Aviation turbine engine oils require excellent thermal-oxidative stability because of their high-temperature environments.High-temperature bearing deposit testing is a mandatory method for measuring the thermal-oxidat...Aviation turbine engine oils require excellent thermal-oxidative stability because of their high-temperature environments.High-temperature bearing deposit testing is a mandatory method for measuring the thermal-oxidative performance of aviation lubricant oils,and the relevant apparatus was improved in the present study.Two different commercial aviation turbine engine oils were tested,one with standard performance(known as the SL oil)and the other with high thermal stability,and their thermal-oxidative stability characteristics were evaluated.After 100 h of high-temperature bearing testing,the SL oil was analyzed by using various analytical techniques to investigate its thermal-oxidative process in the bearing test,with its thermal-oxidative degradation mechanism also being discussed.The results indicate that the developed high-temperature bearing apparatus easily meets the test requirements of method 3410.1 in standard FED-STD-791D.The viscosity and total acid number(TAN)of the SL oil increased with the bearing test time,and various deposits were produced in the bearing test,with the micro-particles of the carbon deposits being sphere-like,rod-like,and sheet-like in appearance.The antioxidant additives in the oil were consumed very rapidly in the first 30 h of the bearing test,with N-phenyl-1-naphthylamine being consumed faster than dioctyldiphenylamine.Overall,the oil thermal-oxidative process involves very complex physical and chemical mechanisms.展开更多
Styrene-butadiene-styrene （SBS） modified bitumen crack filling material with organophilic montmorillonite （OCFM） was prepared by melt blending. X-ray diffraction analysis shows that the interlayer spacing of organ...Styrene-butadiene-styrene （SBS） modified bitumen crack filling material with organophilic montmorillonite （OCFM） was prepared by melt blending. X-ray diffraction analysis shows that the interlayer spacing of organophilic montmorillonite （OMMT） in OCFM is widened and an exfoliated structure may be formed. Thermal-oxidative aging behavior of OCFM and SBS modified bitumen crack filling material （SCFM） was investigated. The experimental results indicate that the rate of thermal-oxidative aging of OCFM is much slower than that of SCFM, which can be attributed to barrier of exfoliated structure of OCFM to oxygen.展开更多
Waste rubber-modified asphalt has good anti-aging properties and can significantly improve the service life of asphalt pavements. For domestic and foreign scholars of rubber modified asphalt thermal oxygen aging, phot...Waste rubber-modified asphalt has good anti-aging properties and can significantly improve the service life of asphalt pavements. For domestic and foreign scholars of rubber modified asphalt thermal oxygen aging, photo-oxidative aging and water aging some behavioural research, and rubber asphalt aging after the characteristics of the research progress are reviewed. Especially rubber-modified asphalt after light, water and other multi-factor agingsituations, the aging situation is more serious, for rubber-modified asphalt mixture aging, rubber asphalt anti-aging process research and analysis means are still very few, the future research must have more thinking.展开更多
In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrason...In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrasonic energy to an electrical energy. The ZnO nanostructures are grown on a silicon wafer by a modified chemical solution method （CSD, chemical-solution-deposition） with a two-step thermal-oxidation approach. The synthesis process can be completed within 1 h. By varying the mixture-ratio of Zn micro-particles in an oxalic acid solution with 0.75 mol/l concentration in the CSD process, the growth mechanism is well-controlled to synthesize three different types of ZnO-nanostructures （i.e., dandelion-like nanostructures, columnar nanostructures, and nanowires）. Furthermore, through oxidizing at different temperatures in the thermal-oxidation process, the featured geometry of the nanostructures （e.g., the length and diameter of a nanowire） is modified. The geometry, size, morphology, crystallization, and material phase of the modified nanostructures are characterized by scanning electron microscopy and X-ray diffraction. Finally, the nanostructures are used to fabricate several micro power-generators. Through the piezoelectric effect, a maximum current density output of 0.28 μA cm-2 generated by a power-generator under an ultrasonic wave is observed.展开更多
基金supported by the National Key Research and Development Program of China(2022YFB3809005)by SINOPEC(120060-6,121027,and 122042).
文摘Aviation turbine engine oils require excellent thermal-oxidative stability because of their high-temperature environments.High-temperature bearing deposit testing is a mandatory method for measuring the thermal-oxidative performance of aviation lubricant oils,and the relevant apparatus was improved in the present study.Two different commercial aviation turbine engine oils were tested,one with standard performance(known as the SL oil)and the other with high thermal stability,and their thermal-oxidative stability characteristics were evaluated.After 100 h of high-temperature bearing testing,the SL oil was analyzed by using various analytical techniques to investigate its thermal-oxidative process in the bearing test,with its thermal-oxidative degradation mechanism also being discussed.The results indicate that the developed high-temperature bearing apparatus easily meets the test requirements of method 3410.1 in standard FED-STD-791D.The viscosity and total acid number(TAN)of the SL oil increased with the bearing test time,and various deposits were produced in the bearing test,with the micro-particles of the carbon deposits being sphere-like,rod-like,and sheet-like in appearance.The antioxidant additives in the oil were consumed very rapidly in the first 30 h of the bearing test,with N-phenyl-1-naphthylamine being consumed faster than dioctyldiphenylamine.Overall,the oil thermal-oxidative process involves very complex physical and chemical mechanisms.
基金Funded by the National Natural Science Foundation of China (50773061)
文摘Styrene-butadiene-styrene （SBS） modified bitumen crack filling material with organophilic montmorillonite （OCFM） was prepared by melt blending. X-ray diffraction analysis shows that the interlayer spacing of organophilic montmorillonite （OMMT） in OCFM is widened and an exfoliated structure may be formed. Thermal-oxidative aging behavior of OCFM and SBS modified bitumen crack filling material （SCFM） was investigated. The experimental results indicate that the rate of thermal-oxidative aging of OCFM is much slower than that of SCFM, which can be attributed to barrier of exfoliated structure of OCFM to oxygen.
文摘Waste rubber-modified asphalt has good anti-aging properties and can significantly improve the service life of asphalt pavements. For domestic and foreign scholars of rubber modified asphalt thermal oxygen aging, photo-oxidative aging and water aging some behavioural research, and rubber asphalt aging after the characteristics of the research progress are reviewed. Especially rubber-modified asphalt after light, water and other multi-factor agingsituations, the aging situation is more serious, for rubber-modified asphalt mixture aging, rubber asphalt anti-aging process research and analysis means are still very few, the future research must have more thinking.
基金the National Science Council of the Republic of China,Taiwan,for fnancially supporting this research under Contract No.NSC 101-2218-E-539001 and NSC 102-2623-E-539-001-ET
文摘In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrasonic energy to an electrical energy. The ZnO nanostructures are grown on a silicon wafer by a modified chemical solution method （CSD, chemical-solution-deposition） with a two-step thermal-oxidation approach. The synthesis process can be completed within 1 h. By varying the mixture-ratio of Zn micro-particles in an oxalic acid solution with 0.75 mol/l concentration in the CSD process, the growth mechanism is well-controlled to synthesize three different types of ZnO-nanostructures （i.e., dandelion-like nanostructures, columnar nanostructures, and nanowires）. Furthermore, through oxidizing at different temperatures in the thermal-oxidation process, the featured geometry of the nanostructures （e.g., the length and diameter of a nanowire） is modified. The geometry, size, morphology, crystallization, and material phase of the modified nanostructures are characterized by scanning electron microscopy and X-ray diffraction. Finally, the nanostructures are used to fabricate several micro power-generators. Through the piezoelectric effect, a maximum current density output of 0.28 μA cm-2 generated by a power-generator under an ultrasonic wave is observed.
