Synthesis of Some New Thioethers and 4-Thiazolidinones Bearing 3-(Pyridine-4'-yl)-1,2,4-Triazino[5,6-<i>b</i>]Indole Moiety as Antifungal Agents

Some new asymmetric thioethers 5 and 4-thiazolidinones 6 have been obtained from condensation of 5-formyl-3-(pyridin-4'-yl)-1,2,4-triazino[5,6-b] indole (3) with halogenated aromatic amines followed by addition of thiophenol and/or cycloaddition with thiolactic acids in nonpolar solvents. Structures of the products confirmed by elemental analysis and spectral measurements. The new systems obtained were evaluated as antifungal agents.

Green Synthesis of Aryl Thioethers through Cu-catalysed C-S Coupling of Thiols and Aryl Boronic Acids in Water

An efficient, practical, highly selective and environmentally benign method is reported for the synthesis of aryl thioethers via the coupling of thiols with aryl boronic acids in the presence of NaOH and a catalytic amount of CuSO4 at 130 ℃ using water as a green solvent. The products were obtained in moderate to excellent yields;more importantly, the use of toxic ligands and solvents was avoided. A broad range of aryl boronic acids and scalable processes make this methodology valuable and versatile for the synthesis of a broad range of aryl sulfides.

An Efficient and Odorless Synthesis of Thioethers Using 2-[Bis（alkylthio）methylene]-3-oxo-N-o-tolylbutanamides as Thiol Equivalents

Using 2-[bis（alkylthio）methylene]-3-oxo-N-o-tolylbutanamides 1 as odorless thiol equivalents, an efficient and odorless synthesis of thioethers has been developed. Promoted by NaOH in EtOH, the cleavage of 1 commences to generate thiolate anions, and the generated thiolate anions then react with halides to give various thioethers in good yield. It is noteworthy that only a very faint odor ofthiols can be perceived during both the reaction and the workup.

Upper-rim-modified thioether thiacalix[4]arene used for liquid-liquid extraction of Au(Ⅲ)and Pd(Ⅱ)in hydrochloric acid medium

Gold(Au)and palladium(Pd)play an increasing role in the production and human life;Therefore,it is of great significance to study their recovery.A 5,11,17,23-tetra-ethylthio-25,26,27,28-tetra-hydroxyl thiacalix[4]arene(TCAET)was synthesized specifically for the capture of Au(Ⅲ)and Pd(Ⅱ)from HCl medium by liquid-liquid extraction.In a 0.1 mol·L^(-1)HCl medium,the transfer of Au(Ⅲ)and Pd(Ⅱ)from the aqueous phase to the organic phase was highly efficient,with a transfer ratio of 100%for Au(Ⅲ)and 98%for Pd(Ⅱ).Furthermore,the extraction equilibrium time for Au(Ⅲ)was just 5 min.Job's method data demonstrated that TCAET formed complexes with Au(Ⅲ)and Pd(Ⅱ)in a ratio of 2:3 and 1:1,respectively,during the extraction process.TCAET showed high selectivity toward Pd(Ⅱ)and Au(Ⅲ)over other competing metal ions.Moreover,both Au(Ⅲ)and Pd(Ⅱ)could be successfully stripped from the loaded organic phases with a 1.0 mol·L^(-1)thiourea in 0.5 mol·L^(-1)HCl and 0.5 mol·L^(-1)thiourea in 0.5 mol·L^(-1)HCl,respectively.Results obtained from five consecutive extraction-stripping cycles showed good reusability of TCAET toward Au(Ⅲ)and Pd(Ⅱ)recovery.The conclusion can provide a certain reference for thiacalixarene in the recovery of precious metal species.

Efficient synthesis of unsymmetrical diaryl thioethers via TBAF-mediated denitrative substitution of nitroarenes with PhSTMS under mild and neutral conditions

Tetrabutylammonium fluoride （TBAF） effectively facilitated a denitrative substitution reaction of electron-deficient nitroarenes with phenylthiotrimethylsilane （PhSTMS） under mild and base-free neutral conditions at room temperature, providing a practical and efficient synthesis of useful unsymmetrical diaryl thioethers. Nitroarenes bearing ortho- and para-positioned electron-withdrawing groups are the most reactive substrates, indicating that this reaction most possibly proceeded via the nucleophilic aromatic substitution （SNAr） mechanism.

Recent advances in directα-C(sp^(3))-H bond functionalization of thioethers

Thioether skeletons are widely present in drugs,natural products,functional materials,and life science.In the past decade,the selective C–H functionalization of thioethers has been extensively studied to construct novel thioether derivatives.This mini-review systematically introduces the recent advances in the field of the directα-C(sp^(3))-H functionalization of thioethers.

Molecular Engineering Design for High-Performance Aqueous Zinc-Organic Battery

Novel small sulfur heterocyclic quinones(6a,16adihydrobenzo[b]naphtho[2′,3′:5,6][1,4]dithiino[2,3-i]thianthrene-5,7,9,14,16,18-hexaone(4S6Q)and benzo[b]naphtho[2′,3′:5,6][1,4]dithiino[2,3-i]thianthrene-5,9,14,18-tetraone(4S4Q))are developed by molecule structural design method and as cathode for aqueous zincorganic batteries.The conjugated thioether(–S–)bonds as connected units not only improve the conductivity of compounds but also inhibit their dissolution by both extendedπ-conjugated plane and constructed flexible molecular skeleton.Hence,the Zn//4S6Q and Zn//4S4Q batteries exhibit satisfactory electrochemical performance based on 3.5 mol L-1(M)Zn(ClO4)2electrolyte.For instance,the Zn//4S6Q battery obtains 240 and 208.6 mAh g^(-1)of discharge capacity at 150 mA g^(-1)and 30 A g^(-1),respectively.The excellent rate capability is ascribed to the fast reaction kinetics.This system displays a superlong life of 20,000 cycles with no capacity fading at 3 A g^(-1).Additionally,the H+-storage mechanism of the 4S6Q compound is demonstrated by ex situ analyses and density functional theory calculations.Impressively,the battery can normally work at-60℃benefiting from the anti-freezing electrolyte and maintain a high discharge capacity of 201.7 mAh g^(-1),which is 86.2%of discharge capacity at 25℃.The cutting-edge electrochemical performances of these novel compounds make them alternative electrode materials for Zn-organic batteries.

Effect of Different Loadings on the Performance of Ni2P/Al2O3 Catalysts for Low-Temperature Thioethering and Selective Hydrogenation of Diolefins in Liquefied Petroleum Gas

In this study,different loadings of x%Ni_(2)P/γ-Al_(2)O_(3)(x=6%,9%,12%,15%,18%)catalysts with aluminum oxide(Al_(2)O_(3))as the carrier,nickel chloride(NiCl2)as the nickel(Ni)source,and ammonium hypophosphite(NH_(4)H_(2)PO_(2))as the phosphorus(P)source were prepared by the equal volume impregnation method to investigate the effects of different loadings on the performance of the selective hydrogenation of diolefins and thiol etherification in LPG.The physicochemical properties of the catalysts were characterized by XRD,BET,SEM,TEM,H_(2)-TPR,and XPS,and the catalytic activity of the catalysts was evaluated in a fixed-bed microreactor.The results showed that a change in the loading affected the catalyst crystalline phase structure and size,specific surface area,P coverage,active phase dispersion,and catalytic activity.At 6%,9%,and 12%loadings the catalysts had an Ni phase but there was no obvious Ni_(2)P phase in the nickel phosphide;at 15%loading a single Ni_(2)P phase was obtained,and at 18%loading both Ni_(2)P and Ni1_(2)P_(5) phases appeared.There was a P enrichment on the catalyst surface,and the higher the loading the more P species were enriched on the surface,but some of the P was lost during the catalyst reduction process due to the production of phosphine(PH3)gas.The 15%Ni_(2)P/γ-Al_(2)O_(3) catalyst had the largest Ni/Al ratio and the best dispersion.The Ni_(2)P active phase size was small at about 4.25 nm and Ni_(2)P was uniformly dispersed on the catalyst surface without agglomeration.The 15%Ni_(2)P/γ-Al_(2)O_(3) catalyst had the best catalytic activity at a pressure of 2.0 MPa,a liquid hourly space velocity(LHSV)of 3.0 h-1,and a hydrogen to hydrocarbon ratio of 12.The 1,3-butadiene conversion was 97.45%and the methanethiol removal was 100%at a temperature of 140℃.

Preparation and Properties of Vegetable-Oil-Based Thioether Polyol and Ethyl Cellulose Supramolecular Composite Films

Ethyl cellulose(EC),an important biomass-based material,has excellent film-forming properties.Nevertheless,the high interchain hydrogen bond interaction leads to a high glass transition temperature of EC,which makes it too brittle to be used widely.The hydroxyl group on EC can form a supramolecular system in the form of a non-covalent bond with an effective plasticizer.In this study,an important vegetable-oil-based derivative named dimer fatty acid was used to prepare a novel special plasticizer for EC.Dimer-fatty-acid-based thioether polyol(DATP)was synthesized and used to modify ethyl cellulose films.The supramolecular composite films of DATP and ethyl cellulose were designed using the newly-formed van der Waals force.The thermal stability,morphology,hydrophilicity,and mechanical properties of the composite films were all tested.Pure EC is fragile,and the addition of DATP makes the ethyl cellulose films more flexible.The elongation at the break of EC supramolecular films increased and the tensile strength decreased with the increasing DATP content.The elongation at the break of EC/DATP(60/40)and EC/DATP(50/50)was up to 40.3%and 43.4%,respectively.Noticeably,the thermal initial degradation temperature of the film with 10%DATP is higher than that of pure EC,which may be attributed to the formation of a better supramolecular system in this composite film.The application of bio-based material(EC)is environmentally friendly,and the novel DATP can be used as a special and effective plasticizer to prepare flexible EC films,making it more widely used in energy,chemical industry,materials,agriculture,medicine,and other fields.

A Novel Method of Preparing Unsymmetrical Thioether from Disulfides

The disulfides reacted with zinc in DMF, followed by alkyl halides, giving unsymmetrical thioether in excellent yields. This reaction takes place under mild and neutral conditions.

A thioether-functionalized pyrene-based covalent organic framework anchoring ultrafine Au nanoparticles for efficient photocatalytic hydrogen generation

Covalent organic frameworks(COFs)have lately emerged as a blooming class of potential materials for photocatalytic water splitting because of their high crystallinity,huge surface areas,and structural versatility.However,the photocatalytic performance for most pure COFs face some limitations factors,such as the significant recombination of photogenerated carriers and slow charge transfer.Herein,a novel thioether-functionalized pyrene-based COF(S_(4)-COF)was effectively produced and chosen as a support for the immobilization of ultrafine gold nanoparticles(Au NPs).S_(4)-COF photocatalyst with Au as cocatalyst demonstrates remarkable photocatalytic activity with a H_(2) generation rate of 1377μmol g^(−1) h^(−1) under visible light(>420 nm),which is ca.4.5-fold increase comparing to that of pure S_(4)-COF(302μmol g^(−1) h^(−1)).Au NPs anchored on S_(4)-COF possess an ultrafine size distribution ranging from 1.75 to 6.25 nm with an average size centered at 3.8 nm,which benefits from the coordination interaction between thioether groups and Au.Meanwhile,the produced Au@S_(4)-COF can generate a stable photocatalytic H_(2) generation during the four recycles and preserve its crystallinity structure after the stability testing.The Au NPs anchored on the S_(4)-COF photocatalyst can greatly accelerate the separation of photogenerated carriers and increase charge transfer because of the combined function of Au NPs and thioether groups.Such a method can not only prevent the aggregation of Au NPs onto thioether-containing COFs to achieve long-term photostability but also allow uniform dispersion for an ordered structure of photocatalysts.This work provides a rational strategy for designing and preparing COF-based photocatalysts for solar-driven H_(2) production.

Synthesis and Adsorption Studies on Magnetic Microbeads of Polythioether-arylamine Resins

By the suspended condensation reaction of poly(choloromethylthiirane)with o-tolidine and o- dianisidine respectively, two newmicrobeads chelating resins were synthesized by usingγ-Fe_2O_3 asmagnetic core. Their adsorption properties for Hg(Ⅱ), Cu(Ⅱ), Zn(Ⅱ), Pb(Ⅱ), Au(Ⅲ), Pd(Ⅱ), Pt (Ⅳ)and Ag(Ⅰ)were investigated. Themicrobeads posses excellent adsorbability for Hg(Ⅱ) and noble metalions, and predominantly adsorbed Pd(Ⅱ)or Hg(Ⅱ)in the coexistence ofCu(Ⅱ), Zn(Ⅱ)and Mg(Ⅱ).

Synthesis,Crystal Structure and Antifungal Activities of 3-Methyl-1-(4-methylphenyl)-4-(N-4-trifluoromethylphenyl)-aminomethyl-5-(4-methoxyphenylthio)-1H-pyrazole

The title compound 3-methyl-l-（4-methylphenyl）-4-（N-4-trifluoromethylphenyl） aminomethyl-5-（4-methoxyphenylthio）-lH-pyrazole has been synthesized via a four-step reaction and characterized by IR, 1H NMR, elemental analysis and X-ray crystallography. The compound crystallizes in monoclinic, space group P21/c with a = 8.7170（15）, b = 18.355（3）, c = 15.292（3） A, fl = 103.445（3）°, V= 2379.7（7） A3, Dc = 1.350 g/cm3, Z = 4, p = 0.184, F（000） = 1008, and the final R = 0.0491 and wR = 0.1339 for 4160 observed reflections （I 〉 2a（/））. The results demonstrate that there is a face-to-face π-π stacking interaction between one benzene ring （C（19）-C（24）） and another （C（I 3）-C（! 8）） at a plane-plane distance of 3.3539 A. The ring normal and vector between the ring centroids form an angle of 18.2° up to the centroid-to-centroid distance of 3.5273 A. The crystal structure is stabilized by the intermolecular hydrogen bond of N（3）-H（3A）...N（2） （symmetry code： A -x＋l, -y＋l, -z）. The preliminary biological test shows that the title compound has a moderate antifungal activity.

Synthesis of core-shell structured polymers with inserted thioether from a multi-functional scaffold

The synthesis of a thioether inserted, core-shell structured polymer from the scaffold of hyperbranched polyglycerol (PG) was described. PG was first allyl functionalized, and in the presence of AlBN, the allyl groups further underwent radical addition to thiol compounds, thus thiol functional polyethylene oxide monomether (MPEO) were grafted onto PG. Similarly, 2-mercaptoethylammonium chloride was introduced onto PG via thiol addition, and the residual amino groups were further quaternized with decyl bromide, leading to an amphiphilic core-shell structure polymer. (c) 2007 De Cheng Wan. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Catalytic Desulfurization of n-Butyl-sulfide over HZSM-5 Zeolite in the Presence of a Hydrogen Provider

The catalytic desulfurization of a model organic sulfurous compound n-butyl-sulfide in a fixed bed microreactor is studied in the presence of catalyst and a hydrogen provider. The experimental results show that the appropriate reaction conditions are： a mixed catalyst of HZSM-5 zeolite and Co-Mo/Al2O3-TiO2, a reaction temperature of 300℃, atmosphere pressure, a feed speed of 50 mL/h and a mass hourly space velocity of 3.0 h^-1 A higher catalytic property and desulfurization efficiency of the mixed catalyst of HZSM-5 zeolite and Co-Mo/Al2O3-TiO2 is achieved. The adsorption and desulfurization efficiency of the FCC gasoline from Shenghua Refinery, which is affiliated to China University of Petroleum （East China）, is 53.0 %.

Indium-mediated Facile Synthesis of (6-Chloropyridine-3-yl) methyl Heterocyclic Thioether Derivatives in Aqueous Media

A series of substituted (6-chloropyridine-3-yl)methyl heterocyclic thioether derivatives were prepared by indium mediating in water. The preliminary biological tests showed that compound 3d exhibited good antiviral activity.

MODIFICATION OF PALLADIUM METALLIC CATALYST WITH POLYMER-ANCHORED THIOETHER LIGANDS

A well-dispersed metallic palladium catalyst modified by polymer-anchored thioether ligands was used for the hydrogenation of cyclopentadiene to cyclopentene with high activity and selectivity in ambient condition. The evidences to show the modification of catalytic properties by polymer anchored ligands were given.

CROSS-LINKING OF AROMATIC POLY(THIOETHER)S

A novel cross-linking process using two high molecular weight aromatic poly（thioether）s, which were synthesized by the reactions of 4,4＇-thiobisbenzenethiol with 4,4＇-difluorobenzophenone and 4,4＇-difluorodiphenylsulfone, respectively, and commercially available lower molecular weight poly（p-phenylene sulfide） was investigated. These reactions were carried out in bulk by the addition of silver tetrafluroborate and α,α＇-dibromo-p-xylene at 190℃ over a period of 45 min. Furthermore, the same procedure could be modified to cross-link compression-molded films of these three polymers. The thermal and solubility behaviors of these polymers before and after cross-linking reactions, are presented.

INTERACTION OF PLASMA—LIQUID IN AN OXYGEN GLOW DISCHARGE Ⅲ.OXIDATION DESULFURIZATION OF ETHYL—THIOETHER

A few factors affecting plasma oxidation desulfurization of ethyl- thioether were investigated.Under the typical conditions,the conversion and degree of desulfurization of ethyl-thioether can be achieved up to 88% and 79% respectively.

Synthesis of Novel Cyclic Aryl Ether Thioether Ketone (Sulfone) Oligomers

Two kinds of macrocyclic oligomers containing aromatic sulfide linkages have been synthesized by the solution polycondensation in high yield. The cyclic compounds were characterized by H-1 and C-13 NMR, by and MALDI - TOF MS.