Effects of Fiber Volume Fraction on Damping Properties of Three-Dimensional and Five-Directional Braided Composites

The effects of fiber volume fraction on damping properties of carbon fiber three-dimensional and five-directional( 3D-5Dir)braided carbon fiber / epoxyres in composite cantilever beams were studied by experimental modal analysis method. Meanwhile,carbon fiber plain woven laminated / epoxy resin composites with different fiber volume fraction were concerned for comparison. The experimental result of braided specimens shows that the first three orders of natural frequency increase and the first three orders of the damping ratios of specimens decrease, when the fiber volume fraction increases. Furthermore,larger fiber volume fraction will be valuable for the better anti-exiting property of braided composites,and get an opposite effect on dissipation of vibration energy. The fiber volume fraction is an important factor for vibration performance design of braided composites. The comparison between the braided specimens and laminated specimens reveals that 3D braided composites have a wider range of damping properties than laminated composites with the same fiber volume fractions.

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method （FEM）. On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data, the reasonability and veracity of calculation are confirmed at the same time.

DOA estimation of high-dimensional signals based on Krylov subspace and weighted l_(1)-norm

With the extensive application of large-scale array antennas,the increasing number of array elements leads to the increasing dimension of received signals,making it difficult to meet the real-time requirement of direction of arrival(DOA)estimation due to the computational complexity of algorithms.Traditional subspace algorithms require estimation of the covariance matrix,which has high computational complexity and is prone to producing spurious peaks.In order to reduce the computational complexity of DOA estimation algorithms and improve their estimation accuracy under large array elements,this paper proposes a DOA estimation method based on Krylov subspace and weighted l_(1)-norm.The method uses the multistage Wiener filter(MSWF)iteration to solve the basis of the Krylov subspace as an estimate of the signal subspace,further uses the measurement matrix to reduce the dimensionality of the signal subspace observation,constructs a weighted matrix,and combines the sparse reconstruction to establish a convex optimization function based on the residual sum of squares and weighted l_(1)-norm to solve the target DOA.Simulation results show that the proposed method has high resolution under large array conditions,effectively suppresses spurious peaks,reduces computational complexity,and has good robustness for low signal to noise ratio(SNR)environment.

Three-Dimensional Model Test for Port Engineering with Multi-Directional Waves

-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.

THE CHARACTERISTIC FINITE ELEMENT ALTERNATING-DIRECTION METHOD AND ANALYSIS FOR THREE-DIMENSIONAL NUMERICAL RESERVOIR SIMULATION

Petroleum science has made remarkable progress in organic geochcmistry and in the research into the theories of petroleum origin, its transport and accumulation. In estimating the oil-gas resources of a basin, the knowledge of its evolutionary history and especially the numerical computation of fluid flow and the history of its changes under heat is vital. The mathematical model can be described as a coupled system of nonlinear partial differentical equations with initial-boundary value problems. This thesis, from actual conditions such as the effect of fluid compressibility and the three-dimensional characteristic of large-scale science-engineering computation, we put forward a kind of characteristic finite element alternating-direction schemes and obtain optimal order estimates in L^2 norm for the error in the approximate assumption.

EFFECTS OF THREE DIMENSIONAL DIRECTION OF SECOND DENDRITE ON COMPETITIVE GRAIN GROWTH IN DD8 SUPERALLOY

ＥＦＦＥＣＴＳＯＦＴＨＲＥＥＤＩＭＥＮＳＩＯＮＡＬＤＩＲＥＣＴＩＯＮＯＦＳＥＣＯＮＤＤＥＮＤＲＩＴＥＯＮＣＯＭＰＥＴＩＴＩＶＥＧＲＡＩＮＧＲＯＷＴＨＩＮＤＤ８ＳＵＰＥＲＡＬＬＯＹＬｉｕＺｈｉｙｉ；ＷｅｉＰｅｎｇｙｉ；ＦｕＨｅｎｇｚｈｉ（ＳｔａｔｅＫｅ...

Obstacle avoidance method of three-dimensional obstacle spherical cap

Focusing on obstacle avoidance in three-dimensional space for unmanned aerial vehicle(UAV), the direct obstacle avoidance method in dynamic space based on three-dimensional velocity obstacle spherical cap is proposed, which quantifies the influence of threatening obstacles through velocity obstacle spherical cap parameters. In addition, the obstacle avoidance schemes of any point on the critical curve during the multi-obstacles avoidance are given. Through prediction, the insertion point for the obstacle avoidance can be obtained and the flight path can be replanned. Taking the Pythagorean Hodograph(PH) curve trajectory re-planning as an example, the three-dimensional direct obstacle avoidance method in dynamic space is tested. Simulation results show that the proposed method can realize the online obstacle avoidance trajectory re-planning, which increases the flexibility of obstacle avoidance greatly.

Alternating Direction Finite Volume Element Methods for Three-Dimensional Parabolic Equations

This paper presents alternating direction finite volume element methods for three-dimensional parabolic partial differential equations and gives four computational schemes, one is analogous to Douglas finite difference scheme with second-order splitting error, the other two schemes have third-order splitting error, and the last one is an extended LOD scheme. The L2 norm and H1 semi-norm error estimates are obtained for the first scheme and second one, respectively. Finally, two numerical examples are provided to illustrate the efficiency and accuracy of the methods.

Nonlinear Principal and Canonical Directions from Continuous Extensions of Multidimensional Scaling

A continuous random variable is expanded as a sum of a sequence of uncorrelated random variables. These variables are principal dimensions in continuous scaling on a distance function, as an extension of classic scaling on a distance matrix. For a particular distance, these dimensions are principal components. Then some properties are studied and an inequality is obtained. Diagonal expansions are considered from the same continuous scaling point of view, by means of the chi-square distance. The geometric dimension of a bivariate distribution is defined and illustrated with copulas. It is shown that the dimension can have the power of continuum.

A STRUCTURAL ANALYSIS OF THREE-DIMENSIONAL BRAIDS

This paper describes a study of three-dimensional braids produced by a four-step 1 × 1 method. An analytical approach is employed in conjunction with experimental investigations to establish the relationship between the braid structure and braiding parameters. Based on microscopic observations, we divide a three-dimensional braid structure into three representative regions, i.e., the interior, surface and corner, and treat the three regions, respectively. Three types of microstructural unit-cell models are then established. The surface characteristics and the relationship between the interior and surface unit-cells have been derived. Good agreement has been obtained between the calculated and measured values of fiber volume fraction of the braided composite samples.

Effective Thermal Conductivity for 3D Five-Directional Braided Composites Based on Microstructural Analysis

A method for predicting effective thermal conductivities(ETCs) of three-dimensional five-directional(3D5D) braided composites is presented. The effective thermal conductivity prediction method contains a digital image processing technology. Multiple scanning electron microscopy(SEM)images of composites are analyzed to obtain actual microstructural features. These actual microstructural features of 3D5D braided composites are introduced into representative volume element(RVE) modeling. Apart from applying actual microstructural features,compression effects between yarns are considered in the modeling of RVE,making the RVE more realistic. Therefore,the ETC prediction method establishes a representative unit cell model that better reflects the true microstructural characteristics of the 3D5D braided composites. The ETCs are predicted with the finite element method. Then thermal conductivity measurements are carried out for a 3D5D braided composite sample.By comparing the predicted ETC with the measured thermal conductivity, the whole process of the ETC prediction method is proved to be effective and accurate,where a relative error of only 2.9 % is obtained.Furthermore,the effects of microstructural features are investigated,indicating that increasing interior braiding angles and fiber fill factor can lead to higher transverse ETCs. Longitudinal ETCs decrease with increasing interior braiding angles,but increase with increasing fiber fill factor. Finally,the influence of variations of microstructure parameters observed in digital image processing are investigated. To explore the influence of variations in microstructural features on variations in predicted ETCs,the actual probability distributions of microstructural features obtained from the 3D5D braided composite sample are introduced into the ETC investigation. The results show that,compared with the interior braiding angle,variations in the fiber fill factor exhibit more significant effects on variations in ETCs.

Using Acoustic Emissions to Detect Damage in Three-Dimensional Braided Composites

Three-dimensional(3D)braided composites with better properties have been used in some particular industries.Some have had obvious signs of crack when they are braided.Others have had catastrophic failures occuring without warning.A new methodology for the analysis of failure modes in composite materials by means of acoustic emission techniques has been developed.The occurrence of fiber-breakage during tensile loading tests has been observed by the acoustic emission technology.Using acoustic emission technology is investigated as a means of monitoring 3D braided composites structures,detecting damage,and predicting impending damage.Some of the findings of the research project were presented.

POD Analysis and Low-Dimensional Model Based on POD-Galerkin for Two-Dimensional Rayleigh-Bénard Convection

Direct numerical simulation based on OpenFOAM is carried out for two-dimensional RayleighBénard( RB) convection in a square domain at high Rayleigh number of 107 and Pr = 0.71. Proper orthogonal decomposition( POD) is used to analyze the flow and temperature characteristics from POD energy spectrum and eigenmodes. The results show that the energy spectrum converges fast and the scale of vortex structures captured by eigenmodes becomes smaller as the eigenmode order increases. Meanwhile,a low-dimensional model( LDM) for RB convection is derived based on POD eigenmodes used as a basis of Galerkin project of Navier-Stokes-Boussinesq equations. LDM is built based on different number of eigenmodes and through the analysis of phase portraits,streamline and isothermal predicted by LDM,it is suggested that the error between LDM and DNS is still large.

Direct linear discriminant analysis based on column pivoting QR decomposition and economic SVD

A direct linear discriminant analysis algorithm based on economic singular value decomposition （DLDA/ESVD） is proposed to address the computationally complex problem of the conventional DLDA algorithm, which directly uses ESVD to reduce dimension and extract eigenvectors corresponding to nonzero eigenvalues. Then a DLDA algorithm based on column pivoting orthogonal triangular （QR） decomposition and ESVD （DLDA/QR-ESVD） is proposed to improve the performance of the DLDA/ESVD algorithm by processing a high-dimensional low rank matrix, which uses column pivoting QR decomposition to reduce dimension and ESVD to extract eigenvectors corresponding to nonzero eigenvalues. The experimental results on ORL, FERET and YALE face databases show that the proposed two algorithms can achieve almost the same performance and outperform the conventional DLDA algorithm in terms of computational complexity and training time. In addition, the experimental results on random data matrices show that the DLDA/QR-ESVD algorithm achieves better performance than the DLDA/ESVD algorithm by processing high-dimensional low rank matrices.

Construction of carbon nitride and MoS_2 quantum dot 2D/0D hybrid photocatalyst:Direct Z-scheme mechanism for improved photocatalytic activity

Graphite‐like carbon nitride(g‐C3N4)‐based compounds have attracted considerable attention because of their excellent photocatalytic performance.In this work,a novel direct Z‐scheme system constructed from two‐dimensional(2D)g‐C3N4nanoplates and zero‐dimensional(0D)MoS2quantum dots(QDs)was prepared through the combination of a hydrothermal process and microemulsion preparation.The morphologies,structures,and optical properties of the as‐prepared photocatalysts were characterized by X‐ray diffraction,X‐ray photoelectron spectroscopy,atomic force microscopy,transmission electron microscopy,and UV‐vis diffuse reflectance spectroscopy.In addition,the photocatalytic performances of the prepared2D/0D hybrid composites were evaluated based on the photodegradation of rhodamine B under visible‐light irradiation.The results demonstrated that the introduction of MoS2QDs to g‐C3N4greatly enhanced the photocatalytic efficiency.For the optimum7%MoS2QD/g‐C3N4photocatalyst,the degradation rate constant was8.8times greater than that of pure g‐C3N4under visible‐light irradiation.Photocurrent and electrochemical impedance spectroscopy results further demonstrated that the MoS2QD/g‐C3N4composites exhibited higher photocurrent density and lower chargetransfer resistance than those of the pure g‐C3N4or MoS2QDs.Active species trapping,terephthalic acid photoluminescence,and nitro blue tetrazolium transformation experiments were performed to investigate the evolution of reactive oxygen species,including hydroxyl radicals and superoxide radicals.The possible enhanced photocatalytic mechanism was attributed to a direct Z‐scheme system,which not only can increase the separation efficiency of photogenerated electron‐hole pairs but also possesses excellent oxidation and reduction ability for high photocatalytic performances.This work provides an effective synthesis approach and insight to help develop other C3N4‐based direct Z‐scheme photocatalytic systems for environmental purification and energy conversion.

二维复值Ginzburg-Landau方程的一个高阶紧致ADI差分格式

对二维复值金兹堡朗道(Ginzburg-Landau,GL)方程提出一个基于时间分裂的高阶紧致交替方向隐式有限差分格式。本文通过时间分裂法将GL方程分裂成一个非线性子问题及两个线性子问题,对非线性子问题以及其中一个线性子问题均通过精确积分进行计算,并对另一线性子问题构造紧致交替方向隐式差分格式进行数值计算。实际计算中,在每一时间步,利用追赶法求解一族常系数三对角线性代数方程组,从而使得算法既具有较高精度又拥有较快的计算速度。数值实验表明该算法在时间和空间方向分别具有二阶和四阶精度,并模拟了方程的一些动力学行为。

Where is the rudder of a fish?:the mechanism of swimming and control of self-propelled fish school

Numerical simulation and control of self- propelled swimming of two- and three-dimensional biomimetic fish school in a viscous flow are investigated. With a parallel computational fluid dynamics package for the two- and three-dimensional moving boundary problem, which combines the adaptive multi-grid finite volume method and the methods of immersed boundary and volume of fluid, it is found that due to the interactions of vortices in the wakes, without proper control, a fish school swim with a given flap- ping rule can not keep the fixed shape of a queue. In order to understand the secret of fish swimming, a new feedback con- trol strategy of fish motion is proposed for the first time, i,e., the locomotion speed is adjusted by the flapping frequency of the caudal, and the direction of swimming is controlled by the swinging of the head of a fish. Results show that with this feedback control strategy, a fish school can keep the good order of a queue in cruising, turning or swimming around circles. This new control strategy, which separates the speed control and direction control, is important in the construction of biomimetic robot fish, with which it greatly simplifies the control devices of a biomimetic robot fish.

Wide color gamut switchable autostereoscopic 3D display based on directional quantum-dot backlight

A switchable autostereoscopic 3-dimensional(3D) display device with wide color gamut is introduced in this paper. In conjunction with a novel directional quantum-dot(QD) backlight, the precise scanning control strategy, and the eye-tracking system, this spatial-sequential solution enables our autostereoscopic display to combine all the advantages of full resolution,wide color gamut, low crosstalk, and switchable 2D/3D. And also, we fabricated an autostereoscopic display prototype and demonstrated its performances effectively. The results indicate that our system can both break the limitation of viewing position and provide high-quality 3D images. We present two working modes in this system. In the spatial-sequential mode,the crosstalk is about 6%. In the time-multiplexed mode, the viewer should wear auxiliary and the crosstalk is about 1%,just next to that of a commercial 3D display(BENQ XL2707-B and View Sonic VX2268 WM). Additionally, our system is also completely compatible with active shutter glasses and its 3D resolution is same as its 2D resolution. Because of the excellent properties of the QD material, the color gamut can be widely extended to 77.98% according to the ITU-R recommendation BT.2020(Rec.2020).

Morphology and fractal characteristic of deposits formed during fiber bundle media filtration

The scanning electronic microscope and automated image analyzer are adopted to investigate the morphology of deposits formed during fiber bundle media filtration, which results in the discovery of the self—similarity of the deposits. Then in this paper it is proposed that the deposits are a fractal structure. Moreover, the fractal dimension value is related to the filter performance. The higher the fractal dimension value, the higher the filtration efficiency, and the longer filtration cycle, but the development of the head loss is also faster.

Study of the Stacking Sequences of an Irregular Mixed-Layer Illite/Smectite (I/S) Clay Mineral—with a Discussion on the Existence of Minerals with Two-Dimentional Lattice and One-Dimentional Quasi-Lattice

There are two aspects in the study of irregular mixed-layer clay minerals: one is the kinds and ratios of their basic structural unit layers and the other is the junction probabilities of the unit layers. Irregular mixed-layer illite/smectite clay minerals (I/S) are widespread in nature. While studying the clay minerals from the Permian-Triassic (P/T) boundary bed, the authors found that I/S clay minerals are developed in all P/T boundary clay layers in areas from the northwest to southeast of China. Systematic mineralogical studies of the I/S clay minerals from Hunan, Hubei, Sichuan and Zhejiang were made by means of X-ray, infrared spectroscopic, electron microscopic and chemical analyses and a deepened study of the stacking sequences of their structural unit layers was conducted by the MacEwan one—dimentional direct Fourier transform. It was found that the stacking of the illite and smectite crystal layers along the c axis can be derived from Fibonacci sequences. Hence, the authors propose that such I/S clay minerals are possessed of two—dimentional crystal lattice and one—dimentional quasicrystal lattice.