Survey of lightweighting methods of huge 3D models for online Web3D visualization

Background With the rapid development of Web3D technologies, the online Web3D visualization, particularly for complex models or scenes, has been in a great demand. Owing to the major conflict between the Web3D system load and resource consumption in the processing of these huge models, the huge 3D model lightweighting methods for online Web3D visualization are reviewed in this paper. Methods By observing the geometry redundancy introduced by man-made operations in the modeling procedure, several categories of light-weighting related work that aim at reducing the amount of data and resource consumption are elaborated for Web3D visualization. Results By comparing perspectives, the characteristics of each method are summarized, and among the reviewed methods, the geometric redundancy removal that achieves the lightweight goal by detecting and removing the repeated components is an appropriate method for current online Web3D visualization. Meanwhile, the learning algorithm, still in improvement period at present, is our expected future research topic. Conclusions Various aspects should be considered in an efficient lightweight method for online Web3D visualization, such as characteristics of original data, combination or extension of existing methods, scheduling strategy, cache man-agement, and rendering mechanism. Meanwhile, innovation methods, particularly the learning algorithm, are worth exploring.

Study upon Modeling and Visualization of 3D Geologic Body Based on Generalized Tri-Prism

According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.

DATA MODEL AND VISUALIZATION OF 3D CITY LANDSCAPE BASED ON INTEGRATED DATABASES

Data acquisition and modeling are the two important, difficult and costful aspects in a Cybercity project. 2D-GIS is mature and can manage a lot of spatial data. Thus 3D-GIS should make the best of data and technology of 2D-GIS. Construction of a useful synthetic environment requires integration of multiple types of information like DEM, texture images and 3D representation of objects such as buildings. In this paper, the method for 3D city landscape data model and visualization based on integrated databases is presented. Since the data volume of raster are very huge, special strategies(for example, pyramid gridded method) must be adopted in order to manage raster data efficiently. Three different methods of data acquisition, the proper data structure and a simple modeling method are presented as well. At last, a pilot project of Shanghai Cybercity is illustrated.

Visualization of Landscape Changes in a 3D Environment Using the Storytelling Approach—The Example of the City of Pristina

This study proposes a detailed concept of how landscape changes can be transferred and communicated in a 3D environment using the storytelling approach. In 2018, Mocnik and Fairbairn argued that maps are good for representing a geographic space but texts have a better benefit than maps for telling a story [1]. A framework is presented on how a landscape change can be retrieved out of textual descriptions. A prototype of a 3D model with a projection on top of it was developed. The case study tells the story of the landscape change in the city of Pristina. The key element of the visualization is a timeline. Several media like cadastral maps, orthophotos, texts, graphics, and background sound are used and combined in an animated light show and the visualization was evaluated within a user study.

Research on 3D Modeling and Visualization of Coal Pillars for Surface Protection

In order to safely exploit coal resource, protection coal pillars must be prepared in coal mines. Some correlative parameters of protection coal pillar are calculated by Drop face and Drop line methods. Models of protecting surface objects and coal pillars are established by TIN modeling and object-oriented technique. By using ACCESS2000as the database and the VC＋＋ and OpenGL as the language, the calculation of protective coal pillars is realized and the 3D-visulizaiton system for protected objects on ground surface and for coal pillars is developed. The system can obtain the data of characteristic points on the surface interactively from the digitized mine topography map, constructing 3D model automatically. It can also obtain the interrelated parameters of the coal seam and drill hole data from existing geolog!cal surveying database to calculate the location, surface area and the total coal columns. The whole process can be computed quickly and accurately. And the 3D visualization system was applied in a mine, showing that the system solve the problem of complex calculation, not only realized the automatic 3D mapping and visualization of coal pillars for buildings protection, but also greatly improves the working efficiency.

The establishment of 3D visualization modeling for the jointed slope

The 3D visualization model of slop with structural plane can displayed the characters of structural plane in slop directly, and illustrated the spatial combination. It is a modem and critical question in the field of geotechnical engineering. Based on the peculiarity of the reconnaissance and the research of the visualization by formers, systemized the method fit for building 3D visualization model of slop with structural plane. Write the special program with Visual C^-＋ computer language and illustrated it by OpenGL, the program can displayed and captured the random section plane. The program has a satisfied result by proving with the real projects.

In-situ three-dimensional visualization of dynamic tension deformation in ferrite stainless steels

An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.

3D stratum modeling in urban geological information visualization

A conceptual model called virtual borehole is presented in practice engineering.Based on borehole data and the geologic section and by using GMS 6.0,MAPGIS software,the 3D stratum model of urban geologic information is established.The visual expression and analysis of 3D geologic data can be better realized in the open model established.

An Approach to Computer Modeling of Geological Faults in 3D and an Application

3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geological faults in 3D is currently a topical research area. Structural modeling techniques of complex geological entities contain- ing reverse faults are discussed and a series of approaches are proposed. The geological concepts involved in computer modeling and visualization of geological fault in 3D are explained, the type of data of geological faults based on geo- logical exploration is analyzed, and a normative database format for geological faults is designed. Two kinds of model- ing approaches for faults are compared: a modeling technique of faults based on stratum recovery and a modeling tech- nique of faults based on interpolation in subareas. A novel approach, called the Unified Modeling Technique for stratum and fault, is presented to solve the puzzling problems of reverse faults, syn-sedimentary faults and faults terminated within geological models. A case study of a fault model of bed rock in the Beijing Olympic Green District is presented in order to show the practical result of this method. The principle and the process of computer modeling of geological faults in 3D are discussed and a series of applied technical proposals established. It strengthens our profound compre- hension of geological phenomena and the modeling approach, and establishes the basic techniques of 3D geological modeling for practical applications in the field of geosciences.

Building Information Modeling-Based Secondary Development System for 3D Modeling of Underground Pipelines

Underground pipeline networks constitute a major component of urban infrastructure,and thus,it is imperative to have an efficient mechanism to manage them.This study introduces a secondary development system to efficiently model underground pipeline networks,using the building information modeling(BIM)-based software Revit.The system comprises separate pipe point and tubulation models.Using a Revit application programming interface(API),the spatial position and attribute data of the pipe points are extracted from a pipeline database,and the corresponding tubulation data are extracted from a tubulation database.Using the Family class in Revit API,the cluster in the self-built library of pipe point is inserted into the spatial location and the attribute data is added;in the same way,all pipeline instances in the pipeline system are created.The extension and localization of the model accelerated the modeling speed.The system was then used in a real construction project.The expansion of the model database and rapid modeling made the application of BIM technology in three-dimensional visualization of underground pipeline networks more convenient.Furthermore,it has applications in pipeline engineering construction and management.

Application of 3D stereoscopic visualization technology in casting aspect

3D stereoscopic visualization technology is coming into more and more common use in the field of entertainment,and this technology is also beginning to cut a striking figure in casting industry and scientific research.The history,fundamental principle,and devices of 3D stereoscopic visualization technology are reviewed in this paper.The authors’research achievements on the 3D stereoscopic visualization technology in the modeling and simulation of the casting process are presented.This technology can be used for the observation of complex 3D solid models of castings and the simulated results of solidification processes such as temperature,fluid flow,displacement,stress strain and microstructure,as well as the predicted defects such as shrinkage/porosity,cracks,and deformation.It can also be used for other areas relating to 3D models,such as assembling of dies,cores,etc.Several cases are given to compare the illustration of simulated results by traditional images and red-blue 3D stereoscopic images.The spatial shape is observed better by the new method.The prospect of3D stereoscopic visualization in the casting aspect is discussed as well.The need for aided-viewing devices is still the most prominent problem of 3D stereoscopic visualization technology.However,3D stereoscopic visualization represents the tendency of visualization technology in the future;and as the problem is solved in the years ahead,great breakthroughs will certainly be made for its application in casting design and modeling and simulation of the casting processes.

Impact of three dimensional printing in orthopedics

The primary objective of this article is to explore effects of latest development in the area of three dimensional(3D)printing&to assess its abilities,and further undertake helpful reporting.Here the focus is to assess ad vantages of 3D printing in orthopedics and analyze how 3D printed models help solve complex 3D orthopedics distortions.This study identified that 3D models manufactured by 3D printing models reduce medical parts de velopment cost and surgical planning time.Integrating 3D printing with orthopaedics helps in understanding the conditions of problems and achieving the operation succssfully.This technology can enable doctors/surgeons to design,produce,recreate and plan operations more accurately,carefully,and economicaly.3D models can assist specialists with a visual comprehension of the patient-particular pathology and life structures.Innovation in 3D printing initiated a scaffold for the virtual outline and execution of medical procedures.This research proposes the utilisation of 3D printers as an elective procedure for the fabrication of parts.It empowers surgeons/patients for better raining,education and research.In the future,there is a foreseeable expansion of additive manufacturing in orthopedics.

Unified Data Model of Urban Air Pollution Dispersion and 3D Spatial City Model:Groundwork Assessment towards Sustainable Urban Development for Malaysia

Understanding the behavior of urban air pollution is important en route for sustainable urban development (SUD). Malaysia is on its mission to be a developed country by year 2020 comprehends dealing with air pollution is one of the indicators headed towards it. At present monitoring and managing air pollution in urban areas encompasses sophisticated air quality modeling and data acquisition. However, rapid developments in major cities cause difficulties in acquiring the city geometries. The existing method in acquiring city geometries data via ground or space measurement inspection such as field survey, photogrammetry, laser scanning, remote sensing or using architectural plans appears not to be practical because of its cost and efforts. Moreover, air monitoring stations deployed are intended for regional to global scale model whereby it is not accurate for urban areas with typical resolution of less than 2 km. Furthermore in urban areas, the pollutant dispersion movements are trapped between buildings initiating it to move vertically causing visualization complications which imply the limitations of existing visualization scheme that is based on two-dimensional (2D) framework. Therefore this paper aims is to perform groundwork assessment and discuss on the current scenario in Malaysia in the aspect of current policies towards SUD, air quality monitoring stations, scale model and detail discussion on air pollution dispersion model used called the Operational Street Pollution Model (OSPM). This research proposed the implementation of three-dimensional (3D) spatial city model as a new physical data input for OSPM. The five Level of Details (LOD) of 3D spatial city model shows the scale applicability for the dispersion model implementtation. Subsequently 3D spatial city model data commonly available on the web, by having a unified data model shows the advantages in easy data acquisition, 3D visualization of air pollution dispersion and improves visual analysis of air quality monitoring in urban areas.

BUILDING MODELING FOR 3D CITY MODEL

New development in urban planning, cityscape, real estate management and the like, calls for new demands for 3D city model. There are so many objects in 3D city model such as building, river, road, and so on. The building model is very important in 3D city model. In recent years,a lot of research work about visualization has been done. In our opinions,visualization is only a part of 313 city model, while interactive operation about buildings is rather important as well. In order to implement interactive operation (create , edit, query,etc. ), good data structure and model must be developed.

Study on Visualization of Virtual City Model Based on Internet

With the rapid development of computer graphics, distributed-computing and Internet, it is possible to achieve Internet-based virtual city. This paper dwells on the method of the terrain and its feature modeling and complex entity modeling in the virtual city. Then, discusses the method for Internet-based virtual city 3D visualization and the design of the Browser/Server architecture of the system of virtual city in the network environment. Finally, Java and Java 3D are used to show an experiment example, and the related conclusion about Internet-based virtual city 3D displaying and the client-side interactive operation is given.

Three-Dimensional Visual Analysis for Construction Layout of Reservoir Project

It is difficult to analyze the inter-relationship for the construction layout of a reservoir project scientifically and intuitively.According to the characteristics of broad field and huge information,the modeling methods of digital terrain and solid model as well as the techniques of texture mapping and scene navigation are adopted.The simulation system is developed by C program language,which includes the functions of the interactive navigation of 3D scene,the visual inquiry of project digital model information,the storage and management of project information.A certain reservoir is taken as a case.The 3D visual analysis for the construction layout and engineering information are obtained.The proposed system is of great advantages in dealing with large amount of information and the method provides a theoretical basis and technical support for the construction layout of a reservoir project.

2D Coupled 3D:A New Numerical Model for Dual - Structured - Aquifer System

This paper points out that a successful numerical simulation is to construct a correct conceptional model which is very dose to the natural condition. A new model, two dimensional coupled three dimensional model (2D -3D ) is presented in the Present paper,which is the most suitable one for the dual - structured - aquifer system. An example of Wenyinghu area is shown.By using the 2D-3D model, a satisfied result of the simulated area is achieved.

3D Geology Modeling from 2D Prospecting Line Profile Map

Using prospecting line profile map in combination with drilling and other information for 3D reconstruction of geological model is an important method of 3D geological modeling.?This paper?discusses the theory and implementation method of 2D prospecting line map into 3D prospecting line map and then into 3D model. The authors propose that it needs twice upgrading dimension to reconstruction 3D geology model from prospecting line profile map. The first upgrading dimension is to convert profile from 2D into 3D profile,?i.e.?the 2D points in the 2D profile map upgrading dimensional transformation to 3D points in a 3D profile. The second upgrading dimension is that transform 0D point 1D curve and 2D polygon feature into 1D curve, 2D surface and 3D solid feature. The paper reexamines contents and forms in prospecting line map from the two different viewpoints of geology and geographic information science. The process of 3D geology modeling from 2D prospecting map is summarized as follows. Firstly, profile is divided into several sections by beginning, end and drill point of the prospecting line. Next, a 3D folded upright profile frame is built by 2D folded prospecting line on the plan map. Then, 2D points of features on 2D profile are converted into 3D points on 3D profile section by section. And then, adding switch control points for the long line crossover two segments. Lastly, 1D curve features are upgraded to 2D surface.

Hierarchical Merging &Generalization Method of Three-Dimension City Model Group Based on the Theory of Spatial Visual Cognition

In order to simplify the three-dimensional building group model, this paper proposes a clustering generalization method based on visual cognitive theory. The method uses road elements to roughly divide scenes, and then uses spatial cognitive elements such as direction, area, height and their topological constraints to classify them precisely, so as to make them conform to the urban morphological characteristics. Delaunay triangulation network and boundary tracking synthesis algorithm are used to merge and summarize the models, and the models are stored hierarchically. The proposed algorithm should be verified experimentally with a typical urban complex model. The experimental results show that the efficiency of the method used in this paper is at least 20% higher than that of previous one, and with the growth of test data, the higher efficiency is improved. The classification results conform to human cognitive habits, and the generalization levels of different models can be relatively unified by adaptive control of each threshold in the clustering generalization process.

The Application of 3D Visualization Technology in the Construction of Water Conservancy and Hydropower

This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D visualization based on GIS, then discusses the method of constructing 3D visual digital model, and then introduces the terrain digital technology, feature modeling technology. Finally, the technical route shows that this method has good practicability.