LARGE DEFLECTION PROBLEM OF THIN ORTHOTROPIC CIRCULAR PLATE ON ELASTIC FOUNDATION WITH VARIABLE THICKNESS UNDER UNIFORM PRESSURE

Basic equations for large deflection theory of thin orthotropic circular plate on elastic foundation with variable thickness under uniform pressure are derived in this paper. The second opproximation solutions are obtained by means of the modified iteration method. The relation curves of the nondimensional loading and foe deflection, as to the differential ε and μrθ and λ are shown in Figs. 2, 3, 4. In special circumstance, the results are in accordance with those in [1], [6].

NON-LINEAR DYNAMIC BEHAVIOR OF THERMOELASTIC CIRCULAR PLATE WITH VARYING THICKNESS SUBJECTED TO NONCONSERVATIVE LOADING

The non-linear dynamic behaviors of thermoelastic circular plate with varying thickness subjected to radially uniformly distributed follower forces are considered. Two coupled non-linear differential equations of motion for this problem are derived in terms of the transverse deflection and radial displacement component of the mid-plane of the plate. Using the Kantorovich averaging method, the differential equation of mode shape of the plate is derived, and the eigenvalue problem is solved by using shooting method. The eigencurves for frequencies and critical loads of the circular plate with unmovable simply supported edge and clamped edge are obtained. The effects of the variation of thickness and temperature on the frequencies and critical loads of the thermoelastic circular plate subjected to radially uniformly distributed follower forces are then discussed.

Nonlinear Vibration of Circular Plate with Variable Thickness

This paper is concerned with the nonlinear vibration problems of circular plates with variable thickness.The nonlinear equations of plates with variable thickness are extended to the dynamic case.The resulting equations can be solved by using an iterative method,a Galerkin's approach and a perturbation method.Detailed solutions and numerical results are given for two kinds of boundary conditions,the clamped edge and the supported edge.The results show that the solutions for the case of the plates with uniform thickness can be included in the solution herin as a special case.The effect of various thickness parameters is investigated in detail.Also,a Runge Kutta method is used to solve the free and forced vibrations of plates with variable thickness,and the results are obtained firstly.It has shown that the adoption of variable thickness plate would be useful in engineering design.

Exact solutions for axisymmetric flexural free vibrations of inhomogeneous circular Mindlin plates with variable thickness

Circular plates with radially varying thickness, stiffness, and density are widely used for the structural optimization in engineering. The axisymmetric flexural free vibration of such plates, governed by coupled differential equations with variable coefficients by use of the Mindlin plate theory, is very difficult to be studied analytically. In this paper, a novel analytical method is proposed to reduce such governing equations for circular plates to a pair of uncoupled and easily solvable differential equations of the Sturm-Liouville type. There are two important parameters in the reduced equations. One describes the radial variations of the translational inertia and fiexural rigidity with the consideration of the effect of Poisson＇s ratio. The other reflects the comprehensive effect of the rotatory inertia and shear deformation. The Heun-type equations, recently well-known in physics, are introduced here to solve the flexural free vibration of circular plates analytically, and two basic differential formulae for the local Heun-type functions are discovered for the first time, which will be of great value in enriching the theory of Heun-type differential equations.

THE PROBLEM OF THE NON-LINEAR UNSYMMETRICAL BENDING FOR CYLINDRICALLY ORTHOTROPIC CIRCULAR THIN PLATE WITH VARIABLE THICKNESS

To begin with, in this paper, the governing equations of the problem of the non-linear unsymmetrical bending for cylindrically orthotropic circular thin plate with variable thickness are derived. By using 'the method of two-variable' and introducing four small parameters, the problem of the non-linear unsymmetrical bending for cylindrically orthotropic circular thin plate with linear variable thickness are studied, and the uniformly valid asymptotic solution of Nth-order for epsilon(1) and Mth-order for epsilon(2) are obtained.

Effect of Foundation and Non-Homogeneity on the Vibrations of Polar Orthotropic Parabolically Tapered Circular Plates

The effect of Pasternak foundation and non-homogenity on the axisymmetric vibrations of polar orthotropic parabolically varying tapered circular plates has been analyzed on the basis of classical plate theory. Ritz method has been used to find the numerical solution of the specified problem. The efficiency of the Ritz method depends on the choice of basis function based upon deflection of polar orthotropic plates. The effects of different plate parameters viz. elastic foundation, non-homogeneity, taper parameter and that of orthotropy on fundamental, second and third mode of vibration have been studied for clamped and simply-supported boundary conditions. Mode shapes for specified plates have been drawn for both the boundary conditions. Convergence and comparison studies have been carried out for specified plates.

变厚度圆板自由振动的研究

针对弹性边界条件下变厚度圆板的自由振动问题,提出一种改进Fourier级数法来研究其振动特性。在沿圆板的边界均匀的设置弹簧以模拟弹性边界,包括横向位移弹簧和旋转约束弹簧。首先建立圆板的能量表达式,再通过瑞利-里兹法进行求解,把振动问题转化为矩阵特征值问题。数值仿真验证过程中当边界条件改变时,只需要改变仿真模型中的弹簧刚度系数就可改变系统的质量矩阵和刚度矩阵,得到其振动频率和模态等特性。数值结果表明,该方法简便合理,具有较好的推广价值。

INVESTIGATION OF THE THICKNESS VARIABILITY AND MATERIAL HETEROGENEITY EFFECTS ON FREE VIBRATION OF THE VISCOELASTIC CIRCULAR PLATES

The present study deals with free vibration analysis of variable thickness viscoelastic circular plates made of heterogeneous materials and resting on two-parameter elastic foundations in addition to their edge conditions. It is assumed that the viscoelastic material properties vary in the transverse and radial directions simultaneously. The complex modulus approach is employed in conjunction with the elastic-viscoelastic correspondence principle to obtain the solution. The governing equations are solved by means of a power series solution. Finally, a sensitivity analysis including evaluation of effects of various edge conditions, thickness variations, coefficients of the elastic foundation, and material loss factor and heterogeneity on the natural frequencies and modal loss factors is accomplished.

FGM中厚圆板轴对称自由振动的打靶法求解

研究了由陶瓷和金属两种材料组成的功能梯度材料(FGM)中厚圆板的自由振动问题。基于考虑横向剪切变形中厚板的几何方程、物理方程及平衡方程,建立了以中面转角和横向位移为基本未知量的功能梯度中厚圆板轴对称自由振动问题的控制方程;假定功能梯度中厚圆板的材料性质方向按照幂函数连续变化规律;采用打靶法数值求解所得非线性两点边值问题出,获得了多种边界下功能梯度中厚圆板的无量纲自然频率以及振动模态。讨论了材料梯度指数、板的厚度以及边界条件对自然频率的影响。

陶瓷基FGM材料线形变厚度圆板的热后屈曲

建立沿半径线形变厚度陶瓷基功能梯度材料(functionally graded material,FGM)圆板在热环境中后屈曲控制微分方程,采用打靶法研究陶瓷二氧化锆基变厚度圆板在温度场中的后屈曲行为,给出了均匀和非均匀升温场中变厚度圆板的热后屈曲平衡路径特性曲线,讨论陶瓷梯度指标和厚度变化系数对后屈曲行为的影响。数值结果表明:非均匀升温下FGM圆板的热临界载荷小于均匀升温下的临界载荷;径向厚度的变化并不会影响热临界载荷的值,但会影响到屈曲以后的平衡路径;中心挠度随变厚度系数的增加而增加。

弹性半空间上中厚圆板弯曲的Fourier-Bessel级数解

本文对各向同性弹性半空间地基上中厚度圆板一般弯曲问题进行了系统的分析。板的挠度、荷载、地基反力及板下地基表面的沉降均被展开为二重Fourier-Bessel级数,这些级数中的待定系数由板的边界条件、板的控制方程及板-地基的相容条件加以确定,从而将弹性半空间地基与中厚度圆板的相互作用问题转化为数值积分和代数方程组的求解问题。数值计算表明,该级数解具有较快的收敛速度。

超声珩齿新型变幅器动力学特性研究

为解决超声珩齿振动系统的设计问题,将齿轮简化为厚环盘,基于变截面变幅杆纵向振动波动方程和中厚圆环板弯曲振动位移方程,根据中间有孔圆锥型变幅杆与中厚圆环组成的新型超声珩齿变幅器的非谐振性和边界条件,推导出了系统谐振频率方程,利用数值计算分析了变幅器的几何参数对系统谐振频率的影响。通过有限元分析得出变幅器的谐振频率与理论计算结果基本一致。在此基础上,对设计的变幅器进行了动力学试验,测得的动力学参数与理论结果一致,其结果不仅证实了非谐振理论的正确性,而且为超声珩齿变幅器的设计和应用提供了理论依据。

厚圆板轴对称振动的弹性力学解

本文以轴对称三维弹性力学基本方程为基础,导出厚圆板强迫振动的状态方程式。利用Maclaurin级数和Sylvester定理,厚圆板的位移和应力可以用中面位移和应力的微分算子表示。通过载荷分解和圆板表面条件,可以得到厚圆板在对称载荷与反对称载荷作用下的振动控制方程。求解了厚圆板在周边固支和简支条件下的对称与反对称的自由振动问题。通过数值计算得到了这两类自由振动的固有频率。 本文的方法适用于求解厚圆板在任意厚跨比的强迫振动和自由振动的问题。

变厚度圆板弯曲问题的差分解法

利用有限差分法求解了两种变厚度圆板受均布载荷作用弯曲的数值解。算例表明，该法具有很高的精度。

应用双剪应力屈服准则求解某些塑性力学问题

文章导出了双剪应力屈服准则的塑性功串表达式及在平面应力条件下的三维图形;用上下限定理精确求出受均载的简支圆板及受轴力与内压联合作用下厚壁圆筒的极限载荷,并与用Mises和Treca屈服准则计算的结果作了对比。

饱和弹性半空间地基与中厚圆板的动力相互作用

利用Fourier-Bessel级数,对横观各向同性饱和弹性半空间地基与中厚圆板的动力相互作用问题进行了系统地分析。板的位移函数、荷载、地基反力及板下地基表面的沉降均被展开为二重Fourier-Bessel级数,这些级数中的待定系数由板的边界条件、板的控制方程及板-地基的相容条件加以确定,从而将饱和弹性半空间地基与中厚圆板的动力相互作用问题转化为数值积分和代数方程组的求解问题。数值计算表明,该级数解答具有较快的收敛速度。可以将该方法推广到弹性半空间与梁、矩形板相互作用问题的分析。

层合压电压磁耦合弹性介质圆板的状态变量解

从横观各向同性层状压电、压磁耦合弹性介质材料的基本方程出发 ,导出了压电、压磁圆板在轴对称变形中的状态变量方程 ,并对其进行有限 Hankel变换 ,得到一组常系数的常微分方程 ,再通过 Caylay-Hamilton原理和利用传递矩阵方法导出了层合压电、压磁耦合弹性介质圆板的状态变量解 .

均质弹性半空间地基上厚圆板精确解

本文得到了均质弹性半空间地基上,承受中心集中载荷作用的周边自由的厚圆板弯曲问题的精确解。并给出了数值算例。

SEMI-ANALYTICAL SOLUTION FOR FREE VIBRATION OF THICK FUNCTIONALLY GRADED PLATES RESTED ON ELASTIC FOUNDATION WITH ELASTICALLY RESTRAINED EDGE

This paper deals with free vibration analysis of functionally graded thick circular plates resting on the Pasternak elastic foundation with edges elastically restrained against translation and rotation.Governing equations are obtained based on the first order shear deformation theory（FSDT） with the assumption that the mechanical properties of plate materials vary continuously in the thickness direction.A semi-analytical approach named differential transform method is adopted to transform the differential governing equations into algebraic recurrence equations.And eigenvalue equation for free vibration analysis is solved for arbitrary boundary conditions.Comparison between the obtained results and the results from analytical method confirms an excellent accuracy of the present approach.Afterwards,comprehensive studies on the FG plates rested on elastic foundation are presented.The effects of parameters,such as thickness-to-radius,material distribution,foundation stiffness parameters,different combinations of constraints at edges on the frequency,mode shape and modal stress are also investigated.

基于Mindlin理论的厚阶梯圆盘弯曲振动特性研究

阶梯圆盘辐射体因其辐射面积大、辐射效率高等优点在大功率超声领域获得了广泛的应用。从声学应用角度,基于Mindlin理论推导了厚阶梯圆盘在自由、固定、简支边界条件下的频率方程,并分别对频率方程进行数值求解,结果表明计算得到的频率与有限元模拟及实验测试结果基本相符。该结论为厚盘的弯曲振动辐射器的设计提供了理论参考。