[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant mater...[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant material softened or not was embedded in paraffin according to the paraffin method.Cut the thin paraffin sections from the paraffin block with a sharp two-sided blade under anatomical lens.The thin material sections rolled up when they were cut off.Took the section rolls to a slide,and then heated them to melt the paraffin section roll.When the paraffin melted,the sections of plant material were rolled out.After the common or simplified procedures of staining and mounting,the preparations were finished.When an anatomical digital photograph was processed,copy it into the word file and two copies of the original photograph were obtained.One copy was selected to make it to be a negative photograph,and then press the key ＂Press Screen＂ to copy the screen frame.After it was copied into the word file,cut of the unnecessary parts and other operations were carried out,then processed photograph was obtained.[Results] The anatomical preparation for research was gotten.The analyzed digital photograph of the leaf structure of Salix matsudana var.matsudana f.tortuosa has some a three-dimensional effect,and the different leaf structures and cells,e.g.cuticle,cell wall,protoplast,vein,etc.can be identified easily.[Conclusion]The paraffin method without using the microtome has advantages of low cost and higher efficiency,which could be applied by the beginner or in the time without a microtome to be used.The analysis of the plant anatomical digital photographs can acquire more structural information than the original digital photographs,which shows the potentiality and prospects of the optical information analysis of the microscopic imagery and its digital photograph.展开更多
How to obtain proper prior distribution is one of the most critical problems in Bayesian analysis. In many practical cases, the prior information often comes from different sources, and the prior distribution form cou...How to obtain proper prior distribution is one of the most critical problems in Bayesian analysis. In many practical cases, the prior information often comes from different sources, and the prior distribution form could be easily known in some certain way while the parameters are hard to determine. In this paper, based on the evidence theory, a new method is presented to fuse the information of multiple sources and determine the parameters of the prior distribution when the form is known. By taking the prior distributions which result from the information of multiple sources and converting them into corresponding mass functions which can be combined by Dempster-Shafer (D-S) method, we get the combined mass function and the representative points of the prior distribution. These points are used to fit with the given distribution form to determine the parameters of the prior distribution. And then the fused prior distribution is obtained and Bayesian analysis can be performed. How to convert the prior distributions into mass functions properly and get the representative points of the fused prior distribution is the central question we address in this paper. The simulation example shows that the proposed method is effective.展开更多
This paper proposes a new non-intrusive hybrid interval method using derivative information for the dynamic response analysis of nonlinear systems with uncertain-but- bounded parameters and/or initial conditions. This...This paper proposes a new non-intrusive hybrid interval method using derivative information for the dynamic response analysis of nonlinear systems with uncertain-but- bounded parameters and/or initial conditions. This method provides tighter solution ranges compared to the existing polynomial approximation interval methods. Interval arith- metic using the Chebyshev basis and interval arithmetic using the general form modified affine basis for polynomials are developed to obtain tighter bounds for interval computation. To further reduce the overestimation caused by the ＂wrap- ping effect＂ of interval arithmetic, the derivative information of dynamic responses is used to achieve exact solutions when the dynamic responses are monotonic with respect to all the uncertain variables. Finally, two typical numerical examples with nonlinearity are applied to demonstrate the effective- ness of the proposed hybrid interval method, in particular, its ability to effectively control the overestimation for specific timepoints.展开更多
Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） an...Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） and twostep model updating procedure.Due to the insufficiency and uncertainty of information obtained from measurements,the uncertain problem of damage identification is addressed with interval variables in this paper.Based on the first-order Taylor series expansion,the interval bounds of the elemental stiffness parameters in undamaged and damaged models are estimated,respectively.The possibility of damage existence（PoDE） in elements is proposed as the quantitative measure of structural damage probability,which is more reasonable in the condition of insufficient measurement data.In comparison with the identification method based on a single kind of information,the SMI method will improve the accuracy in damage identification,which reflects the information fusion concept based on the non-probabilistic set.A numerical example is performed to demonstrate the feasibility and effectiveness of the proposed technique.展开更多
The white noise deconvolution or input white noise estimation problem has important applications in oil seismic exploration, communication and signal processing. By the modern time series analysis method, based on the...The white noise deconvolution or input white noise estimation problem has important applications in oil seismic exploration, communication and signal processing. By the modern time series analysis method, based on the autoregressive moving average （ARMA） innovation model, a new information fusion white noise deconvolution estimator is presented for the general multisensor systems with different local dynamic models and correlated noises. It can handle the input white noise fused filtering, prediction and smoothing problems, and it is applicable to systems with colored measurement noises. It is locally optimal, and is globally suboptimal. The accuracy of the fuser is higher than that of each local white noise estimator. In order to compute the optimal weights, the formula computing the local estimation error cross-covariances is given. A Monte Carlo simulation example for the system with Bernoulli-Gaussian input white noise shows the effectiveness and performances.展开更多
White noise deconvolution or input white noise estimation problem has important appli-cation backgrounds in oil seismic exploration,communication and signal processing.By the modern time series analysis method,based o...White noise deconvolution or input white noise estimation problem has important appli-cation backgrounds in oil seismic exploration,communication and signal processing.By the modern time series analysis method,based on the Auto-Regressive Moving Average(ARMA) innovation model,under the linear minimum variance optimal fusion rules,three optimal weighted fusion white noise deconvolution estimators are presented for the multisensor systems with time-delayed measurements and colored measurement noises.They can handle the input white noise fused filtering,prediction and smoothing problems.The accuracy of the fusers is higher than that of each local white noise estimator.In order to compute the optimal weights,the formula of computing the local estimation error cross-covariances is given.A Monte Carlo simulation example for the system with 3 sensors and the Bernoulli-Gaussian input white noise shows their effectiveness and performances.展开更多
In this research we are going to define two new concepts: a) “The Potential of Events” (EP) and b) “The Catholic Information” (CI). The term CI derives from the ancient Greek language and declares all the Catholic...In this research we are going to define two new concepts: a) “The Potential of Events” (EP) and b) “The Catholic Information” (CI). The term CI derives from the ancient Greek language and declares all the Catholic (general) Logical Propositions (<img src="Edit_5f13a4a5-abc6-4bc5-9e4c-4ff981627b2a.png" width="33" height="21" alt="" />) which will true for every element of a set A. We will study the Riemann Hypothesis in two stages: a) By using the EP we will prove that the distribution of events e (even) and o (odd) of Square Free Numbers (SFN) on the axis Ax(N) of naturals is Heads-Tails (H-T) type. b) By using the CI we will explain the way that the distribution of prime numbers can be correlated with the non-trivial zeros of the function <em>ζ</em>(<em>s</em>) of Riemann. The Introduction and the Chapter 2 are necessary for understanding the solution. In the Chapter 3 we will present a simple method of forecasting in many very useful applications (e.g. financial, technological, medical, social, etc) developing a generalization of this new, proven here, theory which we finally apply to the solution of RH. The following Introduction as well the Results with the Discussion at the end shed light about the possibility of the proof of all the above. The article consists of 9 chapters that are numbered by 1, 2, …, 9.展开更多
Considering the shortcoming in source management work for a long time, the CaiHong Group corporation propose the concep of Dynamic Consumption Norm. This has increased the enthusiasm of the workers to economize source...Considering the shortcoming in source management work for a long time, the CaiHong Group corporation propose the concep of Dynamic Consumption Norm. This has increased the enthusiasm of the workers to economize sources and reduce cost. Within a year, the corporation economizes sources for 20 billion yuan and achieves a notable effect in the work of reducing the cost and increasing the economic benefit. In order to assist the implementation of the new method in source management, both the corporation and the Education and Research Center of Plant Engineering in China have developed this 'Source Management And Analysis System '.展开更多
为了提高建筑施工安全风险管理的信息化水平,以建筑施工活动及事故风险类型为研究对象,建立施工安全知识图谱。通过知识图谱改进作业条件危险性评价法(LEC)实现安全风险的定量计算,并基于知识图谱进行风险位置识别和不安全因素分析。研...为了提高建筑施工安全风险管理的信息化水平,以建筑施工活动及事故风险类型为研究对象,建立施工安全知识图谱。通过知识图谱改进作业条件危险性评价法(LEC)实现安全风险的定量计算,并基于知识图谱进行风险位置识别和不安全因素分析。研究提出安全风险虚体实化理念,实现了安全风险信息在数字空间实体化表达;基于建筑信息模型(Building Information Modeling, BIM)和知识图谱技术,建立了建筑施工安全风险信息模型(Building Construction Safety Risk Information Model, BCSRIM)。该模型有效避免了传统LEC法中主观因素产生的影响,实现了建筑施工安全风险定量计算、风险位置识别、风险分析及可视化管理。利用Revit二次开发技术,在Microsoft Visual Studio中使用C#语言连接Neo4j图数据库,完成了基于知识图谱的BCSRIM的开发。试验显示,研究提出的BCSRIM对提高施工现场的管理水平具有较高的实用价值。展开更多
基金Supported by National Natural Science Foundation of China(30770124)~~
文摘[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant material softened or not was embedded in paraffin according to the paraffin method.Cut the thin paraffin sections from the paraffin block with a sharp two-sided blade under anatomical lens.The thin material sections rolled up when they were cut off.Took the section rolls to a slide,and then heated them to melt the paraffin section roll.When the paraffin melted,the sections of plant material were rolled out.After the common or simplified procedures of staining and mounting,the preparations were finished.When an anatomical digital photograph was processed,copy it into the word file and two copies of the original photograph were obtained.One copy was selected to make it to be a negative photograph,and then press the key ＂Press Screen＂ to copy the screen frame.After it was copied into the word file,cut of the unnecessary parts and other operations were carried out,then processed photograph was obtained.[Results] The anatomical preparation for research was gotten.The analyzed digital photograph of the leaf structure of Salix matsudana var.matsudana f.tortuosa has some a three-dimensional effect,and the different leaf structures and cells,e.g.cuticle,cell wall,protoplast,vein,etc.can be identified easily.[Conclusion]The paraffin method without using the microtome has advantages of low cost and higher efficiency,which could be applied by the beginner or in the time without a microtome to be used.The analysis of the plant anatomical digital photographs can acquire more structural information than the original digital photographs,which shows the potentiality and prospects of the optical information analysis of the microscopic imagery and its digital photograph.
文摘How to obtain proper prior distribution is one of the most critical problems in Bayesian analysis. In many practical cases, the prior information often comes from different sources, and the prior distribution form could be easily known in some certain way while the parameters are hard to determine. In this paper, based on the evidence theory, a new method is presented to fuse the information of multiple sources and determine the parameters of the prior distribution when the form is known. By taking the prior distributions which result from the information of multiple sources and converting them into corresponding mass functions which can be combined by Dempster-Shafer (D-S) method, we get the combined mass function and the representative points of the prior distribution. These points are used to fit with the given distribution form to determine the parameters of the prior distribution. And then the fused prior distribution is obtained and Bayesian analysis can be performed. How to convert the prior distributions into mass functions properly and get the representative points of the fused prior distribution is the central question we address in this paper. The simulation example shows that the proposed method is effective.
文摘This paper proposes a new non-intrusive hybrid interval method using derivative information for the dynamic response analysis of nonlinear systems with uncertain-but- bounded parameters and/or initial conditions. This method provides tighter solution ranges compared to the existing polynomial approximation interval methods. Interval arith- metic using the Chebyshev basis and interval arithmetic using the general form modified affine basis for polynomials are developed to obtain tighter bounds for interval computation. To further reduce the overestimation caused by the ＂wrap- ping effect＂ of interval arithmetic, the derivative information of dynamic responses is used to achieve exact solutions when the dynamic responses are monotonic with respect to all the uncertain variables. Finally, two typical numerical examples with nonlinearity are applied to demonstrate the effective- ness of the proposed hybrid interval method, in particular, its ability to effectively control the overestimation for specific timepoints.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education (20091102120023)the Aeronautical Science Foundation of China (2012ZA51010)+1 种基金the National Natural Science Foundation of China (11002013)Defense Industrial Technology Development Program (A2120110001 and B2120110011)
文摘Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） and twostep model updating procedure.Due to the insufficiency and uncertainty of information obtained from measurements,the uncertain problem of damage identification is addressed with interval variables in this paper.Based on the first-order Taylor series expansion,the interval bounds of the elemental stiffness parameters in undamaged and damaged models are estimated,respectively.The possibility of damage existence（PoDE） in elements is proposed as the quantitative measure of structural damage probability,which is more reasonable in the condition of insufficient measurement data.In comparison with the identification method based on a single kind of information,the SMI method will improve the accuracy in damage identification,which reflects the information fusion concept based on the non-probabilistic set.A numerical example is performed to demonstrate the feasibility and effectiveness of the proposed technique.
基金supported by the National Natural Science Foundation of China (No.60874063)Science and Technology Research Foudation of Heilongjiang Education Department (No.11523037)and Automatic Control Key Laboratory of Heilongjiang University
文摘The white noise deconvolution or input white noise estimation problem has important applications in oil seismic exploration, communication and signal processing. By the modern time series analysis method, based on the autoregressive moving average （ARMA） innovation model, a new information fusion white noise deconvolution estimator is presented for the general multisensor systems with different local dynamic models and correlated noises. It can handle the input white noise fused filtering, prediction and smoothing problems, and it is applicable to systems with colored measurement noises. It is locally optimal, and is globally suboptimal. The accuracy of the fuser is higher than that of each local white noise estimator. In order to compute the optimal weights, the formula computing the local estimation error cross-covariances is given. A Monte Carlo simulation example for the system with Bernoulli-Gaussian input white noise shows the effectiveness and performances.
基金Supported by the National Natural Science Foundation of China (No.60874063)Science and Technology Re-search Foundation of Heilongjiang Education Department (No.11523037)
文摘White noise deconvolution or input white noise estimation problem has important appli-cation backgrounds in oil seismic exploration,communication and signal processing.By the modern time series analysis method,based on the Auto-Regressive Moving Average(ARMA) innovation model,under the linear minimum variance optimal fusion rules,three optimal weighted fusion white noise deconvolution estimators are presented for the multisensor systems with time-delayed measurements and colored measurement noises.They can handle the input white noise fused filtering,prediction and smoothing problems.The accuracy of the fusers is higher than that of each local white noise estimator.In order to compute the optimal weights,the formula of computing the local estimation error cross-covariances is given.A Monte Carlo simulation example for the system with 3 sensors and the Bernoulli-Gaussian input white noise shows their effectiveness and performances.
文摘In this research we are going to define two new concepts: a) “The Potential of Events” (EP) and b) “The Catholic Information” (CI). The term CI derives from the ancient Greek language and declares all the Catholic (general) Logical Propositions (<img src="Edit_5f13a4a5-abc6-4bc5-9e4c-4ff981627b2a.png" width="33" height="21" alt="" />) which will true for every element of a set A. We will study the Riemann Hypothesis in two stages: a) By using the EP we will prove that the distribution of events e (even) and o (odd) of Square Free Numbers (SFN) on the axis Ax(N) of naturals is Heads-Tails (H-T) type. b) By using the CI we will explain the way that the distribution of prime numbers can be correlated with the non-trivial zeros of the function <em>ζ</em>(<em>s</em>) of Riemann. The Introduction and the Chapter 2 are necessary for understanding the solution. In the Chapter 3 we will present a simple method of forecasting in many very useful applications (e.g. financial, technological, medical, social, etc) developing a generalization of this new, proven here, theory which we finally apply to the solution of RH. The following Introduction as well the Results with the Discussion at the end shed light about the possibility of the proof of all the above. The article consists of 9 chapters that are numbered by 1, 2, …, 9.
文摘Considering the shortcoming in source management work for a long time, the CaiHong Group corporation propose the concep of Dynamic Consumption Norm. This has increased the enthusiasm of the workers to economize sources and reduce cost. Within a year, the corporation economizes sources for 20 billion yuan and achieves a notable effect in the work of reducing the cost and increasing the economic benefit. In order to assist the implementation of the new method in source management, both the corporation and the Education and Research Center of Plant Engineering in China have developed this 'Source Management And Analysis System '.
文摘为了提高建筑施工安全风险管理的信息化水平,以建筑施工活动及事故风险类型为研究对象,建立施工安全知识图谱。通过知识图谱改进作业条件危险性评价法(LEC)实现安全风险的定量计算,并基于知识图谱进行风险位置识别和不安全因素分析。研究提出安全风险虚体实化理念,实现了安全风险信息在数字空间实体化表达;基于建筑信息模型(Building Information Modeling, BIM)和知识图谱技术,建立了建筑施工安全风险信息模型(Building Construction Safety Risk Information Model, BCSRIM)。该模型有效避免了传统LEC法中主观因素产生的影响,实现了建筑施工安全风险定量计算、风险位置识别、风险分析及可视化管理。利用Revit二次开发技术,在Microsoft Visual Studio中使用C#语言连接Neo4j图数据库,完成了基于知识图谱的BCSRIM的开发。试验显示,研究提出的BCSRIM对提高施工现场的管理水平具有较高的实用价值。
