Effect of process parameters on the morphology of aluminum/copper alloy lap joints by red and blue hybrid laser welding

In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.

Effect of hot-dip galvanizing processes on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel

A C–Mn dual-phase steel was soaked at 800°C for 90 s and then either rapidly cooled to 450°C and held for 30 s(process A) or rapidly cooled to 350°C and then reheated to 450°C(process B) to simulate the hot-dip galvanizing process. The influence of the hot-dip galvanizing process on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel(DP600) was investigated using optical microscopy, scanning electron microscopy(SEM), transmission electron microscopy(TEM), and tensile tests. The results showed that, in the case of process A, the microstructure of DP600 was composed of ferrite, martensite, and a small amount of bainite. The granular bainite was formed in the hot-dip galvanizing stage, and martensite islands were formed in the final cooling stage after hot-dip galvanizing. By contrast, in the case of process B, the microstructure of the DP600 was composed of ferrite, martensite, bainite, and cementite. In addition, compared with the yield strength(YS) of the DP600 annealed by process A, that for the DP600 annealed by process B increased by approximately 50 MPa because of the tempering of the martensite formed during rapid cooling. The work-hardening coefficient(n value) of the DP600 steel annealed by process B clearly decreased because the increase of the YS affected the computation result for the n value. However, the ultimate tensile strength(UTS) and elongation(A80) of the DP600 annealed by process B exhibited less variation compared with those of the DP600 annealed by process A. Therefore, DP600 with excellent comprehensive mechanical properties(YS = 362 MPa, UTS = 638 MPa, A_(80) = 24.3%, n = 0.17) was obtained via process A.

Dual Processes and Compapison Theorem of Superprocesses Random Environents

In this paper, we give the dual processes for superprocesses in random environments constructed by L Mytnik and the comparison theorem of these superprocesses with Dawson-Watanabe superprocesses.

Study of the Combustion Process inside an Ethanol-Diesel Dual Direct Injection Engine Based on a Non-Uniform Injection Approach

The use of ethanol is a promising method to reduce the emissions of diesel engines.The present study has been based on the installation of a gasoline electronic injection system in a single-cylinder diesel engine to control the amount of ethanol entering the cylinder during the compression(while diesel has been injected into the cylinder by the original pump injection system).The injection time has been controlled by crank angle signal collected by an AVL angle indicator.In the tests ethanol and diesel each accounted for half of the fuel volume,and the total heat energy supply of the fuel was equivalent to that of the diesel under the operating conditions of the original engine.A three-dimensional combustion model of the diesel engine has been implemented by using the CFD software FIRE.Simulations have been carried out assuming uniform and non-uniform injections rate for the different holes and the different results have been compared.According to these results,a non-uniform injection rate can produce early ignition and cause an increase in the maximum in-cylinder pressure and the maximum average incylinder temperature.Moreover,in such conditions NO emissions are larger while soot emission is slightly lower.

On the Convergence of the Dual-Pivot Quicksort Process

Sorting an array of objects such as integers, bytes, floats, etc is considered as one of the most important problems in Computer Science. Quicksort is an effective and wide studied sorting algorithm to sort an array of n distinct elements using a single pivot. Recently, a modified version of the classical Quicksort was chosen as standard sorting algorithm for Oracles Java 7 routine library due to Vladimir Yaroslavskiy. The purpose of this paper is to present the different behavior of the classical Quicksort and the Dual-pivot Quicksort in complexity. In Particular, we discuss the convergence of the Dual-pivot Quicksort process by using the contraction method. Moreover we show the distribution of the number of comparison done by the duality process converges to a unique fixed point.

Temperature fault-tolerant control system of CSTR with coil and jacket heat exchanger based on dual control and fault diagnosis

For the characteristics of the continuous stirred-tank reactor(CSTR) with coil and jacket cooling system,a CSTR temperature dual control solution based on the analysis of the CSTR exothermic reaction control characteristic was proposed for an organic material polymerization production.The control solution has passive fault-tolerant ability for the jacket cooling water cutting off fault and active fault-tolerant potential for the coil cooling water cutting off fault,and it has good control ability,high saving energy and reducing consumption performance.Fault detection and diagnosis and fault-tolerant control strategy are designed for the coil cooling fault to achieve the active fault-tolerant control function.The CSTR temperature dual control,process fault detection and diagnosis and active fault-tolerant control were full integrated into the CSTR temperature fault-tolerant control system,which achieve fault tolerance control of CSTR temperature for any severe malfunction of jacket cooling or coil cooling cutting off,and the security for CSTR exothermic reaction is improved.Finally,the effectiveness of this system was validated by semi-physical simulation experiment.

Principle and Process Window of Cerium Dioxide Thin Film Fabrication with Dual Plasma Deposition

Cerium dioxide, CeO2, is a potentially superior material in a myriad of areas, and many methods have been proposed to deposit single crystal CeO2 thin films. A novel fabrication technique utilizing dual plasma generated by metal vacuum arc (MEVVA) and radio frequency (RF) is discussed in this paper. We have recently conducted a systematic investigation to determine the optimal process window to deposit CeO2 thin films'on Si(100) substrates. The X-ray diffraction results show the existence of CeO2(100) in the as-deposited sample.

The process development and product application of Tisco DSS

DSS have high strength,high corrosion resistance and good welding properties.Comparing with the same corrosion resistance level austenitic stainless steel,DSS decrease largely Ni content and realize the thinning of thickness design to perfectly optimize properties and decrease costs.Now DSS have been widely used in many fields such as petroleum,chemical industry,paper production,shipbuilding,nuclear power, seawater desalting,vacuum salt production and architecture.Tisco have began the process development and product application research of DSS products from last century and gradually solved a lot of technical problems such as AOD nitrogen alloying control of various content DSS,high temperature deformation mechanism of thermal process,large deformation hot rolling process of coils,the effect of bad phase precipitated during hot treatment process on properties and high efficiency pickling of high Cr/Mo content DSS plates.The various alloy content DSS plates and wide cold rolling coils(3Re60,S32101,S32304, S31803,S32205,S32750 and SUS329J4L) were successfully developed and used in national important constructions,key industries and abroad projects.

Innovation and development about dual process control of English writing training

This text combined actual teaching to conduct the discussion on how to innovate a pair of course to control the writing to train, explain the understanding of teaching method of pair of course of this text, summarize the concrete method from 7 respects, expect to exchange in launching a pair of course and controlling the concrete operation that the writing trains with everybody, share the teaching experience and realize, by improving and upgrading the teaching level of writing of English. This text thinks that it reflects that innovative thinking is in teaching to innovate and experience the course, the activity course of teaching should not understand analyzing the content of the teaching material and proposition composition are practised, but run through its cognition in experiencing the course dynamically in the real classroom, course, experience, interdynamic, teachers and students participate in teaching new idea and spiritual essence of study together.

Interaction between semantic and phonological processes in stuttering Evidence from the dual-task paradigm

Stuttering is a common neurological deficit and its underlying cognitive mechanisms are a matter of debate, with evidence suggesting abnormal modulation between speech encoding and other cognitive components. Previous studies have mainly used single task experiments to investigate the disturbance of language production. It is unclear whether there is abnormal interaction between the three language tasks （orthographic, phonological and semantic judgment） in stuttering patients. This study used dual tasks and manipulated the stimulus onset asynchrony （SOA） between tasks 1 and 2 and the nature of the second task, including orthographic, phonological, and semantic judgments. The results showed that the performance records of orthographic judgment, phonological judgment, and semantic judgment were significantly reduced between the patient and control groups with short SOA （P 〈 0.05）. However, different patterns of interaction between task 2 and SOA were observed across subject groups： subjects with stuttering were more strongly modulated by SOA when the second task was semantic judgment or phonological judgment （P 〈 0.05）, but not in the orthographic judgment experiment （P 〉 0.05）. These results indicated that the interaction mechanism between semantic processing and phonological encoding might be an underlying cause for stuttering.

The effect of the fracture distribution on CO_2 injection into a coal seam

The effect of the fracture distribution on CO 2 injection into coal seams was studied with a heterogeneous model having dual porosity to represent both the primary medium (the coal matrix) and the secondary medium (the fractures) under variable stress conditions. A numerical generation method and a digital image processing method were used to model the heterogeneous fracture distribution in the coal. The model solutions demonstrate that: (1) the fractures are the main channel for gas flow and their distribution has an important impact on the gas injection rate; (2) the fractures only affect the injection rate of CO 2 into the coal but not the final storage amount; (3) when gas is injected into coal the fractures will first expand and then close due to the changing effective stresses and the adsorption induced swelling of coal grains. This fully coupled dual-porosity model with a heterogeneous fracture distribution provides a way to predict the CO 2 injection into a coal seam.

On a Class of Dual Model with Divided Threshold

In this paper, we consider the dual of the generalized Erlang (n) risk model under a threshold dividend strategy. We derive an integrodifferential equation satisfied by the expectation of the discounted dividends until ruin. The case when profits follow an exponential distribution is solved.

Design of logic process based low-power 512-bit EEPROM for UHF RFID tag chip

A 512-bit EEPROM IP was designed by using just logic process based devices.To limit the voltages of the devices within 5.5 V,EEPROM core circuits,control gate(CG) and tunnel gate(TG) driving circuits,DC-DC converters:positive pumping voltage(VPP=4.75 V) ,negative pumping voltage(VNN=4.75 V) ,and VNNL(=VNN/2) generation circuit were proposed.In addition,switching powers CG high voltage(CG_HV) ,CG low voltage(CG_LV) ,TG high voltage(TG_HV) ,TG low voltage(TG_LV) ,VNNL_CG and VNNL_TG switching circuit were supplied for the CG and TG driving circuit.Furthermore,a sequential pumping scheme and a new ring oscillator with a dual oscillation period were proposed.To reduce a power consumption of EEPROM in the write mode,the reference voltages VREF_VPP for VPP and VREE_VNN for VNN were used by dividing VDD(1.2 V) supply voltage supplied from the analog block in stead of removing the reference voltage generators.A voltage level detector using a capacitive divider as a low-power DC-DC converter design technique was proposed.The result shows that the power dissipation is 0.34μW in the read mode,13.76μW in the program mode,and 13.66μW in the erase mode.

Effect of intercritical annealing on microstructure,mechanical properties,and work-hardening behavior of ultrahigh-strength dual-phase steels with different silicon contents

In this study,three kinds of dual-phase(DP) steels were used to investigate the influence of silicon content and intercritical annealing temperature on their microstructures,mechanical properties,and work-hardening behaviors. By adding silicon and matching the critical annealing temperature,a new DP steel(1.0Si and intercritically annealed at 790 ℃) that exhibits an excellent combination of ultrahigh strength and adequate ductility was obtained. Variations in the strength,elongation,and fracture mechanism of the specimens with respect to different intercritical annealing temperatures were correlated to microstructural features. With an increase in the silicon content,there is no significant change in the martensitic band structure or ferrite morphology. At the same annealing temperature,the yield strength and yield strength ratio of the specimens decreased,but at different annealing temperatures,the tensile strength was reduced. The Hollomon analysis results indicate that the workhardening behavior obeys a two-stage work-hardening mechanism. With an increasing intercritical annealing temperature,the "transition strain"shifts to the left,and with an increasing silicon content,the "transition strain"shifts to the right. The surface exhibits ductile fractures characterized by a high density of microvoid dimples. With an increase in the silicon content,the average dimple size on the fracture surface decreases and the plasticity of the material increases.

EFFECT OF TRACE B AND Ga ON TRANSFORMATION CONTROL OF Mn-Si-Cr AS-ROLLED DUAL PHASE STEELS

Trace of B and Ga can substitute for Mo in Mn-Si-Cr dual phase steels.The technological process and CCT curves of steels treated with B and Ga are similar to those for Mn-Si-Cr-Mo steel.

Magnetic properties of misch-metal partially substituted Nd–Fe–B magnets sintered by dual alloy method

The misch-metal （MM） partially substituted Nd-Fe-B sintered magnets were fabricated by the dual alloy method, and the crystal structure, microstructure, and magnetic properties were analyzed comprehensively. X-ray diffraction （XRD） reveals that the increasing content of the MM has an inconsiderable effect on the crystallographic alignment of the magnets. Grains of the two main phases are uniformly distributed, and slightly deteriorate on the grain boundary. Due to the diffusion between the adjacent grains, the MM substituted Nd-Fe-B magnets contain three types of components with different Ce/La concentrations. Moreover, the first-order reversal curve （FORC） diagram is introduced to analyze the magnetization reversal process, coercivity mechanism, and distribution of reversal field in magnetic samples. The analysis indicates that there are two major reversal components, corresponding to the two different main phases. The domain nucleation and growth are determined to be the leading mechanism in controlling the magnetization reversal processes of the magnets sintered by the dual alloy method.

Decomposition of Supercritical Linear-Fractional Branching Processes

It is well known that a supercritical single-type Bienayme-Galton-Watson process can be viewed as a decomposable branching process formed by two subtypes of particles: those having infinite line of descent and those who have finite number of descendants. In this paper we analyze such a decomposition for the linear-fractional Bienayme-Galton-Watson processes with countably many types. We find explicit expressions for the main characteristics of the reproduction laws for so-called skeleton and doomed particles.

COUPLING MODEL OF TWO PHASE FLOW IN A FRACTURE-ROCK MATRIX SYSTEM AND ITS STOCHASTIC FEATURE ANALYSIS

This study is concerned with developing a two-dimensional two-phase model that simulate the movement of non-aqueous phase liquid (NAPL) in a fracture-rock matrix system. The intrinsic permeability and the fracture aperture are represented in the model via its KarhunenLoeve expansion. Other parameters and the nodal unknowns, water saturations and water pressures, are represented by their stochastic spectral expansions. The errors resulting from truncation of Karhunen - Loeve and polynomial chaos expansions to a finite number of terms are analyzed. The eigenvalues of stochastic process is found out for any point in the special domain of the problem at any instant in time.

Theories behind a nursing intern’s error in terms of clinical decision-making

Clinical decision-making and judgment is an essential skill that should be acquired by nursing interns.However,many studies reveal that a large proportion of nursing interns have difficulty in meeting the basic expectation of clinical decision-making.This article begins with a brief review of some theories related to clinical decision-making.Then it takes a case,for example,to show how the wrong decision is made.Furthermore,it makes a general analysis on the case drawing on the concept of bounded rationality,dual-process model,and skills acquisition theory.This article ends with some reflections from the case,to improve the consciousness and skills in decision-making for nursing interns.

Experimental Study of Methods of Scenario Lattice Construction for Stochastic Dual Dynamic Programming

The stochastic dual dynamic programming (SDDP) algorithm is becoming increasingly used. In this paper we present analysis of different methods of lattice construction for SDDP exemplifying a realistic variant of the newsvendor problem, incorporating storage of production. We model several days of work and compare the profits realized using different methods of the lattice construction and the corresponding computer time spent in lattice construction. Our case differs from the known one because we consider not only a multidimensional but also a multistage case with stage dependence. We construct scenario lattice for different Markov processes which play a crucial role in stochastic modeling. The novelty of our work is comparing different methods of scenario lattice construction. We considered a realistic variant of the newsvendor problem. The results presented in this article show that the Voronoi method slightly outperforms others, but the k-means method is much faster overall.