The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated t...The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated temperature surrounding from ambient temperature to 1450 K and a vacuum surrounding from atmosphere pressure to 10-3 Pa, were designed for the transient hot-strip （THS） method. The thermal conductivities of xonotlite-type calcium silicate with four densities from ambient temperature to 1000 K and 0.045 Pa to atmospheric pressure were measured. The results show that the thermal conductivity of xonotlite-type calcium silicate decreases apparently with the fall of density, and decreases apparently with the drop of pressure, and reaches the least value at about 100 Pa. The thermal conductivity of xonotlite-type calcium silicate increases almost linearly with T0, and increases more abundantly with low density than with high density. The thermal conductivity measurement uncertainty is estimated to be approximately 3% at ambient temperature, and 6% at 800 K.展开更多
Four polyoxometalate complexes, (CPFX·HCl)_3H_4SiW_~12 O_~40 , (CPFX·HCl)_3H_3PW_~12 O_~40 , (CPFX·HCl)_3H_3PMo_~12 O_~40 and (CPFX·HCl)_4H_4SiMo_~12 O_~40 , were prepared from ciprofloxacin hydroc...Four polyoxometalate complexes, (CPFX·HCl)_3H_4SiW_~12 O_~40 , (CPFX·HCl)_3H_3PW_~12 O_~40 , (CPFX·HCl)_3H_3PMo_~12 O_~40 and (CPFX·HCl)_4H_4SiMo_~12 O_~40 , were prepared from ciprofloxacin hydrochloride(CPFX·HCl) reacting with H_nXM_~12 O_~40 ·nH_2O(X=P,Si; M=W,Mo) in an aqueous solution, and characterized by elemental analysis, IR spectrometry and TG-DTA. The IR spectrum confirms the presence of Keggin-type anions of heteropoly acids and the characteristic functional groups of ciprofloxacin. The TG/DTA curves show that their thermal decomposition is a multi-step process including simultaneous collapse of the Keggin-type structure. At first, these compounds had a mass loss of water molecules, then several other mass losses occured due to the decomposition of ciprofloxacin hydrochloride and its fragments with the degradation of Keggin anions. The end product of decomposition is the mixture of WO_3(or MoO_3) and SiO_2(or P_2O_5), identified by X-ray diffraction and IR spectroscopy. The possible thermal decomposition mechanisms of these complexes are proposed. This study exemplified that the thermal stability of the complexes containing tungsten is much better than that of the complexes containing molybdenum.展开更多
The nitrogen dimer as both a fundamental building unit in designing a new type of nitrides, and a material gene associated with high electrical and thermal conductivities is investigated by first principles calculatio...The nitrogen dimer as both a fundamental building unit in designing a new type of nitrides, and a material gene associated with high electrical and thermal conductivities is investigated by first principles calculations.The results indicate that the predicted Si N4 is structurally stable and reasonably energy-favored with a striking feature in its band structure that exhibits free electron-like energy dispersions. It possesses a high electrical conductivity（5.07 × 10^5 S/cm） and a high thermal conductivity（371 W/m·K） comparable to copper. The validity is tested by isostructural Al N4 and Si C4. It is demonstrated that the nitrogen dimers can supply a high density of delocalized electrons in this new type of nitrides.展开更多
The curvature type of the thermal lens generated in a zigzag slab laser is numerically analysed. It is found that the curvature type of the thermal lens varies alternatively between the convex and the concave lenses w...The curvature type of the thermal lens generated in a zigzag slab laser is numerically analysed. It is found that the curvature type of the thermal lens varies alternatively between the convex and the concave lenses with the number of bounces of light within the slab, which can be well explained by the trace of the zigzag propagation. In addition, we conclude that the beamlet with a larger number of bounces experiences weaker thermal lensing but more serious wavefront deformation due to the large side lobe portion in the curve of optical path difference.展开更多
The dried gel of SrFe12O19, prepared by citrate approach, was investigated by means of infrared spectroscopy （ IR ）, thermogravimetric analysis （ TG ）, differential scanning calorimetry （ DSC ）, X- ray diffract...The dried gel of SrFe12O19, prepared by citrate approach, was investigated by means of infrared spectroscopy （ IR ）, thermogravimetric analysis （ TG ）, differential scanning calorimetry （ DSC ）, X- ray diffraction（ XRD ） techniques, energy dispersive spectroscopy（ EDS ）, and transmission electron microscopy（ TEM ）. The thermal instability and the thermal decomposition of low-temperature strontium M-type hexaferrite crystallized at about 600℃ were confirmed for the first time by XRD method. The decomposition of the low-temperature strontium M-type hexaferrite took place at about 688.6℃ determined by DSC investigation. The low-temperature strontium M-type hexaferrite nanopartieles were decomposed into SrFeO2.5 with an orthorthombic cell and Fe2O3 with a tetragonal cell as well as possibl α-Fe2O3 . The agglomerated particles with sizes less than 200 nm obtained at 800℃ were plesiomorphous to strontium M-type hexaferrite. The thermally stable strontium M-type hexaferrite nanopartieles with sizes less than 100um cotdd take place at 900 ℃ . Up to 1000 ℃ , the phose transformotion to form strontium M-type hexaferrite was ended, the calcinations with the sizes more than 1μm were composed of α-Fe2O3 and strontium M-type hexaferrite. The method of distinguishing γ-Fe2O3 with a spinel structure from Fe2O3 with tetragonal cells by using powder XRD method was proposed. Fe2O3 with tetragonal cells to be crystallized before the crystallization of thermally stable strontium M-type hexaferrite was confirmed for the first time. The reason why α- Fe2O3 as an additional phase appears in the calcinations is the cationic vacancy of stroutium M-type hexaferrite , SrFe12-x□O19 （0≤x ≤0.5）.展开更多
基金supported by the National Natural Science Foundation of China (No.50806021)
文摘The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated temperature surrounding from ambient temperature to 1450 K and a vacuum surrounding from atmosphere pressure to 10-3 Pa, were designed for the transient hot-strip （THS） method. The thermal conductivities of xonotlite-type calcium silicate with four densities from ambient temperature to 1000 K and 0.045 Pa to atmospheric pressure were measured. The results show that the thermal conductivity of xonotlite-type calcium silicate decreases apparently with the fall of density, and decreases apparently with the drop of pressure, and reaches the least value at about 100 Pa. The thermal conductivity of xonotlite-type calcium silicate increases almost linearly with T0, and increases more abundantly with low density than with high density. The thermal conductivity measurement uncertainty is estimated to be approximately 3% at ambient temperature, and 6% at 800 K.
文摘Four polyoxometalate complexes, (CPFX·HCl)_3H_4SiW_~12 O_~40 , (CPFX·HCl)_3H_3PW_~12 O_~40 , (CPFX·HCl)_3H_3PMo_~12 O_~40 and (CPFX·HCl)_4H_4SiMo_~12 O_~40 , were prepared from ciprofloxacin hydrochloride(CPFX·HCl) reacting with H_nXM_~12 O_~40 ·nH_2O(X=P,Si; M=W,Mo) in an aqueous solution, and characterized by elemental analysis, IR spectrometry and TG-DTA. The IR spectrum confirms the presence of Keggin-type anions of heteropoly acids and the characteristic functional groups of ciprofloxacin. The TG/DTA curves show that their thermal decomposition is a multi-step process including simultaneous collapse of the Keggin-type structure. At first, these compounds had a mass loss of water molecules, then several other mass losses occured due to the decomposition of ciprofloxacin hydrochloride and its fragments with the degradation of Keggin anions. The end product of decomposition is the mixture of WO_3(or MoO_3) and SiO_2(or P_2O_5), identified by X-ray diffraction and IR spectroscopy. The possible thermal decomposition mechanisms of these complexes are proposed. This study exemplified that the thermal stability of the complexes containing tungsten is much better than that of the complexes containing molybdenum.
基金Supported by the National Natural Science Foundation of China under Grant Nos 51532010,91422303,51672306 and 51772322the National Key Research and Development Program of China under Grant No 2016YFA0300604+1 种基金the Beijing Municipal Science&Technology Commission under Grant No Z161100002116018the Strategic Priority Research Program of the Chinese Academy of Sciences under Grant No XDB07020100
文摘The nitrogen dimer as both a fundamental building unit in designing a new type of nitrides, and a material gene associated with high electrical and thermal conductivities is investigated by first principles calculations.The results indicate that the predicted Si N4 is structurally stable and reasonably energy-favored with a striking feature in its band structure that exhibits free electron-like energy dispersions. It possesses a high electrical conductivity（5.07 × 10^5 S/cm） and a high thermal conductivity（371 W/m·K） comparable to copper. The validity is tested by isostructural Al N4 and Si C4. It is demonstrated that the nitrogen dimers can supply a high density of delocalized electrons in this new type of nitrides.
基金supported by the National Natural Science Foundation of China(Grant Nos.50721004 and 60978032)
文摘The curvature type of the thermal lens generated in a zigzag slab laser is numerically analysed. It is found that the curvature type of the thermal lens varies alternatively between the convex and the concave lenses with the number of bounces of light within the slab, which can be well explained by the trace of the zigzag propagation. In addition, we conclude that the beamlet with a larger number of bounces experiences weaker thermal lensing but more serious wavefront deformation due to the large side lobe portion in the curve of optical path difference.
文摘The dried gel of SrFe12O19, prepared by citrate approach, was investigated by means of infrared spectroscopy （ IR ）, thermogravimetric analysis （ TG ）, differential scanning calorimetry （ DSC ）, X- ray diffraction（ XRD ） techniques, energy dispersive spectroscopy（ EDS ）, and transmission electron microscopy（ TEM ）. The thermal instability and the thermal decomposition of low-temperature strontium M-type hexaferrite crystallized at about 600℃ were confirmed for the first time by XRD method. The decomposition of the low-temperature strontium M-type hexaferrite took place at about 688.6℃ determined by DSC investigation. The low-temperature strontium M-type hexaferrite nanopartieles were decomposed into SrFeO2.5 with an orthorthombic cell and Fe2O3 with a tetragonal cell as well as possibl α-Fe2O3 . The agglomerated particles with sizes less than 200 nm obtained at 800℃ were plesiomorphous to strontium M-type hexaferrite. The thermally stable strontium M-type hexaferrite nanopartieles with sizes less than 100um cotdd take place at 900 ℃ . Up to 1000 ℃ , the phose transformotion to form strontium M-type hexaferrite was ended, the calcinations with the sizes more than 1μm were composed of α-Fe2O3 and strontium M-type hexaferrite. The method of distinguishing γ-Fe2O3 with a spinel structure from Fe2O3 with tetragonal cells by using powder XRD method was proposed. Fe2O3 with tetragonal cells to be crystallized before the crystallization of thermally stable strontium M-type hexaferrite was confirmed for the first time. The reason why α- Fe2O3 as an additional phase appears in the calcinations is the cationic vacancy of stroutium M-type hexaferrite , SrFe12-x□O19 （0≤x ≤0.5）.
