The heated process of raw materials for electron trapping materials (ETM) is investigated by thermo-analysis method. The temperature ranges of raw materials experienced some physical and chemical change processes, suc...The heated process of raw materials for electron trapping materials (ETM) is investigated by thermo-analysis method. The temperature ranges of raw materials experienced some physical and chemical change processes, such as dehydration, organic solvent removal, crystal sulphur burning, oxidation of alkaline earth sulfides and solid phase reaction (rare earth doped) and so on, are obtained. The experimental results also show that the presence of trace oxygen in shielded gas is very harmful to prepare the ETM.The raw material thermo-analysis results provide very important experimental reference for optimizing the ETM preparation techniques.展开更多
BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible...BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible from renewable resources in the form of pure enantiomers. Thus it is used to synthesize main chain cholesteric thermotropic liquid crystalline polymers. Incorporation of phenyl hydroquinone into the backbone of the main chain frustrates chain packing, thus lowering the crystallinity and depressing the melting point below the degradation temperature, also improves the solubility due to disruption of packing and maintains the mechanical and thermal performance. RESULTS: Optical microscopy study reveals that more than 50% of isosorbide content with phenyl hydroquinone and terephthalic acid showed “yellow iridescent oily streaks” with a background of mosaic/marble texture. These are the typical textures of cholesteric liquid crystalline phase. Copolyesters based on phenyl hydroquinone, isosorbide and terephthalic acid are soluble in aprotic solvents like N,N-dimethylacetamide (DMAC), dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Solubility increases with the content of isosorbide percent. Thermal stability of all copolyesters was more than 300?C on the basis of 10% wt loss. CONCLUSIONS: It was found that main chain cholesteric thermotropic liquid crystalline polymers can be prepared form chiral cycloaliphatic diol such as isosorbide. Main chain cholesteric thermotropic liquid crystalline polyesters are prepared from phenyl hydroquinone, isosorbide and terephthalic acid showed thermal stability more than 300?C. Main chain cholesteric thermotropic liquid crystalline polymers are soluble in aprotic solvents like DMAC, DMSO, DMF and NMP.展开更多
Super plasticizer was synthesized by using coal coking by product washing oil and industrial naphthalene. The results show that sulfonationt time （2.5 h）, sulfonation temperature （160 ℃） and condensation time （5...Super plasticizer was synthesized by using coal coking by product washing oil and industrial naphthalene. The results show that sulfonationt time （2.5 h）, sulfonation temperature （160 ℃） and condensation time （5.0 h） are key factors. Adding oxidizing agent MO in the course of synthesis can decrease the emission of SO2 in exhaust （20%）. Compared with NF, NF-30 have some advantages in lower cost, high water reducing rate （19.7%） and optimum early strengths. Moreover, TGA-DTA and SEM analysis were adopted to research the NF-30 modified concrete on hydyation mechanism. The analysis show that, compared with NF, there are a large number of hydration products such as Ca （OH）2, C-S-H, AFt etc of NF-30, the structure of NF-30 is dense and the performance is good.展开更多
The study of non-isothermal kinetics analyzed the reactivity of pine sawdust, while the thermodynamic properties analyzed energy consumed and released from the pine sawdust. The kinetic parameters were determined by a...The study of non-isothermal kinetics analyzed the reactivity of pine sawdust, while the thermodynamic properties analyzed energy consumed and released from the pine sawdust. The kinetic parameters were determined by analyzing mass loss of pine sawdust components by using Thermogravimeric analyzer. The cellulose has the highest conversion rate of 9.5%/min at 610 K compared to hemicellulose and lignin, which are 5%/min at 600 K and 2%/min at 800 K, respectively. The activation Energy for cellulose, hemicellulose and lignin was 457.644, 259.876, and 89.950 kJ/mol, respectively. The thermodynamic properties included the change of Gibbs free energy for cellulose and hemicellulose, which were -214.440 and -30.825 kJ/mol respectively, their degradation was spontaneous in forward direction, while change of Gibbs free energy for lignin was 207.507 kJ/mol, which is non-spontaneous reaction. The positive value of change of entropies for the active complex compounds formed from hemicellulose and cellulose is less stable, while the active complex compounds of lignin are characterized by a much higher degree of arrangement since its change of entropy is negative. The kinetic and thermodynamic properties show that pine sawdust is a good candidate for production of char since it is easier to remove hemicellulose through thermal process.展开更多
文摘The heated process of raw materials for electron trapping materials (ETM) is investigated by thermo-analysis method. The temperature ranges of raw materials experienced some physical and chemical change processes, such as dehydration, organic solvent removal, crystal sulphur burning, oxidation of alkaline earth sulfides and solid phase reaction (rare earth doped) and so on, are obtained. The experimental results also show that the presence of trace oxygen in shielded gas is very harmful to prepare the ETM.The raw material thermo-analysis results provide very important experimental reference for optimizing the ETM preparation techniques.
文摘BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible from renewable resources in the form of pure enantiomers. Thus it is used to synthesize main chain cholesteric thermotropic liquid crystalline polymers. Incorporation of phenyl hydroquinone into the backbone of the main chain frustrates chain packing, thus lowering the crystallinity and depressing the melting point below the degradation temperature, also improves the solubility due to disruption of packing and maintains the mechanical and thermal performance. RESULTS: Optical microscopy study reveals that more than 50% of isosorbide content with phenyl hydroquinone and terephthalic acid showed “yellow iridescent oily streaks” with a background of mosaic/marble texture. These are the typical textures of cholesteric liquid crystalline phase. Copolyesters based on phenyl hydroquinone, isosorbide and terephthalic acid are soluble in aprotic solvents like N,N-dimethylacetamide (DMAC), dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Solubility increases with the content of isosorbide percent. Thermal stability of all copolyesters was more than 300?C on the basis of 10% wt loss. CONCLUSIONS: It was found that main chain cholesteric thermotropic liquid crystalline polymers can be prepared form chiral cycloaliphatic diol such as isosorbide. Main chain cholesteric thermotropic liquid crystalline polyesters are prepared from phenyl hydroquinone, isosorbide and terephthalic acid showed thermal stability more than 300?C. Main chain cholesteric thermotropic liquid crystalline polymers are soluble in aprotic solvents like DMAC, DMSO, DMF and NMP.
基金Funded by the National Natural Science Foundation of China(No.51175004)Educational Commission of Anhui Province of China(No.KJ2012A078)
文摘Super plasticizer was synthesized by using coal coking by product washing oil and industrial naphthalene. The results show that sulfonationt time （2.5 h）, sulfonation temperature （160 ℃） and condensation time （5.0 h） are key factors. Adding oxidizing agent MO in the course of synthesis can decrease the emission of SO2 in exhaust （20%）. Compared with NF, NF-30 have some advantages in lower cost, high water reducing rate （19.7%） and optimum early strengths. Moreover, TGA-DTA and SEM analysis were adopted to research the NF-30 modified concrete on hydyation mechanism. The analysis show that, compared with NF, there are a large number of hydration products such as Ca （OH）2, C-S-H, AFt etc of NF-30, the structure of NF-30 is dense and the performance is good.
文摘The study of non-isothermal kinetics analyzed the reactivity of pine sawdust, while the thermodynamic properties analyzed energy consumed and released from the pine sawdust. The kinetic parameters were determined by analyzing mass loss of pine sawdust components by using Thermogravimeric analyzer. The cellulose has the highest conversion rate of 9.5%/min at 610 K compared to hemicellulose and lignin, which are 5%/min at 600 K and 2%/min at 800 K, respectively. The activation Energy for cellulose, hemicellulose and lignin was 457.644, 259.876, and 89.950 kJ/mol, respectively. The thermodynamic properties included the change of Gibbs free energy for cellulose and hemicellulose, which were -214.440 and -30.825 kJ/mol respectively, their degradation was spontaneous in forward direction, while change of Gibbs free energy for lignin was 207.507 kJ/mol, which is non-spontaneous reaction. The positive value of change of entropies for the active complex compounds formed from hemicellulose and cellulose is less stable, while the active complex compounds of lignin are characterized by a much higher degree of arrangement since its change of entropy is negative. The kinetic and thermodynamic properties show that pine sawdust is a good candidate for production of char since it is easier to remove hemicellulose through thermal process.
