期刊文献+
共找到47篇文章
< 1 2 3 >
每页显示 20 50 100
Digital measurement of bone tumor volume by CT three-dimensional reconstruction technology
1
作者 胡永成 《外科研究与新技术》 2011年第2期125-125,共1页
Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital wer... Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the 展开更多
关键词 BONE digital measurement of bone tumor volume by CT three-dimensional reconstruction technology CT
下载PDF
Application of digital technology in nasal reconstruction
2
作者 Yidan Sun Zhenmin Zhao Yang An 《Chinese Journal Of Plastic and Reconstructive Surgery》 2021年第4期204-208,共5页
Nasal defects are facial defects caused by trauma,tumors,or congenital diseases that seriously damage a patient’s physical and mental health.Nasal defects,from skin defects to total nasal defects,require surgical rep... Nasal defects are facial defects caused by trauma,tumors,or congenital diseases that seriously damage a patient’s physical and mental health.Nasal defects,from skin defects to total nasal defects,require surgical repair and reconstruction to restore the appearance and function of the nose,which have always been challenges for rhinoplasty.The development of digital technology has increased the possibility of nasal reconstruction.Digital technology is involved in the preoperative,intraoperative,and postoperative stages of nasal construction and is of great significance in improving the effect of this surgery.This article reviews the application of major digital technologies,including three-dimensional(3D)imaging technology,computer-assisted surgical navigation,and 3D printing,in nasal reconstruction and discusses the shortcomings of the current application of digital technology. 展开更多
关键词 Nasal reconstruction digital technology Computer-aided design/manufacturing three-dimensional printing
下载PDF
Three-dimensional digital technology-assisted precise tumor resection and reconstruction of the femoral trochanter and postoperative functional recovery:a retrospective study
3
作者 Yuanhai Tu Yuanhao Peng +4 位作者 Xinghua Wen Yuning Wang Kang Liu Kai Cheng Han Yan 《Intelligent Medicine》 EI CSCD 2023年第4期235-242,共8页
Background The trochanter of the femur is a common site for bone tumors.However,locating the specificboundary of bone tumor infiltration and determining the surgical method can be challenging.The objective of thisstud... Background The trochanter of the femur is a common site for bone tumors.However,locating the specificboundary of bone tumor infiltration and determining the surgical method can be challenging.The objective of thisstudy was to review the diagnosis,treatment,and surgical outcomes of patients with tumors or tumor-like changesin the femoral trochanter after computer-assisted precise tumor resection and hip-preserving reconstruction ofthe trochanter.Methods From January 2005 to September 2020,11 patients with trochanteric tumors(aged:18–53 years;sixmales and five females)were treated in Guangzhou First People’s Hospital.The cases included aneurysmal bonecyst(n=1),giant cell tumor of bone(n=2),fibrous histiocytoma of bone(n=1),endochondroma(n=1),andfibrous dysplasia of bone(n=6).For patients with trochanteric tumors,computed tomography and magnetic resonance imaging scanning were performed before operation to obtain two-dimensional image data of the lesion.Athree-dimensional digital model of bilateral lower limbs was reconstructed by computer technology,the boundary of tumor growth was determined by computer simulation,the process of tumor resection and reconstructionwas simulated,and the personalized guide template was designed.During the operation,the personalized guideplate guided the precise resection of the tumor,and the allogeneic bone was trimmed to match the shape of thebone defect.Results All 11 patients underwent accurate resection of the tumor or tumor-like lesion and reconstruction ofthe hip.In eight cases,the lesion was confined to the trochanter,which was fixed with large segment allogeneicbone,autologous iliac bone,and proximal femoral anatomic plate.In three cases,allogeneic bone,autologousiliac bone,and femoral reconstruction nail were used to fix the tumor under the trochanter.Postoperative Xray examination showed that the repair and reconstruction of the bone defect was effective,and callus bridgingbetween the allogenic bone and autogenous bone was observed 6 months after operation.All patients recoveredtheir walking function 3–6 months after operation.The duration of the follow-up period ranged from 6 monthsto 6 years.A patient experienced recurrence of endochondroma;pathological examination revealed chondrocyticsarcoma.The remaining 10 patients were treated with segmental resection and reconstruction.The operationtime ranged 2.5–4.5 h(average:3.2 h).Intraoperative blood loss ranged from 300 to 500 ml(average:368 ml).The local recurrence rate was 9.1%,and the overall survival rate was 100%.The average Musculoskeletal TumorSociety score was 27(excellent and good for eight and three patients,respectively).Conclusions Three-dimensional computer skeleton modeling and simulation-assisted resection and reconstruction of femoral trochanteric tumor is a new surgical technique,which might markedly improve the surgical effect,shorten the surgical time,increase the overall survival rate of patients with tumors,reduce the local recurrencerate,assist in the digitization and programming of femoral trochanteric tumor surgery,and improve surgicalaccuracy. 展开更多
关键词 three-dimensional digital technology Bone tumor Femoral trochanteric Surgical treatment Functional reconstruction
原文传递
Three-Dimensional Volumetric Analysis of Venous Malformations for Assessing the Effectiveness of Percutaneous Sclerotherapy
4
作者 Yungying WANG Hao GU +3 位作者 Li HU Xi YANG Hui CHEN Xiaoxi LIN 《Chinese Journal Of Plastic and Reconstructive Surgery》 2020年第4期241-247,共7页
BACKGROUND Percutaneous sclerotherapy can be used to successfully treat venous malformations(VMs)of the head,neck,and limbs.However,the standard curative effect of sclerotherapy has rarely been analyzed,and there is c... BACKGROUND Percutaneous sclerotherapy can be used to successfully treat venous malformations(VMs)of the head,neck,and limbs.However,the standard curative effect of sclerotherapy has rarely been analyzed,and there is currently no accurate statistical method to measure the volume of VMs after sclerotherapy.Here,we propose a novel threedimensional(3D)reconstruction method to evaluate this effect.OBJECTIVE To test the feasibility of 3D software(MIMICS 19.0)to evaluate the treatment effect of sclerotherapy.METHODS This retrospective study included patients with VMs on the head,neck,and limbs who were treated with ethanol sclerotherapy or foam sclerotherapy every 8 weeks.MIMICS 19.0 was used to calculate the performance of the lesion after treatment and measure the VM volumes before and after the treatment.The effect of the clinical treatment dose on the lesion was evaluated,and the treatment effect of each patient was recorded.The relationship between the number of treatments and the reduced volume of VMs was analyzed.RESULTS Based on the MIMICS-calculated regions of interest(ROI),we found that 1 mL of ethanol reduced the lesion by 473 mm3 and that one dosage of foam(1 mL of polidocanol and 4 mL air content)reduced the lesion by 2138 mm3,demonstrating that the foam sclerosing agent exhibited greater efficacy in this study.CONCLUSIONS The MIMICS 3D volume reconstruction method can effectively and safely evaluate the efficacy of sclerotherapy and provide a preoperative evaluation.This method is simple,accurate,and feasible. 展开更多
关键词 Venous malformations three-dimensional reconstruction digital imaging technology SCLEROTHERAPY
下载PDF
Digital medical technology based on 64-slice computed tomography in hepatic surgery 被引量:29
5
作者 FANG Chi-hua HUANG Yan-peng +3 位作者 CHEN Mian-ling LU Chao-min LI Xiao-feng QIU Wen-feng 《Chinese Medical Journal》 SCIE CAS CSCD 2010年第9期1149-1153,共5页
Background With the rapid development of computer technology, digital medicine has become a new direction in surgery. The application of digital medicine in hepatic surgery is still at the early stage and less reporte... Background With the rapid development of computer technology, digital medicine has become a new direction in surgery. The application of digital medicine in hepatic surgery is still at the early stage and less reported in the literature. The aim of this study was to apply digital medical technology in the context of hepatic surgery. Methods Data from 64-slice helical computed tomography of 17 patients, including 13 with hepatocellular carcinoma and 4 with hepatic hemangioma, were imported into independently developed medical image software program, segmentation and three-dimensional reconstruction were performed. The three-dimensional models were then processed with the FreeForm Modeling System. We used virtual surgical instruments to perform surgery on the models. Simulated surgeries included six hepatic segmentectomies, four left hemihepatectomies, three right hemihepatectomies for hepatocellular carcinoma, one hepatic segmentectomy, two stripping surgeries, and one irregular segmentectomy combined with stripping surgery for hemangioma. For resections involving more than three hepatic segments, total and residual functional hepatic volumes were measured before and after simulation surgery, and the resection ratio was calculated.Results The anatomy of the models was distinct and was used to localize lesions. We used virtual surgical instruments to perform simulated surgeries and used the models to optimize actual surgeries. We were able to minimize resection volume as well as surgical risk.Conclusions Digital medical technology is helpful in the diagnosis of hepatic disease and in optimizing surgical plans. Three-dimensional models can decrease surgical risk and help prevent postoperative hepatic failure. 展开更多
关键词 digital medical technology liver failure LIVER simulation surgery three-dimensional reconstruction
原文传递
数字孪生水下三维实景数据底板获取技术研究 被引量:2
6
作者 赵薛强 张永 《水利信息化》 2023年第2期24-27,33,共5页
为获取高精度的水下三维模型细节纹理结构,满足数字孪生建设对水下三维实景数据底板获取的需求,实现对水下构筑物的实时可视化动态监测,基于GNSS和USBL技术研究构建水陆一体化定位系统,融合水陆一体化定位技术、有缆ROV和水下摄影测量... 为获取高精度的水下三维模型细节纹理结构,满足数字孪生建设对水下三维实景数据底板获取的需求,实现对水下构筑物的实时可视化动态监测,基于GNSS和USBL技术研究构建水陆一体化定位系统,融合水陆一体化定位技术、有缆ROV和水下摄影测量设备等研发水下摄影测量系统,实现数字孪生水下三维实景数据底板的获取,并采用多波束测深、水下三维全景成像声呐等系统,对水下摄影测量系统获取的三维实景模型数据成果精度进行验证。结果表明:水下摄影测量系统获取的三维实景模型精度满足规范要求,可用于数字孪生流域/工程等水下基础数据底板的建设,也可为水下高精度三维场景重构再现和水利工程水下构筑物实时动态监测提供技术支撑。 展开更多
关键词 数字孪生 水下三维实景模型 数据底板 获取技术 水下摄影测量 精度评价 水陆一体化定位
下载PDF
基于摄影重构技术的三轴试样变形测量研究 被引量:1
7
作者 李文杰 叶锴 +1 位作者 夏燚 牟春梅 《中国测试》 CAS 北大核心 2023年第2期159-167,共9页
为克服传统三轴仪对土样变形的限制,获取三轴试样真实的轴向、径向应变,将摄影测量技术与数字图像技术相结合,对常规三轴仪进行微小改动,利用单镜头相机对三轴试验全过程进行图像采集,重构土样在不同加载阶段的三维模型,从而获取试样的... 为克服传统三轴仪对土样变形的限制,获取三轴试样真实的轴向、径向应变,将摄影测量技术与数字图像技术相结合,对常规三轴仪进行微小改动,利用单镜头相机对三轴试验全过程进行图像采集,重构土样在不同加载阶段的三维模型,从而获取试样的真实变形数据。结果表明:1)经折射修正后的摄影测量法在三轴试验中有较高的精度,其中轴向测量值整体误差在0.104 mm;径向截面最大测量误差为0.211 mm,最小误差在0.138 mm,基本满足实验所需。2)获取土样局部与整体的轴向、径向变形数据。与常规三轴试验所测结果相比,摄影重构法所得试样整体轴向应变偏小,整体径向应变偏大,整体强度偏小,运用摄影重构法能对土样具体区域变形进行直接测量,结果更符合实际。 展开更多
关键词 三轴试验 摄影测量 数字图像技术 试样变形
下载PDF
低空摄影测量技术在大比例尺地形图中的应用 被引量:2
8
作者 孙训斌 蔡威 李杨 《山西建筑》 2023年第5期186-188,共3页
以新沂市为例,利用数字航空摄影测量技术进行了1∶1 000地形图测绘技术的研究。应用结果表明:数字航空摄影测量技术生产的大比例尺地形图成果精度完全满足精度和质量要求且效率更高,可大范围推广。
关键词 数字航空摄影测量技术 立体测图 大比例尺地形图
下载PDF
无人机摄影测量技术在数字化地形测量的应用探讨
9
作者 蔡安宏 《科技资讯》 2023年第17期136-139,共4页
在工程测量领域,地形测量是非常重要的一项工作,即指的是对地形图进行测绘的作业,主要对地球表面的地物、地形处于水平面上的投影位置及高程进行测量,然后根据一定的比例缩小处理,进一步采取标记、符号的方式,将地形图绘制出来。该文重... 在工程测量领域,地形测量是非常重要的一项工作,即指的是对地形图进行测绘的作业,主要对地球表面的地物、地形处于水平面上的投影位置及高程进行测量,然后根据一定的比例缩小处理,进一步采取标记、符号的方式,将地形图绘制出来。该文重点分析探讨无人机摄影测量技术在数字化地形测量的具体应用要点,旨在全面提高数字化地形测量工作质量。 展开更多
关键词 数字化地形测量 无人机摄影测量技术 优势 原则 应用要点
下载PDF
航空摄影测量技术在构建数字城市中的应用
10
作者 任正昊 《智能建筑与智慧城市》 2023年第9期23-25,共3页
航空摄影测量技术通过将数字影像数据与地理信息系统相结合,可以实现对城市规划、交通建设、地质勘察等工作的实时监控。文章从航空摄影测量技术的基本概念、数字城市构建的意义出发,介绍了常见的航空摄影测量技术并对该项技术在数字城... 航空摄影测量技术通过将数字影像数据与地理信息系统相结合,可以实现对城市规划、交通建设、地质勘察等工作的实时监控。文章从航空摄影测量技术的基本概念、数字城市构建的意义出发,介绍了常见的航空摄影测量技术并对该项技术在数字城市中的应用方式进行了论述,并对成果应用表现进行了讨论。通过研究,理清了航空摄影测量技术在数字城市构建中的基本应用思路,可充分发挥该项技术作用,推动数字城市发展。 展开更多
关键词 航空摄影测量技术 数字城市 三维建模技术
下载PDF
三维数字城市建模中倾斜摄影测量技术的应用
11
作者 李思赣 周广贤 《科学与信息化》 2023年第7期26-28,共3页
文章先对无人机倾斜摄影测量的基本原理及其在实际应用中的技术特征进行分析,而后对三维数字城市建模中倾斜摄影测量技术的操作要点进行列举,最后基于项目实施过程展示建模成果、分析三维数字模型中的精度,此外,对三维数字城市建模中倾... 文章先对无人机倾斜摄影测量的基本原理及其在实际应用中的技术特征进行分析,而后对三维数字城市建模中倾斜摄影测量技术的操作要点进行列举,最后基于项目实施过程展示建模成果、分析三维数字模型中的精度,此外,对三维数字城市建模中倾斜摄影测量技术案例进行深入剖析,以期充分展现出倾斜摄影测量技术的应用优势,不断完善三维数字城市建模,从而进一步提升三维数字城市的建设水平。 展开更多
关键词 三维数字城市建模 倾斜摄影测量 技术应用
下载PDF
面向数字城市建设的三维建模关键技术研究与应用 被引量:83
12
作者 关丽 丁燕杰 +3 位作者 张辉 冯学兵 谭向农 赵金玲 《测绘通报》 CSCD 北大核心 2017年第2期90-94,共5页
三维模型数据以其直观性、客观性和真实性等特性,成为数字城市数据库中的重要组成部分。为了解决三维模型数据获取的精准性和高效性等,在建设数字城市过程中,采取多种技术方式实现三维模型的获取。包括采用传统手工三维建模实现三维精... 三维模型数据以其直观性、客观性和真实性等特性,成为数字城市数据库中的重要组成部分。为了解决三维模型数据获取的精准性和高效性等,在建设数字城市过程中,采取多种技术方式实现三维模型的获取。包括采用传统手工三维建模实现三维精细模型的精准性,采用三维激光扫描技术实现三维模型数据的超精细化,以倾斜摄影测量的半自动建模方式实现快速建模等。本文从技术角度全面总结了在建设数字城市过程中三维模型的具体技术途径及应用方式。三维模型数据应用于数字城市的历史文保、教育、经济等多个领域,为智慧城市的建设奠定了坚实的数据基础。 展开更多
关键词 数字城市 三维模型 三维激光扫描 倾斜摄影测量
下载PDF
基于免棱镜全站仪的岩体边坡控制测量及结构面产状检验测量 被引量:12
13
作者 王凤艳 黄润秋 +4 位作者 陈剑平 杨国东 牛雪峰 韩东亮 马丽霞 《吉林大学学报(工学版)》 EI CAS CSCD 北大核心 2013年第6期1607-1614,共8页
以长春市杨家沟采石场边坡为对象,研究了边坡控制测量中控制点的布设、点位选取原则、免棱镜全站仪极坐标测量方法及基于误差理论的点位精度评定,获取了边坡坡面控制点的三维坐标及精度,进一步将控制测量数据用于边坡的三维建模并评定... 以长春市杨家沟采石场边坡为对象,研究了边坡控制测量中控制点的布设、点位选取原则、免棱镜全站仪极坐标测量方法及基于误差理论的点位精度评定,获取了边坡坡面控制点的三维坐标及精度,进一步将控制测量数据用于边坡的三维建模并评定了模型的点位测量精度。对于产状检验测量,应用免棱镜全站仪测取结构面上不在同一直线上的点坐标,运用立体几何及方位概念建立了基于空间坐标的产状解算模型,获取结构面产状。通过免棱镜全站仪三点法和四点法产状测量的对比分析以及四点法与罗盘产状测量的对比分析,验证了四点法产状测量的有效性及可靠性。最后以四点法测取的人员难以攀及的高陡边坡结构面产状为标准,与数字近景摄影测量建立边坡立体模型下解译的产状做对比分析,获取了数字近景摄影测量解译产状的实际精度。研究表明了免棱镜全站仪在岩体边坡控制测量中的可行性、数字近景摄影测量建立边坡立体模型的准确性以及获取结构面产状信息的可靠性。 展开更多
关键词 工程测量技术 数字近景摄影测量 控制测量 产状测量 精度分析 免棱镜全站仪 岩体边坡
下载PDF
数字化遗产景观:基于三维点云技术的上海豫园大假山空间特征研究 被引量:28
14
作者 杨晨 韩锋 《中国园林》 北大核心 2018年第11期20-24,共5页
三维点云技术的快速发展为重新认知中国古典园林遗产提供了重要机遇。以遗产景观保护为视角,对上海豫园黄石大假山空间特征进行定量化研究:全面梳理大假山的历史演进与核心特征,集成运用数字化近景摄影测量技术、激光雷达扫描技术和点... 三维点云技术的快速发展为重新认知中国古典园林遗产提供了重要机遇。以遗产景观保护为视角,对上海豫园黄石大假山空间特征进行定量化研究:全面梳理大假山的历史演进与核心特征,集成运用数字化近景摄影测量技术、激光雷达扫描技术和点云可视化技术采集大假山的空间信息,构建数字化三维模型,更正对其空间尺度认知的误差,并以此为基础,对豫园大假山主次分明、浑然一体、峰峦相间、错落有致、蹬道迂回、盘旋曲赴六大空间特征开展定量化的识别与分析,相关成果为进一步研究大假山的遗产价值和保护策略提供了新的视角和工具。 展开更多
关键词 风景园林 点云技术 豫园大假山 空间特征 数字化近景摄影测量 激光雷达
下载PDF
填料粗粒含量对筋土界面拉拔性状的影响 被引量:5
15
作者 王家全 康博文 +1 位作者 周圆兀 唐滢 《岩土力学》 EI CAS CSCD 北大核心 2022年第5期1249-1260,共12页
基于可视化拉拔系统及数字照相量测技术,针对5种不同粗粒含量P_(5)(粒径>5mm颗粒的质量百分数)的粗粒土开展拉拔试验,探讨了粗粒含量P_(5)对筋土界面强度指标、颗粒位移演化及土工格栅应变等的影响。研究表明:界面黏聚力c与界面摩擦... 基于可视化拉拔系统及数字照相量测技术,针对5种不同粗粒含量P_(5)(粒径>5mm颗粒的质量百分数)的粗粒土开展拉拔试验,探讨了粗粒含量P_(5)对筋土界面强度指标、颗粒位移演化及土工格栅应变等的影响。研究表明:界面黏聚力c与界面摩擦角δ随P5增加呈不同程度增加;P5从20%增长至35%后,土工格栅末段出现应变及拉拔力峰值时所对应的格栅拉拔位移均减少,但各段土工格栅应变量增加;随着P_(5)的增加,筋土界面粗粒土颗粒位移矢量方向逐渐趋于水平,其位移量显著减小。同时,筋土界面空洞明显减少;P_(5)增加使筋土界面的粗粒土颗粒位移减小,而间接影响区范围扩大,使一定高度范围内的粗粒土颗粒被间接带动,在宏观上使界面似黏聚力增加;P_(5)增加后,位于筋土界面V_(3)处的土颗粒最大位移速度减小。位于间接影响区的V_(1)、V_(2)处的土颗粒最大位移速度因受间接影响区范围扩大,颗粒扰动加强而有少量增大。 展开更多
关键词 粗粒含量 土工格栅 界面强度 土工格栅应变 数字照相量测技术
下载PDF
土木工程结构试验量测技术研究进展与现状 被引量:5
16
作者 赵宪忠 李秋云 《西安建筑科技大学学报(自然科学版)》 CSCD 北大核心 2017年第1期48-55,共8页
理论分析、试验研究和数值模拟是土木工程研究的三种基本手段,其中试验研究是第一性的.目前,结构试验在作用方式上,已从传统的静态、准静态试验逐步发展到拟动力、动力试验;在空间尺度上,也从常规尺度试验向微细观材性试验和足尺结构试... 理论分析、试验研究和数值模拟是土木工程研究的三种基本手段,其中试验研究是第一性的.目前,结构试验在作用方式上,已从传统的静态、准静态试验逐步发展到拟动力、动力试验;在空间尺度上,也从常规尺度试验向微细观材性试验和足尺结构试验拓展,从而对试验的量测技术提出了更高的要求.由于受到测量原理和硬件设备的限制,传统量测技术已无法完全满足现代结构试验的量测需求,需要传统的结构试验量测技术结合各种新兴技术进行不断完善和创新.本文总结了传统结构试验量测技术的发展现状,评述其在现代结构试验中的适用情况,并介绍了数字图像相关技术和近景摄影测量技术等新兴结构试验量测手段.其中,数字图像相关技术广泛应用于材料力学行为的测试与分析,概述其在结构试验中的应用并重点分析影响其测量精度的相关因素;近景摄影测量技术属非接触测量范畴,动态采集频率高,测量范围广,在高频动态结构试验的位移和应变测量方面有巨大潜力. 展开更多
关键词 结构试验 量测技术 位移 应变 数字图像相关 近景摄影测量
下载PDF
大比例尺数字测图的发展与展望 被引量:13
17
作者 崔书珍 李建 冯大福 《北京测绘》 2015年第1期134-137,共4页
通过大比例尺数字测图发展的回顾,了解大比例尺数字测图发展历程;对全站仪技术、网络RTK技术、三维激光扫描技术、无人机低空摄影测量技术在大比例尺数字测图中的应用进行分析和展望。
关键词 大比例尺 数字测图 全站仪 网络RTK 三维激光扫描技术 无人机 数字摄影测量
下载PDF
基于倾斜摄影测量技术的三维数字城市建模 被引量:36
18
作者 江明明 《测绘与空间地理信息》 2017年第3期189-190,共2页
使用较为先进的信息化手段,能够为城市的规划、建设、管理、运营以及一些应急措施的应用发挥良好作用。三维数字城市的建模,能够在很大程度上有效提高政府的实际服务和管理水平,从而有效增强城市的管理效率,为有效节约城市资源发挥重要... 使用较为先进的信息化手段,能够为城市的规划、建设、管理、运营以及一些应急措施的应用发挥良好作用。三维数字城市的建模,能够在很大程度上有效提高政府的实际服务和管理水平,从而有效增强城市的管理效率,为有效节约城市资源发挥重要的作用。本文主要从数字城市进行三维建模的现实状况入手,对倾斜摄影技术的内涵和技术特征进行详细分析,从而介绍基于倾斜摄影测量技术的三维数字城市建模项目的具体实施情况。 展开更多
关键词 倾斜摄影测量 技术 三位数字 城市建模
下载PDF
隧洞控制测量中免棱镜全站仪测量方向与结构面夹角的限差分析 被引量:1
19
作者 冯国强 王凤艳 韩东亮 《世界地质》 CAS 2015年第3期842-847,共6页
准确获取隧洞岩体结构面的几何信息对于隧洞的稳定性评价至关重要。研究区位于长春市净月潭吉林大学岩体力学隧洞实习基地。应用免棱镜全站仪进行岩体隧洞的控制测量,按照测量工作中"先控制后碎部"的基本原则,进行全站仪棱镜... 准确获取隧洞岩体结构面的几何信息对于隧洞的稳定性评价至关重要。研究区位于长春市净月潭吉林大学岩体力学隧洞实习基地。应用免棱镜全站仪进行岩体隧洞的控制测量,按照测量工作中"先控制后碎部"的基本原则,进行全站仪棱镜模式下的导线测量及在各导线点上极坐标法免棱镜模式的岩体结构面控制点测量;通过对同测站及异测站相同结构面控制点坐标数据的对比分析,探讨免棱镜全站仪测量方向与岩体结构面夹角的限差。研究表明:在隧洞控制测量中,免棱镜全站仪测量方向与结构面间夹角大于30°是准确获取岩体目标控制点坐标的必要条件之一。 展开更多
关键词 工程测量技术 数字近景摄影测量 控制测量 免棱镜全站仪 隧洞测量 限差分析
下载PDF
基于倾斜摄影测量技术的三维数字城市建模 被引量:224
20
作者 孙宏伟 《现代测绘》 2014年第1期18-21,共4页
在丹阳市数字城市三维建模生产中,利用倾斜摄影测量技术及相关快速建模的方法实施数字城市三维建模生产,本文总结了一套快捷高效的适合于实际生产操作的技术方案,该技术方案能显著提高测绘生产效率。贴近作业生产,切合实际,对于数字城... 在丹阳市数字城市三维建模生产中,利用倾斜摄影测量技术及相关快速建模的方法实施数字城市三维建模生产,本文总结了一套快捷高效的适合于实际生产操作的技术方案,该技术方案能显著提高测绘生产效率。贴近作业生产,切合实际,对于数字城市三维建模和测绘生产具有较好的参考借鉴作用。特别是对于大范围区域的三维建模,能有效地实现速度和逼真度的兼顾,显示其优越性。 展开更多
关键词 倾斜摄影测量 数字城市 三维建模 快速建模技术 大区域
下载PDF
上一页 1 2 3 下一页 到第
使用帮助 返回顶部