Influence of Waveguide Properties on Wave Prototypes Likely to Accompany the Dynamics of Four-Wave Mixing in Optical Fibers

In this article, we study the impacts of nonlinearity and dispersion on signals likely to propagate in the context of the dynamics of four-wave mixing. Thus, we use an indirect resolution technique based on the use of the iB-function to first decouple the nonlinear partial differential equations that govern the propagation dynamics in this case, and subsequently solve them to propose some prototype solutions. These analytical solutions have been obtained;we check the impact of nonlinearity and dispersion. The interest of this work lies not only in the resolution of the partial differential equations that govern the dynamics of wave propagation in this case since these equations not at all easy to integrate analytically and their analytical solutions are very rare, in other words, we propose analytically the solutions of the nonlinear coupled partial differential equations which govern the dynamics of four-wave mixing in optical fibers. Beyond the physical interest of this work, there is also an appreciable mathematical interest.

A New Method for In-Situ Measurement of Internal Solitary Waves Based on the Stimulated Raman Scattering in Optical Fibers

In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or temperature sensors.The high cost limits the spatial resolution,which ultimately affects the measuring accuracy of the ISW amplitude.In this paper,we developed an experimental measurement system for detecting ISWs based on the stimulated Raman scattering in distributed optical fibers.This system has the advantages of high precision,low cost,and easy operation.The experimental results show that the system is consistent with CTDs in the measurement of vertical ocean temperature variation.The spatial resolution of the system can reach 1.0 m and the measuring accuracy of temperature is 0.2℃.We successfully detected 3 ISWs by the system in the South China Sea and two optical remote sensing images collected on May 18,2021,the same day of two detected ISWs,verify the occurrence of the measured ISWs.We used the image pairs method to calculate the phase velocity of ISW and the result is 1.71 ms^(-1).By extracting the distances between wave packets,it can be found that the semi-diurnal tide generates the detected ISWs.The impact of the tidal current velocity on the ISW in amplitude is undeniable.Undoubtedly,the system has a great application prospect for detecting ISWs and other dynamic phenomena in the ocean.

Determination of Direction of Arrival of Seismic Wave by a Single Tri-axial Fiber Optic Geophone

A fiber Bragg grating (FBG) geophone and a surface seismic wave-based algorithm for detecting the direction of arrival (DOA) are described. The operational principle of FBG geophone is introduced and illustrated with systematic experimental data, demonstrating an improved FBG geophone with many advantages over the conventional geophones. An innovative, robust, and simple algorithm is developed for obtaining the bearing information on the seismic events, such as people walking, or vehicles moving. Such DOA estimate is based on the interactions and projections of surface-propagating seismic waves generated by the moving personnel or vehicles with a single tri-axial seismic sensor based on FBGs. Of particular interest is the case when the distance between the source of the seismic wave and the detector is less than or comparable to one wavelength (less than 100 m), corresponding to near-field detection, where an effective method of DOA finding lacks.

Lax pair and vector semi-rational nonautonomous rogue waves for a coupled time-dependent coefficient fourth-order nonlinear Schrodinger system in an inhomogeneous optical fiber

Optical fibers are seen in the optical sensing and optical fiber communication. Simultaneous propagation of optical pulses in an inhomogeneous optical fiber is described by a coupled time-dependent coefficient fourth-order nonlinear Schr?dinger system, which is discussed in this paper. For such a system, we work out the Lax pair, Darboux transformation, and corresponding vector semi-rational nonautonomous rogue wave solutions. When the group velocity dispersion(GVD) and fourth-order dispersion(FOD) coefficients are the constants, we exhibit the first-and second-order vector semirational rogue waves which are composed of the four-petalled rogue waves and eye-shaped breathers. Both the width of the rogue wave along the time axis and temporal separation between the adjacent peaks of the breather decrease with the GVD coefficient or FOD coefficient. With the GVD and FOD coefficients as the linear, cosine, and exponential functions, we respectively present the first-and second-order periodic vector semi-rational rogue waves, first-and second-order asymmetry vector semi-rational rogue waves, and interactions between the eye-shaped breathers and the composite rogue waves.

Analysis of errors induced by λ/4 wave plate in fiber-optic current sensor system

1/4λ wave plate is a key element in the fiber-optic current sensor system. When a retardation error or an orientation error of birefringence axes of 1/4λ wave plate with respect to the hi-bi fiber axes occurs in the 1/4λ wave plate, the sensor system will output a wrong result of the measured current. The contributions of these two errors to the final result of the whole system were studied and the errors functions were deduced by establishing the measurement function of the current sensor system with Jones matrixes of the optical elements. The results show that that the greater the orientation error or the retardation error, the larger the final error, and that these two errors cannot be compensated each other.

Photon statistics of pulse-pumped four-wave mixing in fiber with weak signal injection

We study the photon statistics of pulse-pumped four-wave mixing in fibers with weak coherent signal injection by measuring the intensity correlation functions of individual signal and idler fields. The experimental results show that the intensity correlation function of individual signal（idler） field g_（s（i））^（2） decreases with the intensity of signal injection. After applying narrow band filter in signal（idler） band, the value of g_（s（i））^（2） decreases from 1.9 ± 0.02（1.9 ± 0.02） to 1.03 ± 0.02（1.05 ± 0.02） when the intensity of signal injection varies from 0 to 120 photons/pulse. The results indicate that the photon statistics changes from Bose–Einstein distribution to Poisson distribution. We calculate the intensity correlation functions by using the multi-mode theory of four-wave mixing in fibers. The theoretical curves well fit the experimental results.Our investigation will be useful for mitigating the crosstalk between quantum and classical channels in a dense wavelength division multiplexing network.

A Portable Evanescent Wave Optic Fiber Immunosensor for Sensitive and Rapid Detection of 2,4-D in Water Samples

A portable evanescent wave optic ?ber immunosensor was developed for detection of 2,4-dichlorophenoxyacetic acid(2,4-D) using a indirect competitive immunoassay. In this paper, hapten conjugates 2,4-D-OVA were immobilized with covalent binding methods. After pre-reacting, 2,4-D-antibody-Cy5.5 in sample specifically recognized the 2,4-D antigens binding sites on surface of the optical fiber probe. Under optimum conditions, 2,4-D could be detected in less than 18 min for each assay cycle. The regeneration of the optic ?ber surface allowed more than 200 times without losing performance. The limits of detection of 0.039 ug/L and the quantitative detection range of 0.47 - 81.02 ug/L were obtained when the concentration of 2,4-D was 1 mg/L. This immunosensor shows great potential in rapid simultaneous detection of 2,4-D in waters samples.

Measuring System for Interference Optical Fiber Acoustic Emission

A type of interference optical fiber acoustic emission sensor is described.With 10 -10 m level resolution,megahertz-level frequency and response time less than 1 μs,this sensor possesses prominent measuring stability and can be used in state supervision and trouble diagnosis.

The Loss of Optical Fiber with Pure Quartz Core and Fluorine—Doped Glass Cladding

The optical fiber with pure quartz core and Fluorine-doped glass cladding was made by POD (plasma outside deposition) technique in some corporations, while we used the creative technique of “overcladding F-doped tube onto quartz rod in high temperature” to make the optical fiber which has the same structure as that from POD, in order to research and compare the influence factors on the loss of the fiber, our research work includes contrast experiments on coating polymers with different refractive index and the concentricity error of the fiber core and cladding. The measurement results show us that there are great differences in the loss spectra between the different fiber samples. We made analysis of it.

Enhancement of multiple four-wave mixing via cascaded fibers with discrete dispersion decreasing

Cascaded fiber geometry with the dispersion of each fiber decreasing is proposed to enhance the multiple four-wave mixing（FWM） generation. The first fiber with relatively large dispersion initiates and accelerates the expansion of multiple FWM, and the second fiber with small dispersion would allow the phase-matching process（thus the spectrum broadening）to keep going. Numerical and experimental results show that with this geometry not only multiple FWM expansion can be accelerated, but also the efficiency of multiple FWM products can be effectively improved with shorter fibers.

PLASMA RESONANCE FIBER OPTIC SENSOR FOR CURE MONITORING OF EPOXY COMPOSITE

The plasma resonance fiber optic sensor has a research values in theory and is widely used in engineering because of its simple structure and high sensitivity. It is a simple and sensitive method to measure the refractive index with optical fiber plasma wave. We make use of this characteristic to manufacture the plasma resonance fiber optic sensor which can detect the cure of epoxy compo site. We study the method of testing the solutions which have different refractive index with plasma resonance fiber optic sensor. A fiber optic sensing probe which has reliable performance and convenient operation for detecting the refractive index has been designed. The system for detecting the solution refractive index is developed and used to measure the refractive index of epoxy during the different phases in the cure process. Result shows that this system is credible and stable, the parameters tested are in accord with the facts.

NOVEL SPECTRUM ABSORPTION OPTICAL FIBER METHANE SENSOR

Based on spectrum principle and analyzing the infrared absorption spectrum ofmethane, a kind of optical fiber methane gas sensor and its system are developed. DFBLD(Distributedfeedback laser diode) in 1 300 nm waveband is used as illuminant and phase-detecting technology isused to carry out harmonic wave detecting the concentration of methane. The sensitivity can arriveat 10^(-5). Experiments results show that the performance targets of the sensor such as sensitivitycan basically satisfy the requests of methane detection.

Supercontinuum generated in all-normal dispersion photonic crystal fibers with picosecond pump pulses

The supercontinuum （SC） generation in all-normal dispersion （ANDi） photonic-crystal fiber （PCF） pumped by high power picosecond pulses are investigated in this paper. Our results show that an octave SC may be achieved by pumping the ANDi PCF with picosecond pump pulses. However, the PCF length required may have to be lengthened to several tens of centimeters, which is much longer than that with femtosecond pump pulses. The relatively long PCF gives rise to much higher Raman gain and stronger Raman frequency shift compared to those with femtosecond pump pulses, which in turn not only cause a distorted temporal waveform and an un-flattened spectrum, but also severely degrade the coherence of the generated SC.

Fiber Bragg Grating Pressure Sensor Based on Corrugated Diaphragm

A kind of fiber Bragg grating pressure sensor based on corrugated diaphragm is proposed. The relationship between the central wavelength of reflective wave of FBG and pressure is given, and the expression of the pressure sensitivity coefficient is also given. Within the range from 0 MPa to 0.3 MPa, the experimental pressure sensitivity is 7.83 nm/MPa, which is 2 610 times than that of the bare fiber grating. The experimental results agree with the theoretical analysis. It is indicated that the expected pressure sensitivity of the sensor can be obtained by optimizing the size and mechanical parameters of the corrugated diaphragm.

Surface Plasmon Resonance Sensors Based on Polymer Optical Fiber

Surface Plasmon Resonance （SPR） is a powerful technique for directly sensing in biological studies, chemical detection and environmental pollution monitoring. In this paper, we present polymer optical fiber application in SPR sensors, including wavelength interrogation surface enhanced Raman scattering SPR sensor and surface enhanced Raman scattering （SERS） probe. Long-period fiber gratings are fabricated on single mode polymer optical fiber （POF） with 120 μm period and 50% duty cycle. The polarization characteristic of this kind of birefringent grating is studied. Theoretical analysis shows it will be advantageous in SPR sensing applications.

分布式光纤传感技术在水力压裂中的研究进展

分布式光纤传感技术作为最新的水力压裂监测技术,应用于各大油田的水力压裂过程中,并且能够实现实时监测,已取得了显著的应用效果。为使业界进一步了解不同类型传感技术的基本原理、理论模型研究进展、现场应用情况,从分布式光纤温度传感技术和声波传感技术在水力压裂过程中的监测基本原理出发,系统总结了各类传感技术的理论模型研究进展和在产液剖面、裂缝扩展形态监测等方面的应用现状,最后提出了未来分布式光纤传感技术的发展方向。研究结果表明:①分布式光纤传感技术可以利用温度或者声波信号转换得到周围环境温度或应变的变化情况,从而实现水力压裂过程中的实时监测;②与分布式光纤声波传感技术相比,温度传感技术的相关理论模型相对较为成熟,能够实现产液剖面及裂缝形态的相关计算;③分布式光纤传感技术主要用于水力压裂过程中压裂液的注入、裂缝扩展等方面的监测。结论认为:分布式光纤传感技术可以有效地推动中国非常规储层的勘探和开发,同时提高水力压裂效果评价技术水平,这对中国油气行业的可持续发展具有重要推动作用。

声波导单模光纤中后向受激布里渊散射的声模分析

本文推导了单模光纤中的声波亥姆霍兹方程,利用分离变量法求解并获得正规声波导导模的特征方程,定义了声模的归一化频率,结合贝塞尔函数的宗量近似分析了声波模式的特征值范围、截止频率和远离截止,探讨了声模的色散和布里渊增益谱的多峰成因.研究结果表明单模光纤中纵向声波基模L01模无截止,主要被限制在纤芯中,与光基模耦合形成布里渊增益谱的主峰;高阶声模都存在低频截止,在包层分布比基模多,与LP_(01)模耦合形成布里渊增益谱的次峰.只有纵向L_(0n)声模对后向布里渊增益谱有贡献,纤芯掺锗浓度增大能使布里渊增益谱发生红移,声模数量增多,L_(01)模的增益峰值逐渐变大而高阶模的贡献减小.泵浦波长为1.55μm,纤芯掺锗浓度3.65%、纤芯半径4.2μm的单模光纤存在4个L_(0n)和16个L_(mn)(m>0)声模,声模L_(01),L_(03),L_(04)与光模LP_(01)声光耦合产生布里渊增益谱的1个主峰和2个弱峰;纤芯掺锗浓度15%,纤芯半径1.3μm的单模光纤存在3个L_(0n)模和7个L_(mn)(m>0)模,L_(01),L_(02),L_(03)模与LP_(01)模声光耦合使得布里渊增益谱呈现3个主峰.这些结论可以完全解释相应的实验现象,也为光纤SBS声波导研究及应用提供理论参考.

飞行器结构健康监测技术研究进展

结构健康监测技术有望在飞行器设计、服役和维护中发挥关键作用,提高飞行器结构效率,确保飞行器结构的安全性和可靠性。本文首先概述结构健康监测的基本概念及其适用范围,强调其在航空航天领域中的重要性。随后,针对结构健康监测技术在飞行器典型结构中的研究工作情况,重点围绕冲击监测、超声导波损伤监测以及光纤传感器应变监测等先进技术进行详细讨论,总结国内外研究现状、技术能力以及典型应用。最后,指出飞行器结构健康监测面临的挑战性问题,展望该技术在航空航天领域的应用前景。

基于Evanescent Wave吸收的光纤传感器灵敏度计算分析

基于Evanescent Wave吸收的U形光纤传感器是比较便于实用推广,可被用于化学传感的新型传感器。对于U形光纤传感器的渐逝波穿透深度和灵敏度进行了计算与分析,并与普通直线传感器做了比较,具体讨论了影响U形传感器灵敏度的几何参数因素和灵敏度优化公式。

外调制倍频光生毫米波技术的研究进展

目前,随着光电子芯片技术的高速发展,高频毫米波通信已成为目前宽带接入网络中的重要发展技术;因为采用外调制倍频方案的光生毫米波系统兼具收发毫米波信号的高效性和稳定性,且能充分利用现有电信网络中的光纤资源,因此,在实际中具备潜在应用价值。综述了光生毫米波倍频基本原理、典型倍频仿真或实验方案及其相关测试结果的研究进展;考虑到马赫-曾德尔调制器(Mach-Zehnder Modulator,MZM)作为倍频光生毫米波的关键电光器件,因此,分析了其中的关键工作参数;最后,对光载无线通信(Radio over Fiber,RoF)系统中光生毫米波技术的应用前景进行了展望。