The dynamics of steady, two-dimensional magnetohydrodynamics (MHD) free convective flow of micropolar fluid along a vertical porous surface embedded in a thermally stratified medium is investigated. The ratio of press...The dynamics of steady, two-dimensional magnetohydrodynamics (MHD) free convective flow of micropolar fluid along a vertical porous surface embedded in a thermally stratified medium is investigated. The ratio of pressure drop caused by liquid-solid interactions to that of pressure drop caused by viscous resistance are equal;hence, the non-Darcy effect is properly accounted for in the momentum equation. The temperature at the wall and at the free stream which best accounts for thermal stratification are adopted. Similarity transformations are used to convert the nonlinear partial differential equation to a system of coupled non-linear ordinary differential equation and also to parameterize the governing equations. The approximate analytical solution of the corresponding BVP are obtained using Homotopy Analysis Method (HAM). The effects of stratification parameter, thermal radiation and other pertinent parameters on velocity, angular velocity and temperature profiles are shown graphically. It is observed that increase in the stratification parameter leads to decrease in both velocity and temperature distribution and also makes the microrotation distribution to increase near the plate and decrease away from the plate. The influence of both thermal stratification and exponential space dependent internal heat source on velocity, micro-rotation and temperature profiles are presented. The comparison of the solutions obtained using analytical techniques (HAM) and MATLAB package (bvp4c) is shown and a good agreement is observed.展开更多
The influence of different contents of Cr, Mo, and rare earth element(RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr ...The influence of different contents of Cr, Mo, and rare earth element(RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr in medium manganese steel can improved the ordering of C–Mn atomic clusters, so as to improve the steel's thermal conductivity. However, Cr will lead to precipitation of a great deal of carbides in medium manganese steel when its content is greater than 4wt%. These carbides would aggregate around the grain boundary, and as a result, the thermal conductivity is decreased. By the addition of Mo whose content is about 2wt%, spherical carbides will be formed, thus improving the thermal conductivity of the medium manganese steel. The interaction between rare earth elements and alloying elements will raise both the thermal conductivity and the wear-resisting property of medium manganese steel.展开更多
Based on the two-energy equation model, taking into account viscous dissipation due to the interaction between solid skeleton and pore fluid flow, temperature expressions of the solid skeleton and pore fluid flow are ...Based on the two-energy equation model, taking into account viscous dissipation due to the interaction between solid skeleton and pore fluid flow, temperature expressions of the solid skeleton and pore fluid flow are obtained analytically for the thermally developing forced convection in a saturated porous medium parallel plate channel, with walls being at constant temperature. It is proved that the temperatures of the two phases for the local thermal nonequilibrium approach to the temperature derived from the one-energy equation model for the local thermal equilibrium when the heat exchange coefficient goes to infinite. The temperature profiles are shown in figures for different dimensionless parameters and the effects of the parameters on the local thermal nonequilibrium are revealed by parameter study.展开更多
The ability to quantify and predict the energy absorption/transmission characteristics of multi-layered porous medium is imperative if one is involved in the automotive, launch vehicle, commercial aircraft, architectu...The ability to quantify and predict the energy absorption/transmission characteristics of multi-layered porous medium is imperative if one is involved in the automotive, launch vehicle, commercial aircraft, architectural acoustics, petroleum exploration, or even in modeling human tissue. A case in point, the first four aforementioned fields rely on effective Noise and Vibration (NV) development for their commercial success. NV development requires the setting of NV targets at different system levels. The targets are then translated to Transmission Loss (TL), Insertion Loss (IL), and absorption (Alpha) performance for the multi-layered porous materials being utilized. Thus, it behooves to have a thorough understanding of the physics behind the energy dissipating mechanism of the material that entails the effects of the fluid meandering through the pores of the material and its interaction with the structural skeleton. In this section of the project the focus is on the thermal interchange that occurs within the porous medium. Via the acoustic modeling at the micro/macro level it is shown how this thermal exchange affects the acoustic compressibility within the porous material. In order to obtain a comprehensive approach the ensuing acoustic modeling includes the effects due to relaxation process, thus bulk viscosity and instantaneous entropy functions (effects due to vibration of diatomic molecules of air) are incorporated into the equation. The instantaneous entropy functions are explained by means of the Boltzmann’s distribution, partition function, and quantum states. The concept of thermal length and its connection to thermal permeability is clarified. Lastly, the results for TL calculations employing the aforementioned thermal exchange into the Transfer Matrix Method with finite size correction, (FTMM), pertaining to a simple multi-layered material is compared with experimentally obtained data.展开更多
A numerical study on boundary layer flow behaviour, heat and mass transfer characteristics of a nanofluid over an exponentially stretching sheet in a porous medium is presented in this paper. The sheet is assumed to b...A numerical study on boundary layer flow behaviour, heat and mass transfer characteristics of a nanofluid over an exponentially stretching sheet in a porous medium is presented in this paper. The sheet is assumed to be permeable. The governing partial differential equations are transformed into coupled nonlinear ordinary differential equations by using suitable similarity transformations. The transformed equations are then solved numerically using the well known explicit finite difference scheme known as the Keller Box method. A detailed parametric study is performed to access the influence of the physical parameters on longitudinal velocity, temperature and nanoparticle volume fraction profiles as well as the local skin-friction coefficient, local Nusselt number and the local Sherwood number and then, the results are presented in both graphical and tabular forms.展开更多
文摘The dynamics of steady, two-dimensional magnetohydrodynamics (MHD) free convective flow of micropolar fluid along a vertical porous surface embedded in a thermally stratified medium is investigated. The ratio of pressure drop caused by liquid-solid interactions to that of pressure drop caused by viscous resistance are equal;hence, the non-Darcy effect is properly accounted for in the momentum equation. The temperature at the wall and at the free stream which best accounts for thermal stratification are adopted. Similarity transformations are used to convert the nonlinear partial differential equation to a system of coupled non-linear ordinary differential equation and also to parameterize the governing equations. The approximate analytical solution of the corresponding BVP are obtained using Homotopy Analysis Method (HAM). The effects of stratification parameter, thermal radiation and other pertinent parameters on velocity, angular velocity and temperature profiles are shown graphically. It is observed that increase in the stratification parameter leads to decrease in both velocity and temperature distribution and also makes the microrotation distribution to increase near the plate and decrease away from the plate. The influence of both thermal stratification and exponential space dependent internal heat source on velocity, micro-rotation and temperature profiles are presented. The comparison of the solutions obtained using analytical techniques (HAM) and MATLAB package (bvp4c) is shown and a good agreement is observed.
文摘The influence of different contents of Cr, Mo, and rare earth element(RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr in medium manganese steel can improved the ordering of C–Mn atomic clusters, so as to improve the steel's thermal conductivity. However, Cr will lead to precipitation of a great deal of carbides in medium manganese steel when its content is greater than 4wt%. These carbides would aggregate around the grain boundary, and as a result, the thermal conductivity is decreased. By the addition of Mo whose content is about 2wt%, spherical carbides will be formed, thus improving the thermal conductivity of the medium manganese steel. The interaction between rare earth elements and alloying elements will raise both the thermal conductivity and the wear-resisting property of medium manganese steel.
基金Project supported by the National Natural Science Foundation of China (No. 10272070) and the Shanghai Leading Academic Discipline Project (No.Y0103)
文摘Based on the two-energy equation model, taking into account viscous dissipation due to the interaction between solid skeleton and pore fluid flow, temperature expressions of the solid skeleton and pore fluid flow are obtained analytically for the thermally developing forced convection in a saturated porous medium parallel plate channel, with walls being at constant temperature. It is proved that the temperatures of the two phases for the local thermal nonequilibrium approach to the temperature derived from the one-energy equation model for the local thermal equilibrium when the heat exchange coefficient goes to infinite. The temperature profiles are shown in figures for different dimensionless parameters and the effects of the parameters on the local thermal nonequilibrium are revealed by parameter study.
文摘The ability to quantify and predict the energy absorption/transmission characteristics of multi-layered porous medium is imperative if one is involved in the automotive, launch vehicle, commercial aircraft, architectural acoustics, petroleum exploration, or even in modeling human tissue. A case in point, the first four aforementioned fields rely on effective Noise and Vibration (NV) development for their commercial success. NV development requires the setting of NV targets at different system levels. The targets are then translated to Transmission Loss (TL), Insertion Loss (IL), and absorption (Alpha) performance for the multi-layered porous materials being utilized. Thus, it behooves to have a thorough understanding of the physics behind the energy dissipating mechanism of the material that entails the effects of the fluid meandering through the pores of the material and its interaction with the structural skeleton. In this section of the project the focus is on the thermal interchange that occurs within the porous medium. Via the acoustic modeling at the micro/macro level it is shown how this thermal exchange affects the acoustic compressibility within the porous material. In order to obtain a comprehensive approach the ensuing acoustic modeling includes the effects due to relaxation process, thus bulk viscosity and instantaneous entropy functions (effects due to vibration of diatomic molecules of air) are incorporated into the equation. The instantaneous entropy functions are explained by means of the Boltzmann’s distribution, partition function, and quantum states. The concept of thermal length and its connection to thermal permeability is clarified. Lastly, the results for TL calculations employing the aforementioned thermal exchange into the Transfer Matrix Method with finite size correction, (FTMM), pertaining to a simple multi-layered material is compared with experimentally obtained data.
基金ACKNOWLEDGMENTS The work was supported by the National Nature Science Foundation of China （Nos.11161002 and 41001320）, Natural Science Foundation of Jiangxi province （No.20114BAB201016）. Thanks for the useful advices of the editors and the reviewers.
文摘A numerical study on boundary layer flow behaviour, heat and mass transfer characteristics of a nanofluid over an exponentially stretching sheet in a porous medium is presented in this paper. The sheet is assumed to be permeable. The governing partial differential equations are transformed into coupled nonlinear ordinary differential equations by using suitable similarity transformations. The transformed equations are then solved numerically using the well known explicit finite difference scheme known as the Keller Box method. A detailed parametric study is performed to access the influence of the physical parameters on longitudinal velocity, temperature and nanoparticle volume fraction profiles as well as the local skin-friction coefficient, local Nusselt number and the local Sherwood number and then, the results are presented in both graphical and tabular forms.
