The mold filling process of titanium alloy in a thin-walled cylinder cavity under vertical centrifugal casting process was studied by means of the hydraulic simulation experiments. Results show that the filling mode o...The mold filling process of titanium alloy in a thin-walled cylinder cavity under vertical centrifugal casting process was studied by means of the hydraulic simulation experiments. Results show that the filling mode of the melt in the cylinder cavity varies with casting wall-thickness. When the casting wall-thickness is less than or equal to the thickness of the first layer during the filling process, the melts fill the cavity from the bottom to the top.When the casting wall-thickness is greater than the thickness of the first layer during the filling process, the melts first fill the largest radius parts of the cavity with a certain thickness of the first layer from the bottom to the top of the cavity, and then they fill the cavity from the larger radius part to the smaller radius part. The melt filling ability increases with the increment of the mold rotational speed and the pouring temperature. In another aspect, the melt filling ability rises with the decrement of the melt viscosity, and the melt with the better filling ability is prone to fill the cylinder cavity layer by layer.展开更多
The investigation of supporting pressure is of great significance to the design of underground structures.Based on the kinematical approach of limit analysis,an improved failure mechanism is proposed,and the supportin...The investigation of supporting pressure is of great significance to the design of underground structures.Based on the kinematical approach of limit analysis,an improved failure mechanism is proposed,and the supporting pressure is investigated for deep buried cavity.Three failure mechanisms are first introduced according to the existing failure mechanisms of geotechnical structures of limit analysis.A comparison with respect to the optimal failure mechanisms and the upper bound solutions provided among these three mechanisms are then conducted in an attempt to obtain the improved failure mechanism.The results provided by the improved failure mechanism are in good agreement with those by the existing method,the numerical solution and field monitoring,which demonstrates that the proposed failure mechanism is effective for the upper bound analysis of supporting pressure.展开更多
The strips U deep drawing experiments were carried out to study the effect of die cavity dimension with an extension machine manufactured by SANS company. The effects of parameters were analyzed in deep drawing proces...The strips U deep drawing experiments were carried out to study the effect of die cavity dimension with an extension machine manufactured by SANS company. The effects of parameters were analyzed in deep drawing process under different experimental conditions, such as punch load, reduction of thickness, angle of U part and surface quality. The experiment results show that the punch load increases with the decrease of female radius, and larger blank holder force enlarges the range of increasing. With the increasing of blank holder force, the angle of U part increases, and the reduction of foil thickness at the corner becomes larger. Obvious scratch and accumulation at the die cavity corner were observed by SEM. The investigation results indicate that micro U deep drawing of foil is affected by micro die cavity dimension.展开更多
In the case of lid-driven deep cavity flow, the effects of different resolutions of local grid refinement have been studied in the frame of multiple relaxation times (MRT) lattice Boltzmann method (LBM). In all the ca...In the case of lid-driven deep cavity flow, the effects of different resolutions of local grid refinement have been studied in the frame of multiple relaxation times (MRT) lattice Boltzmann method (LBM). In all the cases, the aspect ratio and Reynolds number are set as 1.5 and 3.200, respectively. First, the applied method is validated by comparing it with two reported works, with which agreements are reached. Then, six separate degrees of local grid refinement at the upper left corner, i.e. purely coarse grid, including 1/64, 1/32, 1/16, 1/8, 1/4 refinements of the lattice number in the width direction have been studied in detail. The results give the following indications:① The refinement degrees lower than 1/8 produce similar results;② For single corner refinement, 1/4 refinement is adequate for clearing the noises in the singularity zone to a large extent;③ New noise around the interface between coarse and fine zones are introduced by local grid refinement. Finally, refinement of entire subzone neighboring the lid is examined to avoid introducing new noises and it has been found effective.展开更多
隧道衬砌内部空洞等病害检测已经成为隧道检修人员的主要工作之一。本文提出一种将探地雷达与深度学习相结合的隧道衬砌空洞检测方法,通过雷达探测和仿真模拟,得到大量衬砌雷达图像,并对图像进行标注和制作数据集。基于YOLOv5(You Only ...隧道衬砌内部空洞等病害检测已经成为隧道检修人员的主要工作之一。本文提出一种将探地雷达与深度学习相结合的隧道衬砌空洞检测方法,通过雷达探测和仿真模拟,得到大量衬砌雷达图像,并对图像进行标注和制作数据集。基于YOLOv5(You Only Look Once version 5)目标检测模型,结合数据集目标特征,提出一种检测衬砌空洞的算法,引入特征融合模块提高网络感受野,并采用K-means聚类算法提高检测准确率。通过现场检测,本文的检测方法准确率达到了97.7%,准确可靠,可在工程中进行应用。展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51475120)the Project of Science and Technology of Henan Province of China(2018QNJH25,182102110096)
文摘The mold filling process of titanium alloy in a thin-walled cylinder cavity under vertical centrifugal casting process was studied by means of the hydraulic simulation experiments. Results show that the filling mode of the melt in the cylinder cavity varies with casting wall-thickness. When the casting wall-thickness is less than or equal to the thickness of the first layer during the filling process, the melts fill the cavity from the bottom to the top.When the casting wall-thickness is greater than the thickness of the first layer during the filling process, the melts first fill the largest radius parts of the cavity with a certain thickness of the first layer from the bottom to the top of the cavity, and then they fill the cavity from the larger radius part to the smaller radius part. The melt filling ability increases with the increment of the mold rotational speed and the pouring temperature. In another aspect, the melt filling ability rises with the decrement of the melt viscosity, and the melt with the better filling ability is prone to fill the cylinder cavity layer by layer.
基金Project(51674115)supported by the National Natural Science Foundation of ChinaProject(51434006)supported by the Key Program of the National Natural Science Foundation of ChinaProject(2015JJ4024)supported by the Natural Science Foundation of Hunan Province,China
文摘The investigation of supporting pressure is of great significance to the design of underground structures.Based on the kinematical approach of limit analysis,an improved failure mechanism is proposed,and the supporting pressure is investigated for deep buried cavity.Three failure mechanisms are first introduced according to the existing failure mechanisms of geotechnical structures of limit analysis.A comparison with respect to the optimal failure mechanisms and the upper bound solutions provided among these three mechanisms are then conducted in an attempt to obtain the improved failure mechanism.The results provided by the improved failure mechanism are in good agreement with those by the existing method,the numerical solution and field monitoring,which demonstrates that the proposed failure mechanism is effective for the upper bound analysis of supporting pressure.
基金Projects(50835002 50805035) supported by the National Natural Science Foundation of ChinaProject(2008RFQXG041) supported by the Foundation for Innovation Scholars of Harbin, China
文摘The strips U deep drawing experiments were carried out to study the effect of die cavity dimension with an extension machine manufactured by SANS company. The effects of parameters were analyzed in deep drawing process under different experimental conditions, such as punch load, reduction of thickness, angle of U part and surface quality. The experiment results show that the punch load increases with the decrease of female radius, and larger blank holder force enlarges the range of increasing. With the increasing of blank holder force, the angle of U part increases, and the reduction of foil thickness at the corner becomes larger. Obvious scratch and accumulation at the die cavity corner were observed by SEM. The investigation results indicate that micro U deep drawing of foil is affected by micro die cavity dimension.
基金Supported by Science and Technology Development Planning of Shandong Province,P.R.China(2016GGX104018)
文摘In the case of lid-driven deep cavity flow, the effects of different resolutions of local grid refinement have been studied in the frame of multiple relaxation times (MRT) lattice Boltzmann method (LBM). In all the cases, the aspect ratio and Reynolds number are set as 1.5 and 3.200, respectively. First, the applied method is validated by comparing it with two reported works, with which agreements are reached. Then, six separate degrees of local grid refinement at the upper left corner, i.e. purely coarse grid, including 1/64, 1/32, 1/16, 1/8, 1/4 refinements of the lattice number in the width direction have been studied in detail. The results give the following indications:① The refinement degrees lower than 1/8 produce similar results;② For single corner refinement, 1/4 refinement is adequate for clearing the noises in the singularity zone to a large extent;③ New noise around the interface between coarse and fine zones are introduced by local grid refinement. Finally, refinement of entire subzone neighboring the lid is examined to avoid introducing new noises and it has been found effective.
文摘隧道衬砌内部空洞等病害检测已经成为隧道检修人员的主要工作之一。本文提出一种将探地雷达与深度学习相结合的隧道衬砌空洞检测方法,通过雷达探测和仿真模拟,得到大量衬砌雷达图像,并对图像进行标注和制作数据集。基于YOLOv5(You Only Look Once version 5)目标检测模型,结合数据集目标特征,提出一种检测衬砌空洞的算法,引入特征融合模块提高网络感受野,并采用K-means聚类算法提高检测准确率。通过现场检测,本文的检测方法准确率达到了97.7%,准确可靠,可在工程中进行应用。
