Thin polymer electrolyte with MXene functional layer for uniform Li^(+) deposition in all-solid-state lithium battery

Solid polymer electrolyte(SPE) shows great potential for all-solid-state batteries because of the inherent safety and flexibility;however, the unfavourable Li+deposition and large thickness hamper its development and application. Herein, a laminar MXene functional layer-thin SPE layer-cathode integration(MXene-PEO-LFP) is designed and fabricated. The MXene functional layer formed by stacking rigid MXene nanosheets imparts higher compressive strength relative to PEO electrolyte layer. And the abundant negatively-charged groups on MXene functional layer effectively repel anions and attract cations to adjust the charge distribution behavior at electrolyte–anode interface. Furthermore,the functional layer with rich lithiophilic groups and outstanding electronic conductivity results in low Li nucleation overpotential and nucleation energy barrier. In consequence, the cell assembled with MXene-PEO-LFP, where the PEO electrolyte layer is only 12 μm, much thinner than most solid electrolytes, exhibits uniform, dendrite-free Li+deposition and excellent cycling stability. High capacity(142.8 mAh g-1), stable operation of 140 cycles(capacity decay per cycle, 0.065%), and low polarization potential(0.5 C) are obtained in this Li|MXene-PEO-LFP cell,which is superior to most PEO-based electrolytes under identical condition. This integrated design may provide a strategy for the large-scale application of thin polymer electrolytes in all-solid-state battery.

Ultrathin Zincophilic Interphase Regulated Electric Double Layer Enabling Highly Stable Aqueous Zinc‑Ion Batteries

The practical application of aqueous zinc-ion batteries for large-grid scale systems is still hindered by uncontrolled zinc dendrite and side reactions.Regulating the elec-trical double layer via the electrode/electrolyte interface layer is an effective strategy to improve the stability of Zn anodes.Herein,we report an ultrathin zincophilic ZnS layer as a model regu-lator.At a given cycling current,the cell with Zn@ZnS electrode displays a lower potential drop over the Helmholtz layer(stern layer)and a suppressed diffuse layer,indicating the regulated charge distribution and decreased electric double layer repulsion force.Boosted zinc adsorption sites are also expected as proved by the enhanced electric double-layer capacitance.Consequently,the symmetric cell with the ZnS protection layer can stably cycle for around 3,000 h at 1 mA cm^(-2) with a lower overpotential of 25 mV.When coupled with an I2/AC cathode,the cell demonstrates a high rate performance of 160 mAh g^(-1) at 0.1 A g^(-1) and long cycling stability of over 10,000 cycles at 10 A g^(-1).The Zn||MnO_(2) also sustains both high capacity and long cycling stability of 130 mAh g^(-1) after 1,200 cycles at 0.5 A g^(-1).

Preparation Process and Thin Layer Chromatography Identification of Wufang Babu Poultice

[Objectives] To establish the process flow of preparation of Wufang Babu Poultice and the identification method of thin layer chromatography (TLC). [Methods] For the forming process of Wufang Babu Poultice, the preparation method of mixed pharmaceutical powder with suitable pharmaceutical excipients was adopted. Qualitative identification of medicinal materials in Wufang Babu Poultice (Strychni Semen, Rhei Radix Et Rhizoma, Dipsaci Radix, and Angelicae Sinensis Radix) was carried out by TLC. [Results] Mixed pharmaceutical powder mixed with glycerol, gelatin and other pharmaceutical excipients can be prepared for forming. The test solution chromatography of each medicinal material (Strychni Semen, Rhei Radix et Rhizoma, Dipsaci Radix, Angelicae Sinensis Radix) showed pigment spots of the same color at the same position as its corresponding control medicinal materials and reference chromatography, and the display was clear. [Conclusions] The preparation process is simple and feasible, and can be used as the forming process of Wufang Babu Poultice. The TLC determination method is simple to operate, has good specificity, and has no effect on negative results, and can be used for identification of Wufang Babu Poultice.

Thin Layer Identification of Jiedu Shengxue Granules and Determination of Notoginsenoside R1 Content

[Objectives]To establish the quality standard of hospital preparation Jiedu Shengxue granules.[Methods]Scleromitrion diffusum and Prunella vulgaris in Jiedu Shengxue granules were qualitatively identified by thin layer chromatography(TLC).A high performance liquid chromatography(HPLC)was established to determine the content of notoginsenoside R1 in the granule.[Results]The traditional Chinese medicinal materials in Jiedu Shengxue granules could be identified by TLC,and the characteristic spots were stable and clear.Notoginsenoside R1 had a good linear relationship in the range of 10.45-104.5μg/mL,with an average recovery of 98.52%and RSD=2.36%.[Conclusions]TLC and HPLC,as the quality control methods of Jiedu Shengxue granules,have high accuracy and good repeatability,which lays a foundation for the quality control of this mixture.

Determination of Natural Logarithm of Diffusion Coefficient and Activation Energy of Thin Layer Drying Process of Ginger Rhizome Slices

This study is an extension of the previous work done with ARS-680 Environmental Chamber. Drying is a complex operation that demands much energy and time. Drying is essentially important for preservation of ginger rhizome. Drying of ginger was modeled, and then the effective diffusion coefficient and activation energy were determined. For this purpose, the experiments were done at six levels of varied temperatures: 10°C, 20°C, 30°C, 40°C, 50°C and 60°C. The values of effective diffusion coefficients obtained in this work for the variously treated ginger rhizomes closely agreed with the average effective diffusion coefficients of other notable authors who determined the drying kinetics and convective heat transfer coefficients of ginger slices.

Numerical Study and Optimization of CZTS-Based Thin-Film Solar Cell Structure with Different Novel Buffer-Layer Materials Using SCAPS-1D Software

This study explored the performances of CZTS-based thin-film solar cell with three novel buffer layer materials ZnS, CdS, and CdZnS, as well as with variation in thickness of buffer and absorber-layer, doping concentrations of absorber-layer material and operating temperature. Our aims focused to identify the most optimal thin-film solar cell structure that offers high efficiency and lower toxicity which are desirable for sustainable and eco-friendly energy sources globally. SCAPS-1D, widely used software for modeling and simulating solar cells, has been used and solar cell fundamental performance parameters such as open-circuited voltage (), short-circuited current density (), fill-factor() and efficiency() have been optimized in this study. Based on our simulation results, it was found that CZTS solar cell with Cd0.4Zn0.6S as buffer-layer offers the most optimal combination of high efficiency and lower toxicity in comparison to other structure investigated in our study. Although the efficiency of Cd0.4Zn0.6S, ZnS and CdS are comparable, Cd0.4Zn0.6S is preferable to use as buffer-layer for its non-toxic property. In addition, evaluation of performance as a function of buffer-layer thickness for Cd0.4Zn0.6S, ZnS and CdS showed that optimum buffer-layer thickness for Cd0.4Zn0.6S was in the range from 50 to 150nm while ZnS offered only 50 – 75 nm. Furthermore, the temperature dependence performance parameters evaluation revealed that it is better to operate solar cell at temperature 290K for stable operation with optimum performances. This study would provide valuable insights into design and optimization of nanotechnology-based solar energy technology for minimizing global energy crisis and developing eco-friendly energy sources sustainable and simultaneously.

Secondary metabolite credentials ofEvolvulus alsinoides by high performance thin layer chromatography(HPTLC)

Plants and plant-based products are the bases of many modern pharmaceuticals that are current in use today for various diseases.The aim of the study was to investigate the biochemical constituents and high performance thin layer chromatography（HPTLC） finger printing of the ethanolic extract of Evolvulus alsinoides.Phytochemical screening was done by standard procedures and HPTLC method was also established to analyze alkaloids,flavonoids and phenolic compounds from the ethanolic extract of Evolvulus alsinoides.Preliminary phytochemical screening showed that ethanol extracted more secondary metabolites than other solvents.HPTLC fingerprinting analysis showed the presence of various alkaloids,flavonoids and phenols（quercetin） in the ethanolic extract.It can be concluded that Evolvulus alsinoides may serve as a source of potent antioxidants that may be used in the prevention of various diseases such as cancer,diabetes and cardiovascular diseases due to the presence of phenolic compounds.HPTLC finger print of Evolvulus alsinoides may be useful in the differentiation of the species from adulterants and act as a biochemical marker for this medicinally important plant in the pharmaceutical industry and plant systematic studies.

Atomic layer deposition of thin films:from a chemistry perspective

Atomic layer deposition(ALD)has become an indispensable thin-film technology in the contemporary microelectronics industry.The unique self-limited layer-by-layer growth feature of ALD has outstood this technology to deposit highly uniform conformal pinhole-free thin films with angstrom-level thickness control,particularly on 3D topologies.Over the years,the ALD technology has enabled not only the successful downscaling of the microelectronic devices but also numerous novel 3D device structures.As ALD is essentially a variant of chemical vapor deposition,a comprehensive understanding of the involved chemistry is of crucial importance to further develop and utilize this technology.To this end,we,in this review,focus on the surface chemistry and precursor chemistry aspects of ALD.We first review the surface chemistry of the gas–solid ALD reactions and elaborately discuss the associated mechanisms for the film growth;then,we review the ALD precursor chemistry by comparatively discussing the precursors that have been commonly used in the ALD processes;and finally,we selectively present a few newly-emerged applications of ALD in microelectronics,followed by our perspective on the future of the ALD technology.

Comparison of liquid-liquid extraction-thin layer chromatography with solid-phase extraction-high-performance thin layer chromatography in detection of urinary morphine

Liquid-liquid extraction-thin layer chromatography （LLE-TLC） has been a common and routine combined method for detection of drugs in biological materials. Solid-phase extraction （SPE） is gradually replacing the tra- ditional LLE method. High performance thin layer chromatography （HPTLC） has several advantages over TLC. The present work studied the higher efficiency of a new SPE-HPTLC method over that of a routine LLE-TLC method, in extraction and detection of urinary morphine. Fifty-eight urine samples, primarily identified as mor- phine-positive samples by a strip test, ＇were re-screened by LLE-TLC and SPE-HPTLC. The results of LLE-TLC and SPE-HPTLC were then compared with each other. The results showed that the SPE-HPTLC detected 74% of total samples as morphine-positive samples whereas the LLE-TLC detected 48% of the same samples. We further discussed the effect of codeine abuse on TLC analysis of urinary morphine. Regarding the importance of morphine detection in urine, the present combined SPE-HPTLC method is suggested as a replacement method for detection of urinary morphine by many reference laboratories.

Evaluation of quantitative variation of secondary metabolites in Bergenia ciliata(Haw.)using high performance thin layer chromatography

Dear Editor： Therapeutically active metabolite contents in a med- icinal plant vary in nature, which may impact on its therapeutic efficacy. Bergenia （Saxifragaceae） is an evergreen perennial herb widely distributed in Central and East Asia with about 30 species reported worldwide. It grows at a range of altitudes from the Khasia hills at 400 feet to the temperate Himalayas from Kashmir to Bhutan at 7,000-10,000 feet. Its distribution over a wide range of altitudinal zones makes it a good candidate for studying variations in its metabolic profiles under different climatic conditions. Bergenin （C-glycoside of 4-O-methyl gallic acid） has been identified as a potent active secondary metabolite in Bergenia and other therapeutically active constituents including, among others, gallic acid （3,4,5 trihydroxybenzoic acid）, （＋） catechin, and gallicin （Fig. 1）.

Self-supported ultrathin NiCo layered double hydroxides nanosheets electrode for efficient electrosynthesis of formate

Electrochemical CO_(2)reduction into energy-carrying compounds,such as formate,is of great importance for carbon neutrality,which however suffers from high electrical energy input and liquid products crossover.Herein,we fabricated self-supported ultrathin NiCo layered double hydroxides(LDHs)electrodes as anode for methanol electrooxidation to achieve a high formate production rate(5.89 mmol h^(-1)cm^(-2))coupled with CO_(2)electro-reduction at the cathode.A total formate faradic efficiency of both anode for methanol oxidation and cathode for CO_(2)reduction can reach up to 188%driven by a low cell potential of only 2.06 V at 100 mA cm^(-2)in membrane-electrode assembly(MEA).Physical characterizations demonstrated that Ni^(3+)species,formed on the electrochemical oxidation of Ni-containing hydroxide,acted as catalytically active species for the oxidation of methanol to formate.Furthermore,DFT calculations revealed that ultrathin LDHs were beneficial for the formation of Ni^(3+)in hydroxides and introducing oxygen vacancy in NiCo-LDH could decrease the energy barrier of the rate-determining step for methanol oxidation.This work presents a promising approach for fabricating advanced electrodes towards electrocatalytic reactions.

Atomic layer deposition for nanoscale oxide semiconductor thin film transistors:review and outlook

Since the first report of amorphous In–Ga–Zn–O based thin film transistors,interest in oxide semiconductors has grown.They offer high mobility,low off-current,low process temperature,and wide flexibility for compositions and processes.Unfortunately,depositing oxide semiconductors using conventional processes like physical vapor deposition leads to problematic issues,especially for high-resolution displays and highly integrated memory devices.Conventional approaches have limited process flexibility and poor conformality on structured surfaces.Atomic layer deposition(ALD)is an advanced technique which can provide conformal,thickness-controlled,and high-quality thin film deposition.Accordingly,studies on ALD based oxide semiconductors have dramatically increased recently.Even so,the relationships between the film properties of ALD-oxide semiconductors and the main variables associated with deposition are still poorly understood,as are many issues related to applications.In this review,to introduce ALD-oxide semiconductors,we provide:(a)a brief summary of the history and importance of ALD-based oxide semiconductors in industry,(b)a discussion of the benefits of ALD for oxide semiconductor deposition(in-situ composition control in vertical distribution/vertical structure engineering/chemical reaction and film properties/insulator and interface engineering),and(c)an explanation of the challenging issues of scaling oxide semiconductors and ALD for industrial applications.This review provides valuable perspectives for researchers who have interest in semiconductor materials and electronic device applications,and the reasons ALD is important to applications of oxide semiconductors.

Layered Structural PBAT Composite Foams for Efficient Electromagnetic Interference Shielding

The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

Multilayered PdTe_(2)/thin Si heterostructures as self-powered flexible photodetectors with heart rate monitoring ability

Two-dimensional layered material/semiconductor heterostructures have emerged as a category of fascinating architectures for developing highly efficient and low-cost photodetection devices.Herein,we present the construction of a highly efficient flexible light detector operating in the visible-near infrared wavelength regime by integrating a PdTe2 multilayer on a thin Si film.A representative device achieves a good photoresponse performance at zero bias including a sizeable current on/off ratio exceeding 105,a decent responsivity of~343 mA/W,a respectable specific detectivity of~2.56×10^(12)Jones,and a rapid response time of 4.5/379μs,under 730 nm light irradiation.The detector also displays an outstanding long-term air stability and operational durability.In addition,thanks to the excellent flexibility,the device can retain its prominent photodetection performance at various bending radii of curvature and upon hundreds of bending tests.Furthermore,the large responsivity and rapid response speed endow the photodetector with the ability to accurately probe heart rate,suggesting a possible application in the area of flexible and wearable health monitoring.

Identification of Ethnic Medicine Polygonum capitatum by Thin Layer Chromatography

[Objectives]To establish a thin-layer chromatography identification method for the ethnic medicinal materials of Polygonum capitatum.[Methods]The thin layer chromatography(TLC)method was used to identify materials.[Results]The TLC identification showed that in the chromatogram of the test sample,there were spots of the same color in the corresponding position of the chromatogram of the reference medicinal material,and the reproducibility was good.[Conclusions]The TLC identification and the determination results of the inspection items can provide a basis for the quality control of the medicinal materials of P.capitatum.

Application of Thin Layer Chromatography in Preparation of Drug Containing Serum of Eucalyptus Oil

[Objectives] To explore whether the thin layer chromatography( TLC) can be used to guide the preparation of drug containing serum of eucalyptus oil. [Methods]Eucalyptus oil samples with different dilution ratio were detected by TLC. Eucalyptus oil was intragastrically administered to mice,serum samples of different eucalyptus oil doses,different intragastric administration methods and different blood sampling times were collected. The above samples were detected by TLC,and the above results were verified by gas chromatography. [Results] TLC can detect concentration difference of eucalyptus oil samples with different dilution ratio. TLC can provide qualitative and semi-quantitative detection of eucalyptus oil in serum. High,medium and low dose of eucalyptus oil in serum had different effects on the growth of MCF-7 cells in the SD rats( P < 0. 05). [Conclusions] TLC can be used to guide the preparation of drug containing serum of eucalyptus oil.

Unveiling localized electronic properties of ReS2 thin layers at nanoscale using Kelvin force probe microscopy combined with tip-enhanced Raman spectroscopy

Electronic properties of two-dimensional(2D) materials can be strongly modulated by localized strain. The typical spatial resolution of conventional Kelvin probe force microscopy(KPFM) is usually limited in a few hundreds of nanometers, and it is difficult to characterize localized electronic properties of 2D materials at nanoscales. Herein, tip-enhanced Raman spectroscopy(TERS) is proposed to combine with KPFM to break this restriction. TERS scan is conducted on ReS2bubbles deposited on a rough Au thin film to obtain strain distribution by using the Raman peak shift. The localized contact potential difference(CPD) is inversely calculated with a higher spatial resolution by using strain measured by TERS and CPD-strain working curve obtained using conventional KPFM and atomic force microscopy. This method enhances the spatial resolution of CPD measurements and can be potentially used to characterize localized electronic properties of 2D materials.

DETERMINING THE CONTENT OF JASMINODIN IN MEI RONG CAPSULE WITH THIN LAYER CHROMATOGRAPHY

Objective Jasminodin in Mei Rong capsule was determined by the method or thin layer chromatog- raphy. Mothods The sample Jasminodin was extracted with methanol and then the extract was chromatographed on silica gel GF254 plate with chloroform-methanol-water(10:3:1) as mobile phase and the chromatograms were scanned by using Shimadzu CS-930 dual wavelength TLCS in zegzag scanning mode at λ_s 370nm and λR 250nm. Results Callbration graph was rectilinear between 2.7μg^16.2μg per spot for the jasminodin. Conclusion Satisfa- tory results were obtained with the average recovery ratio of 99.76%,RSD 2.27%.

Study of Cuscuta chinensis Lam. in Nuhuang Fuzheng Oral Liquid by Thin Layer Chromatography

[Objectives] To better control the quality of Nuhuang Fuzheng Oral Liquid and study the main component Cuscuta chinensis Lam.by Thin Layer Chromatography. [Methods] Through changing the treatment methods of the test sample solution,proportion of the developing solvent and sample application volume,taking the spot resolution,definition,and Rf value,optimal Thin Layer Chromatography conditions were screened for Cuscuta chinensis Lam. [Results] After the test sample solution passing the neutral alumina column,it was extracted two times using the ethyl acetate. Methanol was added to dissolve. Benzene-ethyl acetate-formic acid( 5∶5∶2.5) was used as developing solvent.And ammonia fumigation was carried out to develop color. In the thin layer chromatograph obtained through these conditions,Nuhuang Fuzheng Oral Liquid test sample solution showed the same stripe in the same position of the control drug chromatogram and there was no obvious tailing phenomenon and the spot was clear. [Conclusions] The thin layer chromatography identification conditions can be used as the method for quality control of Cuscuta chinensis Lam. in Nuhuang Fuzheng Oral Liquid.