BACKGROUND: Post-stroke fatigue has received much attention recently. Three evaluation scales are available, including the Fatigue Impact Scale (FIS). Yet none of these has been proven to be of use in the evaluatio...BACKGROUND: Post-stroke fatigue has received much attention recently. Three evaluation scales are available, including the Fatigue Impact Scale (FIS). Yet none of these has been proven to be of use in the evaluation of psychological quality after post-stroke fatigue. OBJECTIVE: To introduce FIS into China, and to evaluate the validity and reliability of the Chinese Version in patients with cerebral infarction. DESIGN: Scale evaluation. SETTING: Department of Rehabilitation, Beijing Friendship Hospital, Capital Medical University. PARTICIPANTS: A total of 330 patients with cerebral infarction were selected from the Department of Neurology, Beijing Friendship Hospital, Capital Medical University from June 2005 to December 2006. All patients met diagnostic standards from the Fourth National Cerebrovascular Disease Academic Meeting of China Medical Association and were diagnosed with CT or MRI examination. Patients who were not willing to accept scale evaluation were excluded. METHODS: The English version of FIS was translated into Chinese and subsequently translated back to English again. FIS was given to the discharged patients, and they returned them upon completion. In-patients completed and immediately returned the FIS. Validity and reliability of the retrieved scales were ascertained with descriptive and inference analysis. MAIN OUTCOME MEASURES: Total scores and subscale scores of FIS. RESULTS: Out of 330 questionnaires, 214 valid questionnaires were deemed valid in total. Six components were extracted in factor analysis, and the total cumulative contribution was 73.919%, which suggested the questionnaire was valid. After correlation analysis, 6 components were divided into 3 subscales, including cognitive, physical, and social, which was the same as the English version. The Cronbach α value for the three subscales was 0.937 7, 0.918 8, and 0.940 6, respectively (〉 0.7). CONCLUSION: The reliability and validity of the Chinese version of FIS met with satisfaction and appeared to be adaptable to cerebral infarction patients in China.展开更多
The calculation of fatigue stress ranges due to random waves and ice loads on offshore structures is discussed, and the corresponding accumulative fatigue damages of the structural members are evaluated. To evaluate t...The calculation of fatigue stress ranges due to random waves and ice loads on offshore structures is discussed, and the corresponding accumulative fatigue damages of the structural members are evaluated. To evaluate the fatigue damage to the structures more accurately, the Miner rule is modified considering the fuzziness of the concerned parameters, and a new model for fuzzy fatigue reliability analysis of offshore structures members is developed. Furthermore, an assessment method for predicting the dynamics of the fuzzy fatigue reliability of structural members is provided.展开更多
The objective of this work is to analyze the fatigue reliability of complex welded structures composed of multiple web-frame joints, accounting for correlation effects. A three-dimensional finite element model using t...The objective of this work is to analyze the fatigue reliability of complex welded structures composed of multiple web-frame joints, accounting for correlation effects. A three-dimensional finite element model using the 20-node solid elements is generated. A linear elastic finite element analysis was performed, hotspot stresses in a web-frame joint were analyzed and fatigue damage was quantified employing the S-N approach. The statistical descriptors of the fatigue life of a non-correlated web-frame joint containing several critical hotspots were estimated. The fatigue reliability of a web-frame joint wasmodeled as a series system of correlated components using the Ditlevsen bounds. The fatigue reliability of the entire welded structure with multiple web-frame joints, modeled as a parallel system of non-correlated web-frame joints was also calculated.展开更多
The fuzzy sets theory is introduced into the fatigue reliability analysis. The concepts of maximizing set and minimizing set are developed to decide the ordering value of each fuzzy number, and these values can be use...The fuzzy sets theory is introduced into the fatigue reliability analysis. The concepts of maximizing set and minimizing set are developed to decide the ordering value of each fuzzy number, and these values can be used to determine the order of the fuzzy numbers. On the basis of the works mentioned above, the membership function defining the fuzzy safety event can be calculated, and then the fuzzy reliability in the case of stress and fuzzy fatigue strength is deduced. An example is given to illustrate the method.展开更多
Reliability analysis methods based on the linear damage accumulation law (LDAL) and load-life interference model are studied in this paper. According to the equal probability rule, the equivalent loads are derived, an...Reliability analysis methods based on the linear damage accumulation law (LDAL) and load-life interference model are studied in this paper. According to the equal probability rule, the equivalent loads are derived, and the reliability analysis method based on load-life interference model and recurrence formula is constructed. In conjunction with finite element analysis (FEA) program, the reliability of an aero engine turbine disk under low cycle fatigue (LCF) condition has been analyzed. The results show the turbine disk is safety and the above reliability analysis methods are feasible.展开更多
A state-of-art review is given to the new advances on fatigue reliability design and analysis methods of Chinese railway vehicle's structures. First, the structures are subject to a complicated random fatigue stressi...A state-of-art review is given to the new advances on fatigue reliability design and analysis methods of Chinese railway vehicle's structures. First, the structures are subject to a complicated random fatigue stressing history and this history should be determined by combining dynamic simulation and on-line inspection. Second, the random fatigue constitutions belong to an intrinsic fatigue phenomenon and a probabilistic model is developed to well describe them with two measurements of survival probability and confidence, similar model is also presented for the random stress-life rela- tions and extrapolated appropriately into Song fatigue life regime. Third, concept of the fatigue limit should be understood as the fatigue strength at a given fatigue life and a so-called local Basquin model method is proposed for measuring the random strengths. In addition, drawing and application methods of the Goodman-Smith diagram for integrally characterizing the random fatigue strengths are established in terms of ten kilometers. Fourth, a reliability stress-based method is constructed with a consideration of the random constitutive relations. These new advances form a new frame work for railway fatigue reliability design and analysis.展开更多
First, Wirsching's model, which is widely employed in fatigue reliability anlysis of marine and offshore structures, is analysed systematically. It is found that the very important random variable A in Wirsching...First, Wirsching's model, which is widely employed in fatigue reliability anlysis of marine and offshore structures, is analysed systematically. It is found that the very important random variable A in Wirsching's model can not be directly determined from fatigue experiment because of the irreversibility of fatigue test, and in fact, what Wirsching studied from testing results is not A but a of the statistical Miner's rule. Second, by use of the statistical Miner's rule, a modified Wirsching's model is proposed. Thirdly and more importantly, based on the two-dimensional probabilistic Miner's rule, a new model is established for fatigue reliability analysis of structural components subjected to specified cyclic loading of variable amplitude or stochastic time history. In the end, an example is presented, from which it will be seen that this new model is very convenient to use and feasible to engineering practice.展开更多
This paper describes a methodology for computation of reliability of members of fixed offshore platform structures, with respect to fatigue. Failure criteria were formulated using fracture mechanics principle. The pro...This paper describes a methodology for computation of reliability of members of fixed offshore platform structures, with respect to fatigue. Failure criteria were formulated using fracture mechanics principle. The problem is coined as a “first passage problem”. The method was illustrated through application to a typical plane frame structure. The fatigue reliability degradation curve established can be used for planning in-service inspection of offshore platforms. A very limited parametric study was carried out to obtain insight into the effect of important variables on the fatigue reliability.展开更多
Multiple failuremodes and strength degradation are usually inherent in the gear transmission system,which brings new challenges for conducting fatigue reliability analysis and design.This paper proposes a novel dynami...Multiple failuremodes and strength degradation are usually inherent in the gear transmission system,which brings new challenges for conducting fatigue reliability analysis and design.This paper proposes a novel dynamic fatigue reliability analysis method for failure dependence and strength degradation based on the combination of theCopula function and Gamma process.Firstly,the dynamic simulation model of the gear transmission system is established to obtain the dynamic stress-time history.The Gamma process is then used to describe the strength degradation to establish the dynamic stress-strength interference model.The marginal distribution functions of tooth contact fatigue and dedendumbending fatigue are calculated respectively based on the dynamic interferencemodel.Finally,the joint distribution of the two failure modes can be obtained by the t-Copula function to characterize the failure dependence,and so the dynamic fatigue reliability considering failure dependence can be estimated.The effectiveness of the proposed method is illustrated with examples.The results reveal the temporal law of reliability and the effects of failure dependence on dynamic fatigue reliability.展开更多
The aim of this paper is to evaluate the fatigue reliability with hybrid uncertain parameters based on a residual strength model. By solving the non-probabilistic setbased reliability problem and analyzing the reliabi...The aim of this paper is to evaluate the fatigue reliability with hybrid uncertain parameters based on a residual strength model. By solving the non-probabilistic setbased reliability problem and analyzing the reliability with randomness, the fatigue reliability with hybrid parameters can be obtained. The presented hybrid model can adequately consider all uncertainties affecting the fatigue reliability with hybrid uncertain parameters. A comparison among the presented hybrid model, non-probabilistic set-theoretic model and the conventional random model is made through two typical numerical examples. The results show that the presented hybrid model, which can ensure structural security, is effective and practical.展开更多
In order to consider the effects of elastohydrodynamic lubrication(EHL) on contact fatigue reliability of spur gear, an accurate and efficient method that combines with response surface method(RSM) and first order sec...In order to consider the effects of elastohydrodynamic lubrication(EHL) on contact fatigue reliability of spur gear, an accurate and efficient method that combines with response surface method(RSM) and first order second moment method(FOSM) was developed for estimating the contact fatigue reliability of spur gear under EHL. The mechanical model of contact stress analysis of spur gear under EHL was established, in which the oil film pressure was mapped into hertz contact zone. Considering the randomness of EHL, material properties and fatigue strength correction factors, the proposed method was used to analyze the contact fatigue reliability of spur gear under EHL. Compared with the results of 1.5×105 by traditional Monte-Carlo, the difference between the two failure probability results calculated by the above mentioned methods is 2.2×10-4, the relative error of the failure probability results is 26.8%, and time-consuming only accounts for 0.14% of the traditional Monte-Carlo method(MCM). Sensitivity analysis results are in very good agreement with practical cognition. Analysis results show that the proposed method is precise and efficient, and could correctly reflect the influence of EHL on contact fatigue reliability of spur gear.展开更多
A kind of hybrid reliability model is presented to solve the fatigue reliability problems of steel bridges. The cumulative damage model is one kind of the models used in fatigue reliability analysis. The parameter cha...A kind of hybrid reliability model is presented to solve the fatigue reliability problems of steel bridges. The cumulative damage model is one kind of the models used in fatigue reliability analysis. The parameter characteristics of the model can be described as probabilistic and interval. The two-stage hybrid reliability model is given with a theoretical foundation and a solving algorithm to solve the hybrid reliability problems. The theoretical foundation is established by the consistency relationships of interval reliability model and probability reliability model with normally distributed variables in theory. The solving process is combined with the definition of interval reliability index and the probabilistic algorithm. With the consideration of the parameter characteristics of the S-N curve, the cumulative damage model with hybrid variables is given based on the standards from different countries. Lastly, a case of steel structure in the Neville Island Bridge is analyzed to verify the applicability of the hybrid reliability model in fatigue reliability analysis based on the AASHTO.展开更多
In this study, a new unified creep constitutive relation and a mod- ified energy-based fatigue model have been established respectively to describe the creep flow and predict the fatigue life of Sn-Pb solders. It is f...In this study, a new unified creep constitutive relation and a mod- ified energy-based fatigue model have been established respectively to describe the creep flow and predict the fatigue life of Sn-Pb solders. It is found that the relation successfully elucidates the creep mechanism related to current constitutive relations. The model can be used to describe the temperature and frequency dependent low cycle fatigue behavior of the solder. The relation and the model are further employed in part Ⅱ to develop the numerical simulation approach for the long-term reliability assessment of the plastic ball grid array (BGA) assembly.展开更多
A cumulative damage reliability model of contact fatigue of the rolling bearing is more identical with the actual conditions. It is put forward on the basis of contact fatigue life probability distribution of the roll...A cumulative damage reliability model of contact fatigue of the rolling bearing is more identical with the actual conditions. It is put forward on the basis of contact fatigue life probability distribution of the rolling bearing that obey Weibull distribution and rest on the Miner cumulative damage theory. Finally a case is given to predict the reliability of bearing roller by using these models.展开更多
First of all, the concept of γ_p_S a_S m_N (confidence level_reliability_stress amplitude_stress mean_fatigue life) surface is presented. Then the formulas of p_S a_S m_N surface and γ_p_S a_S m_N ...First of all, the concept of γ_p_S a_S m_N (confidence level_reliability_stress amplitude_stress mean_fatigue life) surface is presented. Then the formulas of p_S a_S m_N surface and γ_p_S a_S m_N surface are derived. In addition, fatigue strength distribution function and two_dimensional reliability Miner rule are obtained. At last, an example is given.展开更多
To evaluate the fatigue damage reliability of critical members of the Nanjing Yangtze river bridge, according to the stress-number curve and Miner’s rule, the corresponding expressions for calculating the structural ...To evaluate the fatigue damage reliability of critical members of the Nanjing Yangtze river bridge, according to the stress-number curve and Miner’s rule, the corresponding expressions for calculating the structural fatigue damage reliability were derived. Fatigue damage reliability analysis of some critical members of the Nanjing Yangtze river bridge was carried out by using the strain-time histories measured by the structural health monitoring system of the bridge. The corresponding stress spectra were obtained by the real-time rain-flow counting method. Results of fatigue damage were calculated respectively by the reliability method at different reliability and compared with Miner’s rule. The results show that the fatigue damage of critical members of the Nanjing Yangtze river bridge is very small due to its low live-load stress level.展开更多
The blade root fatigue is one of important failure modes of turbocharger turbine for vehicle application,and the reliability and life of turbine with blade root fatigue failure mode are studied.Firstly,the stress char...The blade root fatigue is one of important failure modes of turbocharger turbine for vehicle application,and the reliability and life of turbine with blade root fatigue failure mode are studied.Firstly,the stress characteristics of turbine are analyzed,and based on the operating profile of turbocharger corresponding to the endurance test of engine,the stress spectrum of turbine with blade root fatigue failure mode is studied with the simulation method.Then,with the number of endurance test profile cycle as the life parameter,the reliability model and failure rate model of turbine with blade root fatigue failure mode are derived respectively. Finally,the rules that the reliability and failure rate of turbine with the blade root fatigue failure mode changes as life parameters are studied,and the life probabilistic characteristics of turbine are also studied.展开更多
Due to bad working conditions and complicated structure,kinds of complicated cycle loads work on turbine disc, and it's difficult to determine the stress distribution of their equivalent load.Based on the traditio...Due to bad working conditions and complicated structure,kinds of complicated cycle loads work on turbine disc, and it's difficult to determine the stress distribution of their equivalent load.Based on the traditional stress-strength interference model and conditional reliability,the reliability models of turbine disc without the stress distribution are established in this paper. In the range of fatigue limit, by improving fatigue life curve, the relationship between turbine disc's life probability distribution and material GH4133B's is got,and so is the relationship between life and stress.Then,on the basis of test data of smooth material test-piece from references,the fatigue life probability distribution of material testpiece is found out,and then the fatigue life probability distribution of turbine disc is confirmed. The fatigue life probability distribution of turbine disc is taken into reliability model and the reliability of turbine is analyzed disc under random loads. And this analysis result confirms the variation trend of engine's reliability.展开更多
It is reported that laser-processing is effective to repair the heat checks, which are fine shallow cracks on a surfaceof die-casting dies. In this study, the rotating bending fatigue tests have been carried out to ev...It is reported that laser-processing is effective to repair the heat checks, which are fine shallow cracks on a surfaceof die-casting dies. In this study, the rotating bending fatigue tests have been carried out to evaluate the fatiguecharacteristics of laser-processed hot working tool steel. Because test results are scattered, S-N curves are decidedbased on the evaluation of fatigue strength distribution. As a result, the fatigue strength of the laser-processedspecimens decreases remarkably in comparison with that of base metal. However, it can be recovered to almostinitial value by heat treatment at secondary hardening temperature. This procedure is also effective to decrease thescatter of fatigue strength. The laser-processing can be carried out at low cost and this method is effective for theextension of the work life of dies.展开更多
文摘BACKGROUND: Post-stroke fatigue has received much attention recently. Three evaluation scales are available, including the Fatigue Impact Scale (FIS). Yet none of these has been proven to be of use in the evaluation of psychological quality after post-stroke fatigue. OBJECTIVE: To introduce FIS into China, and to evaluate the validity and reliability of the Chinese Version in patients with cerebral infarction. DESIGN: Scale evaluation. SETTING: Department of Rehabilitation, Beijing Friendship Hospital, Capital Medical University. PARTICIPANTS: A total of 330 patients with cerebral infarction were selected from the Department of Neurology, Beijing Friendship Hospital, Capital Medical University from June 2005 to December 2006. All patients met diagnostic standards from the Fourth National Cerebrovascular Disease Academic Meeting of China Medical Association and were diagnosed with CT or MRI examination. Patients who were not willing to accept scale evaluation were excluded. METHODS: The English version of FIS was translated into Chinese and subsequently translated back to English again. FIS was given to the discharged patients, and they returned them upon completion. In-patients completed and immediately returned the FIS. Validity and reliability of the retrieved scales were ascertained with descriptive and inference analysis. MAIN OUTCOME MEASURES: Total scores and subscale scores of FIS. RESULTS: Out of 330 questionnaires, 214 valid questionnaires were deemed valid in total. Six components were extracted in factor analysis, and the total cumulative contribution was 73.919%, which suggested the questionnaire was valid. After correlation analysis, 6 components were divided into 3 subscales, including cognitive, physical, and social, which was the same as the English version. The Cronbach α value for the three subscales was 0.937 7, 0.918 8, and 0.940 6, respectively (〉 0.7). CONCLUSION: The reliability and validity of the Chinese version of FIS met with satisfaction and appeared to be adaptable to cerebral infarction patients in China.
文摘The calculation of fatigue stress ranges due to random waves and ice loads on offshore structures is discussed, and the corresponding accumulative fatigue damages of the structural members are evaluated. To evaluate the fatigue damage to the structures more accurately, the Miner rule is modified considering the fuzziness of the concerned parameters, and a new model for fuzzy fatigue reliability analysis of offshore structures members is developed. Furthermore, an assessment method for predicting the dynamics of the fuzzy fatigue reliability of structural members is provided.
文摘The objective of this work is to analyze the fatigue reliability of complex welded structures composed of multiple web-frame joints, accounting for correlation effects. A three-dimensional finite element model using the 20-node solid elements is generated. A linear elastic finite element analysis was performed, hotspot stresses in a web-frame joint were analyzed and fatigue damage was quantified employing the S-N approach. The statistical descriptors of the fatigue life of a non-correlated web-frame joint containing several critical hotspots were estimated. The fatigue reliability of a web-frame joint wasmodeled as a series system of correlated components using the Ditlevsen bounds. The fatigue reliability of the entire welded structure with multiple web-frame joints, modeled as a parallel system of non-correlated web-frame joints was also calculated.
基金This project is supported by National Naied Science Foundation of China(59475043). Manuscript received on July 8,1999 revised m
文摘The fuzzy sets theory is introduced into the fatigue reliability analysis. The concepts of maximizing set and minimizing set are developed to decide the ordering value of each fuzzy number, and these values can be used to determine the order of the fuzzy numbers. On the basis of the works mentioned above, the membership function defining the fuzzy safety event can be calculated, and then the fuzzy reliability in the case of stress and fuzzy fatigue strength is deduced. An example is given to illustrate the method.
基金Supports provided by Aviation Basic Science Foundation(00B53010)Aerospace Science Foundation(N3CH0502)Shaanxi Province Natural Science Foundation(N3CS0501)are gratefully appreciated.
文摘Reliability analysis methods based on the linear damage accumulation law (LDAL) and load-life interference model are studied in this paper. According to the equal probability rule, the equivalent loads are derived, and the reliability analysis method based on load-life interference model and recurrence formula is constructed. In conjunction with finite element analysis (FEA) program, the reliability of an aero engine turbine disk under low cycle fatigue (LCF) condition has been analyzed. The results show the turbine disk is safety and the above reliability analysis methods are feasible.
基金Selected from Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing(ICFDM'2006)This project is supported by National Natural Science Foundation of China(No.50375130,No.50575189)+1 种基金Foundation for the Author of National Excellent Doctoral Dissertation of China(No.2002034)Program for New Century Excellent Talents in University,China(No.040890).
文摘A state-of-art review is given to the new advances on fatigue reliability design and analysis methods of Chinese railway vehicle's structures. First, the structures are subject to a complicated random fatigue stressing history and this history should be determined by combining dynamic simulation and on-line inspection. Second, the random fatigue constitutions belong to an intrinsic fatigue phenomenon and a probabilistic model is developed to well describe them with two measurements of survival probability and confidence, similar model is also presented for the random stress-life rela- tions and extrapolated appropriately into Song fatigue life regime. Third, concept of the fatigue limit should be understood as the fatigue strength at a given fatigue life and a so-called local Basquin model method is proposed for measuring the random strengths. In addition, drawing and application methods of the Goodman-Smith diagram for integrally characterizing the random fatigue strengths are established in terms of ten kilometers. Fourth, a reliability stress-based method is constructed with a consideration of the random constitutive relations. These new advances form a new frame work for railway fatigue reliability design and analysis.
基金This project was financially supported by the National Science Foundation of China(59605010)and the Postdoctoral Science Foundation of China
文摘First, Wirsching's model, which is widely employed in fatigue reliability anlysis of marine and offshore structures, is analysed systematically. It is found that the very important random variable A in Wirsching's model can not be directly determined from fatigue experiment because of the irreversibility of fatigue test, and in fact, what Wirsching studied from testing results is not A but a of the statistical Miner's rule. Second, by use of the statistical Miner's rule, a modified Wirsching's model is proposed. Thirdly and more importantly, based on the two-dimensional probabilistic Miner's rule, a new model is established for fatigue reliability analysis of structural components subjected to specified cyclic loading of variable amplitude or stochastic time history. In the end, an example is presented, from which it will be seen that this new model is very convenient to use and feasible to engineering practice.
文摘This paper describes a methodology for computation of reliability of members of fixed offshore platform structures, with respect to fatigue. Failure criteria were formulated using fracture mechanics principle. The problem is coined as a “first passage problem”. The method was illustrated through application to a typical plane frame structure. The fatigue reliability degradation curve established can be used for planning in-service inspection of offshore platforms. A very limited parametric study was carried out to obtain insight into the effect of important variables on the fatigue reliability.
基金the National Natural Science Foundation of China under Contract No.51875073the Scientific Research Project of Education Department of Liaoning Province under Contract No.JDL2019005+1 种基金the Dalian Science and Technology Innovation Fund Plan under Contract No.2019J11CY017the Innovation Team Support Plan of Liaoning Higher Education under Contract No.LT2016010.
文摘Multiple failuremodes and strength degradation are usually inherent in the gear transmission system,which brings new challenges for conducting fatigue reliability analysis and design.This paper proposes a novel dynamic fatigue reliability analysis method for failure dependence and strength degradation based on the combination of theCopula function and Gamma process.Firstly,the dynamic simulation model of the gear transmission system is established to obtain the dynamic stress-time history.The Gamma process is then used to describe the strength degradation to establish the dynamic stress-strength interference model.The marginal distribution functions of tooth contact fatigue and dedendumbending fatigue are calculated respectively based on the dynamic interferencemodel.Finally,the joint distribution of the two failure modes can be obtained by the t-Copula function to characterize the failure dependence,and so the dynamic fatigue reliability considering failure dependence can be estimated.The effectiveness of the proposed method is illustrated with examples.The results reveal the temporal law of reliability and the effects of failure dependence on dynamic fatigue reliability.
基金supported by the National Natural Science Foundation of China (90816024, 10872017 and 10876100)the 111 Project (B07009)the Innovation Foundation of Beihang University for PhD Graduates
文摘The aim of this paper is to evaluate the fatigue reliability with hybrid uncertain parameters based on a residual strength model. By solving the non-probabilistic setbased reliability problem and analyzing the reliability with randomness, the fatigue reliability with hybrid parameters can be obtained. The presented hybrid model can adequately consider all uncertainties affecting the fatigue reliability with hybrid uncertain parameters. A comparison among the presented hybrid model, non-probabilistic set-theoretic model and the conventional random model is made through two typical numerical examples. The results show that the presented hybrid model, which can ensure structural security, is effective and practical.
基金Project(CX2014B060)supported by Hunan Provincial Innovation for Postgraduate,ChinaProject(8130208)supported by General Armament Pre-research Foundation,China
文摘In order to consider the effects of elastohydrodynamic lubrication(EHL) on contact fatigue reliability of spur gear, an accurate and efficient method that combines with response surface method(RSM) and first order second moment method(FOSM) was developed for estimating the contact fatigue reliability of spur gear under EHL. The mechanical model of contact stress analysis of spur gear under EHL was established, in which the oil film pressure was mapped into hertz contact zone. Considering the randomness of EHL, material properties and fatigue strength correction factors, the proposed method was used to analyze the contact fatigue reliability of spur gear under EHL. Compared with the results of 1.5×105 by traditional Monte-Carlo, the difference between the two failure probability results calculated by the above mentioned methods is 2.2×10-4, the relative error of the failure probability results is 26.8%, and time-consuming only accounts for 0.14% of the traditional Monte-Carlo method(MCM). Sensitivity analysis results are in very good agreement with practical cognition. Analysis results show that the proposed method is precise and efficient, and could correctly reflect the influence of EHL on contact fatigue reliability of spur gear.
基金Projects(51178042,51578047)supported by the National Natural Science Foundation of ChinaProject(C14JB00340)supported by the Innovative Research Fund in Beijing Jiaotong University,ChinaProject(2014-ZJKJ-03)supported by Science and Technology Research and Development Fund of the China Communications Construction Co.,LTD
文摘A kind of hybrid reliability model is presented to solve the fatigue reliability problems of steel bridges. The cumulative damage model is one kind of the models used in fatigue reliability analysis. The parameter characteristics of the model can be described as probabilistic and interval. The two-stage hybrid reliability model is given with a theoretical foundation and a solving algorithm to solve the hybrid reliability problems. The theoretical foundation is established by the consistency relationships of interval reliability model and probability reliability model with normally distributed variables in theory. The solving process is combined with the definition of interval reliability index and the probabilistic algorithm. With the consideration of the parameter characteristics of the S-N curve, the cumulative damage model with hybrid variables is given based on the standards from different countries. Lastly, a case of steel structure in the Neville Island Bridge is analyzed to verify the applicability of the hybrid reliability model in fatigue reliability analysis based on the AASHTO.
基金The project supported by the National Natural Science Foundation of China (59705008)
文摘In this study, a new unified creep constitutive relation and a mod- ified energy-based fatigue model have been established respectively to describe the creep flow and predict the fatigue life of Sn-Pb solders. It is found that the relation successfully elucidates the creep mechanism related to current constitutive relations. The model can be used to describe the temperature and frequency dependent low cycle fatigue behavior of the solder. The relation and the model are further employed in part Ⅱ to develop the numerical simulation approach for the long-term reliability assessment of the plastic ball grid array (BGA) assembly.
文摘A cumulative damage reliability model of contact fatigue of the rolling bearing is more identical with the actual conditions. It is put forward on the basis of contact fatigue life probability distribution of the rolling bearing that obey Weibull distribution and rest on the Miner cumulative damage theory. Finally a case is given to predict the reliability of bearing roller by using these models.
文摘First of all, the concept of γ_p_S a_S m_N (confidence level_reliability_stress amplitude_stress mean_fatigue life) surface is presented. Then the formulas of p_S a_S m_N surface and γ_p_S a_S m_N surface are derived. In addition, fatigue strength distribution function and two_dimensional reliability Miner rule are obtained. At last, an example is given.
基金Project(2001G025) supported by the Foundation of the Science and Technology Section of Ministry of Rail way of Chinaproject(2005) supported by the Postdoctoral Foundation of Central South University
文摘To evaluate the fatigue damage reliability of critical members of the Nanjing Yangtze river bridge, according to the stress-number curve and Miner’s rule, the corresponding expressions for calculating the structural fatigue damage reliability were derived. Fatigue damage reliability analysis of some critical members of the Nanjing Yangtze river bridge was carried out by using the strain-time histories measured by the structural health monitoring system of the bridge. The corresponding stress spectra were obtained by the real-time rain-flow counting method. Results of fatigue damage were calculated respectively by the reliability method at different reliability and compared with Miner’s rule. The results show that the fatigue damage of critical members of the Nanjing Yangtze river bridge is very small due to its low live-load stress level.
基金National Natural Science Foundation of China(No.51375465)
文摘The blade root fatigue is one of important failure modes of turbocharger turbine for vehicle application,and the reliability and life of turbine with blade root fatigue failure mode are studied.Firstly,the stress characteristics of turbine are analyzed,and based on the operating profile of turbocharger corresponding to the endurance test of engine,the stress spectrum of turbine with blade root fatigue failure mode is studied with the simulation method.Then,with the number of endurance test profile cycle as the life parameter,the reliability model and failure rate model of turbine with blade root fatigue failure mode are derived respectively. Finally,the rules that the reliability and failure rate of turbine with the blade root fatigue failure mode changes as life parameters are studied,and the life probabilistic characteristics of turbine are also studied.
基金Foundation of China Academic Engineering Physics(No.2013B0203028)
文摘Due to bad working conditions and complicated structure,kinds of complicated cycle loads work on turbine disc, and it's difficult to determine the stress distribution of their equivalent load.Based on the traditional stress-strength interference model and conditional reliability,the reliability models of turbine disc without the stress distribution are established in this paper. In the range of fatigue limit, by improving fatigue life curve, the relationship between turbine disc's life probability distribution and material GH4133B's is got,and so is the relationship between life and stress.Then,on the basis of test data of smooth material test-piece from references,the fatigue life probability distribution of material testpiece is found out,and then the fatigue life probability distribution of turbine disc is confirmed. The fatigue life probability distribution of turbine disc is taken into reliability model and the reliability of turbine is analyzed disc under random loads. And this analysis result confirms the variation trend of engine's reliability.
文摘It is reported that laser-processing is effective to repair the heat checks, which are fine shallow cracks on a surfaceof die-casting dies. In this study, the rotating bending fatigue tests have been carried out to evaluate the fatiguecharacteristics of laser-processed hot working tool steel. Because test results are scattered, S-N curves are decidedbased on the evaluation of fatigue strength distribution. As a result, the fatigue strength of the laser-processedspecimens decreases remarkably in comparison with that of base metal. However, it can be recovered to almostinitial value by heat treatment at secondary hardening temperature. This procedure is also effective to decrease thescatter of fatigue strength. The laser-processing can be carried out at low cost and this method is effective for theextension of the work life of dies.