The room and pillar method is usually used to extract coal from shallowly buried seams with thin bedrock. This results in a very low production efficiency and in a low degree of extraction. In recent years short-wall ...The room and pillar method is usually used to extract coal from shallowly buried seams with thin bedrock. This results in a very low production efficiency and in a low degree of extraction. In recent years short-wall continuous mechanical mining has been extensively used in many situations except shallowly buried coal seams with thin bedrock. The principles governing movement of the overlying strata above the 2-2 coal seam were deduced from in-situ experience, laboratory data, calculations and computer simulations. The thicknesses of the bedrock in the Shendong Coal Field where the coal is shallowly buried are classified into 5 types: <10 m, 10–15 m, 15–25 m, 25–35 m and >35 m, which was done using fuzzy clustering results. A series of reasonable, relative parameters in each category have been calculated and analyzed. One proposed way to perform short-wall continuous mechanical mining in shallowly buried coal seams is given. This is significant for coal mines with similar geological conditions.展开更多
A set of adaptable conditions classification of aquifer-protective mining in the Iongwall coalface for shallow coal seams with thin bedrock was put forward to deal with the conflict between water protection and high e...A set of adaptable conditions classification of aquifer-protective mining in the Iongwall coalface for shallow coal seams with thin bedrock was put forward to deal with the conflict between water protection and high efficiency for the mining field in west China. This classification was suitable for shallow coal seams with different thickness and was beneficial to the local environmental protection. Using the 3-Universal Distinct Element Code （3DEC） numerical software, the height of the fractured zones for shallow coal seams with thin bedrock was calculated and analyzed, and its predicting formula was achieved. Meanwhile, according to the lithology and the weathering degree of the shallow coal seam the thickness of the protective layer was determined as 10 m and the overlying water body of loose water-bearing sand for shallow coal seams with thin bedrock was divided into three types, namely, weak, medium and strong. Based on these, the necessary bedrock thickness of the Iongwall coalface for shallow coal seams with thin bedrock was confined according to the different mining height and water yield nature of the overlying loose water-bearing sand. Combined with the present mining status, a set of new methods of adaptable conditions classification of aquifer-protective mining technology in the Iongwall coalface for shallow coal seams with thin bedrock was put forward.展开更多
To prevent support crush, the overlying strata safe thickness and its influential elements were studied by the adoption of theoretical analysis, numerical simulation and in-situ measurement. According to the productio...To prevent support crush, the overlying strata safe thickness and its influential elements were studied by the adoption of theoretical analysis, numerical simulation and in-situ measurement. According to the production and geological condition of first face in Sima coal mine, the results indicate that the clay contains large permissible bearing ability and has better arching force. After mining destruction, stable structure is formed in bedrock to ensure face safety. The clay thickness ＆ bedrock thickness are the key influential elements to stable structure. The minimal bedrock thickness is about 40 m to ensure safe mining under loose surface soil condition. When surface soil contains mainly thick clay, it forms steady structure with the composition of thin bedrock, so that it can reduce minimal thickness of bedrock and to ensure safe mining. When clay thickness is 40 m, minimal bedrock thickness is 20 m. When clay thickness is 30 m, minimal bedrock thickness is 30 m. Bearing pressure peak ranges from 5 to 15 m in the front face under thin bedrock condition. The bearing pressure distribution range is 15 m. Main roof break distance is small, and initial weighting of main roof is not distinctive, while first periodic weighting of main roof is quite distinctive.展开更多
基金Projects NCET-05-0480 supported by the Program for New Century Excellent Talents in University07KF09 by the 2007 Research Fund of the State Key Laboratory of Coal Resources and Mine Safety
文摘The room and pillar method is usually used to extract coal from shallowly buried seams with thin bedrock. This results in a very low production efficiency and in a low degree of extraction. In recent years short-wall continuous mechanical mining has been extensively used in many situations except shallowly buried coal seams with thin bedrock. The principles governing movement of the overlying strata above the 2-2 coal seam were deduced from in-situ experience, laboratory data, calculations and computer simulations. The thicknesses of the bedrock in the Shendong Coal Field where the coal is shallowly buried are classified into 5 types: <10 m, 10–15 m, 15–25 m, 25–35 m and >35 m, which was done using fuzzy clustering results. A series of reasonable, relative parameters in each category have been calculated and analyzed. One proposed way to perform short-wall continuous mechanical mining in shallowly buried coal seams is given. This is significant for coal mines with similar geological conditions.
基金Supported by National Natural Science Foundation of China(50904063)the 2007 Research Fund of the State Key Laboratory of Coal Resources and Mine Safety(07KF09)Scientific Research Foundation of China University of Mining & Technology(2008A003,2005B002)
文摘A set of adaptable conditions classification of aquifer-protective mining in the Iongwall coalface for shallow coal seams with thin bedrock was put forward to deal with the conflict between water protection and high efficiency for the mining field in west China. This classification was suitable for shallow coal seams with different thickness and was beneficial to the local environmental protection. Using the 3-Universal Distinct Element Code （3DEC） numerical software, the height of the fractured zones for shallow coal seams with thin bedrock was calculated and analyzed, and its predicting formula was achieved. Meanwhile, according to the lithology and the weathering degree of the shallow coal seam the thickness of the protective layer was determined as 10 m and the overlying water body of loose water-bearing sand for shallow coal seams with thin bedrock was divided into three types, namely, weak, medium and strong. Based on these, the necessary bedrock thickness of the Iongwall coalface for shallow coal seams with thin bedrock was confined according to the different mining height and water yield nature of the overlying loose water-bearing sand. Combined with the present mining status, a set of new methods of adaptable conditions classification of aquifer-protective mining technology in the Iongwall coalface for shallow coal seams with thin bedrock was put forward.
基金Supported by the National Natural Science Foundation of China（50504014）
文摘To prevent support crush, the overlying strata safe thickness and its influential elements were studied by the adoption of theoretical analysis, numerical simulation and in-situ measurement. According to the production and geological condition of first face in Sima coal mine, the results indicate that the clay contains large permissible bearing ability and has better arching force. After mining destruction, stable structure is formed in bedrock to ensure face safety. The clay thickness ＆ bedrock thickness are the key influential elements to stable structure. The minimal bedrock thickness is about 40 m to ensure safe mining under loose surface soil condition. When surface soil contains mainly thick clay, it forms steady structure with the composition of thin bedrock, so that it can reduce minimal thickness of bedrock and to ensure safe mining. When clay thickness is 40 m, minimal bedrock thickness is 20 m. When clay thickness is 30 m, minimal bedrock thickness is 30 m. Bearing pressure peak ranges from 5 to 15 m in the front face under thin bedrock condition. The bearing pressure distribution range is 15 m. Main roof break distance is small, and initial weighting of main roof is not distinctive, while first periodic weighting of main roof is quite distinctive.
