aeolian sandstones; quartz overgrowth and kaolinite illitization in fluvial sandstones; and limited smectite illitization in aeolian sandstones. The carbon/oxygen stable isotopes of dolomite cements suggest a predominantly marine carbon source and precipitation temperatures between 25 and 58 ~C indicating a shallow burial depth during dolomite precipitation. The temperatures and the dolomite distribution indicate that the cements originated from the overlying Upper Permian Zechstein carbonates. Extensive quartz overgrowths formed at 80 and 120 ~C in the late and deep diagenetic burial history. The most probable silica source was from feldspar kaolinitization and pressure dissolution of quartz grains. Through detailed petrography and geochemical analyses, the burial-paragenesis-thermal history of the Buchan Formation has been constructed. Similar diagenetic processes are likely to have occurred in the Buchan Formation in other parts of the Central and Northern North Sea. This study may allow new petroleum plays to be considered in areas previously thought to have poor hydrocarbon potential.

The Geochemical Characteristics of Stable Carbon and Oxygen Isotope and Analysis of Diagenetic Environment --A Case Study of Upper Permian Changxing Formation Dolostone in Northeast of Sichuan

四川盆地东北部上二叠统长兴组白云岩为重要的优质储层,近年来,长兴组白云岩成岩环境或成因问题成为研究者讨论的热点话题。在岩石学研究的基础上,运用稳定碳、氧同位素,对研究区长兴组白云岩进行综合研究表明,白云石化具有多期次的特点,按照成岩环境划分为蒸发环境下的准同生白云岩和埋藏条件下的早、中、晚期成岩白云岩。并划分为早、中、晚成岩阶段,结合碳、氧同位素分析结果进一步表明晚成岩阶段白云岩是构造热液白云石化的结果。

Coal petrology,sedimentology and depositional environment of the Parvadeh coais in the Upper Triassic,Tabas Block of Central-East Iran

Peat forming environment strongly influences the economic value of any coal seam and coal-bearing strata.Hence,pal-aeoenvironmental studies provide important information for coal resource exploration.In this context,detailed studies on selected coals from the Parvadeh Area,Iran,were conducted using sedimentology,coal petrology,X-ray diffraction(XRD),scanning electron microscopy-energy dispersive X-ray analyzer(SEM-EDX),and proximate analysis.The sedi-mentary facies above and below the coal seams are mainly marine or marine-influenced facies,supporting that the coal-forming mires in the Parvadeh Area developed in a paralic environment,where the base level must be closely related to sea level.Sulfur contents are moderate to high and mark the influence of brackish/marine water,especially during transgres-sion after peat growth in a lower delta plain environment.The peat-forming mires extended on coastal/delta plain lobes.The lower delta plain/coastal plain coals are characterized by lateral continuity and substantial thickness,whereas few coals possibly representing the upper delta plain are thin and more discontinuous.The detrital nature and composition of the numerous partings and the overall high ash yield in the coal seams indicate an active tectonic area with high rates of creation of accommodation space over peat growth.Coal petrology and coal facies analysis exhibits a permanently high water table within a forest swamp and mostly rheotrophic conditions,sometimes with connection to the seawater.Accord-ing to paleoenvironmental reconstructions,it seems that coal layers may be thicker,with less sulfur(pyrite),but more clastic minerals and partings toward the western part of the area.Although these coal seams presently have low economic potential for the mining operation,partly due to great depth,this humic,high-volatile to medium-volatile bituminous coal may be suitable for exploration of coal bed methane resources.

Characteristics and discovery significance of the Upper Triassic–Lower Jurassic marine shale oil in Qiangtang Basin,China

Mesozoic marine shale oil was found in the Qiangtang Basin by a large number of hydrocarbon geological surveys and shallow drilling sampling.Based on systematic observation and experimental analysis of outcrop and core samples,the deposition and development conditions and characteristics of marine shale are revealed,the geochemical and reservoir characteristics of marine shale are evaluated,and the layers of marine shale oil in the Mesozoic are determined.The following geological understandings are obtained.First,there are two sets of marine organic-rich shales,the Lower Jurassic Quse Formation and the Upper Triassic Bagong Formation,in the Qiangtang Basin.They are mainly composed of laminated shale with massive mudstone.The laminated organic-rich shale of the Quse Formation is located in the lower part of the stratum,with a thickness of 50–75 m,and mainly distributed in southern Qiangtang Basin and the central-west of northern Qiangtang Basin.The laminated organic-rich shale of the Bagong Formation is located in the middle of the stratum,with a thickness of 250–350 m,and distributed in both northern and southern Qiangtang Basin.Second,the two sets of laminated organic-rich shales develop foliation,and various types of micropores and microfractures.The average content of brittle minerals is 70%,implying a high fracturability.The average porosity is 5.89%,indicating good reservoir physical properties to the level of moderate–good shale oil reservoirs.Third,the organic-rich shale of the Quse Formation contains organic matters of types II1 and II2,with the average TOC of 8.34%,the average content of chloroform bitumen'A'of 0.66%,the average residual hydrocarbon generation potential(S1+S2)of 29.93 mg/g,and the Ro value of 0.9%–1.3%,meeting the standard of high-quality source rock.The organic-rich shale of the Bagong Formation contains mixed organic matters,with the TOC of 0.65%–3.10%and the Ro value of 1.17%–1.59%,meeting the standard of moderate source rock.Fourth,four shallow wells(depth of 50–250 m)with oil shows have been found in the organic shales at 50–90 m in the lower part of the Bagong Formation and 30–75 m in the middle part of the Quse Formation.The crude oil contains a high content of saturated hydrocarbon.Analysis and testing of outcrop and shallow well samples confirm the presence of marine shale oil in the Bagong Formation and the Quse Formation.Good shale oil intervals in the Bagong Formation are observed in layers 18–20 in the lower part of the section,where the shales with(S0+S1)higher than 1 mg/g are 206.7 m thick,with the maximum and average(S0+S1)of 1.92 mg/g and 1.81 mg/g,respectively.Good shale oil intervals in the Quse Formation are found in layers 4–8 in the lower part of the section,where the shales with(S0+S1)higher than 1 mg/g are 58.8 m thick,with the maximum and average(S0+S1)of 6.46 mg/g and 2.23 mg/g,respectively.

Hydrothermal Dolomite in the Upper Sinian (Upper Proterozoic) Dengying Formation, East Sichuan Basin, China

Hydrothermal Dolomite （HTD） is present in the Upper Sinian （Upper Proterozoic） Dengying Formation, east Sichuan Basin, China. The strata are comprised by primary dolomite. The HTD has various textures, including zebra dolomite, subhorizontal sheet-like cavities filled by saddle dolomite and breccias cemented by saddle dolomites as well occur as a fill of veins and fractures. Also co-occur MVT type lead-zinc ores in the study area. The δ13C and δ18O isotopes of HTD in the Upper Sinian Dengying Formation are lighter than those of the host rocks, while STSr/86Sr is higher. The apparent difference in carbon, oxygen and strontium isotopes, especially the large difference in S7Sr/S6Sr isotopes ratio indicate crystallization from hot basinal and/or hydrothermal fluids. Saddle dolomite was precipitated at temperatures of 270-320℃. The diagenetic parasequences of mineral assemblage deposited in the Dengying Formation are： （1） dolomite host rock →sphalerite-galena-barite-fluorite; （2） dolomite host rock →saddle dolomite →quartz; （3） dolomite host rock →saddle dolomite→bitumen; （4） dolomite host rock →saddle dolomite →barite. The mean chemical composition of the host dolomite matrix and HTD didn＇t change much during hydrothermal process. The fluids forming the HTDs in the Dengying Formation were mixtures of freshwater from the unconformity at the top of Sinian, fluids from diagenetic compaction and hydrocarbon generation ＆ expulsion from the Lower Cambrian Niutitang Formation mudstones or the Doushantuo Formation silty mudstones, and hydrothermal fluids from the basement. The hydrocarbon reservoirs associated with the HTD were mostly controlled by the basement faults and fractures and karsting processes at the unconformity separating Sinian and Cambrian strata. The hydrocarbon storage spaces of HTD included dissolved cavities and intercrystalline pores. Dissolution cavities are extensive at the top of Dengying Formation, up to about 46m below the unconformity between Sinian and Cambrian and were generated mainly during karstification. Hydrothermal alteration enhanced the reservoir property of the Dengying Formation dolomites with 3%-5% increase in porosity. No agreement has been reached why zebra dolomite occurs only in the Upper Sinian strata, which would indicate that HTD mineralization occurred during two different periods, each of them related to major extensional tectonic event. The early one related to the Xingkai taphrogenesis （Z2-C1） and the later one to the Emei taphrogenesis （D2-T2）. But, all the data from saddle dolomite suggest that the predominant crystallization occurred during the latter event.

Source Rock and Cap Rock Controls on the Upper Ordovician Wufeng Formation–Lower Silurian Longmaxi Formation Shale Gas Accumulation in the Sichuan Basin and its Peripheral Areas

Objective The Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation is one of the priority interval for shale gas exploration in the Sichuan Basin and its peripheral areas, and commercial shale gas has been discovered from this interval in Jiaoshiba, Changning and Weiyuan shale gas fields in Sichuan Province. However, there is no significant discovery in other parts of the basin due to the different quality of black shale and the differences of tectonic evolution. Based on the progress of shale gas geological theory and exploration discoveries, as well as the theory of ＂source rock and cap rock controls on hydrocarbon accumulation＂, of the Upper Ordovician the main controlling factors Wufeng Formation-Lower Silurian Longmaxi Formation shale gas enrichment in the Sichuan Basin and its peripheral areas were analyzed, and the source rock and cap rock controls on the shale gas were also discussed. The results can provide new insights for the next shale gas exploration in this area.

Biostratigraphy and reservoir characteristics of the Ordovician Wufeng Formation-Silurian Longmaxi Formation shale in the Sichuan Basin and its surrounding areas,China

Through graptolite identification in profiles,graptolite zone division,contour map compilation,and analysis of mineral composition,TOC content,lamina distribution features of shale samples,the biostratigraphic and reservoir characteristics of Ordovician Wufeng Formation-Silurian Longmaxi Formation in the Sichuan Basin and its peripheral are sorted out.There are 4 graptolite zones(WF1 to WF4)in Wufeng Formation and 9(LM1 to LM9)in Longmaxi Formation,and the different graptolite zones can be calibrated by lithology and electrical property.The shale layers of these graptolite zones have two depocenters in the southwest and northeast,and differ in mineral composition,TOC,and lamina types.Among them,the graptolite zones of lower WF2 and WF4 are organic matter-poor massive hybrid shale,the upper part of WF1-WF2 and WF3 have horizontal bedding hybrid shale with organic matter,the LM1-LM4 mainly consist of organic-rich siliceous shale with horizontal bedding,and the LM5-LM9 graptolite zones consist of organic-lean hybrid shale with horizontal bedding.The mineral composition,TOC and lamina types of shale depend on the paleo-climate,paleo-water oxidation-reduction conditions,and paleo-sedimentation rate during its deposition.Deposited in oxygen-rich warm water,the lower parts of WF1 and WF2 graptolite zones have massive bedding,low TOC and silicon content.Deposited in cooler and oxygen-rich water,the WF4 has massive bedding,high calcium content and low TOC.Deposited in anoxic water with low rate,the upper part of WF2,WF3,and LM1-LM4 are composed of organic rich siliceous shale with horizontal bedding and high proportion of silt laminae.Deposited in oxygen rich water at a high rate,the graptolite zones LM5-LM9 have low contents of organic matter and siliceous content and high proportions of silt lamina.

Control factors of reservoir oil-bearing difference of Cretaceous Mishrif Formation in the H oilfield, Iraq

To reveal the law of oiliness of the Upper Cretaceous carbonate reservoirs in the Middle East and factors controlling the oiliness, the Mishrif Formation of the H oilfield in Iraq was examined comprehensively. Based on core observation and description, casting thin section analysis, and statistics of physical property and pore-throat structure parameter, etc., in combination with previous achievements and understanding, it is pointed out that the coring interval of Mishrif Formation has strong oiliness heterogeneity, and can be divided into 4 grades, oil rich, oil immersed, oil spot, and oil trace; the oil-bearing grade has obvious facies-controlled characteristic in macroscopic view; and in different oil-bearing grades, relatively oil-rich sections present higher karst development intensity, better physical properties and pore-throat structure characteristics. It is concluded through the study that the sedimentary microenvironment and eogenetic karstification determine the macroscopic oiliness of the reservoir in Mishrif Formation of H Oilfield, and the improvement of pore-throat structure caused by eogenetic karstification is the decisive factor of the micro oil-bearing difference of the reservoir. Finally,the genetic model of reservoir development and oil-bearing difference was established.

Basic characteristics of key interfaces in Upper Ordovician Wufeng Formation – Lower Silurian Longmaxi Formation in Sichuan Basin and its periphery,SW China

Based on anatomy of key areas and data points and analysis of typical features of shell layer in Guanyinqiao Member, basic characteristics of key interfaces, mainly bentonite layers, in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation in the Sichuan Basin and its surrounding areas and the relationship between these key interfaces with the deposition of organic-rich shale have been examined systematically. The Wufeng Formation-Longmaxi Formation has four types of marker beds with interface attributes, namely, the characteristic graptolite belt, Guanyinqiao Member shell layer, section with dense bentonite layers, and concretion section, which can be taken as key interfaces for stratigraphic division and correlation of the graptolite shale. The shell layer in Guanyinqiao Member is the most standard key interface in Wufeng Formation-Longmaxi Formation, and can also be regarded as an important indicator for judging the depositional scale of organic-rich shale in key areas. There are 8 dense bentonite sections of two types mainly occurring in 7 graptolite belts in these formations. They have similar interface characteristics with the shell layer in Guanyinqiao Member in thickness and natural gamma response, and belong to tectonic interfaces(i.e., event deposits). They have three kinds of distribution scales: whole region, large part of the region, and local part, and can be the third, fourth and fifth order sequence interfaces, and have a differential control effect on organic-rich shale deposits. The horizon the characteristic graptolite belt occurs first is the isochronous interface, which is not directly related to the deposition of organic-rich shale. Concretions only appear in local areas, and show poor stability in vertical and horizontal directions, and have no obvious relationship with the deposition of the organic-rich shale.

Stress Distribution in the Upper Shihezi Formation from 1D Mechanical Earth Model and 3D Heterogeneous Geomechanical Model,Linxing Region,Eastern Ordos Basin,Central China

The Upper Shihezi sedimentary rocks in the Linxing region has been estimated with a significant volume of tight sandstone gas.However,lateral distribution of the present-day stress magnitude is poorly understood,which limits further gas production.Hence,a one-dimensional mechanical earth model and a three-dimensional heterogeneous geomechanical model are built to address this issue.The results indicate that the strike-slip stress regime is dominant in the Upper Shihezi Formation.Relatively low stresses are mainly located around wells L-60,L-22,L-40,L-90,etc,and stress distributions exhibit the similarity in the Members H2 and H4.The differential stresses are relatively low in the Upper Shihezi Formation,suggesting that complex hydraulic fracture networks may be produced.Natural fractures in the Upper Shihezi Formation contribute little to the overall gas production in the Linxing region.In addition,the minimum principal stress gradient increases with Young's modulus,suggesting that the stiffer rocks commonly convey higher stress magnitudes.There is a strong interplay between stress distribution and heterogeneity in rock mechanics.Overall,the relative error between the predicted and measured results is less than 10%,implying that the predicted stress distribution is reliable and can be used for subsequent analysis in the Linxing region.

Hydrocarbon generation and storage mechanisms of deepwater shelf shales of Ordovician Wufeng Formation–Silurian Longmaxi Formation in Sichuan Basin, China

As the hydrocarbon generation and storage mechanisms of high quality shales of Upper Ordovician Wufeng Formation– Lower Silurian Longmaxi Formation remain unclear, based on geological conditions and experimental modelling of shale gas formation, the shale gas generation and accumulation mechanisms as well as their coupling relationships of deep-water shelf shales in Wufeng–Longmaxi Formation of Sichuan Basin were analyzed from petrology, mineralogy, and geochemistry. The high quality shales of Wufeng–Longmaxi Formation in Sichuan Basin are characterized by high thermal evolution, high hydrocarbon generation intensity, good material base, and good roof and floor conditions;the high quality deep-water shelf shale not only has high biogenic silicon content and organic carbon content, but also high porosity coupling. It is concluded that:(1) The shales had good preservation conditions and high retainment of crude oil in the early times, and the shale gas was mainly from cracking of crude oil.(2) The biogenic silicon(opal A) turned into crystal quartz in early times of burial diagenesis, lots of micro-size intergranular pores were produced in the same time;moreover, the biogenic silicon frame had high resistance to compaction, thus it provided the conditions not only for oil charge in the early stage, but also for formation and preservation of nanometer cellular-like pores, and was the key factor enabling the preservation of organic pores.(3) The high quality shale of Wufeng–Longmaxi Formation had high brittleness, strong homogeneity, siliceous intergranular micro-pores and nanometer organic pores, which were conducive to the formation of complicated fissure network connecting the siliceous intergranular nano-pores, and thus high and stable production of shale gas.

Revision of the Clam Shrimp Genus Magumbonia from the Upper Jurassic of the Luanping Basin,Hebei,Northern China

The diverse clam shrimp Nestoria-Keratestheria fauna is widely distributed in the Dabeigou Formation in northern Hebei and eastern Inner Mongolia of China. Its important component genus Magumbonia from the Dabeigou Formation in the Luanping Basin, northern Hebei, China, is revised on the basis of a scanning electron microscope （SEM） examination of the type species M.jingshangensis Wang, 1984, which revealed morphological features not recognized previously. These include coarse reticulation on the umbo and prominent growth lines ornamented with densely spaced, small tubercles and fine lirae.