Effects of Fiber Volume Fraction on Damping Properties of Three-Dimensional and Five-Directional Braided Composites

The effects of fiber volume fraction on damping properties of carbon fiber three-dimensional and five-directional( 3D-5Dir)braided carbon fiber / epoxyres in composite cantilever beams were studied by experimental modal analysis method. Meanwhile,carbon fiber plain woven laminated / epoxy resin composites with different fiber volume fraction were concerned for comparison. The experimental result of braided specimens shows that the first three orders of natural frequency increase and the first three orders of the damping ratios of specimens decrease, when the fiber volume fraction increases. Furthermore,larger fiber volume fraction will be valuable for the better anti-exiting property of braided composites,and get an opposite effect on dissipation of vibration energy. The fiber volume fraction is an important factor for vibration performance design of braided composites. The comparison between the braided specimens and laminated specimens reveals that 3D braided composites have a wider range of damping properties than laminated composites with the same fiber volume fractions.

Using Acoustic Emissions to Detect Damage in Three-Dimensional Braided Composites

Three-dimensional(3D)braided composites with better properties have been used in some particular industries.Some have had obvious signs of crack when they are braided.Others have had catastrophic failures occuring without warning.A new methodology for the analysis of failure modes in composite materials by means of acoustic emission techniques has been developed.The occurrence of fiber-breakage during tensile loading tests has been observed by the acoustic emission technology.Using acoustic emission technology is investigated as a means of monitoring 3D braided composites structures,detecting damage,and predicting impending damage.Some of the findings of the research project were presented.

Theoretical prediction of stiffness and strength of three-dimensional and four-directional braided composites

Based on unit cell model, the 3D 4-directional braided composites can be simplified as unidirectional composites with different local axial coordinate system and the compliance matrix of unidirectional composites can be defined utilizing the bridge model. The total stiffness matrix of braided composites can be obtained by the volume average stiffness of unidirectional composites with different local axial coordinate system and the engineering elastic constants of braided composites were computed further. Based on the iso-strain assumption and the bridge model, the stress distribution of fiber bundle and matrix of different unidirectional composites can be determined and the tensile strength of 3D 4-directional braided composites was predicted by means of the Hoffman＇s failure criterion for the fiber bundle and Mises＇ failure criterion for the matrix.

INCLINED LAMINAL COMBINATION MODEL OF 3D BRAIDED COMPOSITES

As an advanced composite material, the 3D braided composite has received more and more attention in foreign countries. However, it has received less attention in China. The geometric unit cell which can describe the basic structure and the relationship between the braiding angle and geometric parameters of the fabric and fiber volume ratio are given in this paper based on two 3D braiding processes, namely, the four-step and the twostep ones. Several existing mechanical models to predict groperties of the 3D braided comPOsites are discussed and their shortcomings are pointed out herein. Then a new model called the inclined laminal combination model is proposed, which is based on the classical laminated plate theory and can predict the basic mechanical behavior of the two 3D braided composites with four-step or two-step braid. In the model, each yarn in the unit cell is regarded as an inclined laminate and then a 3D analysis is performed. It is found that the predicted mechanical properties of the 3D braided composites by the proposed model are compared well with the experimental data.

Microstructure Analysis of 4-Step Three-Dimensional Braided Composite

The yarn architecture of 3-D braided composites products by the four-step 1×1 braiding technique has been studied by means of a control volume method in conjunction with experimental investigation and a numerical method, respectively. An ellipse assumption for the cross-section of yarn was proposed in this analysis method with considering the yarn size and yarn-packing factor. Two types of local unit cell structures were identified for 4-step braided composites by considering the nature of the braiding processes and by observing the sample cross-sections. The relationship between the braiding procedure and the properties for 3-D braided structural shapes was established. This method provides the basis for analyzing stiffness and strength of 3-D braided composites.

Effective Thermal Conductivity for 3D Five-Directional Braided Composites Based on Microstructural Analysis

A method for predicting effective thermal conductivities(ETCs) of three-dimensional five-directional(3D5D) braided composites is presented. The effective thermal conductivity prediction method contains a digital image processing technology. Multiple scanning electron microscopy(SEM)images of composites are analyzed to obtain actual microstructural features. These actual microstructural features of 3D5D braided composites are introduced into representative volume element(RVE) modeling. Apart from applying actual microstructural features,compression effects between yarns are considered in the modeling of RVE,making the RVE more realistic. Therefore,the ETC prediction method establishes a representative unit cell model that better reflects the true microstructural characteristics of the 3D5D braided composites. The ETCs are predicted with the finite element method. Then thermal conductivity measurements are carried out for a 3D5D braided composite sample.By comparing the predicted ETC with the measured thermal conductivity, the whole process of the ETC prediction method is proved to be effective and accurate,where a relative error of only 2.9 % is obtained.Furthermore,the effects of microstructural features are investigated,indicating that increasing interior braiding angles and fiber fill factor can lead to higher transverse ETCs. Longitudinal ETCs decrease with increasing interior braiding angles,but increase with increasing fiber fill factor. Finally,the influence of variations of microstructure parameters observed in digital image processing are investigated. To explore the influence of variations in microstructural features on variations in predicted ETCs,the actual probability distributions of microstructural features obtained from the 3D5D braided composite sample are introduced into the ETC investigation. The results show that,compared with the interior braiding angle,variations in the fiber fill factor exhibit more significant effects on variations in ETCs.

Yarn Architecture Analysis of Two-step 3D Braided Composites

A comprehensive study of yarn architecture of two-step rectangle 3D braided composites is presented. Firstly, the braided surface, the shapes of yarns and the intertwining between braider yams and axial yams are analyzed from experimentation. With the microstructure being defined, three levels of unit cell structure are identified, i.e. large unit cell, second unit cell and minimal unit cell. Secondly, based on the minimal unit cell in the interior and on the boundary of the entire cross-section, the deformations of axial yams squashed by braider yams contribute to the increase of the fiber packing factors of axial yams. Finally, the predicted fiber volume fraction of the composites decreases with the increase of linear density of the braider yam and the pitch length. Favorable correlations between the predicted and the experimental results arc found for six groups of the composites.

Electrical⁃Mechanical Coupling Behaviors and Thermal⁃Resistance Effects of 3D Braided Composites

Electrical-mechanical coupling behaviors and thermal-resistance effects of 3D braided composites under external loads are important for structural health monitoring(SHM). Electrical conductivity and electrical-mechanical coupling behaviors of 3D braided carbon fiber/epoxy composites under uniaxial tension were reported. It was found that the transverse resistance decreased and the axial resistance increased with the increasing braiding angle. The fractional change in resistance increased linearly as the strain was below 1.0%, and the nonlinearity appeared when the strain exceeded 1.0%. The negative temperature coefficient(NTC) effect was observed before the glass transition temperature Tg of epoxy resin, while there was a positive temperature coefficient(PTC) effect after Tg.

Statistical Model of the 3-D Braided Composites Strength

Based on the statistical model for the tensile statistical strength of unidirectional composite materials and the stress analysis of 3-D braided composites, a new method is proposed to calculate the tensile statistical strength of the 3-D braided compos- ites. With this method, the strength of 3-D braided composites can be calculated with very large accuracy, and the statistical parameters of 3-D braided composites can be determined. The numerical result shows that the tensile statistical strength of 3-D braided composites can be predicted using this method.

Three-dimensional stability calculation method for high and large composite slopes formed by mining stope and inner dump in adjacent open pits

The 2D limit equilibrium method is widely used for slope stability analysis.However,with the advancement of dump engineering,composite slopes often exhibit significant 3D mechanical effects.Consequently,it is of significant importance to develop an effective 3D stability calculation method for composite slopes to enhance the design and stability control of open-pit slope engineering.Using the composite slope formed by the mining stope and inner dump in Baiyinhua No.1 and No.2 open-pit coal mine as a case study,this research investigates the failure mode of composite slopes and establishes spatial shape equations for the sliding mass.By integrating the shear resistance and sliding force of each row of microstrip columns onto the bottom surface of the strip corresponding to the main sliding surface,a novel 2D equivalent physical and mechanical parameters analysis method for the strips on the main sliding surface of 3D sliding masses is proposed.Subsequently,a comprehensive 3D stability calculation method for composite slopes is developed,and the quantitative relationship between the coordinated development distance and its 3D stability coefficients is examined.The analysis reveals that the failure mode of the composite slope is characterized by cutting-bedding sliding,with the arc serving as the side interface and the weak layer as the bottom interface,while the destabilization mechanism primarily involves shear failure.The spatial form equation of the sliding mass comprises an ellipsoid and weak plane equation.The analysis revealed that when the coordinated development distance is 1500 m,the error rate between the 3D stability calculation result and the 2D stability calculation result of the composite slope is less than 8%,thereby verifying the proposed analytical method of equivalent physical and mechanical parameters and the 3D stability calculation method for composite slopes.Furthermore,the3D stability coefficient of the composite slope exhibits an exponential correlation with the coordinated development distance,with the coefficient gradually decreasing as the coordinated development distance increases.These findings provide a theoretical guideline for designing similar slope shape parameters and conducting stability analysis.

Tensile Properties of 3-Dimension-4-directional Braided C_f/Si C Composite based on Double-scale Model

The longitude tensile properties of 3-Dimension-4-directional（3D-4d） braided C/Si C composites（CMCs） were investigated with the help of a double scale model. This model involves micro-scale and unit-cell scale. In micro-scale, the tensile properties of fiber tows which involves matrix cracking, interfacial debonding, and fiber failure are studied. The unit-cell scale model can reflect the braided structure and simulate the tensile properties of 3D-4d CMCs by introducing the tensile properties of fiber tows into it. Quasi-static tensile tests of 3D-4d braided CMCs were performed on a PWS-100 test system. The predicted tensile stressstrain curve by the double scale model is in good agreement with that of the experimental results.

Mechanical Properties of Three-Dimensional Fabric Sandwich Composites

Three-dimensional( 3 D) fabric composite is a newly developed sandwich structure,consisting of two identical parallel fabric decks woven integrally and mechanically together by means of vertical woven fabrics. In this paper,six types of 3 D fabric sandwich composites were developed in terms of compressive and flexural properties as a function of pile height( 10, 20 and30 mm) and pile distance( 16, 24 and 32 mm) in pile structures. The mechanical characteristics and the damage modes of the 3 D fabric sandwich composites under compressive and flexural load conditions were investigated. Besides,the influence of pile height and pile distance on the 3 D fabric sandwich composites mechanical properties was analyzed. The results showed that the compressive properties decreased with the increase of the pile height and the pile distance. Flexural properties increased with the increase of pile height, while decreased with the increase of pile distance.

Elastic Modulus Prediction of Three-dimension-4 Directional Braided C_f/SiC Composite Based on Double-scale Model

Double-scale model for three-dimension-4 directional（3D-4d） braided C/SiC composites has been proposed to investigate its elastic properties. The double-scale model involves micro-scale that takes fiber/ matrix/porosity in fibers tows into consideration with unit cell which considers the 3D-4d braiding structure. Micro-optical photographs of composites have been taken to study the braided structure. Then a parameterized finite element model that reflects the structure of 3D-4d braided composites is proposed. Double-scale elastic modulus prediction model is developed to predict the elastic properties of 3D-4d braided C/SiC composites. Stiffness and eompliance-averaging method and energy method are adopted to predict the elastic properties of composites. Static-tension experiments have been conducted to investigate the elastic modulus of 3D-4d braided C/SiC composites. Finally, the effect of micro-porosity in fibers tows on the elastic modulus of 3D-4d braided C/SiC composites has been studied. According to the conclusion of this thesis, elastic modulus predicted by energy method and stiffness-averaging method both find good agreement with the experimental values, when taking the micro-porosity in fibers tows into consideration. Differences between the theoretical and experimental values become smaller.

Effects of Microstructure on Quasi⁃Static Transverse Loading Behavior of 3D Circular Braided Composite Tubes

The effects of microstructure on quasi-static transverse loading behavior of 3D circular braided composite tubes were studied. Transverse loading tests were conducted. Transverse load-deflection curves were obtained to analyze the effects of braiding parameters including the braiding angle, the wall thickness, and the diameter on the transverse loading of 3D circular braided composite tubes. Breaking loads, moduli and strengths had also been used to describe the transverse loading behaviors. The failure morphologies were shown to reveal damage mechanisms. From the results, the increase in braiding angle, wall thickness and diameter increases the ability of anti-deformation and breaking load of braided tubes. The breaking load of specimen with a braiding angle of 45° is about 1.68 times that of specimen with a braiding angle of 15°. The breaking load of specimen with 4 layers of yarns is about 2.15 times that of specimen with 2 layers of yarns. The breaking load of the tube with a diameter of 25.5 mm is about 2.39 times that of the tube with a diameter of 20.5 mm.

Defects Recognition of 3D Braided Composite Based on Dual-Tree Complex Wavelet Packet Transform

Textile-reinforced composites,due to their excellent highstrength-to-low-mass ratio, provide promising alternatives to conventional structural materials in many high-tech sectors. 3D braided composites are a kind of advanced composites reinforced with 3D braided fabrics; the complex nature of 3D braided composites makes the evaluation of the quality of the product very difficult. In this investigation,a defect recognition platform for 3D braided composites evaluation was constructed based on dual-tree complex wavelet packet transform( DT-CWPT) and backpropagation( BP) neural networks. The defects in 3D braided composite materials were probed and detected by an ultrasonic sensing system. DT-CWPT method was used to analyze the ultrasonic scanning pulse signals,and the feature vectors of these signals were extracted into the BP neural networks as samples. The type of defects was identified and recognized with the characteristic ultrasonic wave spectra. The position of defects for the test samples can be determined at the same time. This method would have great potential to evaluate the quality of 3D braided composites.

A NEW APPROACH TO MANUFACTURING 3D WOVEN PREFORMS USED FOR STRUCTURAL COMPOSITES

The manufacturing of three-dimensional textile preforms used for composites started to re-ceive much attention in the last decade.The major barriers to accelerating the transition from thelamination of two-dimensional fabrics to manufacturing integral three-dimensional near-netshaped textile preforms are high cost and database deficiency.To reduce the cost of weaving three-dimensional preforms,and make full use of the potential of conventional looms,a rig was designedwhich can convert two-dimensional woven fabric to particular three-dimensional preforms wherethe yarn is orientated in the directions of maximum stress.

Composite bioabsorbable vascular stents via 3D bio-printing and electrospinning for treating stenotic vessels

A new type of vascular stent is designed for treating stenotic vessels. Aiming at overcoming the shortcomings of existing equipment and technology for preparing a bioabsorbable vascular stent （BVS）, a new method which combines 3D bio-printing and electrospinning to prepare the composite bioabsorbable vascular stent （CBVS） is proposed. The inner layer of the CBVS can be obtained through 3D bio- printing using poly-p-dioxanone （PPDO）. The thin nanofiber film that serves as the outer layer can be built through electrospinning using mixtures of chitosan-PVA （poly （vinyl alcohol））. Tests of mechanical properties show that the stent prepared through 3D bio-printing combined with electrospinning is better than that prepared through 3D bio- printing alone. Cells cultivated on the CBVS adhere and proliferate better due to the natural, biological chitosan in the outer layer. The proposed complex process and method can provide a good basis for preparing a controllable drug-carrying vascular stent. Overall, the CBVS can be a good candidate for treating stenotic vessels.

A New Scheme and Microstructural Model for 3D Full 5-directional Braided Composites

Three-dimensional（3 D）braided composites are a kind of advanced ones and are used in the aeronautical and astronautical fields more widely. The advantages, usages, shortages and disadvantages of 3D braided composites are analyzed, and the possible approach of improving the properties of the materials is presented, that is, a new type of 3D full 5-directional braided composites is developed. The methods of making this type of preform are proposed. It is pointed out that the four-step braiding which is the most possible to realize industrialized production almost has no effect on the composites＇ properties. By analyzing the simulation model,the advantages of the material compared with the 3D 4-directional and 5-directional materials are presented. Finally, a microstructural model is analyzed to lay the foundation for the future theoretical analysis of these composites.

Numerical simulation on thermal expansion coefficient of 3D braided C/C composites

To effectively get the thermal expansion coef- ficient （CTE） of three-dimensional （3D） braided C/C composites and study the variations, a VC＋＋ program with graphical user interfaces was obtained, based on the yam unit model and numerical analysis. With the limited basic properties of carbon fibers and carbon matrix, CTE of 3D braided C/C composites is obtained at 85 ~C. The deviation between the simulated and exl^erimental axial CTE of 3D braided C/C composites is no more than 11%. The effects of different parameters （including the braiding angle of 3D braided preform, the fiber volume fraction and the porosity of 3D braided C/C composites, and the elastic modulus, Poisson＇s ratio and CTEs of carbon fibers and carbon matrix） were analyzed with the program. The results show that the axial CTE of C/C composites decreases with the increase of the braiding angle, the fiber volume fraction, and the porosity of 3D braided C/C composites. The transverse elastic modulus of carbon fibers has the greatest effect on the axial CTE among the studied mechanical parameters, followed by the elastic modulus and Poisson＇s ratio of carbon matrix.

Damage Simulation for 3D Braided Composites by Homogenization Method

In order to study the failure patterns and strength of 3D braided composites from the microscopic view, the damage propagation under tensile loading steps in three kinds of unit cells is simulated. The homogenization formula of micro-stress and the solving approach of finite element method are given firstly. A criterion is presented to determine the damage and its pattern of each element, and then the stiffness degradation method based on Murakami's geometric damage theory is used to simulate the status of damage under tensile loading steps for three kinds of unit cells. It can be seen that the damage percentage and damage pattern of damaged unit cell are totally different for different kind of unit cells. More damaged elements are observed for face cell and corner cell than that for body cell. It is also observed that the damage firstly occurs at the area of face cell, which agrees well with experimental results. It is verified that considering the effects of face and corner cells are important for the damage and strength analysis of 3D braided composites.