Enhancing Hygrothermal Performance in Multi-Zone Constructions through Phase Change Material Integration

As buildings evolve to meet the challenges of energy efficiency and indoor comfort,phase change materials(PCM)emerge as a promising solution due to their ability to store and release latent heat.This paper explores the transformative impact of incorporating PCMon the hygrothermal dynamics of multi-zone constructions.The study focuses on analyzing heat transfer,particularly through thermal conduction,in a wall containing PCM.A novel approach was proposed,wherein the studied system(sensitive balance)interacts directly with a latent balance to realistically define the behavior of specific humidity and mass flow rates.In addition,a numerical model implemented in MATLAB software has been developed to investigate the effect of integrating PCM on the hygrothermal balances inside the building.The obtained results indicate a consistent response in internal temperatures,specific humidity,and mass flow rates,with temperature differences ranging from 5℃to 13℃and a maximum phase shift of 13 h.In addition,the findings provided valuable insights into optimizing the design and performance of multi-zone constructions,offering a sustainable pathway for enhancing building resilience and occupant well-being.

Measurement of the Level of Knowledge of the Sands Used in Constructions in Togo

Faced with the proliferation of quarries extracting silty sand and river sand used in the building and public works sector in Togo, recognition of the granular properties of these materials remains a major challenge for builders. This study aims to take stock of the use of sand in construction in Togo. One hundred and eighteen (118) sand quarries in operation, including thirty-eight (38) silty sand quarries and eighty (80) river sand quarries, were identified following surveys carried out among stakeholders involved in the chain of construction on 40% of the national territory. It appears from these surveys that river sands (59.43% to 84.68%) are prioritized over silty sands (15.32% to 40.57%). Three (3) main reasons are behind the choice of sand type;namely, proximity (28%), cleanliness (25%), good appearance (25%). These three (03) reasons partly explain the strong dependence of users on the sands located in their vicinity as well as the related expenses. Thus, making data available on the characteristics of sand, the materials most used in construction in Togo, would contribute to improving the housing conditions of the Togolese population. .

Ceramic Properties of Three Specimens of Alluvial Clays Used in Local Constructions from Mbouda Clay Deposit, West Cameroon

The Mbouda alluvial deposit is located at the foot of the Bamboutos mountains (West Cameroon) where three types of clayey materials are widespread. The populations collect these clays in their natural state in view of constructions using fired bricks or compressed blocks. Unfortunately, these buildings are not strong. This study investigates the causes of the strengthlessness of buildings and suggests solutions to overcome the difficulty. The research content includes field and laboratory studies. The methodology consists of sampling black (AN), white (AB) and red (AR) clays specimens identified in the study area and analysing them simultaneously at MIPROMALO (Cameroon) and at ACME LAB in Vancouver (Canada). The results obtained show a high sand content in the samples AN (64%), AB (55.2%), AR (30.9%). The compressive strength of the built specimens is low at 900˚C considered as the traditional firing temperature AN (0.94 MPa), AB (5.25 MPa), AR (2.18 MPa). The mineralogical series are identically made by kaolinite, chlorite, gibbsite, quartz, muscovite, biotite, goethite, magnetite and hematite. Silica (SiO2) presents higher contents AN (52.87%), AB (48.02%), AR (47.68%) followed by alumina (Al2O3) AN (29.96%), AB (28.13%), AR (24.72%). The other elements are poorly represented.

Research on the Construction of Intellectual Property System and Optimization of Business Environment in China

With the rapid development of globalization and information technology,intellectual property has been one of the key drivers of economic growth,and the construction of intellectual property system has become an important criterion for measuring the quality of business environment.This article is intended to explore the current status of intellectual property system construction in China,the challenges,and its relationship with the business environment,to propose the corresponding countermeasures and suggestions.The study finds that the legal system of intellectual property in China is gradually improving,and judicial and administrative protection are continuously strengthened.However,the challenges still remain such as frequent infringements,rights hard to protect and insufficient international cooperation.These issues not only affect the legitimate rights and interests of innovation entities,but also for the market fairness and the level of the business environment.Therefore,this article proposes that strengthening the perfection of the intellectual property legal system,enhancing intellectual property services and support capabilities,strengthening international cooperation and exchanges,and accelerating the cultivation of composite talents.It aims to provide theoretical references for the construction of intellectual property system and the optimization of the business environment,promote the high-quality development of economy and enhance the global competitiveness of the country.

On the Principal Constructions to Express the Future Time and Their Implications

According to the definition of tense,English has no actual future tense.The ways to express future time in English vary with the specific situation.We should avoid frequently using the same way to express the future.It is important to study the different construction of the future time in English and its implications in order to make it clear that the appropriate construction to cope with the specific situation should be noticed.

Chinese Liandong(Serial Verb) Constructions from the Perspective of Figure-Ground Relation

Empty categories,which lack phonological form and hence are not visible in the phonetic representation of the sentence,have both syntactic and semantic properties.Null subjects PRO and pro are base-generated empty categories.This thesis,based on Chomsky's theory about empty categories and research achievements made by Chinese scholars,attempts to analyze the liandong(Serial Verb) construction from Figure and Ground perspective.

TWO NEW CONSTRUCTIONS OF CARTESIAN AUTHENTICATION CODES FROM SYMPLECTIC GEOMETRY

In this paper, two new constructions of Cartesian authentication codes from symplectic geometry are presented and their size parameters are computed.

Constructions and Preliminary HV Conditioning of a Photocathode Direct-Current Electron Gun at IHEP

As one of the most important key technologies for future advanced light source based on the energy recovery linac, a photocathode dc electron gun is supported by Institute of High Energy Physics （IHEP） to address the technical challenges of producing very low ernittance beams at high average current. Construction of the dc gun is completed and a preliminary high voltage conditioning is carried out up to 440 k V. The design, construction and preliminary HV conditioning results for the dc gun are described.

THE ECOLOGICAL FEATURES AND ECOLOGICAL CONSTRUCTIONS OF A MIRE IN CHINA

A mire as an ecosystem, usually is considered as an aquatic ecosystem,or a terrestrial ecosystem. The author thinks that mire is a special ecosystem between these two ecosystems, and proposes the new concept that a mire is a natural ecosystem with transitional nature of semi-water and semi-land formed by water and land interaction. The paper discusses the nature of the mire ecosystem, the exploitation and utilization and ecological construction of a mire.

Properties and Characteristics of Regolith-Based Materials for Extraterrestrial Construction

The construction of extraterrestrial bases has become a new goal in the active exploration of deep space.Among the construction techniques,in situ resource-based construction is one of the most promising because of its good sustainability and acceptable economic cost,triggering the development of various types of extraterrestrial construction materials.A comprehensive survey and comparison of materials from the perspective of performance was conducted to provide suggestions for material selection and optimization.Thirteen types of typical construction materials are discussed in terms of their reliability and applicability in extreme extraterrestrial environment.Mechanical,thermal and optical,and radiation-shielding properties are considered.The influencing factors and optimization methods for these properties are analyzed.From the perspective of material properties,the existing challenges lie in the comprehensive,long-term,and real characterization of regolith-based construction materials.Correspondingly,the suggested future directions include the application of high-throughput characterization methods,accelerated durability tests,and conducting extraterrestrial experiments.

Traffic organization during urban road constructions

This research presented a bi-level programming approach to optimize the schedule of ur- ban road construction activities based on a hypothetical transport network, with an objective of mini- mizing the overall traffic delays. A heuristic algorithm was utilized to identify a set of road construction schedules, while PARAMICS was adopted to estimate the total travel time in the network under each road construction scenario. To test the performance of proposed heuristics-simulation methodology, a numerical test was implemented. The overall results suggested that the proposed methodol- ogy could quickly find the optimum solution with good convergence.

CONSTRUCTIONS OF THE GENERAL SOLUTION FOR A SYSTEM OF PARTIAL DIFFERENTIAL EQUATIONS WITH VARIABLE COEFFICIENTS

Solving partial differential equations Has not only theoretical significance, but also practical value. In this paper, by the property of conjugate operator, we give a method to construct the general solutions of a system of partial differential equations.

Process,Material,and Regulatory Considerations for 3D Printed Medical Devices and Tissue Constructs

Three-dimensional(3D)printing is a highly automated platform that facilitates material deposition in a layer-by-layer approach to fabricate pre-defined 3D complex structures on demand.It is a highly promising technique for the fabrication of personalized medical devices or even patient-specific tissue constructs.Each type of 3D printing technique has its unique advantages and limitations,and the selection of a suitable 3D printing technique is highly dependent on its intended application.In this review paper,we present and highlight some of the critical processes(printing parameters,build orientation,build location,and support structures),material(batch-to-batch consistency,recycling,protein adsorption,biocompatibility,and degradation properties),and regulatory considerations(sterility and mechanical properties)for 3D printing of personalized medical devices.The goal of this review paper is to provide the readers with a good understanding of the various key considerations(process,material,and regulatory)in 3D printing,which are critical for the fabrication of improved patient-specific 3D printed medical devices and tissue constructs.

Evaluation of Inverse Modeling Techniques for Pinpointing Water Leakages at Building Constructions

The location and nature of the moisture leakages are sometimes difficult to detect. Moreover, the relation between observed inside surface moisture patterns and where the moisture enters the construction is often not clear. The objective of this paper is to investigate inverse modeling techniques as a tool for the detection of moisture leakage locations in building constructions from inside surface moisture patterns. It is concluded that although the presented methodology is promising, more research is needed to confirm its usability.

Efficiency and effectiveness of systems for the treatment of domestic wastewater based on subsurface flow constructed wetlands in Jarabacoa, Dominican Republic

Constructed wetlands(CwW)are well known nature-based systems for water treatment.This study evaluated the efficiency and effectiveness of seven domestic wastewater treatment systems based on horizontal flow CWs in Jarabacoa,the Dominican Republic.The results showed that the CWs were efficient in reducing the degree of contamination of wastewater to levels below the Dominican wastewater discharge standards for parameters such as the 5-day biochemical oxygen demand(BOD5)and chemical oxygen demand,but not for the removal of phosphorus and fecal coliforms.In addition,a horizontal flow subsurface wetland in the peri-urban area El Dorado was evaluated in terms of the performance of wastewater treatment in tropical climatic conditions.The concentrations of heavy metals,such as zinc,copper,chromium,and iron,were found to decrease in the effluent of the wetland,and the concentrations for nickel and manganese tended to increase.The levels of heavy metals in the effluent were lower than the limit values of the Dominican wastewater discharge standards.The construction cost of these facilities was around 200 USD per population equivalent,similar to the cost in other countries in the same region.This study suggested some solutions to the improved performance of CWs:selection of a microbial flora that guarantees the reduction of nitrates and nitrites to molecular nitrogen,use of endemic plants that bioaccumulate heavy metals,combination of constructed wetlands with filtration on activated carbon,and inclusion of water purification processes that allow to evaluate the reuse of treated water.

Promoting grain production through high-standard farmland construction:Evidence in China

Food security is a strategic priority for a country’s economic development.In China,high-standard farmland construction(HSFC)is an important initiative to stabilize grain production and increase grain production capacity.Based on panel data from 31 sample provinces,autonomous regions,and municipalities in China from 2005–2017,this study explored the impact of HSFC on grain yield using the difference-in-differences(DID)method.The results showed that HSFC significantly increased total grain production,which is robust to various checks.HSFC increased grain yield through three potential mechanisms.First,it could increase the grain replanting index.Second,it could effectively reduce yield loss due to droughts and floods.Last,HSFC could strengthen the cultivated land by renovating the low-and medium-yielding fields.Heterogeneity analysis found that the HSFC farmland showed a significant increase in grain yield only in the main grain-producing areas and balanced areas.In addition,HSFC significantly increased the yields of rice,wheat,and maize while leading to a reduction in soybean yields.The findings suggest the government should continue to promote HSFC,improve construction standards,and strictly control the“non-agriculturalization”and“non-coordination”of farmland to increase grain production further.At the same time,market mechanisms should be used to incentivize soybean farming,improve returns and stabilize soybean yields.

Study on destructions and reinforcement measures of mined constructions

Ground movement and deformation caused by underground mining would destroy the constructions located within subsidence area. Constructions would suffer different destructions with different location. The effect of ground deformation caused by underground mining to constructions was analyzed. Analyzed the destructive types of constructions in different ground movement and deformation. Taking a two-storey building for example, the walls were reinforced by computation before mining. To protect the construction the reinforcement measures to the construction before mining were studied.

Some Explicit Constructions of Type-Ⅱ,Ⅲ,Ⅳ,Ⅴ QC-LDPC Codes with Girth 6

Multi-type quasi-cyclic(QC) low-density parity-check(LDPC) codes can be considered as multiple-edge protograph QC-LDPC codes having some advantages in the minimum Hamming distance bound over single-edge protograph codes or type-Ⅰ QC-LDPC codes when the base matrices have the same size. In this paper, we investigate a class of multi-type QC-LDPC codes whose parity-check matrices contain just one blockrow of circulants and we obtain the generator matrix of such codes in general form. Using the permutation arrays and defining injection arrays, we present a new approach to construct a class of high-rate type-Ⅰ QC-LDPC codes with girth 6 from the constructed 4-cycle free multi-type QC-LDPC codes. In continue, for 2 ≤ w≤6, some type-w QC-LDPC codes with girth 6 are constructed explicitly such that the constructed codes are flexible in terms of rate and length. To the best of our knowledge, for w = 5,6, this is the first paper which deals with the explicit construction of type-w QC-LDPC codes with girth 6 and high rates. Moreover, for w = 3, 4, the constructed type-w QC-LDPC codes have better(6,8)-cycle multiplicities than the codes with minimum achievable length recently constructed by cyclic difference families(CDFs). Simulation results show that the binary and non-binary constructed codes outperform the constituent underlying QC-LDPC codes.

A comprehensive review of lunar lava tube base construction and field research on a potential Earth test site

The Moon,as the closest celestial body to the Earth,plays a pivotal role in the progression of deep space exploration,and the establishment of research outposts on its surface represents a crucial step in this mission.Lunar lava tubes are special underground caves formed by volcanic eruptions and are considered as ideal natural shelters and scientific laboratories for lunar base construction.This paper begins with an in-depth overview of the geological origins,exploration history,and distribution locations of lunar lava tubes.Subsequently,it delves into the presentation of four distinctive advantages and typical concepts for constructing bases within lava tubes,summarizing the ground-based attempts made thus far in lunar lava tube base construction.Field studies conducted on a lava tube in Hainan revealed rock compositions similar to those found during the Apollo missions and clear lava tube structures,making it a promising analog site.Lastly,the challenges and opportunities encountered in the field of geotechnical engineering regarding the establishment of lunar lava tube bases are discussed,encompassing cave exploration technologies,in-situ testing methods,geomechanical properties under lunar extreme environments,base design and structural stability assessment,excavation and reinforcement techniques,and simulated Earth-based lava tube base.

基于Construct 3的射击类游戏设计与开发——以飞机大战为例

Construct 3作为小而精的H5跨平台游戏引擎,强大的交互性和用户友好性使其在2D游戏开发方面独具优势。借助Construct 3重构经典射击类游戏“飞机大战”,通过Event Sheet实现游戏中背景循环滚动、动画导入、角色创建与随机运动、游戏难度控制、游戏变量控制等主要功能。经过测试,游戏可打包发布成Web、移动设备和PC端.exe格式,游戏交互、特效运行流畅,游戏变量与难度控制处于合理范围。