In recent years, cooling technology for liquid xenon(LXe) detectors has advanced driven by the development of dark matter(DM) detectors with target mass in the 100–1000 kg range. The next generation of DM detectors b...In recent years, cooling technology for liquid xenon(LXe) detectors has advanced driven by the development of dark matter(DM) detectors with target mass in the 100–1000 kg range. The next generation of DM detectors based on LXe will be in the 50,000 kg(50 t)range requiring more than 1 k W of cooling power. Most of the prior cooling methods become impractical at this level.For cooling a 50 t scale LXe detector, a method is proposed in which liquid nitrogen(LN2) in a small local reservoir cools the xenon gas via a cold finger. The cold finger incorporates a heating unit to provide temperature regulation. The proposed cooling method is simple, reliable, and suitable for the required long-term operation for a rare event search. The device can be easily integrated into present cooling systems, for example the ‘‘Cooling Bus’ ’employed for the Panda X I and II experiments. It is still possible to cool indirectly with no part of the cooling or temperature control system getting in direct contact with the clean xenon in the detector. Also, the cooling device can be mounted at a large distance, i.e., the detector is cooled remotely from a distance of 5–10 m. The method was tested in a laboratory setup at Columbia University to carry out different measurements with a small LXe detector and behaved exactly as predicted.展开更多
Thermal stabilization of soils (including freezing of thawed soils and cooling of permafrost) is known to be the effective method providing stable support for buildings and structures in cold regions. Seasonal thermo-...Thermal stabilization of soils (including freezing of thawed soils and cooling of permafrost) is known to be the effective method providing stable support for buildings and structures in cold regions. Seasonal thermo-stabilizers (STS) are mainly used in construction. The predicted climate warming because of natural and man-caused factors determines wide application of STS in permafrost regions. A STS transfers heat from its underground part (evaporator) to the aerial part (condenser) owing to natural temperature difference between them during a cold season. We have been working out and manufacturing different types of two-phase, vapor\|liquid STS. Aluminum alloys are used in our STS to prevent corrosion and to increase their efficiency. They are successfully used in the northern regions of Western Siberia, in particular, at the railway Obskaya Bovanenkovo . The paper presents some technical parameters of new STS, the results of their experimental study and computer simulation, as well as experience features.展开更多
基金the Ministry of Science and Technology of China(No.2016YFA0400301)the grants for the XENON Dark Matter Project。
文摘In recent years, cooling technology for liquid xenon(LXe) detectors has advanced driven by the development of dark matter(DM) detectors with target mass in the 100–1000 kg range. The next generation of DM detectors based on LXe will be in the 50,000 kg(50 t)range requiring more than 1 k W of cooling power. Most of the prior cooling methods become impractical at this level.For cooling a 50 t scale LXe detector, a method is proposed in which liquid nitrogen(LN2) in a small local reservoir cools the xenon gas via a cold finger. The cold finger incorporates a heating unit to provide temperature regulation. The proposed cooling method is simple, reliable, and suitable for the required long-term operation for a rare event search. The device can be easily integrated into present cooling systems, for example the ‘‘Cooling Bus’ ’employed for the Panda X I and II experiments. It is still possible to cool indirectly with no part of the cooling or temperature control system getting in direct contact with the clean xenon in the detector. Also, the cooling device can be mounted at a large distance, i.e., the detector is cooled remotely from a distance of 5–10 m. The method was tested in a laboratory setup at Columbia University to carry out different measurements with a small LXe detector and behaved exactly as predicted.
文摘Thermal stabilization of soils (including freezing of thawed soils and cooling of permafrost) is known to be the effective method providing stable support for buildings and structures in cold regions. Seasonal thermo-stabilizers (STS) are mainly used in construction. The predicted climate warming because of natural and man-caused factors determines wide application of STS in permafrost regions. A STS transfers heat from its underground part (evaporator) to the aerial part (condenser) owing to natural temperature difference between them during a cold season. We have been working out and manufacturing different types of two-phase, vapor\|liquid STS. Aluminum alloys are used in our STS to prevent corrosion and to increase their efficiency. They are successfully used in the northern regions of Western Siberia, in particular, at the railway Obskaya Bovanenkovo . The paper presents some technical parameters of new STS, the results of their experimental study and computer simulation, as well as experience features.