Shear behavior of intact granite under thermo-mechanical coupling and three-dimensional morphology of shear-formed fractures

The shear failure of intact rock under thermo-mechanical(TM)coupling conditions is common,such as in enhanced geothermal mining and deep mine construction.Under the effect of a continuous engineering disturbance,shear-formed fractures are prone to secondary instability,posing a severe threat to deep engineering.Although numerous studies regarding three-dimensional(3D)morphologies of fracture surfaces have been conducted,the understanding of shear-formed fractures under TM coupling conditions is limited.In this study,direct shear tests of intact granite under various TM coupling conditions were conducted,followed by 3D laser scanning tests of shear-formed fractures.Test results demonstrated that the peak shear strength of intact granite is positively correlated with the normal stress,whereas it is negatively correlated with the temperature.The internal friction angle and cohesion of intact granite significantly decrease with an increase in the temperature.The anisotropy,roughness value,and height of the asperities on the fracture surfaces are reduced as the normal stress increases,whereas their variation trends are the opposite as the temperature increases.The macroscopic failure mode of intact granite under TM coupling conditions is dominated by mixed tensileeshear and shear failures.As the normal stress increases,intragranular fractures are developed ranging from a local to a global distribution,and the macroscopic failure mode of intact granite changes from mixed tensileeshear to shear failure.Finally,3D morphological characteristics of the asperities on the shear-formed fracture surfaces were analyzed,and a quadrangular pyramid conceptual model representing these asperities was proposed and sufficiently verified.

3D Modeling and Simulation of Fancy Fabrics in Weft Knitting

Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper, 3D loop geometrical models of weft knitted fancy structures, including tuck stitch, jacquard stitch, transfer stitch and fleecy stitch, were developed based on an improved model of plain loop, and their central axes as some 3D space curves were achieved by using Non-Uniform Rational B-Splines (NURBS). The 3D visual simulation programme was written in C++ programming language using OpenGL, which was a function library of 3D graphics. Some examples of weft knitted fancy fabrics were generated and practical application of 3D simulation was discussed.

Three-Dimensional Model Reconstruction of Nonwovens from Multi-Focus Images

The three-dimensional(3D)model is of great significance to analyze the performance of nonwovens.However,the existing modelling methods could not reconstruct the 3D structure of nonwovens at low cost.A new method based on deep learning was proposed to reconstruct 3D models of nonwovens from multi-focus images.A convolutional neural network was trained to extract clear fibers from sequence images.Image processing algorithms were used to obtain the radius,the central axis,and depth information of fibers from the extraction results.Based on this information,3D models were built in 3D space.Furthermore,self-developed algorithms optimized the central axis and depth of fibers,which made fibers more realistic and continuous.The method with lower cost could reconstruct 3D models of nonwovens conveniently.

Super-resolution amplification of bitmap images based on 3D modeling theory

As a general format of the image,bitmap(BMP)image has wide applications,and consequently it is an important part of image processing.By segmenting the bitmap and combining the three-dimesional(3D)model of the discrete algorithm with the scanning line compensation algorithm,a mathematical model is built.According to the topological relations between several control points on the model surface,the surface of the model is discretized,and a planar triangle sequence is used to describe 3D objects.Finally,the bitmap is enlarged by combining the borrowing compensation based on 3D modeling principle of discrete algorithm with the scanning line compensation algorithm of binary lattice image,thus getting a relatively clear enlarged BMP image.

3D modeling of Unmanned Aerial Vehicles Tilt Photogrammetry

Unmanned Aerial Vehicles(UAV)tilt photogrammetry technology can quickly acquire image data in a short time.This technology has been widely used in all walks of life with the rapid development in recent years especially in the rapid acquisition of high-resolution remote sensing images,because of its advantages of high efficiency,reliability,low cost and high precision.Fully using the UAV tilt photogrammetry technology,the construction image progress can be observed by stages,and the construction site can be reasonably and optimally arranged through three-dimensional modeling to create a civilized,safe and tidy construction environment.

Effect of the mineral spatial distribution heterogeneity on the tensile strength of granite:Insights from PFC3D-GBM numerical analysis

The mechanical characteristics of crystalline rocks are affected by the heterogeneity of the spatial distribution of minerals.In this paper,a novel three-dimensional(3D)grain-based model(GBM)based on particle flow code(PFC),i.e.PFC3D-GBM,is proposed.This model can accomplish the grouping of mineral grains at the 3D scale and then filling them.Then,the effect of the position distribution,geometric size,and volume composite of mineral grains on the cracking behaviour and macroscopic properties of granite are examined by conducting Brazilian splitting tests.The numerical results show that when an external load is applied to a sample,force chains will form around each contact,and the orientation distribution of the force chains is uniform,which is independent of the external load level.Furthermore,the number of high-strength force chains is proportional to the external load level,and the main orientation distribution is consistent with the external loading direction.The main orientation of the cracks is vertical to that of the high-strength force chains.The geometric size of the mineral grains controls the mechanical behaviours.As the average grain size increases,the number of transgranular contacts with higher bonding strength in the region connecting both loading points increases.The number of high-strength force chains increases,leading to an increase in the stress concentration value required for the macroscopic failure of the sample.Due to the highest bonding strength,the generation of transgranular cracks in quartz requires a higher concentrated stress value.With increasing volume composition of quartz,the number of transgranular cracks in quartz distributed in the region connecting both loading points increases,which requires many high-strength force chains.The load level rises,leading to an increase in the tensile strength of the numerical sample.

The quaternion beam model for hard-magnetic flexible cantilevers

The recently developed hard-magnetic soft(HMS)materials manufactured by embedding high-coercivity micro-particles into soft matrices have received considerable attention from researchers in diverse fields,e.g.,soft robotics,flexible electronics,and biomedicine.Theoretical investigations on large deformations of HMS structures are significant foundations of their applications.This work is devoted to developing a powerful theoretical tool for modeling and computing the complicated nonplanar deformations of flexible beams.A so-called quaternion beam model is proposed to break the singularity limitation of the existing geometrically exact(GE)beam model.The singularity-free governing equations for the three-dimensional(3D)large deformations of an HMS beam are first derived,and then solved with the Galerkin discretization method and the trustregion-dogleg iterative algorithm.The correctness of this new model and the utilized algorithms is verified by comparing the present results with the previous ones.The superiority of a quaternion beam model in calculating the complicated large deformations of a flexible beam is shown through several benchmark examples.It is found that the purpose of the HMS beam deformation is to eliminate the direction deviation between the residual magnetization and the applied magnetic field.The proposed new model and the revealed mechanism are supposed to be useful for guiding the engineering applications of flexible structures.

Numerical analysis of the failure process of soil-rock mixtures through computed tomography and PFC3D models

Soil-rock mixture （SRM） is a unique type of geomaterial characterized by a heterogeneous composition and a complicated structure. It is intractable for the continuum-based soil and rock mechanics theories to accurately characterize and predict the SRM＇s mechanical properties. This study reports a novel numerical method incorporating microfocus computed tomography and PFC3D codes to probe the deformation and failure processes of SRM. The three-dimensional （3D） PFC models that represent the SRM＇s complex structures were built. By simulating the entire failure process in PFC3D, the SRM＇s strength, elastic modulus and crack growth were obtained. The influence of rock ratios on the SRM＇s strength, deformation and failure processes, as well as its internal mesoscale mechanism, were analyzed. By comparing simulation results with experimental data, it was verified that the 3D PFC models were in good agreement with SRM＇s real structure and the SRM＇s compression process, deformation and failure patterns; its intrinsic mesomechanism can be effectively analyzed based on such 3D PFC models.

Spatial distribution modeling of subsurface bedrock using a developed automated intelligence deep learning procedure:A case study in Sweden

Due to associated uncertainties,modelling the spatial distribution of depth to bedrock(DTB) is an important and challenging concern in many geo-engineering applications.The association between DTB,the safety and economy of design structures implies that generating more precise predictive models can be of vital interest.In the present study,the challenge of applying an optimally predictive threedimensional(3D) spatial DTB model for an area in Stockholm,Sweden was addressed using an automated intelligent computing design procedure.The process was developed and programmed in both C++and Python to track their performance in specified tasks and also to cover a wide variety of diffe rent internal characteristics and libraries.In comparison to the ordinary Kriging(OK) geostatistical tool,the superiority of the developed automated intelligence system was demonstrated through the analysis of confusion matrices and the ranked accuracies of different statistical errors.The re sults showed that in the absence of measured data,the intelligence models as a flexible and efficient alternative approach can account for associated uncertainties,thus creating more accurate spatial 3D models and providing an appropriate prediction at any point in the subsurface of the study area.

Three-dimensional experimental study of loose top-coal drawing law for longwall top-coal caving mining technology

Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.

Spatiotemporal model of open-pit based on 3-D deposit model

A new method was put forward to make up the three-dimensional deposit model, and the spatiotemporal models of open-pit with temporal dynamics were also studied combined with the corrected models of multilevel ground states so as to bring the three-dimensional open-pit model at different time and its model serial formed from the evolvement into the management of temporal dimension in order to realize the spatial three-dimension and temporal dynamic for the mining management in open-pits,which makes this model easy to query and analyze 3-D information, also help surface mining replaying and stope evolution forecasting. Finally, the time-spatial model was established to show the dynamic mining on some open-pit under the windows XP and VC++ environment.

Application of Digital Technology in Road and Bridge Design

With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to today’s digital software design era.Early designers relied on hand-drawn paper design forms which was time-consuming and error-prone.Digital support for road and bridge design not only saves the design time but the design quality has also achieved a qualitative leap.This paper engages in the application of digital technology in road and bridge design,to provide technical reference for China’s road and bridge engineering design units,to promote the popularity of Civil3D and other advanced design software in the field of engineering design and development,ultimately contributing to the sustainable development of China’s road and bridge engineering.

Modeling time-dependent mechanical behavior of hard rock considering excavation-induced damage and complex 3D stress states

To investigate the long-term stability of deep rocks,a three-dimensional(3D)time-dependent model that accounts for excavation-induced damage and complex stress state is developed.This model comprises three main components:a 3D viscoplastic isotropic constitutive relation that considers excavation damage and complex stress state,a quantitative relationship between critical irreversible deformation and complex stress state,and evolution characteristics of strength parameters.The proposed model is implemented in a self-developed numerical code,i.e.CASRock.The reliability of the model is validated through experiments.It is indicated that the time-dependent fracturing potential index(xTFPI)at a given time during the attenuation creep stage shows a negative correlation with the extent of excavationinduced damage.The time-dependent fracturing process of rock demonstrates a distinct interval effect of the intermediate principal stress,thereby highlighting the 3D stress-dependent characteristic of the model.Finally,the influence of excavation-induced damage and intermediate principal stress on the time-dependent fracturing characteristics of the surrounding rocks around the tunnel is discussed.

软件工程化方法在武器3D实体建模中的应用研究

针对复杂武器3D实体建模的需求,分析并比较了软件工程化中的瀑布模型、变换模型和增量模型等3种模型开发方法,首次将增量模型方法引入到武器3D实体建模中。基本思路是,首先根据需求分析得到的信息将武器3D实体模型划分为不同的增量构件,然后对增量构件进行详细设计并完成基于MultiGen Creator的构件开发与测试,最后进行增量构件组装和模型测试。结果表明,应用该方法有利于提高模型的可重用性和开发效率,同时使开发的模型满足视景仿真系统的逼真性和实时性的要求。

Deep3DSketch-im:rapid high-fidelity AI 3D model generation by single freehand sketches

The rise of artificial intelligence generated content(AIGC)has been remarkable in the language and image fields,but artificial intelligence(AI)generated three-dimensional(3D)models are still under-explored due to their complex nature and lack of training data.The conventional approach of creating 3D content through computer-aided design(CAD)is labor-intensive and requires expertise,making it challenging for novice users.To address this issue,we propose a sketch-based 3D modeling approach,Deep3DSketch-im,which uses a single freehand sketch for modeling.This is a challenging task due to the sparsity and ambiguity.Deep3DSketch-im uses a novel data representation called the signed distance field(SDF)to improve the sketch-to-3D model process by incorporating an implicit continuous field instead of voxel or points,and a specially designed neural network that can capture point and local features.Extensive experiments are conducted to demonstrate the effectiveness of the approach,achieving state-of-the-art(SOTA)performance on both synthetic and real datasets.Additionally,users show more satisfaction with results generated by Deep3DSketch-im,as reported in a user study.We believe that Deep3DSketch-im has the potential to revolutionize the process of 3D modeling by providing an intuitive and easy-to-use solution for novice users.

The new era of cardiovascular research:revolutionizing cardiovascular research with 3D models in a dish

Cardiovascular research has heavily relied on studies using patient samples and animal models.However,patient studies often miss the data from the crucial early stage of cardiovascular diseases,as obtaining primary tissues at this stage is impracticable.Transgenic animal models can offer some insights into disease mechanisms,although they usually do not fully recapitulate the phenotype of cardiovascular diseases and their progression.In recent years,a promising breakthrough has emerged in the form of in vitro three-dimensional(3D)cardiovascular models utilizing human pluripotent stem cells.These innovative models recreate the intricate 3D structure of the human heart and vessels within a controlled environment.This advancement is pivotal as it addresses the existing gaps in cardiovascular research,allowing scientists to study different stages of cardiovascular diseases and specific drug responses using human-origin models.In this review,we first outline various approaches employed to generate these models.We then comprehensively discuss their applications in studying cardiovascular diseases by providing insights into molecular and cellular changes associated with cardiovascular conditions.Moreover,we highlight the potential of these 3D models serving as a platform for drug testing to assess drug efficacy and safety.Despite their immense potential,challenges persist,particularly in maintaining the complex structure of 3D heart and vessel models and ensuring their function is comparable to real organs.However,overcoming these challenges could revolutionize cardiovascular research.It has the potential to offer comprehensive mechanistic insights into human-specific disease processes,ultimately expediting the development of personalized therapies.

Simulating the in vivo tumor microenvironment-advances in building a vascularized model of hepatocellular carcinoma through 3D bioprinting

Over the past decade,there has been notable progress in the systemic treatment of liver cancer.However,despite the emergence of new therapeutic strategies,they have not universally achieved success,with patients afflicted by liver diseases frequently displaying resistance to these treatments(1).Consequently,liver cancer remains a global health challenge,and hepatocellular carcinoma(HCC)stands as the fourth most common cause of cancer-related deaths globally,constituting 80-90%of primary liver cancer cases(2,3).This poses a substantial threat to both the survival and overall well-being of individuals.

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.

3D Analysis and Investigation of Traffic Noise Impact from Hemmat Highway Located in Tehran on Buildings and Surrounding Areas

This study analyzes and investigates the impact of traffic noise on high rise buildings and surrounding areas by the side of Hemmat Highway that links west of Tehran to the east. In this study, a 3D traffic noise simulation model is applied on a GIS system. Visualized noise levels are formulated by the proposed model for noise mapping on all surfaces of the buildings and surrounding ground in a 3D platform. The investigation shows that there is a high traffic noise impact on the foreground and front facades of buildings, rendering these areas unsuitable for residential purposes. The ground area by the sides of buildings and the building side panels receive a lower noise impact. Most of these areas are still not acceptable for residential and even commercial use, only the back yards and back panels, have the lowest traffic noise impact. It also shows that the building height is not an effective factor for reducing motorway noise on the upper part of the building. Finally, construction cantilever barriers with a height of seven meters, close to the outer edge of the highway was presented as an effective way to reduce noise within the allowable range of noise pollution for commercial and residential purposes.

3D numerical simulation of avascular tumour growth:effect of hypoxic micro-environment in host tissue

A three-dimensional （3D） mathematical model of tumour growth at the avascular phase and vessel remodelling in host tissues is proposed with emphasis on the study of the interactions of tumour growth and hypoxic micro-environment in host tissues. The hybrid based model includes the continuum part, such as the distributions of oxygen and vascular endothelial growth factors （VEGFs）, and the discrete part of tumour cells （TCs） and blood vessel networks. The simulation shows the dynamic process of avascular tumour growth from a fewinitial cells to an equilibrium state with varied vessel networks. After a phase of rapidly increasing numbers of the TCs, more and more host vessels collapse due to the stress caused by the growing tumour. In addition, the consumption of oxygen expands with the enlarged tumour region. The study also discusses the effects of certain factors on tumour growth, including the density and configuration of pre- existing vessel networks and the blood oxygen content. The model enables us to examine the relationship between early tumour growth and hypoxic micro-environment in host tissues, which can be useful for further applications, such as tumour metastasis and the initialization of tumour angiogenesis.