Electrochemical Behavior and Determination of Trifluoperazine at Decanethiol Self-Assembled Monolayer Modified Gold Electrodes

The electrochemical behavior of trifluoperazine at decanethiol self-assembledmonolayer (SAM) modified gold electrodes (i. e. C_(10) H_(21) SH/Au) has been studied,Trifluoperazine can effectively accumulate on C_(10) H_(21) SH/Au electrodes and generate asensitive anodic peak at about 0.63 V (vs. SCE) in 0.05 mol/L pH 9.4 Na_2 B_4 O_7 buffer solution.Under the selected conditions, the anodic peak current was linear to trifluoperazine concentrationin the range of 5.0 X 10^(-7)-3.O X 10^(-3) mol/Lwith correlation coefficient of 0.997, thedetection limit was 3.0 X 10^(-5) mol/L. This method was applied to the determination oftrifluoperazine in drug samples and the recovery was 97.3%-104.0% It was found that sodium dodecylsulfate (SDS) could make the anodic peak current increase. In the presence of SDS, the peak at about0.63 V turned into two peaks, resulting from the change of the electrochemical mechanism.

Electrodeposited Cobalt-Iron Alloy Thin-Film for Potentiometric Hydrogen Phosphate-Ion Sensor

A cobalt-iron alloy thin-film electrode-based electrochemical hydrogen-phosphate-ion sensor was prepared by electrodepositing on an Au-coated Al2O3 substrate from an aqueous solution of metal-salts. The use of a cobalt-iron alloy electrode greatly improved the hydrogen-ion sensor response performance, i.e., the sensor worked stably for more than 7 weeks and showed a quick response time of several seconds. Among the cobalt and iron alloy systems tested, the electrodeposited Co58Fe42 thin-film electrode showed the best EMF response characteristics, i.e., the sensor exhibited a linear potentiometric response to hydrogen-phosphate ion at the concentration range between 1.0 × 10–5 and 1.0 × 10–2 M with the slope of –43 mV/decade at pH 5.0 and at 30℃. A sensing mechanism of the Co-based potentiometric hydrogen-phosphate ion sensor was proposed on the basis of results of instrumental analysis.

Two Types of Potential Oscillation During the Reduction of Dichromate on Gold Electrode in H2SO4 Solution

潜在的摆动的二种不同类型在一个答案在一个金电极上在重铬酸盐减小期间第一次被识别了冲淡硫磺的酸。一个人由于形成在氢进化前发生，使钝化的溶解低原子价的铬氧化物拍摄，并且其它产生伴随周期的氢进化，从联合有散开、对流的集体运输的电气化学的反应。更有趣地，摆动的这二种类型在周期的 voltammogram (CV ) 对应于二个十字路口环。有穿过的 CV 的摆动的如此的一种关系将提供一个新方法系统地并且很快发现电气化学的摆动的系统。

Radio-frequency magnetron sputtered thin-film La_(0.5)Sr_(0.5)Co_(0.95)Nb_(0.05)O_(3-δ) perovskite electrodes for intermediate temperature symmetric solid oxide fuel cell(IT-SSOFC)

The present work explores the application of La_(0.5)Sr_(0.5)Co_(0.95)Nb_(0.05)O_(3-δ)(LSCNO)perovskite as electrode material for the symmetric solid oxide fuel cell.Symmetric solid oxide fuel cells of thin-film LSCNO electrodes were prepared to study the oxygen reduction reaction at intermediate temperature.The Rietveld refinement of syn-thesized material shows a hexagonal structure with the R-3c space group of the prepared perovskite material.Lattice parameter and fractional coordinates were utilized to calculate the oxygen ion diffusion coefficient for molecular dynamic simulation.At 973 K,the oxygen ion diffusion of LSCNO was 1.407×10^(-8)cm^(2)s^(-1) higher by order of one magnitude than that of the La_(0.5)Sr_(0.5)Co_(0.95)Nb_(0.05)O_(3-δ)(7.751×10^(-9)cm^(2)^(-1)).The results suggest that the Nb doping provide the structural stability which improves oxygen anion diffusion.The enhanced structural stability was analysed by the thermal expansion coefficient calculated experimentally and from molecular dynamics simulations.Furthermore,the density functional theory calculation revealed the role of Nb dopant for oxygen vacancy formation energy at Sr-0 and La-O planes is lower than the undoped structure.To understand the rate-limiting process for sluggish oxygen diffusion kinetics,80 nm and 40 nm thin films were fabricated using radio frequency magnetron sputtering on gadolinium doped ceria electrolyte substrate.The impedance was observed to increase with an increasing thickness,suggesting the bulk diffusion as a rate-limiting step for oxygen ion diffu-sion.The electrochemical performance was analysed for the thin-flm symmetric solid oxide fuel cell,which achieved a peak power density of 390 mW cm^(-2) at 1.02 V in the presence of H_(2) fuel on the anode side and air on the cathode side.

The Study of Electrochemical Behavior of Dopamine at Nano-gold Modified Carbon Fiber Electrode

The electrochemical behaviors (cyclic voltammetry, CV and different pulse voltammetry, DPV) of dopamine (DA) were studied in this paper. The result indicated that the oxidation of dopamine was controlled by diffusion and adsorption simultaneously at nano-gold (NG) modified carbon fiber electrode (CFE). This modified electrode can separate the peak potentials of dopamine and ascorbic acid (AA). The peak current of DA in DPV curve was found to be linearly proportional to the concentration of DA at range of 2.0?0-6～1.5?0-5mol/L and 1.0?0-5～5.0?0-4mol/L, respectively.

Cyclic Voltammetry Determination of Epinephrine with a Nano-gold Modified Glassy Carbon Electrode in the Presence of High Concentration Ascorbic Acid

Nano-gold (NG) modified glassy carbon electrodes (GCEs) were used for determination of epinephrine (EP) in the presence of high concentration ascorbic acid (AA) by cyclic voltammetry (CV). This modified electrode can not only catalytically oxidize EP and AA, but also separate the catalytic peak potentials of EP and AA by about 183.5 mV. In pH = 7.0 ogisogate byffer solution, the linear range of epinephrine was 5 106 ~ 1 ?10-4 mol/L.

Anion Adsorption on an Au Colloid Monolayer Based Cysteamine-Modified Gold Electrode

Anion adsorption behavior on Au colloid surface was investigated in virture of depositing monolayers of Au colloid on the self-assembled monolayers of cysteamine on a gold electrode. Po- tential-dependent anion adsorption-desorption waves via the nonfaradaic current were obtained by means of cyclic voltammetry at Au coltoid-modified gold electrodes in the potential range of -2 00-600 mV. The adsorption sequence in the order of adsorption peak potentials (Epa) is OH- >citrate3 ->H2PO4- >Cl->SO42->ClO4->NO3-. Among them, citrate3- exhibited an en- tirely irreversible adsorption. A rise in temperature can increase the rates of adsorption-desorp- tion and improve the reversibility of the adsorption-desorption of Cl-, SO42-, ClO4-, NO3- and H2PO-4. The adsorption peak potentials shifted more negatively for Ca. 63 mV as the anion con- centrations were increased by a decade factor. The change of pH from 7 to 1 slightly affected the adsorption peak potentials of Cl- and NO3-. Au colloids with a smaller size (16 nm) gave rise to a better reversibility of the adsorption-desorption process and lower adsorption currents. The ex- perimental results of citrate ions adsorption on Au colloid surface show that Au colloids with a smaller size prepared by sodium citrate method exhibited a higher stability in the solution in com- parison to those with larger sizes because of its higher ratio of charge/mass. In other words, the smaller gold nanoparticles are covered with citrate ions monolayer that can also be formed at larg- er gold nanoparticles by means of electrochemical scan.

Determination of ppt Level Chromium(VI) Using the Gold Nano-Flakes Electrodeposited on Platinum Rotating Disk Electrode and Modified with 4-Thiopyridinium

The nano-gold layer formed on the platinum rotating disk electrode (nano-Au/Pt-RD) inherited the catalytic property for Cr(VI) reduction from platinum surface and owned the good features of nano-gold such as insensitivity with hydrogen ion, high surface area, augmenting diffusion of Cr(VI) and ability for self-assembling with 4-pyridine-ethanethiol (PET) through Au←S linkages, to form PET/nano-Au/Pt-RD electrode capable of accumulating Cr(VI) from sample. The obtained PET/ nano-Au/Pt-RD electrode showed an extreme sensitivity to Cr(VI). By using this electrode, 1.09 ng·L﹣1 was the detection limit of differential pulse adsorptive cathodic stripping voltammetry for Cr(VI) with the accumulation time of only 2 min. Moreover, this electrode was reproducible with 3.5% RSD for 30 times of Cr(VI) accumulating and stripping. In addition, this electrode was also selective for Cr(VI) determination, which was not almost interfered by other inorganic ions.

Direct Electrochemical Evidence of the Dissociation and Adsorption Behavior of Acetonitrile at Gold Electrodes by Ultrafast Voltammetry

Ultrafast cyclic voltammetry was used to study the redox behavior of a gold electrode in acetonitrile. The direct electrochemical evidence of the dissociation and adsorption behavior of acetonitrile at gold electrodes was found. It could be stated that two consecutive redox paths are involved, each with a special adsorption state acting as the reaction intermediate. The mean value, obtained of the electron-transfer rate constant of the second path, was 1.3 × 10^5 s^-1 with a standard deviation of 0.24 × 10^5 s^-1.

Voltammetric determination of uric acid by using gold nanotubule electrode

Gold nanotubule membranes were prepared by using electroless deposition of gold within the pores and surfaces of polycarbonate track-etched membranes. And the gold nanotubule membrane was used as an electrode for determination of uric acid in urine samples for the first time. In Britton–Robinson buffer of pH 4.56, uric acid exhibited well-defined differential pulse voltammograms. And the interference between coexistent ascorbic acid and uric acid was overcome owing to the attractive ability of the gold nanotubule electrode to yield a large anodic peak difference ca. 0.404 V (vs. SCE). The proposed method was then applied to the determination of uric acid in urine without any pretreatment.

Gold Nanoparticle-based Layer-by-Layer Enhancement of DNA Hybridization Electrochemical Signal at Carbon Nanotube Modified Carbon Paste Electrode

Colloid gold nanoparticle-based layer-by-layer amplification approach was applied to enhance the electrochemical detection sensitivity of DNA hybridization at carbon nanotube modified carbon paste electrodes （CNTPEs）. Streptavidin was immobilized onto the surface of CNTPEs, and the conjugation of biotin labeled target oligonucle,otides to the above immobilized streptavidin was performed, followed by the hybridization of target oligonucleotides with the gold nanoparticle-labeled DNA probe and then the layer-by-layer enhanced connection of gold nanoparticles, on which oligonucleotides complementary to the DNA probe were attached, to the hybridization system. The differential pulse voltammetry （DPV） signal of total gold nanoparticles was monitored. It was found that the layer-by-layer colloidal gold DPV detection enhanced the sensitivity by about one order of magnitude compared with that of one-layer detection. One-base mismatched DNA and complementary DNA could be distinguished clearly.

Studies on the Gold-Coated Electrode with Grid

Introduction Thin-layer spectroelectrochemical method has many unique advantages, therefore this method has been widely applied and developed. Recently light transparent thinlayer spectroelectrochemical cells with various types of structures have been reported at home and abroad with gold or platinum minigrids as the working electrode in most of

Preparation and Characterization of Gold Thin Film Electrode Modified by Microbe

A novel method based on microbe modification has been employed to prepare gold thin film electrode. The preparation method is simple and the electrode obtained is stable and very sensitive in determining heavy metal ions. The quantitation limit of Cu2+ is 0.05 ng/mL.

Electrochemical Determination of Melamine on Static Mercury Drop Electrode and on Gold Nano Particle Modified Carbon Paste Electrode

An electrochemical method was developed for the determination of melamine (2,4,6 triamino- 1,3,5-triazine) on static mercury drop electrode (SMDE) and on gold nano particle modified carbon paste electrode. Interaction of melamine with Cu2﹢ ion was investigated and the decrease of Cu stripping peak was measured for the determination of melamine using SMDE. Oxidation property of melamine was improved using gold nano particle modified carbon paste electrode. Direct determination of melamine was proposed from the oxidation peak with three sigma detection limit of 0.43 μML﹣1. Recovery in milk powder sample has shown good recovery of melamine using the modified carbon paste electrode.

ELECTROCHEMISTRY OF OI-μ-OXO-DIMANGANESE COMPLEX AT THIOURACIL MODIFIED GOLD ELECTRODE

The electrochemistry of di-μ-oxo-dimanganese complex was investigated. It was found that no redox peak was observed in the cyclic voltammogram (CV) of the complex at the bare gold electrode, but at thiouracil-modified gold electrode, a pair of redox peaks were observed showing that thiouracil can promote the proton-coupled electron transfer reaction of the complex.

Gold Nanoparticles/Thermochromic Composite Film on Screen-Printed Electrodes for Simultaneous Detection of Protein and Temperature

In this study, gold nanoparticles and thermochromic composite films modified screen-printed carbon electrodes (TM-AuNPsSPCEs) were developed as a platform for the simultaneous detection of protein and temperature. The TM-AuNPs composited film had better sensitivity resulting from the gold nanoparticles amplification effect. A phase transition model analysis of TM-AuNPs films found that the TM-AuNPs films had three-phase transition intervals (<45℃, 45℃ to 80℃ and >80℃) which accommodated the temperature requirements for protein denaturation. When used to detect different concentrations of haemoglobin (Hb) solution, the TM-AuNPs modified SPCEs had a better sensitivity in detecting the different concentrations in comparison to TM and AuNP modified SPCEs which showed no clear sensitivity towards the different Hb concentrations. The dual detection and excellent sensitivity show a good application prospect for the study of the TM-AuNPs composite film.

Electrochemical Investigation of P-Tert-Butylcalix[6]Arene Modified Gold Electrode for Ionic Detection

The aim of this work was to study the electrochemical behavior of gold electrode which was modified with p-tert-butylcalix[6]arene membrane and this in the presence of different nickel ions based concentrations in order to form a nickel electrochemical sensor. For that, impedance-spec- troscopy characteristics have been investigated. The obtained results were then modeled by appropriate equivalent circuit aiming at elucidating the electrical properties of the modified gold transducer. A correlation between the present impedimetric results and previous potentiometric ones was achieved traducing then a fast ionic transfer.

PROMOTION EFFECT OF PYRIDINE FOR THE DIRECT ELECTROCHEMISTRY OF CYTOCHROME C AT GOLD ELECTRODES

It was found for the first time that the compounds with only one functional group, such as pyridine, can show the promotion effect for the electrochemical reaction of cytochrome C at gold electrodes.

Texture ZnO Thin-Films and their Application as Front Electrode in Solar Cells

In this paper, three kinds of textured ZnO thin-films (the first kind has the textured structure with both columnar and polygon, the second posses pyramid-like textured structure only, and the third has the textured structure with both crater-like and pyramid-like), were prepared by three kinds of methods, and the application of these ZnO thin-films as a front electrode in solar cell was studied, respectively. In the first method with negative bias voltage and appropriate sputtering parameters, the textured structure with columnar and polygon on the surface of ZnO thin-film are both existence for the sample prepared by direct magnetron sputtering. Using as a front electrode in solar cell, the photoelectric conversion efficiency Eff of 7.00% was obtained. The second method is that by sputtering on the ZnO:Al self-supporting substrate, and the distribution of pyramid-like was gained. Moreover, the higher (8.25%) photoelectric conversion efficiency of solar cell was got. The last method is that by acid-etching the as-deposited ZnO thin-film which possesses mainly both columnar and polygon structure, and the textured ZnO thin-film with both crater-like and pyramid-like structure was obtained, and the photoelectric conversion efficiency of solar cell is 7.10% when using it as front electrode. These results show that the textured ZnO thin-film prepared on self-supporting substrate is more suitable for using as a front electrode in amorphous silicon cells.

A Gold Electrode QCM Study on the Self-Assembling Process of Thioglycollic Acid in Aqueous Solution

In this letter, the self-assembling process of thioglycollic acid on gold in aqueous solutions was studied by QCM technique. Frequency information suggests bilayer or multilayer adsorbate formation in 0.5 mol/L HCl solution but only monolayer one in 0.5 mol/L KOH solution. This phenomenon is explained by hydrogen bond effect.