Investigation into the Methodology and Implementation of Life Cycle Engineering under China’s Carbon Reduction Target in the Process Industry

The industrial sector is the primary source of carbon emissions in China.In pursuit of meeting its carbon reduction targets,China aims to promote resource consumption sustainability,reduce energy consumption,and achieve carbon neutrality within its processing industries.An effective strategy to promote energy savings and carbon reduction throughout the life cycle of materials is by applying life cycle engineering technology.This strategy aims to attain an optimal solution for material performance,resource consumption,and environmental impact.In this study,five types of technologies were considered:raw material replacement,process reengineering,fuel replacement,energy recycling and reutilization,and material recycling and reutilization.The meaning,methodology,and development status of life cycle engineering technology abroad and domestically are discussed in detail.A multidimensional analysis of ecological design was conducted from the perspectives of resource and energy consumption,carbon emissions,product performance,and recycling of secondary resources in a manufacturing process.This coupled with an integrated method to analyze carbon emissions in the entire life cycle of a material process industry was applied to the nonferrous industry,as an example.The results provide effective ideas and solutions for achieving low or zero carbon emission production in the Chinese industry as recycled aluminum and primary aluminum based on advanced technologies had reduced resource consumption and emissions as compared to primary aluminum production.

Analysis and Related Suggestions on the Whole Process Engineering Consulting Service Mode at Home and Abroad

This paper first introduces the basic connotation of China’s whole-process engineering consulting.Immediately,analyze the organization model,service procurement model and charging standards of foreign whole-process engineering consulting(international terminology full-life cycle engineering consultant).Second,discuss the government’s role in the development of engineering consulting from two aspects:service management and market access.Finally,combined with the above analysis,the specific problems faced in the implementation process of the whole process engineering consulting are compared.Provide relevant suggestions on how companies and individuals respond to industry development trends.

APPLICATION OF GREY SYSTEM THEORY TO PROCESSING OF MEASURING DATA IN REVERSE ENGINEERING

The processing of measuri ng data plays an important role in reverse engineering. Based on grey system the ory, we first propose some methods to the processing of measuring data in revers e engineering. The measured data usually have some abnormalities. When the abnor mal data are eliminated by filtering, blanks are created. The grey generation an d GM(1,1) are used to create new data for these blanks. For the uneven data sequ en ce created by measuring error, the mean generation is used to smooth it and then the stepwise and smooth generations are used to improve the data sequence.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Review on the study of metallurgical process engineering

After nearly one hundred years of research, metallurgy(metallurgical science and engineering) has gradually become a system with three levels of knowledge:(1) micro metallurgy at the atomic/molecular scale,(2) process metallurgy at the procedure/device, and(3) macrodynamic metallurgy at the full process/process group. Macro-dynamic metallurgy development must eliminate the concept of an "isolated system" and establish concepts of "flow," "process network," and "operating program" to study the "structure–function–efficiency" in the macrodynamic operation of metallurgical manufacturing processes. It means considering "flow" as the ontology and observing dynamic change by"flow" to solve the green and intelligent potential of metallurgical enterprises. Metallurgical process engineering is integrated metallurgy, toplevel designed metallurgy, macro-dynamic operated metallurgy, and engineering science level metallurgy. Metallurgical process engineering is a cross-level, comprehensive, and integrated study of the macro-dynamic operation of manufacturing processes. Metallurgical process engineering studies the physical nature and constitutive characteristics of the dynamic operation of steel manufacturing process, as well as the analysis-optimization of the set of procedure functions, coordination-optimization of the set of procedures' relations, and reconstruction-optimization of the set of procedures in the manufacturing process. The study establishes rules for the macro operation of the manufacturing process, as well as dynamic and precise objectives of engineering design and production operation.

Construction and Practices of the Course of Software Process&Tools Oriented Certified in Engineering Education

In recent years,it is the general trend to adopt the standards of international engineering education certification to construct curriculum.“Software Process and Tools”is one of the core courses of Harbin Institute of Technology’s software engineering undergraduate training program.Focusing on the construction work and practical exploration of the course in the process of reforming the software engineering professional curriculum system,and how to achieve the standards of engineering education certification,This paper makes a review and summary.This paper focuses on the status and the role of the course in the whole curriculum system,as well as project-driven teaching content design and practical teaching methods.And summarizes the experience and results of 3 rounds of teaching practice.

Strategies for Improving the Effectiveness of Professional Practice for Full-Time Professional Master Degree Postgraduate in Mineral Processing Engineering

In order to gain practical experience and hands-on skills,full-time professional master degree postgraduate in mineral processing engineering should engage in professional practices.Nonetheless,a series of problems,including insufficient time for practice,low management level,inadequate implementation of the double-supervisor system,and poor results of professional practice,has reduced the effectiveness of professional practice.In view of the aforementioned problems and the characteristics of the discipline,this paper proposes several strategies for improving the effectiveness of professional practice for postgraduates in mineral processing engineering.

Evaluation of Environmental Sound Pressure Level,Drawing of Noise-Isosonic Map Using Surfer V.19,and Prioritization of Engineering Noise Control Methods Using the Analytic Hierarchy Process(AHP):A Field Study in CGS Stations

Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments.Due to the high costs of exposure to excessive noise;continuous sound evaluation,propose and implement noise control plans in occupational environments is necessary.Thus,the present study aimed to review environmental sound measurements,drawing of noise maps,and prioritizing the engineering noise control methods using the Analytic Hierarchy Process(AHP).This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations(CGSs)of Kerman,Iran in 2021.The present study was done in two phases.In the first phase,six CGSs were investigated to measure and evaluate the noise.In addition,the noise map of a CGS was drawn using the Surfer software.Finally,the AHP was used in the second phase of the research to prioritize the control measures.In this phase,four criteria and ten alternatives were identified.According to first phase results,the sound pressure level(SPL)of the stations varied from 76 to 98 dBA.Besides,the majority of the studied stations had a sound level higher than 85 dBA(danger zone).The second phase of the study showed that out of the four evaluated criteria,the executability criterion had the highest impact and the cost criterion had the lowest impact on the selection of control measures with a weight of 0.587 and 0.052,respectively.Based on the results of prioritization of the alternatives,using a silenced regulator(weight of 0.223)and increasing the thickness of the tube(weight of 0.023)had the highest and lowest priorities among the alternatives,respectively.The use of engineering noise control methods such as using silenced regulators was the best way to control the noises of CGSs.Additionally;it is noteworthy that AHP is a practical method for prioritizing alternatives to achieve the most accurate decision-making.The results of AHP can be of great help to health and safety experts and managers in choosing the sound engineering control measures more precisely.

The application of business process re-engineering in Chinese enterprises

After joining in WTO,Chinese enterprises face more intense competitive environments. The problems, such as many foreign capital enterprises swarming into China, increasing market competitive ability, keeping on national and international market, have become more serious to enterprise’s decision maker. At the same time, the information technology is developing quickly, then business process re engineering will become valid path for enterprise increasing market competitive ability. As a case study, this paper applies Business Process Re engineering(BPR) approach to analyze a Chinese company.

Discussion on the Teaching of“Metallic Mineral Processing”for Mineral Processing Engineering

Social economic growth and the increasing demand for mineral resources have promoted the development of metallic mineral processing technology.Therefore,in order to satisfy the demands for development in mining,cultivating comprehensive mineral processing engineering professionals with strong innovative practical skills has become the top priority in current education.We have established a new course,“Metallic Mineral Processing,”for students majoring in mineral processing engineering in universities,with coal and other sources of energy as the main focus.This paper analyzes the purpose and significance of setting up this course and the exploration of the reform of the teaching mode,with the aim of improving the teaching quality and ensuring the cultivation of mineral processing engineering undergraduates.

State of the Art Manufacturing and Engineering of Nanocellulose: A Review of Available Data and Industrial Applications

This review provides a critical overview of the recent methods and processes developed for the production of cellulose nanoparticles with controlled morphology, structure and properties, and also sums up (1) the processes for the chemical modifications of these particles in order to prevent their re-aggregation during spray-drying procedures and to increase their reactivity, (2) the recent processes involved in the production of nanostructured biomaterials and composites. The structural and physical properties of those nanocelluloses, combined with their biodegradability, make them materials of choice in the very promising area of nanotechnology, likely subject to major commercial successes in the context of green chemistry. With a prospective and pioneering approach to the subject matter, various laboratories involved in this domain have developed bio-products now almost suitable to industrial applications;although some important steps remain to be overcome, those are worth been reviewed and supplemented. At this stage, several pilot units and demonstration plants have been built to improve, optimize and scale-up the processes developed at laboratory scale. Industrial reactors with suitable environment and modern control equipment are to be expected within that context. This review shall bring the suitable processing dimension that may be needed now, given the numerous reviews outlining the product potential attributes. An abundant literature database, close to 250 publications and patents, is provided, consolidating the various research and more practical angles.

Industrial application prospects and key issues of the pure-hydrogen reduction process

The industrial application prospect and key issues in basic theory and application are discussed by the methods of theoretical analysis and calculation to promote the development of the pure-hydrogen reduction process.According to the discussion of thermodynamics and kinetics of pure-hydrogen reduction reaction,the reduction reaction of iron oxide by pure hydrogen is an endothermic reaction,and the reaction rate of hydrogen reduction is significantly faster than that of carbon reduction.To explore the feasibility of the industrial applications of pure-hydrogen reduction,we design the hydrogen reduction reactor and process with reference to the industrialized hydrogen-rich reduction process and put forward the methods of appropriately increasing the reduction temperature,pressure,and temperature of iron ore into the furnace to accelerate the reaction rate and promote the reduction of iron oxide.The key technical parameters in engineering applications,such as hydrogen consumption,circulating gas volume,and heat balance,are discussed by theoretical calculations,and the optimized parameter values are proposed.The process parameters,cost,advantages,and disadvantages of various current hydrogen production methods are compared,and the results show that hydrogen production by natural gas reforming has a good development prospect.Through the discussion of the corrosion mechanism of high-temperature and high-pressure hydrogen on heat-resistant steel materials and the corrosion mechanism of H_2S in the hydrogen gas on steel,the technical ideas of developing new metal temperature-resistant materials,metal coating materials,and controlling gas composition are put forward to provide guidance for the selection of heater and reactor materials.Finally,the key factors affecting the smooth operation of the hydrogen reduction process in engineering applications are analyzed,offering a reference for the industrial application of the purehydrogen reduction process.

In-situ experiment investigations of hydrothermal process of highway in deep seasonal frozen soil regions of Inner Mongolia, China

To reveal the influencing factors and changing rules for the hydrothermal interaction process of highway subgrade, the field measurements of Shiwei-Labudalin Highway in Inner Mongolia, China was conducted for 3 years, based on which the freezing-thawing rules and water content changing characteristics were analyzed. The main results show the subgrade presents a frequent freezing-thawing alternation, and the water content of subgrade exhibits an obvious seasonal alternation. The subbase has the maximum water content, while the base has the minimum water content. The change of water flux is concentrated in the thawing period and consistent with the change of temperature gradient. The subbase layer has the most active water flux due to the heat absorption and impermeability of pavement that easily causes the water accumulation in this layer. Therefore, the prevention and treatment for the freezing-thawing disease should be started from heat insulation and water resistance.

Geometrical Reconstruction and CNC Process of Spurious Tympanic Membrane Based on Reverse Engineering

Perforation of tympanic membrane is one of the main reasons for both deafness and dyssaudia.We could improve and restore audition by restoring or replacing the tympanic membrane.So,whether you can make the spurious tympanic membrane successfully is one of the keys to a successful operation.Utilizing CMM (Coordinate Measuring Machine) measurement equipment, we measured tympanic membrane model precisely and digitally.We also analysed the measured data by point to surface and we have successfully reconstructed the CAD model of the spurious tympanic membrane.Using the model we have got,we schemed out the mold of spurious tympanic membrane.In addition,we utilized MasterCAM compiling CNC (Computerized Numerical Con- trol) code and simulating the course of working.Ultimately,we obtained the mold of spurious tympanic membrane.Our research in this article has great significance to the success of spurious tympanic membrane grafting operation.

Data-driven optimal operation of the industrial methanol to olefin process based on relevance vector machine

Methanol to olefin(MTO)technology provides the opportunity to produce olefins from nonpetroleum sources such as coal,biomass and natural gas.More than 20 commercial MTO plants have been put into operation.Till now,contributions on optimal operation of industrial MTO plants from a process systems engineering perspective are rare.Based on relevance vector machine(RVM),a data-driven framework for optimal operation of the industrial MTO process is established to fully utilize the plentiful industrial data sets.RVM correlates the yield distribution prediction of main products and the operation conditions.These correlations then serve as the constraints for the multi-objective optimization model to pursue the optimal operation of the plant.Nondominated sorting genetic algorithmⅡis used to solve the optimization problem.Comprehensive tests demonstrate that the ethylene yield is effectively improved based on the proposed framework.Since RVM does provide the distribution prediction instead of point estimation,the established model is expected to provide guidance for actual production operations under uncertainty.

Development of Optimal Maintenance Policies for Offshore Wind Turbine Gearboxes Based on the Non-homogeneous Continuous-Time Markov Process

Gearbox in offshore wind turbines is a component with the highest failure rates during operation. Analysis of gearbox repair policy that includes economic considerations is important for the effective operation of offshore wind farms. From their initial perfect working states, gearboxes degrade with time, which leads to decreased working efficiency. Thus, offshore wind turbine gearboxes can be considered to be multi-state systems with the various levels of productivity for different working states. To efficiently compute the time-dependent distribution of this multi-state system and analyze its reliability, application of the nonhomogeneous continuous-time Markov process(NHCTMP) is appropriate for this type of object. To determine the relationship between operation time and maintenance cost, many factors must be taken into account, including maintenance processes and vessel requirements. Finally, an optimal repair policy can be formulated based on this relationship.

HV Process Model of Software Development

Software Development Life Cycle (SDLC) is one of the major ingredients for the development of efficient software systems within a time frame and low-cost involvement. From the literature, it is evident that there are various kinds of process models that are used by the software industries for the development of small, medium and long-term software projects, but many of them do not cover risk management. It is quite obvious that the improper selection of the software development process model leads to failure of the software products as it is time bound activity. In the present work, a new software development process model is proposed which covers the risks at any stage of the development of the software product. The model is named a Hemant-Vipin (HV) process model and may be helpful for the software industries for development of the efficient software products and timely delivery at the end of the client. The efficiency of the HV process model is observed by considering various kinds of factors like requirement clarity, user feedback, change agility, predictability, risk identification, practical implementation, customer satisfaction, incremental development, use of ready-made components, quick design, resource organization and many more and found through a case study that the presented approach covers many of parameters in comparison of the existing process models. .

Do Multiple Isolated Vertebral Thoracolumbar Transverse Process Fractures Increase the Risk of Ligamentous Injury and Surgical Intervention in the Setting of Trauma?

Background: Isolated thoracolumbar vertebral transverse process fractures (TPF) are often considered a stable injury. However, the use of advanced imaging such as magnetic resonance imaging and spine specialist consultation are often ordered as part of the routine workup of these fractures. The routine ordering of advanced imaging, spine specialist consultation, and delayed mobilization causes unnecessary economic and clinical burdens to patients and the overall healthcare system. Purpose: To determine if a higher number of isolated TPFs (iTPFs) lead to an increase in ligamentous injury to the spine, and whether ligamentous injury—if present—requires surgical intervention. Methods: The retrospective review was performed from 2009 to 2015, using a surgical trauma database to identify patients with greater than 3 isolated TPF (iTPF) to determine if iTPF leads to an increase in ligamentous injury to the spine and if this increase leads to increased surgical intervention. Results: A total of 102 patients were identified with complete follow up at 6 - 8 weeks post injury. The majority of the included patients suffered from blunt trauma. There was a small rate of ligamentous injury (n = 7, 7%) that did not require additional treatment. None of the fractures included were considered unstable. None of the patients included required surgical intervention during their hospital visit or in follow up visits. Conclusion: iTPFs are a stable injury to the thoracolumbar spine. There is a small rate of associated ligamentous injury that does not change the management or require further interventions. Thoracolumbar iTPFs do not automatically need spine specialist consultation and advanced imaging techniques.

Task Decomposition Technique's Deduction and Application of Product Developing Process in Concurrent Engineering

Task decomposition is a kind of powerful technique increasingly being used within industry as a pathway for achieving product's developing success. In this paper, topology's concept in modern mathematics is used for task decomposition technique's deduction in product developing process. It puts fonvard the views of resolvability, measurability and connectivity of tasks and their practi-cal principles. Combined with an example of developing the typical mechanical product, it ex-plains the implementing method of task decomposition in Concurrent Engineering (CE).

Evolution process of rock mass engineering system using systems science

The rock mass engineering system （RMES） basically consists ofrock mass engineering （RME）, water system and surroundingecological environments, etc. The RMES is characterized by nonlinearity,occurrence of chaos and self-organization （Tazaka, 1998;Tsuda, 1998; Kishida, 2000）. From construction to abandonmentof RME, the RMES will experience four stages, i.e. initial phase,development phase, declining phase and failure phase. In thiscircumstance, the RMES boundary conditions, structural safetyand surrounding environments are varied at each phase, so arethe evolution characteristics and disasters （Wang et al., 2014）.