The essential task of integrated electricity-heat systems(IEHSs)is to provide customers with reliable electric and heating services.From the perspective of customers,it is reasonable to analyze the reliabilities of IE...The essential task of integrated electricity-heat systems(IEHSs)is to provide customers with reliable electric and heating services.From the perspective of customers,it is reasonable to analyze the reliabilities of IEHSs based on the ability to provide energy services with a reasonable assurance of continuity and quality,which are termed as service-based reliabilities.Due to the thermal inertia existing in IEHSs,the heating service performances can present slow dynamic characteristics,which has a great impact on the service satisfaction of customers.The neglect of such thermal dynamics will bring about inaccurate service-based reliability measurement,which can lead to the inefficient dispatch decisions of system operators.Therefore,it is necessary to provide a tool which can analyze the servicebased reliabilities of IEHSs considering the impacts of thermal dynamics.This paper firstly models the energy service performance of IEHSs in contingency states.Specifically,the nodal energy supplies are obtained from the optimal power and heat flow model under both variable hydraulic and thermal conditions,in which the transmission-side thermal dynamics are formulated.On this basis,the energy service performances for customers are further determined with the formulation of demandside thermal dynamics.Moreover,a service-based reliability analysis framework for the IEHSs is proposed utilizing the timesequential Monte Carlo simulation(TSMCS)technique with the embedded decomposition algorithm.Furthermore,the indices for quantifying service-based reliabilities are defined based on the traditional reliability indices,where dynamic service performances and service satisfactions of customers are both considered.Numerical simulations are carried out with a test system to validate the effectiveness of the proposed framework.展开更多
In the past several decades,the trend of rainfall have been significantly increasing in the Qinghai–Tibet Plateau,which inevitably leads to a change in the surface energy balance processes and thermal-moisture status...In the past several decades,the trend of rainfall have been significantly increasing in the Qinghai–Tibet Plateau,which inevitably leads to a change in the surface energy balance processes and thermal-moisture status of the permafrost active layers.However,the influence of mechanisms and associated effects of increasing rainfall on active layers are still poorly understood.Therefore,in this study,a validated coupled numerical water–vapor–heat model was applied for simulating the surface energy components,liquid and vapor water migration,and energy transfer within the permafrost active layer under the action of increasing rainfallin the case of an especially wet year.The obtained results demonstrate that the surface heat flux decreaseswith the increase in rainfall,and the dominant form of energy exchange between the ground and atmospherebecomes the latent heatflux,which is beneficial for the preservation of permafrost.The increasing rainfall will also cause the migration of liquid and vapor water,and the migration of liquid will be more significant.The liquid and vapor water migrationcaused by the increasing rainfallis also accompanied by energy transfer.With the increase in rainfall,the decrease in total soil heat flux directly leads to a cooling effect on the soil,and then the upper limit of the frozen soil rises,which alleviates the degradation of permafrost.These results provide further insights into engineering structures,regional ecological climate change,hydrology,and environmental issues in permafrost regions.展开更多
The heat conduction and thermal conductivity for methane hydrate are simulated from equilibrium molecular dynamics. The thermal conductivity and temperature dependence trend agree well with the experimental results. T...The heat conduction and thermal conductivity for methane hydrate are simulated from equilibrium molecular dynamics. The thermal conductivity and temperature dependence trend agree well with the experimental results. The nonmonotonic temperature dependence is attributed to the phonon inelastic scattering at higher temperature and to the confinement of the optic phonon modes and low frequency phonons at low temperature. The thermal conductivity scales proportionally with the van der Waals interaction strength, The conversion of a crystal-like nature into an amorphous one oecurs at higher strength. Both the temperature dependence and interaction strength dependence are explained by phonon inelastic scattering.展开更多
Using molecular dynamics (MD) simulation, we study the thermal shock behavior of tungsten (W), which has been used for the plasma facing material (PFM) of tokamaks. The thermo-elastic stress wave, corresponding ...Using molecular dynamics (MD) simulation, we study the thermal shock behavior of tungsten (W), which has been used for the plasma facing material (PFM) of tokamaks. The thermo-elastic stress wave, corresponding to the collective displacement of atoms, is analyzed with the Lagrangian atomic stress method, of which the reliability is also analyzed. The stress wave velocity corresponds to the speed of sound in the material, which is not dependent on the thermal shock energy. The peak pressure of a normal stress wave increases with the increase of thermal shock energy. We analyze the temperature evolution of the thermal shock region according to the Fourier transformation. It can be seen that the “obvious” velocity of heat propagation is less than the velocity of the stress wave; further, that the thermo-elastic stress wave may contribute little to the transport of kinetic energy. The heat propagation can be described properly by the heat conduction equation. These results may be useful for understanding the process of the thermal shock of tungsten.展开更多
Silicene, a silicon analogue of graphene, has attracted increasing research attention in recent years because of its unique electrical and thermal conductivities. In this study, phonon thermal conductivity and its iso...Silicene, a silicon analogue of graphene, has attracted increasing research attention in recent years because of its unique electrical and thermal conductivities. In this study, phonon thermal conductivity and its isotopic doping effect in silicene nanoribbons(SNRs) are investigated by using molecular dynamics simulations. The calculated thermal conductivities are approximately 32 W/mK and 35 W/mK for armchair-edged SNRs and zigzag-edged SNRs, respectively, which show anisotropic behaviors. Isotope doping induces mass disorder in the lattice, which results in increased phonon scattering, thus reducing the thermal conductivity. The phonon thermal conductivity of isotopic doped SNR is dependent on the concentration and arrangement pattern of dopants. A maximum reduction of about 15% is obtained at 50% randomly isotopic doping with ^(30)Si. In addition, ordered doping(i.e., isotope superlattice) leads to a much larger reduction in thermal conductivity than random doping for the same doping concentration. Particularly, the periodicity of the doping superlattice structure has a significant influence on the thermal conductivity of SNR. Phonon spectrum analysis is also used to qualitatively explain the mechanism of thermal conductivity change induced by isotopic doping. This study highlights the importance of isotopic doping in tuning the thermal properties of silicene, thus guiding defect engineering of the thermal properties of two-dimensional silicon materials.展开更多
With the increasing oil demand, the construction of oil energy reserves in China needs to be further strengthened. However, given that there has been no research on the main influencing factors of crude oil temperatur...With the increasing oil demand, the construction of oil energy reserves in China needs to be further strengthened. However, given that there has been no research on the main influencing factors of crude oil temperature drop in storage tanks under actual dynamically changing environments, this paper considers the influence of dynamic thermal environment and internal crude oil physical properties on the fluctuating changes in crude oil temperature. A theoretical model of the unsteady-state temperature drop heat transfer process is developed from a three-dimensional perspective. According to the temperature drop variation law of crude oil storage tank under the coupling effect of various heat transfer modes such as external forced convection, thermal radiation, and internal natural convection, the external dynamic thermal environment influence zone, the internal crude oil physical property influence zone, and the intermediate transition zone of the tank are proposed. And the multiple non-linear regression method is used to quantitatively characterize the influence of external ambient temperature, solar radiation, wind speed, internal crude oil density, viscosity, and specific heat capacity on the temperature drop of crude oil in each influencing zone. The results of this paper not only quantitatively explain the main influencing factors of the oil temperature drop in the top, wall, and bottom regions of the tank, but also provide a theoretical reference for oil security reserves under a dynamic thermal environment.展开更多
Hydroelectric facilities impact water temperature; low velocities in a reservoir increase residence time and enhance heat exchange in surface layers. In this study, an unsteady three-dimensional model was developed to...Hydroelectric facilities impact water temperature; low velocities in a reservoir increase residence time and enhance heat exchange in surface layers. In this study, an unsteady three-dimensional model was developed to predict the temperatm'e dynamics in the McNary Dam forebay. The model is based on the open-source code OpenFOAM. RANS equations with the Boussinesq approximation were used to solve the flow field. A: realizable k-ε model that accounts for the production of wind turbulence was developed. Solar radiation and convective heat transfer at the free surface were included. The result of the model was compared with the field data collected on August 18, 2004. Changes in diurnal stratification were adequately predicted by the model. Observed vertical and lateral temperature distributions were accurately captured. Results indicate that the model can be used as a numerical tool to assess structural and operational alternatives to reduce the forebay temperature.展开更多
An analytical method is developed to determine the transient response of dynamic thermostress in a two-layered cylinder with initial interface pressure. At first, the initial interface pressure in a two-layered cylind...An analytical method is developed to determine the transient response of dynamic thermostress in a two-layered cylinder with initial interface pressure. At first, the initial interface pressure in a two-layered cylinder caused by a heat-assembling method is considered as the initial condition of a thermal elastodynamic equilibrium equation. Thus, a thermal elastodynamic solution for a separate hollow cylinder with the initial stress field is found out by means of a series of simply mathematical transform. By making use of the boundary conditions and continuity conditions of a layered cylinders, the solution for the thermal shock exerting an influence on the initial interface pressure in a two-layered cylinder is also discussed.展开更多
Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene (CLPS) as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysila...Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene (CLPS) as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysilane (VTES), vinyl trimethoxysilane (VTMS) and γ-methacryloylpropyl trimethoxysilane (MPS). The treated glass fibers were analyzed by fourier transform infrared spectroscopy (FTIR). Dynamic mechanical thermal analysis (DMTA) and thermo-gravimetric analysis (TGA) were employed to investigate the effect of glass fibers surface modification on viscoelastic behavior and thermal properties. The morphology of fracture surfaces of various composites was observed by scanning electron microscopy (SEM). The results revealed that these coupling agents were connected to the surfaces of the fibers by chemical bonding. Dynamic mechanical properties as well as thermal stability of the composites were improved considerablely, but to varying degrees depending on the fiber modification. The diversities of improvement of properties were attributed to the different interfacial adhesion between CLPS matrix and the glass fibers.展开更多
In this paper, thermoelastic problem of onedimensional copper rod under thermal shock is simulated using molecular dynamics method by adopting embedded atom method potential. The rod is on axis x, the left outermost s...In this paper, thermoelastic problem of onedimensional copper rod under thermal shock is simulated using molecular dynamics method by adopting embedded atom method potential. The rod is on axis x, the left outermost surface of which is traction free and the right outermost surface is fixed. Free boundary condition is imposed on the outermost surfaces in direction y and z. The left and right ends of the rod are subjected to hot and cold baths, respectively. Temperature, displacement and stress distributions are obtained along the rod at different moments, which are shown to be limited in the mobile region, indicating that the heat propagation speed is limited rather than infinite. This is consistent with the prediction given by generalized thermoelastic theory. From simulation results we find that the speed of heat conduction is the same as the speed of thermal stress wave. In the present paper, the simulations are conducted using the large-scale atomic/molecular massively parallel simulator and completed visualization software.展开更多
he temperature distnbution on the surface of a flight vehicle and the va-riation of the modulus of elasticity with respect to temperature are considered. The minimum weight structural design with constraints on freque...he temperature distnbution on the surface of a flight vehicle and the va-riation of the modulus of elasticity with respect to temperature are considered. The minimum weight structural design with constraints on frequency, on the coordinates ofmodal nodes and on the upper and lower bounds of the design vanables are studied us-ing Kuhn-Tucker conditions as optimal cntenon. The vanation of the flrst three ordernatural frequencies, modal shapes and minimum structural weight vs temperature gra-dient are discussed. It is pointed out that it is imperative to take into account the effectof aerodynamic heating on structural dynamic optimization. Calculation example showsthat the method obtained is feasible and efficient.展开更多
This research focused on the dynamic mechanical and thermal properties of woven mat jute/kenaf/jute(J/K/J)and kenaf/jute/kenaf(K/J/K)hybrid composites.Dynamic mechanical analysis(DMA)and Thermo-gravimetric Analysis(TG...This research focused on the dynamic mechanical and thermal properties of woven mat jute/kenaf/jute(J/K/J)and kenaf/jute/kenaf(K/J/K)hybrid composites.Dynamic mechanical analysis(DMA)and Thermo-gravimetric Analysis(TGA)were used to study the effect of layering sequence on the thermal properties of kenaf/jute hybrid composites.The DMA results;it was found that the differences in the stacking sequence between the kenaf/jute composites do not affect their storage modulus,loss modulus and damping factor.From the TGA and DMA results,it has been shown that stacking sequence has given positive effect to the kenaf/jute hybrid composite compared to pure epoxy composite.This is because kenaf and jute fibre has increased the Tg values of the composites,thus affect the thermal degradation.Results showed that the storage modulus for kenaf/jute hybrid composites increased compared with pure epoxy composites with increasing temperature and the values of remained almost the same at glass transition temperature(Tg),the hybrid composite perhaps due to the improved fibre/matrix interface bonding.The preliminary analysis could provide a new direction for the creation of a novel hybrid composite which offers unique properties which cannot be accomplished in a single material system.展开更多
A formula is derived for determining the influence of temperature and loading rate on dynamic fracture toughness of a high strength low alloy steel (HQ785C) from thermal activation analysis of the experimental results...A formula is derived for determining the influence of temperature and loading rate on dynamic fracture toughness of a high strength low alloy steel (HQ785C) from thermal activation analysis of the experimental results of three-point bend specimens as well as introducing an Arrhenius formula. It is shown that the results obtained by the given formula are in good agreement with the experimental ones in the thermal activation region. The present method is also valuable to describe the relationship between dynamic fracture toughness and temperature and loading rate of other high strength low alloy steels.展开更多
We improved the thermal equivalent-circuit model of the laser diode module(LDM) to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal p...We improved the thermal equivalent-circuit model of the laser diode module(LDM) to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal parameters and the transient junction temperature of the LDM are modeled and obtained according to the temperature of the thermistor integrated in the module.Our improved thermal model is verified indirectly by monitoring the emission wavelength of the laser diode against gas absorption lines,and several thermal parameters are obtained with the temperature uncertainty of 0.01 K in the thermal dynamic process.展开更多
Increasing the life span and efficiency of Multiprocessor System on Chip(MPSoC)by reducing power and energy utilization has become a critical chip design challenge for multiprocessor systems.With the advancement of te...Increasing the life span and efficiency of Multiprocessor System on Chip(MPSoC)by reducing power and energy utilization has become a critical chip design challenge for multiprocessor systems.With the advancement of technology,the performance management of central processing unit(CPU)is changing.Power densities and thermal effects are quickly increasing in multi-core embedded technologies due to shrinking of chip size.When energy consumption reaches a threshold that creates a delay in complementary metal oxide semiconductor(CMOS)circuits and reduces the speed by 10%–15%because excessive on-chip temperature shortens the chip’s life cycle.In this paper,we address the scheduling&energy utilization problem by introducing and evaluating an optimal energy-aware earliest deadline first scheduling(EA-EDF)based technique formultiprocessor environments with task migration that enhances the performance and efficiency in multiprocessor systemon-chip while lowering energy and power consumption.The selection of core andmigration of tasks prevents the system from reaching itsmaximumenergy utilization while effectively using the dynamic power management(DPM)policy.Increase in the execution of tasks the temperature and utilization factor(u_(i))on-chip increases that dissipate more power.The proposed approach migrates such tasks to the core that produces less heat and consumes less power by distributing the load on other cores to lower the temperature and optimizes the duration of idle and sleep times across multiple CPUs.The performance of the EA-EDF algorithm was evaluated by an extensive set of experiments,where excellent results were reported when compared to other current techniques,the efficacy of the proposed methodology reduces the power and energy consumption by 4.3%–4.7%on a utilization of 6%,36%&46%at 520&624 MHz operating frequency when particularly in comparison to other energy-aware methods for MPSoCs.Tasks are running and accurately scheduled to make an energy-efficient processor by controlling and managing the thermal effects on-chip and optimizing the energy consumption of MPSoCs.展开更多
Minimizing the energy consumption to increase the life span and performance of multiprocessor system on chip(MPSoC)has become an integral chip design issue for multiprocessor systems.The performance measurement of com...Minimizing the energy consumption to increase the life span and performance of multiprocessor system on chip(MPSoC)has become an integral chip design issue for multiprocessor systems.The performance measurement of computational systems is changing with the advancement in technology.Due to shrinking and smaller chip size power densities onchip are increasing rapidly that increasing chip temperature in multi-core embedded technologies.The operating speed of the device decreases when power consumption reaches a threshold that causes a delay in complementary metal oxide semiconductor(CMOS)circuits because high on-chip temperature adversely affects the life span of the chip.In this paper an energy-aware dynamic power management technique based on energy aware earliest deadline first(EA-EDF)scheduling is proposed for improving the performance and reliability by reducing energy and power consumption in the system on chip(SOC).Dynamic power management(DPM)enables MPSOC to reduce power and energy consumption by adopting a suitable core configuration for task migration.Task migration avoids peak temperature values in the multicore system.High utilization factor(ui)on central processing unit(CPU)core consumes more energy and increases the temperature on-chip.Our technique switches the core bymigrating such task to a core that has less temperature and is in a low power state.The proposed EA-EDF scheduling technique migrates load on different cores to attain stability in temperature among multiple cores of the CPU and optimized the duration of the idle and sleep periods to enable the low-temperature core.The effectiveness of the EA-EDF approach reduces the utilization and energy consumption compared to other existing methods and works.The simulation results show the improvement in performance by optimizing 4.8%on u_(i) 9%,16%,23%and 25%at 520 MHz operating frequency as compared to other energy-aware techniques for MPSoCs when the least number of tasks is in running state and can schedule more tasks to make an energy-efficient processor by controlling and managing the energy consumption of MPSoC.展开更多
The district heating system(DHS)consumes a lot of energy in winter,and its control accuracy needs to be improved urgently.To apply advanced process control(APC)in DHS,the thermal dynamic model of the existing building...The district heating system(DHS)consumes a lot of energy in winter,and its control accuracy needs to be improved urgently.To apply advanced process control(APC)in DHS,the thermal dynamic model of the existing buildings is essential.This paper uses the subspace method which is a data-driven approach for modelling the thermal dynamics of the building.The model’s performance is analyzed using the collected data,and the differences compared to the classical methods are also analyzed.The method reduces the RMSE by about 20%compared with the ARX model for the same complexity.Subsequently,the analysis of the training residuals indicates that the estimate of periodic intra-building disturbance can be obtained by minimizing the training residuals.By introducing the estimated disturbance function,the RMSE on the test set is further reduced by 26%.At the end of the article,a simple parameter extrapolation experiment is conducted,and the result shows that the parameters can be extrapolated to other buildings without large errors.展开更多
We investigated the temperature dependency of the dynamic mechanical properties of cement asphalt paste by the dynamic mechanical thermal analysis(DMTA) method. The experimental results show that the dynamic mechani...We investigated the temperature dependency of the dynamic mechanical properties of cement asphalt paste by the dynamic mechanical thermal analysis(DMTA) method. The experimental results show that the dynamic mechanical properties of cement asphalt pastes are sensitive to temperature due to the inclusion of asphalt, and may go through different states within a temperature range of-40 ℃ to 60 ℃, which is different from that of pure cement and asphalt. As the temperature of the cement asphalt paste increases, a considerable change of dynamic mechanical properties, including storage modulus(E'), loss modulus(E'') and loss factor(tand) is observed. Moreover, the influence of asphalt to cement(A/C) ratio on the temperature sensitivity of the dynamic mechanical properties of cement asphalt composites was investigated. The temperature dependency of cement asphalt composites is ascribed to the temperature dependency of the asphalt and its interaction with cement paste. A simple fractional model is proposed to describe the viscoelastic behavior of cement asphalt composites.展开更多
This study was based on the CEOP/CAMP-Tibet observed data at AWS (Automatic Weather Station) of MS3478 in the seasonal frozen soil region of northern Tibetan Plateau from March 2007 to February 2008. The variation c...This study was based on the CEOP/CAMP-Tibet observed data at AWS (Automatic Weather Station) of MS3478 in the seasonal frozen soil region of northern Tibetan Plateau from March 2007 to February 2008. The variation characteristics of PE (potential evapotransph'ation) were analyzed based on the Penman-Monteith method recommended by FAO (the Food and Agriculture Organization of the United Na- lions). The contributions of dynamic, thermal and water factors to PE were discussed, and the wet-dry condition of the plateau region was further studied. The results indicated that daily PE was between 0.52 mm and 6.46 mm for the whole year. Monthly PE was over 107 mm from May to September, but decreased to less than 41 mm from November to February. Annual PE was 1,037.8mm. In the summer, thermal PE was significantly more than dynamic PE, but conversely in the winter. Annual variation of thermal PE was of sine wave pattern. In addition, drought and semi-drought climate lasted for a long time while semi-humid climate was short. The effect of water and dynamic factors on PE varied considerably with the seasons. Annual variation of thermal PE was of sine wave pattern.展开更多
The lattice thermal conductivity of boron nitride nanoribbon(BNNR) is calculated by using equilibrium molecular dynamics(EMD) simulation method. The Green–Kubo relation derived from linear response theory is used...The lattice thermal conductivity of boron nitride nanoribbon(BNNR) is calculated by using equilibrium molecular dynamics(EMD) simulation method. The Green–Kubo relation derived from linear response theory is used to acquire the thermal conductivity from heat current auto-correlation function(HCACF). HCACF of the selected BNNR system shows a tendency of a very fast decay and then be followed by a very slow decay process,finally,approaching zero approximately within 3 ps. The convergence of lattice thermal conductivity demonstrates that the thermal conductivity of BNNR can be simulated by EMD simulation using several thousands of atoms with periodic boundary conditions. The results show that BNNR exhibit lower thermal conductivity than that of boron nitride(BN) monolayer,which indicates that phonons boundary scatting significantly suppresses the phonons transport in BNNR. Vacancies in BNNR greatly affect the lattice thermal conductivity,in detail,only 1% concentration of vacancies in BNNR induce a 60% reduction of the lattice thermal conductivity at room temperature.展开更多
基金supported by the Science and Technology Project of State Grid Corporation of China(No.5108-202218280A-2-448-XG)。
文摘The essential task of integrated electricity-heat systems(IEHSs)is to provide customers with reliable electric and heating services.From the perspective of customers,it is reasonable to analyze the reliabilities of IEHSs based on the ability to provide energy services with a reasonable assurance of continuity and quality,which are termed as service-based reliabilities.Due to the thermal inertia existing in IEHSs,the heating service performances can present slow dynamic characteristics,which has a great impact on the service satisfaction of customers.The neglect of such thermal dynamics will bring about inaccurate service-based reliability measurement,which can lead to the inefficient dispatch decisions of system operators.Therefore,it is necessary to provide a tool which can analyze the servicebased reliabilities of IEHSs considering the impacts of thermal dynamics.This paper firstly models the energy service performance of IEHSs in contingency states.Specifically,the nodal energy supplies are obtained from the optimal power and heat flow model under both variable hydraulic and thermal conditions,in which the transmission-side thermal dynamics are formulated.On this basis,the energy service performances for customers are further determined with the formulation of demandside thermal dynamics.Moreover,a service-based reliability analysis framework for the IEHSs is proposed utilizing the timesequential Monte Carlo simulation(TSMCS)technique with the embedded decomposition algorithm.Furthermore,the indices for quantifying service-based reliabilities are defined based on the traditional reliability indices,where dynamic service performances and service satisfactions of customers are both considered.Numerical simulations are carried out with a test system to validate the effectiveness of the proposed framework.
基金This study was supported by the Natural Science Foundation of China(No.41801033,No.41961010)Young doctor Foundation of Education Department of Gansu Province(2021QB-039)+3 种基金open fund of the State Key Laboratory of Frozen Soil Engineering(SKLFSE201804)Hongliu Support Funds for Excellent Youth Talents of Lanzhou University of Technology(Dr.ZHANG Mingli)Industrial support program of higher education of Gansu province(2020C-40)Basic Research Innovation Group of Gansu province(20JR5RA478).
文摘In the past several decades,the trend of rainfall have been significantly increasing in the Qinghai–Tibet Plateau,which inevitably leads to a change in the surface energy balance processes and thermal-moisture status of the permafrost active layers.However,the influence of mechanisms and associated effects of increasing rainfall on active layers are still poorly understood.Therefore,in this study,a validated coupled numerical water–vapor–heat model was applied for simulating the surface energy components,liquid and vapor water migration,and energy transfer within the permafrost active layer under the action of increasing rainfallin the case of an especially wet year.The obtained results demonstrate that the surface heat flux decreaseswith the increase in rainfall,and the dominant form of energy exchange between the ground and atmospherebecomes the latent heatflux,which is beneficial for the preservation of permafrost.The increasing rainfall will also cause the migration of liquid and vapor water,and the migration of liquid will be more significant.The liquid and vapor water migrationcaused by the increasing rainfallis also accompanied by energy transfer.With the increase in rainfall,the decrease in total soil heat flux directly leads to a cooling effect on the soil,and then the upper limit of the frozen soil rises,which alleviates the degradation of permafrost.These results provide further insights into engineering structures,regional ecological climate change,hydrology,and environmental issues in permafrost regions.
基金Supported by the National Natural Science Foundation of China under Grant Nos U1262112 and 51176205
文摘The heat conduction and thermal conductivity for methane hydrate are simulated from equilibrium molecular dynamics. The thermal conductivity and temperature dependence trend agree well with the experimental results. The nonmonotonic temperature dependence is attributed to the phonon inelastic scattering at higher temperature and to the confinement of the optic phonon modes and low frequency phonons at low temperature. The thermal conductivity scales proportionally with the van der Waals interaction strength, The conversion of a crystal-like nature into an amorphous one oecurs at higher strength. Both the temperature dependence and interaction strength dependence are explained by phonon inelastic scattering.
基金Project supported by the National Magnetic Confinement Fusion Science Program of China(Grant No.2013GB109004)the National Natural Science Foundation of China(Grant Nos.51071095 and 50971077)
文摘Using molecular dynamics (MD) simulation, we study the thermal shock behavior of tungsten (W), which has been used for the plasma facing material (PFM) of tokamaks. The thermo-elastic stress wave, corresponding to the collective displacement of atoms, is analyzed with the Lagrangian atomic stress method, of which the reliability is also analyzed. The stress wave velocity corresponds to the speed of sound in the material, which is not dependent on the thermal shock energy. The peak pressure of a normal stress wave increases with the increase of thermal shock energy. We analyze the temperature evolution of the thermal shock region according to the Fourier transformation. It can be seen that the “obvious” velocity of heat propagation is less than the velocity of the stress wave; further, that the thermo-elastic stress wave may contribute little to the transport of kinetic energy. The heat propagation can be described properly by the heat conduction equation. These results may be useful for understanding the process of the thermal shock of tungsten.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11504418 and 11447033)the Natural Science Fund for Colleges and Universities in Jiangsu Province,China(Grant No.16KJB460022)the Fundamental Research Funds for the Central Universities of CUMT,China(Grant No.2015XKMS075)
文摘Silicene, a silicon analogue of graphene, has attracted increasing research attention in recent years because of its unique electrical and thermal conductivities. In this study, phonon thermal conductivity and its isotopic doping effect in silicene nanoribbons(SNRs) are investigated by using molecular dynamics simulations. The calculated thermal conductivities are approximately 32 W/mK and 35 W/mK for armchair-edged SNRs and zigzag-edged SNRs, respectively, which show anisotropic behaviors. Isotope doping induces mass disorder in the lattice, which results in increased phonon scattering, thus reducing the thermal conductivity. The phonon thermal conductivity of isotopic doped SNR is dependent on the concentration and arrangement pattern of dopants. A maximum reduction of about 15% is obtained at 50% randomly isotopic doping with ^(30)Si. In addition, ordered doping(i.e., isotope superlattice) leads to a much larger reduction in thermal conductivity than random doping for the same doping concentration. Particularly, the periodicity of the doping superlattice structure has a significant influence on the thermal conductivity of SNR. Phonon spectrum analysis is also used to qualitatively explain the mechanism of thermal conductivity change induced by isotopic doping. This study highlights the importance of isotopic doping in tuning the thermal properties of silicene, thus guiding defect engineering of the thermal properties of two-dimensional silicon materials.
基金supported by the National Natural Science Foundation of China(52104064)(52074089)the China Postdoctoral Science Foundation(2020M681074)+3 种基金Heilongjiang Provincial Natural Science Foundation of China(YQ2023E006)University Nursing Program for Young Scholars with Creative Talents in Heilongjiang Province(UNPYSCT-2020152)Postdoctoral Science Foundation of Heilongjiang Province in China(LBH-TZ2106)(LBH-Z20122)Northeast Petroleum University Talents Introduction Fund(2019KQ18).
文摘With the increasing oil demand, the construction of oil energy reserves in China needs to be further strengthened. However, given that there has been no research on the main influencing factors of crude oil temperature drop in storage tanks under actual dynamically changing environments, this paper considers the influence of dynamic thermal environment and internal crude oil physical properties on the fluctuating changes in crude oil temperature. A theoretical model of the unsteady-state temperature drop heat transfer process is developed from a three-dimensional perspective. According to the temperature drop variation law of crude oil storage tank under the coupling effect of various heat transfer modes such as external forced convection, thermal radiation, and internal natural convection, the external dynamic thermal environment influence zone, the internal crude oil physical property influence zone, and the intermediate transition zone of the tank are proposed. And the multiple non-linear regression method is used to quantitatively characterize the influence of external ambient temperature, solar radiation, wind speed, internal crude oil density, viscosity, and specific heat capacity on the temperature drop of crude oil in each influencing zone. The results of this paper not only quantitatively explain the main influencing factors of the oil temperature drop in the top, wall, and bottom regions of the tank, but also provide a theoretical reference for oil security reserves under a dynamic thermal environment.
基金supported by Hydro Research Foundation (Grant No. DE-EE0002668)
文摘Hydroelectric facilities impact water temperature; low velocities in a reservoir increase residence time and enhance heat exchange in surface layers. In this study, an unsteady three-dimensional model was developed to predict the temperatm'e dynamics in the McNary Dam forebay. The model is based on the open-source code OpenFOAM. RANS equations with the Boussinesq approximation were used to solve the flow field. A: realizable k-ε model that accounts for the production of wind turbulence was developed. Solar radiation and convective heat transfer at the free surface were included. The result of the model was compared with the field data collected on August 18, 2004. Changes in diurnal stratification were adequately predicted by the model. Observed vertical and lateral temperature distributions were accurately captured. Results indicate that the model can be used as a numerical tool to assess structural and operational alternatives to reduce the forebay temperature.
文摘An analytical method is developed to determine the transient response of dynamic thermostress in a two-layered cylinder with initial interface pressure. At first, the initial interface pressure in a two-layered cylinder caused by a heat-assembling method is considered as the initial condition of a thermal elastodynamic equilibrium equation. Thus, a thermal elastodynamic solution for a separate hollow cylinder with the initial stress field is found out by means of a series of simply mathematical transform. By making use of the boundary conditions and continuity conditions of a layered cylinders, the solution for the thermal shock exerting an influence on the initial interface pressure in a two-layered cylinder is also discussed.
基金Supported by National Natural Science Foundation of China (No.50872101,A3 Foresight Program-50821140308)National Basic Research Program of China (No.2009CB939704)a joint project of National Nature Science Foundation of China and Russian Foundation for Basic Research(No.NSFC-RFBR 51011120252)
文摘Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene (CLPS) as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysilane (VTES), vinyl trimethoxysilane (VTMS) and γ-methacryloylpropyl trimethoxysilane (MPS). The treated glass fibers were analyzed by fourier transform infrared spectroscopy (FTIR). Dynamic mechanical thermal analysis (DMTA) and thermo-gravimetric analysis (TGA) were employed to investigate the effect of glass fibers surface modification on viscoelastic behavior and thermal properties. The morphology of fracture surfaces of various composites was observed by scanning electron microscopy (SEM). The results revealed that these coupling agents were connected to the surfaces of the fibers by chemical bonding. Dynamic mechanical properties as well as thermal stability of the composites were improved considerablely, but to varying degrees depending on the fiber modification. The diversities of improvement of properties were attributed to the different interfacial adhesion between CLPS matrix and the glass fibers.
基金supported by the National Natural Science Foundation of China (10872158)
文摘In this paper, thermoelastic problem of onedimensional copper rod under thermal shock is simulated using molecular dynamics method by adopting embedded atom method potential. The rod is on axis x, the left outermost surface of which is traction free and the right outermost surface is fixed. Free boundary condition is imposed on the outermost surfaces in direction y and z. The left and right ends of the rod are subjected to hot and cold baths, respectively. Temperature, displacement and stress distributions are obtained along the rod at different moments, which are shown to be limited in the mobile region, indicating that the heat propagation speed is limited rather than infinite. This is consistent with the prediction given by generalized thermoelastic theory. From simulation results we find that the speed of heat conduction is the same as the speed of thermal stress wave. In the present paper, the simulations are conducted using the large-scale atomic/molecular massively parallel simulator and completed visualization software.
文摘he temperature distnbution on the surface of a flight vehicle and the va-riation of the modulus of elasticity with respect to temperature are considered. The minimum weight structural design with constraints on frequency, on the coordinates ofmodal nodes and on the upper and lower bounds of the design vanables are studied us-ing Kuhn-Tucker conditions as optimal cntenon. The vanation of the flrst three ordernatural frequencies, modal shapes and minimum structural weight vs temperature gra-dient are discussed. It is pointed out that it is imperative to take into account the effectof aerodynamic heating on structural dynamic optimization. Calculation example showsthat the method obtained is feasible and efficient.
基金This work is supported by UPM under GP-IPS Grant 9486400.
文摘This research focused on the dynamic mechanical and thermal properties of woven mat jute/kenaf/jute(J/K/J)and kenaf/jute/kenaf(K/J/K)hybrid composites.Dynamic mechanical analysis(DMA)and Thermo-gravimetric Analysis(TGA)were used to study the effect of layering sequence on the thermal properties of kenaf/jute hybrid composites.The DMA results;it was found that the differences in the stacking sequence between the kenaf/jute composites do not affect their storage modulus,loss modulus and damping factor.From the TGA and DMA results,it has been shown that stacking sequence has given positive effect to the kenaf/jute hybrid composite compared to pure epoxy composite.This is because kenaf and jute fibre has increased the Tg values of the composites,thus affect the thermal degradation.Results showed that the storage modulus for kenaf/jute hybrid composites increased compared with pure epoxy composites with increasing temperature and the values of remained almost the same at glass transition temperature(Tg),the hybrid composite perhaps due to the improved fibre/matrix interface bonding.The preliminary analysis could provide a new direction for the creation of a novel hybrid composite which offers unique properties which cannot be accomplished in a single material system.
文摘A formula is derived for determining the influence of temperature and loading rate on dynamic fracture toughness of a high strength low alloy steel (HQ785C) from thermal activation analysis of the experimental results of three-point bend specimens as well as introducing an Arrhenius formula. It is shown that the results obtained by the given formula are in good agreement with the experimental ones in the thermal activation region. The present method is also valuable to describe the relationship between dynamic fracture toughness and temperature and loading rate of other high strength low alloy steels.
基金Project supported by the Key Program of the National Natural Science Foundation of China (Grant No. 60938002)the Special-funded Program on National Key Scientific Instruments and Equipment Development of China (Grant No. 2012YQ06016501)the Tianjin Research Program of Application Foundation and Advanced Technology,China (Grant No. 11JCYBJC04900)
文摘We improved the thermal equivalent-circuit model of the laser diode module(LDM) to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal parameters and the transient junction temperature of the LDM are modeled and obtained according to the temperature of the thermistor integrated in the module.Our improved thermal model is verified indirectly by monitoring the emission wavelength of the laser diode against gas absorption lines,and several thermal parameters are obtained with the temperature uncertainty of 0.01 K in the thermal dynamic process.
文摘Increasing the life span and efficiency of Multiprocessor System on Chip(MPSoC)by reducing power and energy utilization has become a critical chip design challenge for multiprocessor systems.With the advancement of technology,the performance management of central processing unit(CPU)is changing.Power densities and thermal effects are quickly increasing in multi-core embedded technologies due to shrinking of chip size.When energy consumption reaches a threshold that creates a delay in complementary metal oxide semiconductor(CMOS)circuits and reduces the speed by 10%–15%because excessive on-chip temperature shortens the chip’s life cycle.In this paper,we address the scheduling&energy utilization problem by introducing and evaluating an optimal energy-aware earliest deadline first scheduling(EA-EDF)based technique formultiprocessor environments with task migration that enhances the performance and efficiency in multiprocessor systemon-chip while lowering energy and power consumption.The selection of core andmigration of tasks prevents the system from reaching itsmaximumenergy utilization while effectively using the dynamic power management(DPM)policy.Increase in the execution of tasks the temperature and utilization factor(u_(i))on-chip increases that dissipate more power.The proposed approach migrates such tasks to the core that produces less heat and consumes less power by distributing the load on other cores to lower the temperature and optimizes the duration of idle and sleep times across multiple CPUs.The performance of the EA-EDF algorithm was evaluated by an extensive set of experiments,where excellent results were reported when compared to other current techniques,the efficacy of the proposed methodology reduces the power and energy consumption by 4.3%–4.7%on a utilization of 6%,36%&46%at 520&624 MHz operating frequency when particularly in comparison to other energy-aware methods for MPSoCs.Tasks are running and accurately scheduled to make an energy-efficient processor by controlling and managing the thermal effects on-chip and optimizing the energy consumption of MPSoCs.
文摘Minimizing the energy consumption to increase the life span and performance of multiprocessor system on chip(MPSoC)has become an integral chip design issue for multiprocessor systems.The performance measurement of computational systems is changing with the advancement in technology.Due to shrinking and smaller chip size power densities onchip are increasing rapidly that increasing chip temperature in multi-core embedded technologies.The operating speed of the device decreases when power consumption reaches a threshold that causes a delay in complementary metal oxide semiconductor(CMOS)circuits because high on-chip temperature adversely affects the life span of the chip.In this paper an energy-aware dynamic power management technique based on energy aware earliest deadline first(EA-EDF)scheduling is proposed for improving the performance and reliability by reducing energy and power consumption in the system on chip(SOC).Dynamic power management(DPM)enables MPSOC to reduce power and energy consumption by adopting a suitable core configuration for task migration.Task migration avoids peak temperature values in the multicore system.High utilization factor(ui)on central processing unit(CPU)core consumes more energy and increases the temperature on-chip.Our technique switches the core bymigrating such task to a core that has less temperature and is in a low power state.The proposed EA-EDF scheduling technique migrates load on different cores to attain stability in temperature among multiple cores of the CPU and optimized the duration of the idle and sleep periods to enable the low-temperature core.The effectiveness of the EA-EDF approach reduces the utilization and energy consumption compared to other existing methods and works.The simulation results show the improvement in performance by optimizing 4.8%on u_(i) 9%,16%,23%and 25%at 520 MHz operating frequency as compared to other energy-aware techniques for MPSoCs when the least number of tasks is in running state and can schedule more tasks to make an energy-efficient processor by controlling and managing the energy consumption of MPSoC.
文摘The district heating system(DHS)consumes a lot of energy in winter,and its control accuracy needs to be improved urgently.To apply advanced process control(APC)in DHS,the thermal dynamic model of the existing buildings is essential.This paper uses the subspace method which is a data-driven approach for modelling the thermal dynamics of the building.The model’s performance is analyzed using the collected data,and the differences compared to the classical methods are also analyzed.The method reduces the RMSE by about 20%compared with the ARX model for the same complexity.Subsequently,the analysis of the training residuals indicates that the estimate of periodic intra-building disturbance can be obtained by minimizing the training residuals.By introducing the estimated disturbance function,the RMSE on the test set is further reduced by 26%.At the end of the article,a simple parameter extrapolation experiment is conducted,and the result shows that the parameters can be extrapolated to other buildings without large errors.
基金Funded by the National Natural Science Foundation of China(50878209 and 51208515)the National Basic Research Program of China(“973”Program)(2013CB036201)
文摘We investigated the temperature dependency of the dynamic mechanical properties of cement asphalt paste by the dynamic mechanical thermal analysis(DMTA) method. The experimental results show that the dynamic mechanical properties of cement asphalt pastes are sensitive to temperature due to the inclusion of asphalt, and may go through different states within a temperature range of-40 ℃ to 60 ℃, which is different from that of pure cement and asphalt. As the temperature of the cement asphalt paste increases, a considerable change of dynamic mechanical properties, including storage modulus(E'), loss modulus(E'') and loss factor(tand) is observed. Moreover, the influence of asphalt to cement(A/C) ratio on the temperature sensitivity of the dynamic mechanical properties of cement asphalt composites was investigated. The temperature dependency of cement asphalt composites is ascribed to the temperature dependency of the asphalt and its interaction with cement paste. A simple fractional model is proposed to describe the viscoelastic behavior of cement asphalt composites.
基金the funding received from the National Key Programme for Developing Basic Sciences of China (2010CB951701)Knowledge Innovation Program of the Chinese Academy of Sciences (KZCX2-YW-Q11-01)+3 种基金Natural Science Foundation of China (40875005)Natural Science Foundation of China for International Cooperation (40810059006)European Commission CEOP-AEGIS (Call FP7-ENV-2007-1 Grant No. 212921)Gansu Science and Technology Key Project (1001JKDA001)
文摘This study was based on the CEOP/CAMP-Tibet observed data at AWS (Automatic Weather Station) of MS3478 in the seasonal frozen soil region of northern Tibetan Plateau from March 2007 to February 2008. The variation characteristics of PE (potential evapotransph'ation) were analyzed based on the Penman-Monteith method recommended by FAO (the Food and Agriculture Organization of the United Na- lions). The contributions of dynamic, thermal and water factors to PE were discussed, and the wet-dry condition of the plateau region was further studied. The results indicated that daily PE was between 0.52 mm and 6.46 mm for the whole year. Monthly PE was over 107 mm from May to September, but decreased to less than 41 mm from November to February. Annual PE was 1,037.8mm. In the summer, thermal PE was significantly more than dynamic PE, but conversely in the winter. Annual variation of thermal PE was of sine wave pattern. In addition, drought and semi-drought climate lasted for a long time while semi-humid climate was short. The effect of water and dynamic factors on PE varied considerably with the seasons. Annual variation of thermal PE was of sine wave pattern.
基金Supported by the Natural Science Foundation of Hubei Province(2014CFB610)the Excellent Young Innovation Team Project of Hubei Province(T201429)
文摘The lattice thermal conductivity of boron nitride nanoribbon(BNNR) is calculated by using equilibrium molecular dynamics(EMD) simulation method. The Green–Kubo relation derived from linear response theory is used to acquire the thermal conductivity from heat current auto-correlation function(HCACF). HCACF of the selected BNNR system shows a tendency of a very fast decay and then be followed by a very slow decay process,finally,approaching zero approximately within 3 ps. The convergence of lattice thermal conductivity demonstrates that the thermal conductivity of BNNR can be simulated by EMD simulation using several thousands of atoms with periodic boundary conditions. The results show that BNNR exhibit lower thermal conductivity than that of boron nitride(BN) monolayer,which indicates that phonons boundary scatting significantly suppresses the phonons transport in BNNR. Vacancies in BNNR greatly affect the lattice thermal conductivity,in detail,only 1% concentration of vacancies in BNNR induce a 60% reduction of the lattice thermal conductivity at room temperature.