TLC Identification and Extraction Process of Rubiasin-1-methyl Ether from Yao Medicine Chuanlianzhu

[Objectives]To establish a thin-layer chromatography(TLC)method for the determination of rubiadin-1-methyl ether in Yao Medicine Chuanlianzhu(Damnacanthus giganteus).[Methods]A silica gel G thin-layer plate was adopted for TLC.Petroleum ether(60-90℃)-chloroform-methanol-water(7:15:3:1)was used as the developing solvent and inspected under ultraviolet lamp(365 nm).The content was determined by Inertsil ODS-3 C 18 column(4.60 mm×250 mm,5μm),mobile phase:acetonitrile-0.2%phosphoric acid gradient elution,detection wavelength 277 nm,flow rate 1.0 mL/min,column temperature 30℃,injection volume 10μL.[Results]The spots of 10 Chuanlianzhu samples from different origins showed the same color at the same position as the control,and the spots were clear and specific.The injection volume of rubiadin-1-methyl ether showed a good linear relationship in the range of 2.90-145μg(R=0.9996).The average recovery rate of rubiadin-1-methyl ether in the low,medium and high dose groups of Yao Medicine Chuanlianzhu was 98.72%,and RSD=1.78%.[Conclusions]This method can effectively identify Yao Medicine Chuanlianzhu medicinal materials and accurately determine the content of rubiadin-1-methyl ether in the medicinal materials.It provides a scientific basis for the development and utilization of Yao Medicine Chuanlianzhu medicinal resources.

ANALYSIS OF HUMAN PLACENTA BY ^(31)P NUCLEAR MAGNETIC RESONANCE AND THIN-LAYER CHROMATOGRAPHY SCANNING COMBINED WITH THE CORRECTIVE METHOD OF ABSORBANCE PROPORTIONAL COEFFICIENT

Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.

Methods for in vitro evaluating antimicrobial activity： A review

In recent years, there has been a growing interest in researching and developing new antimicrobial agents from various sources to combat microbial resistance. Therefore, a greater attention has been paid to antimicrobial activity screening and evaluating methods. Several bioassays such as disk-diffusion, well diffusion and broth or agar dilution are well known and commonly used, but others such as flow cy- tofluorometric and bioluminescent methods are not widely used because they require specified equip- ment and further evaluation for reproducibility and standardization, even if they can provide rapid re- sults of the antimicrobial agent＇s effects and a better understanding of their impact on the viability and cell damage inflicted to the tested microorganism. In this review article, an exhaustive list of in vitro antimicrobial susceptibility testing methods and detailed information on their advantages and limita- tions are reported.

Separation of liquefied product of Salix psammophila by column chromatography and structure analysis of its components

The liquefied product of Salixpsammophila wood was separated by thin-layer chromatography （TLC） and column chromatography, and its structure was identified by nuclear magnetic resonance （NMR） spectra in our study. The separation result indicates that the sample of liquefied S. psammophila contained at least two categories of components. The structure of the main components was guaiacyl C-1, C-2 of the hydroxyphenyl propane, i.e., the aromatic nucleus protons of lignin. Degradation and polycondensation reactions occurred when the S. psammophila wood was liquefied in phenol. Polycondensation reactions occurred among the depolymerization products from cellulose, the aromatic depolymerization products from lignin and the products of the displacement reactions between phenoxide ion and cellulose.

Quality Standard of Zijinbiao

[Objectives]To establish the quality standard for Zijinbiao.[Methods]Microscopic identification,physical and chemical identification,and thin-layer chromatography(TLC)were used to qualitatively identify Zijinbiao.The moisture,total ash,acid-insoluble ash,and alcohol-soluble extract content were determined.The content of Plumbagin was determined by high performance liquid chromatography(HPLC).[Results]Microscopic identification,physical and chemical identification and thin layer identification features were remarkable.The moisture,total ash,acid-insoluble ash,and extract content of the 15 batches of samples were 7.49%-11.84%,2.43%-5.81%,0.59%-3.18%and 13.80%-20.45%,respectively.The linear equation of Plumbagin was Y=38094X,R^(2)=0.9996.Plumbagin had a good linear relationship in the range of 0.01-0.53 mg/mL.[Conclusions]This method is specific and reproducible,and can be used for quality control of Zijinbiao.