Microstructure Analysis of 4-Step Three-Dimensional Braided Composite

The yarn architecture of 3-D braided composites products by the four-step 1×1 braiding technique has been studied by means of a control volume method in conjunction with experimental investigation and a numerical method, respectively. An ellipse assumption for the cross-section of yarn was proposed in this analysis method with considering the yarn size and yarn-packing factor. Two types of local unit cell structures were identified for 4-step braided composites by considering the nature of the braiding processes and by observing the sample cross-sections. The relationship between the braiding procedure and the properties for 3-D braided structural shapes was established. This method provides the basis for analyzing stiffness and strength of 3-D braided composites.

Effects of Fiber Volume Fraction on Damping Properties of Three-Dimensional and Five-Directional Braided Composites

The effects of fiber volume fraction on damping properties of carbon fiber three-dimensional and five-directional( 3D-5Dir)braided carbon fiber / epoxyres in composite cantilever beams were studied by experimental modal analysis method. Meanwhile,carbon fiber plain woven laminated / epoxy resin composites with different fiber volume fraction were concerned for comparison. The experimental result of braided specimens shows that the first three orders of natural frequency increase and the first three orders of the damping ratios of specimens decrease, when the fiber volume fraction increases. Furthermore,larger fiber volume fraction will be valuable for the better anti-exiting property of braided composites,and get an opposite effect on dissipation of vibration energy. The fiber volume fraction is an important factor for vibration performance design of braided composites. The comparison between the braided specimens and laminated specimens reveals that 3D braided composites have a wider range of damping properties than laminated composites with the same fiber volume fractions.

Using Acoustic Emissions to Detect Damage in Three-Dimensional Braided Composites

Three-dimensional(3D)braided composites with better properties have been used in some particular industries.Some have had obvious signs of crack when they are braided.Others have had catastrophic failures occuring without warning.A new methodology for the analysis of failure modes in composite materials by means of acoustic emission techniques has been developed.The occurrence of fiber-breakage during tensile loading tests has been observed by the acoustic emission technology.Using acoustic emission technology is investigated as a means of monitoring 3D braided composites structures,detecting damage,and predicting impending damage.Some of the findings of the research project were presented.

Filling Simulation of Three-dimension Braided Composite in Resin Transfer Molding

This paper measured permeability of three-dimension braided preform by radial technology. The results show that principal permeability tensor coincided with their braiding axial direction. The software of one dimensional flow filling mold was designed using Visual C++ language. Filling time is predicted and validated. The result showed that the filling time of the mold centerline agrees with the prediction value. The filling time of the mould edge is shorter than that of the prediction. An actual plate of 3D braided preform/ modified polyarylacetylene composite is produced according to prediction value and validation analysis.

Void Morphology in 3-D Braided Preform/phenolic Composites

Improved Resin Transfer Molding (RTM) technology and equipment were established.Void content and morphology of the 3-D braided preform/phenolic composite were investigated using different RTM processes.The results showed that void content of the vacuum and compression co-assisted RTM process was the lowest.Void morphologies of the specimen cross-section were analyzed with metallographic microscope.In traditional RTM process,the crack of cross-section was in evidence.In vacuum assisted RTM process,the void shape was divided into three categories:irregular crack,triangle,rotundity and ellipse.The most voids distributed in resin rich areas and were observed as large void based on equivalent diameter.In compression assisted RTM,vacuum and compression co-assisted RTM process,the polygonal voids mostly existed inter tows.Void size was mainly intermediate and small based equivalent diameter separately.

Statistical Model of the 3-D Braided Composites Strength

Based on the statistical model for the tensile statistical strength of unidirectional composite materials and the stress analysis of 3-D braided composites, a new method is proposed to calculate the tensile statistical strength of the 3-D braided compos- ites. With this method, the strength of 3-D braided composites can be calculated with very large accuracy, and the statistical parameters of 3-D braided composites can be determined. The numerical result shows that the tensile statistical strength of 3-D braided composites can be predicted using this method.

Conical Sonic-Supersonic Solutions for the 3-D Steady Full Euler Equations

This paper concerns the sonic-supersonic structures of the transonic crossflow generated by the steady supersonic flow past an infinite cone of arbitrary cross section.Under the conical assumption,the three-dimensional(3-D)steady Euler equations can be projected onto the unit sphere and the state of fluid can be characterized by the polar and azimuthal angles.Given a segment smooth curve as a conical-sonic line in the polar-azimuthal angle plane,we construct a classical conical-supersonic solution near the curve under some reasonable assumptions.To overcome the difficulty caused by the parabolic degeneracy,we apply the characteristic decomposition technique to transform the Euler equations into a new degenerate hyperbolic system in a partial hodograph plane.The singular terms are isolated from the highly nonlinear complicated system and then can be handled successfully.We establish a smooth local solution to the new system in a suitable weighted metric space and then express the solution in terms of the original variables.

THE SYSTEM SIMULATION OF THREE-DIMENSIONAL RADAR

To provide a test platform for Electronic Warfare (EW) system, it is needed to simulate the radar received Intermediate Frequency (IF) signals and radar system functions.This letter gives a description of a radar system simulation software developed for frequencyphase scanning three-dimensional (3-D) radar. Experimental results prove that the software could be used for system evaluation and for training purposes as an attractive alternative to real EW system.

Design of Electronic Weft-Insertion System for Three-Dimensional Loom

The motion laws for rapier weft insertion mechanism are analyzed. According to the special requirements on rapier loom's weft-insertion system for weaving three-dimensional( 3-D) fabric,a new rapier electronic weft-insertion system is presented. The design principle for 3-D loom's weft insertion system is introduced,including the design of the motion law of electronic weft-insertion system,the driving system's hardware configure,and its software's controlling principle. The weft insertion system is computer-controlled and servocylinder driven so as to control the rapier's movement to insert the weft into the multi-shed while 3-D weaving. This method greatly simplifies the weft-insertion system,achieves weft-insertion with variable travel,and improves the flexibility and reliability. The weft insertion system has been applied in a 3-D loom successfully.

In-situ three-dimensional visualization of dynamic tension deformation in ferrite stainless steels

An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.

3D-QSAR and Docking Studies of Pyrido[2,3-d]pyrimidine Derivatives as Weel Inhibitors

In order to investigate the inhibiting mechanism and obtain some helpful information for designing functional inhibitors against Wee1, three-dimensional quantitative structure-activity relationship （3D-QSAR） and docking studies have been performed on 45 pyrido[2,3-d] pyrimidine derivatives acting as Wee1 inhibitors. Two optimal 3D-QSAR models with significant statistical quality and satisfactory predictive ability were established, including the CoMFA model （q2=0.707, R2=0.964） and CoMSIA model （q2=0.645, R2=0.972）. The external validation indicated that both CoMFA and CoMSIA models were quite robust and had high predictive power with the predictive correlation coefficient values of 0.707 and 0.794, essen- 2 values of 0.792 and 0.826, the leave-one-out r2m（LOO） values of 0.781 and tim parameter rm2 0.809, r2（ all） values of 0.787 and 0.810, respectively. Moreover, the appropriate binding orientations and conformations of these compounds interacting with Wee1 were revealed by the docking studies. Based on the CoMFA and CoMSIA contour maps and docking analyses, several key structural requirements of these compounds responsible for inhibitory activity were identified as follows： simultaneously introducing high electropositive groups to the sub- stituents R1 and R5 may increase the activity, the substituent R2 should be smaller bulky and higher electronegative, moderate-size and strong electron-withdrawing groups for the substituent R3 is advantageous to the activity, but the substituent X should be medium-size and hydrophilic. These theoretical results help to understand the action mechanism and design novel potential Wee1 inhibitors.

Constrained geometry analysis to resolve 3-D deformations from three ground-based radars

When multiple ground-based radars(GB-rads)are utilized together to resolve three-dimensional(3-D)deformations,the resolving accuracy is related with the measurement geometry constructed by these radars.This paper focuses on constrained geometry analysis to resolve 3-D deformations from three GB-rads.The geometric dilution of precision(GDOP)is utilized to evaluate 3-D deformation accuracy of a single target,and its theoretical equation is derived by building a simplified 3-D coordinate system.Then for a 3-D scene,its optimal accuracy problem is converted into determining the minimum value of an objective function with a boundary constraint.The genetic algorithm is utilized to solve this constrained optimization problem.Numerical simulations are made to validate the correctness of the theoretical analysis results.

Three-dimensional cooperative guidance laws against stationary and maneuvering targets

This paper presents the cooperative strategies for salvo attack of multiple missiles based on the classical proportional navigation（PN） algorithm.The three-dimensional（3-D） guidance laws are developed in a quite simple formulation that consists of a PN component for target capture and a coordination component for simultaneous arrival.The centralized algorithms come into effect when the global information of time-to-go estimation is obtained, whereas the decentralized algorithms have better performance when each missile can only collect information from neighbors.Numerical simulations demonstrate that the proposed coordination algorithms are feasible to perform the cooperative engagement of multiple missiles against both stationary and maneuvering targets.The effectiveness of the 3-D guidance laws is also discussed.

Synthetic aperture radar tomography sampling criteria and three-dimensional range migration algorithm with elevation digital spotlighting

Based on the general geometric model of multi-baseline Synthetic Aperture Radar Tomography （TomoSAR）, the three-dimensional （3-D） sampling criteria, the analytic expression of the 3-D Point Spread Function （PSF） and the 3-D resolution are derived in the 3-D wavenumber domain in this paper. Considering the relationship between the observation geometry and the size of illuminated scenario, a 3-D Range Migration Algorithm with Elevation Digital Spotlighting （RMA-EDS） is proposed. With this algorithm 3-D images of the area of interest can be directly and accurately reconstructed in the 3-D space avoiding the complex operations of 3-D geometric correction. Finally, theoretical analyses and simulation results are presented to demonstrate the shift-varying property of the 3-D PSF and the spatialvarying property of the 3-D resolution and to demonstrate the validity of the 3-D RMA-EDS.

Dynamic phase transition of ferroelectric nanotube described by a spin-1/2 transverse Ising model

The dynamic phase transition properties for ferroelectric nanotube under a spin-1/2 transverse Ising model are studied under the effective field theory(EFT)with correlations.The temperature effects on the pseudo-spin systems are unveiled in three-dimensional(3-D)and two-dimensional(2-D)phase diagrams.Moreover,the dynamic behaviors of exchange interactions on the 3-D and 2-D phase transitions under high temperature are exhibited.The results present that it is hard to obtain pure ferroelectric phase under high temperature;that is,the vibration of orderly pseudo-spins cannot be eliminated completely.

Analysis of Alignment Influence on 3-D Anthropometric Statistics

Three-dimensional （3-D） surface anthropometry can provide much more useful information for many applications such as ergonomic product design than traditional individual body dimension measurements. However, the traditional definition of the percentile calculation is designed only for 1-D anthropometric data estimates. The same approach cannot be applied directly to 3-D anthropometric statistics otherwise it could lead to misinterpretations. In this paper, the influence of alignment references on 3-D anthropometric statistics is analyzed mathematically, which shows that different alignment reference points （for example, landmarks） for translation alignment could result in different object shapes if 3-D anthropometric data are processed for percentile values based on coordinates and that dimension percentile calculations based on coordinate statistics are incompatible with those traditionally based on individual dimensions.

A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.

Reality of Space and Time

In Newton’s classical physics, space and time are treated as absolute, independent quantities and can be discussed separately. In Special Relativity, Einstein proved that space and time are relative and dependent and therefore must not be treated separately. Minkowski adopted four-dimensional space-time frames (4-d s-t frames), which indirectly revealed the dependency of space and time with the addition of a constraint for an event interval. We are not able to visualize 4-d s-t frames. Since space and time are inseparable, three-dimensional space-time frames (3-d s-t frames) can be constructed by embedding time into space to directly show the interdependency of space and time. Time contraction and length contraction can also be depicted graphically using 3-d s-t frames. We have much better understanding reality of space and time in 3-d s-t frames. This will lead to Contextual Reality for better understanding the universe.

UAV feasible path planning based on disturbed fluid and trajectory propagation

In this paper, a novel algorithm based on disturbed fluid and trajectory propagation is developed to solve the three-dimensional（3-D） path planning problem of unmanned aerial vehicle（UAV） in static environment.Firstly, inspired by the phenomenon of streamlines avoiding obstacles, the algorithm based on disturbed fluid is developed and broadened.The effect of obstacles on original fluid field is quantified by the perturbation matrix, where the tangential matrix is first introduced.By modifying the original flow field, the modified one is then obtained, where the streamlines can be regarded as planned paths.And the path proves to avoid all obstacles smoothly and swiftly, follow the shape of obstacles effectively and reach the destination eventually.Then, by considering the kinematics and dynamics equations of UAV, the method called trajectory propagation is adopted to judge the feasibility of the path.If the planned path is unfeasible, repulsive and tangential parameters in the perturbation matrix will be adjusted adaptively based on the resolved state variables of UAV.In most cases, a flyable path can be obtained eventually.Simulation results demonstrate the effectiveness of this method.

NUMERICAL STUDIES ON LOCOMOTION PERFROMANCE OF FISH-LIKE TAIL FINS

Flapping plates of typical fishlike tail shapes are simulated to investigate their locomotion performance using the multi-block Lattice Boltzmann Method （LBM） and Immersed Boundary （IB） method. Numerical results show that fishlike forked configurations have better locomotion performance compared with unforked plates. Based on our results, the caudal fin in carangi- form mode has greater thrust, and the lunate tail fin in thtmniform mode has higher efficiency. These findings are qualitatively con- sistent with biological observations of fish swimming. Analysis of wake topology shows that the wake of the forked plate consists of a chain of alternating reverse horseshoe-like vortical structures. These structures induce a backward jet and generate a positive thrust. Moreover, this backward jet has a more favorable direction compared with that behind an unforked plate.