Preparation,Structures,Thermal Properties and Sintering Behaviors of B_2O_3-SiO_2-ZnO-BaO-Al_2O_3 Glass

B_2O_3-SiO_2-ZnO-BaO-Al_2O_3 glass with different Al_2O_3 contents（1mol%, 3mol%, 5mol%, and 7mol%） was prepared, and it was intended to be used as lead-free and low-melting glass sealants for solid oxide fuel cells. The effects of Al_2O_3 content on the structures, thermal properties, and sintering behaviors of the B_2O_3-SiO_2-ZnO-BaO-Al_2O_3 glass were investigated in detail. The Al_2O_3 content largely influenced the structures and thermal properties of the glass. When the Al_2O_3 content 5mol%, the transition temperature of the glass decreased with the Al_2O_3 content, while the crystallization temperature increased with the Al_2O_3 content. However, higher Al_2O_3 content degraded the stability of the glass. The B_2O_3-SiO_2-ZnO-BaO-Al_2O_3 glass with 5 mol% Al_2O_3 content exhibits the optimal sintering densification characteristics and can be used as glass sealants for solid oxide fuel cells.

Influence of Yb_2O_3-MgO on Mechanical Properties and Thermal Conductivity of Silicon Nitride Ceramics via Gas Pressure Sintering

In this work,Yb2O3 and Mg O were used as sintering aids in preparing silicon nitride ceramics by gas pressure sintering（ 0. 6 MPa N2atmosphere） to investigate how the amounts of Yb2O3- Mg O influence the mechanical properties and thermal conductivity of silicon nitride ceramics. The total contents of Yb2O3- Mg O added were 1 mol%,2 mol%,4 mol%,6 mol%,8 mol%,10 mol%,12 mol%,14 mol%,keeping the Yb2O3-Mg O molar ratio of 1 ∶ 1 steadily. Curves of the relative density,thermal conductivity and bending strength plotted against the aids content present a ‘mountain＇shape with a maximum at nearly 10 mol% aids. The fracture toughness increased with the amounts of additives up to10 mol% and decreased slightly thereafter. The mechanical properties and thermal conductivity were almost proportional to the amount of the additives before10 mol%. When the content of aids exceeded 10 mol%,it would weaken the mechanical properties and thermal conductivity of the ceramics. The optimum content of Yb2O3- Mg O was 10 mol% by gas pressure sintering（ 0. 6MPa） at 1 850 ℃ for 4 h,which led to a relative density of 98. 9%,a flexural strength of（ 966 ± 38）MPa as well as a fracture toughness of（ 6. 29 ± 0. 29）MPa·m1 /2and thermal conductivity of 82 W /（ m·K）.

Improvement of AlN Thermal Conductivity Based on Reductive Compound Additives

AlN ceramics were prepared by plasma activation sintering(PAS)with compound additives yttrium acetylacetonate(Y(acac)_(3))and melamine(C_(3)H_(6)N_(6)).The effects of compound additives on the microstructure,density,and thermal properties of Al N ceramic were studied.Y(acac)3and C_(3)H_(6)N_(6)can form Y_(2)O_(3),residual organic carbon and reducing gas during the heating process,which improves the Al N sintering performance at a temperature of 1700℃and the bulk thermal conductivity.When the content of Y(acac)_(3)is 10 wt%and C_(3)H_(6)N_(6)is 3 wt%,the thermal conductivity of Al N ceramics is 105.6 W/(m·K),which is much higher than that of Al N ceramics with Y_(2)O_(3)under the same sintering conditions.This work provides theoretical reference for the preparation of high-performance Al N ceramic.

DC Plasma Technology Applied to Powder Metallurgy: an Overview

DC plasma is a very promising technology for processing different materials, and is becoming especially interesting when low environmental impact and high-performance treatments are needed. Some of the intrinsic characteristics of DC plasma technology, which make it suitable for powder metallurgy （PM） and powder injection molding （PIM） parts production, are low- pressure processing and plasma environment high reactivity. Moreover it can be considered as a highly competitive green technology. In this work, an overview of some of the important DC plasma techniques applied to PM and PIM parts processing is presented. Emphasis is given to the descriptions of the main characteristics and the technique potentials of plasma-assisted nitriding, plasma-assisted thermal debinding, plasma-assisted sintering, and simultaneously plasma-assisted sintering and surface alloying. The aspects presented and discussed in this paper indicate that DC plasma processes are promising and competitive techniques for PM and PIM parts processing.

Magnetic Properties and Thermal Stability of Sintered Nd-Fe-B Magnet with Dy-Ni Additive

A sintered（Nd_（0.8）Pr_（0.2））_（30.7）FebalB_（0.98）Cu_（0.2） magnet with 3% intergranular Dy_（85）Ni_（15） additive is prepared to study the magnetic properties and thermal stability of the Nd-Fe-B magnet. The results show that the magnet with or without additive obtains its optimum comprehensive magnetic properties at the sintering temperature of 1 030 ℃ and 1 040 ℃, respectively. The maximum coercivity of the magnet with additive reaches 15.16 k Oe, while that of the magnet without additive is just 11.88 k Oe. Further investigation on microstructure indicates that the grains of the magnet with additive form a modified ＂core shell＂ structure. Adding Dy_（85）Ni_（15） can significantly enhance the coercivity of Nd-Fe-B magnet and thus decrease its coercivity temperature coefficient.