Optical encryption of multiple three-dimensional objects based on multiple interferences and single-pixel digital holography

We present an optical encryption method of multiple three-dimensional objects based on multiple interferences and single-pixel digital holography. By modifying the Mach-Zehnder interferometer, the interference of the multiple objects beams and the one reference beam is used to simultaneously encrypt multiple objects into a ciphertext. During decryption, each three-dimensional object can be decrypted independently without having to decrypt other objects. Since the single- pixel digital holography based on compressive sensing theory is introduced, the encrypted data of this method is effectively reduced. In addition, recording fewer encrypted data can greatly reduce the bandwidth of network transmission. Moreover, the compressive sensing essentially serves as a secret key that makes an intruder attack invalid, which means that the system is more secure than the conventional encryption method. Simulation results demonstrate the feasibility of the proposed method and show that the system has good security performance.

A combination of digital design and three-dimensional printing to assist treatment of thoracolumbar compression fractures using percutaneous kyphoplasty

Objective:To evaluate the clinical efficacy of the preoperative digita1 design combined with three dimensional(3D)printing models to assist percutaneous kyphoplasty(PKP)treatment for thoracolumbar compression frac tures.Methods:From January 2018 to August 2020,we obtained data of 99 patients diagnosed thoracolumbar compression fractures.These patients were divided into control group(n=50)underwent traditional PKP surgery,and observation group(n=49)underwent preoperative digital design combined with 3D printing model assisted PKP treatment.The clinical efficacy was evaluated with five parameters,including operation time,number of intraoperative radiographs,visual analogue scale(VAS)score,Cobb Angle change,and high compression rate of injured vertebrae.Results:There were statistically significant differences of operation time and number of intraoperative radio graphs between the two groups(P<0.05).For VAS score,Cobb Angle change and vertebral height compression rate,all of these three parameters were significantly improved when the patients accepted surgery teatment in two groups(P<0.05).However,there were no significant differences between control group and observation group for these three parameters either before or after surgery(P>0.05).Conclusions:Through the design of preoperative surgical guide plate and the application of 3D printing model to guide the operation,the precise design of preoperative surgical puncture site and puncture Angle of the injured vertebra was realized,the number of intraoperative radiographs was reduced,the operation time was shortened and the operation efficiency was improved.

Exact analytical solution to three-dimensional phase change heat transfer problems in biological tissues subject to freezing

Analytically solving a three-dimensional （3-D） bioheat transfer problem with phase change during a freezing process is extremely difficult but theoretically important. The moving heat source model and the Green function method are introduced to deal with the cryopreservation process of in vitro biomaterials. Exact solutions for the 3-D temperature transients of tissues under various boundary conditions, such as totally convective cooling, totally fixed temperature cooling and a hybrid between them on tissue surfaces, are obtained. Furthermore, the cryosurgical process in living tissues subject to freezing by a single or multiple cryoprobes is also analytically solved. A closed-form analytical solution to the bioheat phase change process is derived by considering contributions from blood perfusion heat transfer, metabolic heat generation, and heat sink of a cryoprobe. The present method is expected to have significant value for analytically solving complex bioheat transfer problems with phase change.

Digitizing the Undigitized: Converting Traditional Archaeological Records into Computerized, Three-Dimensional Site Reconstruction

Archaeological excavation involves disintegration, removal, and reassembly of the archaeological record;as such it is considered by many to be an unrepeatable, destructive activity. This perception has contributed to an advancement in archaeological practice, namely, the development of computerized recording systems that digitally record archaeological excavations spatially and volumetrically during fieldwork. This paper is concerned with those archaeological sites where digital field recording has not been done. These sites, recorded by traditional methods, should not be excluded from attempts to restructure the spatial, volumetric, and stratigraphic archaeological data. A thorough methodology for the conversion of traditional records into digitized data is presented, including the detailed procedures required for three-dimensional plotting of recorded data—both the excavated material and the drawn site maps and cross-sections. Finally, the use of these methods is demonstrated on a complex Early to Middle Pleistocene site, illustrating the benefits of digitization and three-dimensional reconstruction in resolving stratigraphic and spatial questions.

Evaluation of Maxillary Dental Arch Widths in Individuals Having Unilateral and Bilateral Cleft Lip and Palate Using Three-Dimensional Digital Models

Aim: Maxillary dental arch widths were evaluated in individuals having unilateral (UCLP) and bilateral (BCLP) cleft lip and palate (CLP) using three-dimensional (3D) digital models. Material and Method: The study had been conducted on 80 individuals aged between 14 - 17 years having UCLP and BCLP. 40 of the individuals had UCLP, whereas 40 had BCLP. The maxillary dental models taken from patients before the treatment were scanned using Orthomodel Programme (v.1.01, Orthomodel Inc., Istanbul, Turkey) to obtain 3D imagery. Student’s t-test was used in order to assess the data obtained by using SPSS software version 22.0. Results: In BCLP, the average inter-canine distance was 17.44 ± 1.31 mm, the average inter-molar distance was 36.57 ± 1.12 mm, while inter-canine/inter-molar ratio was 0.47. Whereas in UCLP, it was 25.10 ± 0.63 mm, 42.20 ± 0.53 mm and 0.59. The inter-canine distance in UCLP was found to be large enough to be statistically significant (p 0.05), even though there were differences in inter-molar widths. Conclusion: For the stable orthodontic treatment results, one of the most important points is arch form and widths to be coherent with each other. In our study, the increase of inter-canine distance seen in UCLP indicates that in the cleft region, the maxillary arch is inclined over to the back, while the same situation in BCLP suggests that the maxillary segments are collapsed inside. The difference in the arch is highly affected by the primary surgical treatment.

Digital measurement of bone tumor volume by CT three-dimensional reconstruction technology

Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the

Three-dimensional(3D) Printing Technology Assisted by Minimally Invasive Surgery for Pubic Rami Fractures

The feasibility of three-dimensional (3D) printing technology cgmbined with minimally invasive surgery in the treatment of pubic rami fractures was explored.From August 2015 to October 2017,a series of 30 patients who underwent surgical stabilization of their anterior pelvic ring (all utilizing the 3D printing technology)by one surgeon at a single hospital were studied.The minimally invasive incisions were made through anterior inferior cilia spine and pubic nodule.Data collected included the operative duration,the blood loss,the damage of the important tissue,the biographic union and therecovery of the function after the operation.Measurements on inlet and outlet pelvic cardiograph were made immediately post-operation and at all follow-up clinic visits.The scores of reduction and function were measured during follow-up.Results showed that the wounds of 30 patients were healed in the first stage,and there was no injury of important structures such as blood vessels and nerves.According to the Matta criteria,excellent effectiveness was obtained in 22 cases and good in 8 cases.According to the functional evaluation criteria of Majeed,excellent effectiveness was obtained in 21 cases and good in 9 cases.It was suggested that the 3D printing technology assisted by minimally invasive surgery can better evaluate the pelvic fracture before operation,which was helpful in plate modeling, and can shorten surgery duration and reduce intraoperative blood loss and complications. The positioning accuracy was improved,and better surgical result was finally achieved.

Three-Dimensional Computerized Tomography-Assisted Identification of Necrotic Volume, Distribution, Shape and Prognosis of Collapse in ONFH

Objective: We constructed 3D-model of ONFH in computer according to three-dimensional computerized tomography (3D-CT) data. We determined the location and volume of necrosis to investigate its clinical efficacy. Method: Totally 92 hips (59 cases) with ONFH (44 males, 15 females) were included, with mean age of 37.5 years (range from 26 to 58). Totally 20 cases (35 hips) were induced by corticosteroid (CTSs), 31 (49 hips) induced by alcohol, 4 (4 hips) induced by trauma and 4 (4 hips) idiopathic. All the hips were categorized into stage ARCO II. Finally diagnosed by MRI, all hips were scanned by CT to acquire data in DICOM format. The images were imported into software to extract 3D-shape of femoral heads, necrotic foci, their volumes and distribution in each quadrant. Deviation of volumes between digital image and biopsy specimen was analyzed by SAS9.1 package. Correlativity between collapse and volume of necrosis under specific pathogeneses was also analyzed. Among the cases necessitating total hip arthroplasty (THA) due to advancing to ARCO III, we randomly selected 8 of them to perform 3D-CT scanning thrice prior to surgical operation. Total femoral heads harvested were torn asunder. Cubic capacity of femoral heads and necrotic foci were hereby measured and compared with those acquired from digital models. Result: Through the digital model, necrotic foci were found mainly locating within the super lateral portion of femoral head, coinciding with those observed in biopsy specimen. Average volumetric ratio of digitally acquired necrosis focus/femoral head in 58 collapsed hips was 36.8%. The ratio of the 34 hips without collapse was 17.3%. In collapsed femoral heads, the distribution of necrosis focus was 23.4% in quadrant 1 (q1), 23.6% in q2, 12.1% in q3, 14.4% in q4, 9.0% in q5, 11.8% in q6, 1.6% in q7 and 3.9% in q8. In femoral heads without collapse, the distribution was 34.2% in q1, 29.6% in q2, 11.8% in q3, 11.3% in q4, 6.0% in q5, 6.0% in q6, 0.5% in q7 and 0.4% in q8. As for the average cubic capacities of femoral heads and necrotic foci, those acquired from the digital model and biopsy specimen had no significant difference in matched-pairs test (t = -1.49, P = 0.179 for femoral heads and t = -1.52, P = 0.172 for necrotic foci). There was significant difference (F = 2.720, P = 0.035 P was respectively 0.0001 and 0.0005). Decision tree model showed that 94.6% (53/56) hips would progress into collapse if the volumetric ratio of necrotic tissue was over 23.48%. Otherwise, if distribution in q2 was over 45.13%, 83.3% (5/6) hips would progress into collapse. No collapse (0/30) would occur if the distribution of necrotic tissue in q2 was under 45.13%. Conclusion: Digital 3D-model reconstructed from CT scanning can precisely incarnate spatial orientation of necrotic foci in femoral head. Multinomial logistic regression and decision-making tree shows that volumetric ratio of necrotic tissues plays an important role in anticipating collapse of femoral head.

Reconstruction of three-dimensional grain structure in polycrystalline iron via an interactive segmentation method

Using a total of 297 segmented sections,we reconstructed the three-dimensional(3D) structure of pure iron and obtained the largest dataset of 16254 3D complete grains reported to date.The mean values of equivalent sphere radius and face number of pure iron were observed to be consistent with those of Monte Carlo simulated grains,phase-field simulated grains,Ti-alloy grains,and Ni-based super alloy grains.In this work,by finding a balance between automatic methods and manual refinement,we developed an interactive segmentation method to segment serial sections accurately in the reconstruction of the 3D microstructure;this approach can save time as well as substantially eliminate errors.The segmentation process comprises four operations:image preprocessing,breakpoint detection based on mathematical morphology analysis,optimized automatic connection of the breakpoints,and manual refinement by artificial evaluation.

Radiation effect on temperature distribution in three-dimensional Couette flow with suction or injection

A theoretical analysis of three-dimensional Couette flow with radiation effect on temperature distribution has been analysed, when the injection of the fluid at the lower stationary plate is a transverse sinusoidat one and its corresponding removal by constant suction through the upper porous plate is in uniform motion. Due to this type of injection velocity, the flow becomes three-dimensional. The effect of Prandtl number, radiation parameter and injection parameter on rate of heat transfer has been examined by the help of graphs. The Prandtl number has a much greater effect on the.temperature distribution than the injection or radiation parameter.

A COMPUTER CODE FASTOR-3D FOR TRANSIENT THREE-DIMENSIONAL SIMULATION ON FLOW AND HEAT TRANS-FER WITH POROSITY APPROXIMATION

ＡＣＯＭＰＵＴＥＲＣＯＤＥＦＡＳＴＯＲ┐３ＤＦＯＲＴＲＡＮＳＩＥＮＴＴＨＲＥＥ┐ＤＩＭＥＮＳＩＯＮＡＬＳＩＭＵＬＡＴＩＯＮＯＮＦＬＯＷＡＮＤＨＥＡＴＴＲＡＮＳ┐ＦＥＲＷＩＴＨＰＯＲＯＳＩＴＹＡＰＰＲＯＸＩＭＡＴＩＯＮ＊ＬｕＷａｎｃｈｅｎｇ（卢万成）Ｄ...

Mesh generation and optimization from digital rock fractures based on neural style transfer

The complex geometric features of subsurface fractures at different scales makes mesh generation challenging and/or expensive.In this paper,we make use of neural style transfer(NST),a machine learning technique,to generate mesh from rock fracture images.In this new approach,we use digital rock fractures at multiple scales that represent’content’and define uniformly shaped and sized triangles to represent’style’.The 19-layer convolutional neural network(CNN)learns the content from the rock image,including lower-level features(such as edges and corners)and higher-level features(such as rock,fractures,or other mineral fillings),and learns the style from the triangular grids.By optimizing the cost function to achieve approximation to represent both the content and the style,numerical meshes can be generated and optimized.We utilize the NST to generate meshes for rough fractures with asperities formed in rock,a network of fractures embedded in rock,and a sand aggregate with multiple grains.Based on the examples,we show that this new NST technique can make mesh generation and optimization much more efficient by achieving a good balance between the density of the mesh and the presentation of the geometric features.Finally,we discuss future applications of this approach and perspectives of applying machine learning to bridge the gaps between numerical modeling and experiments.

A Robust Optical Encryption Method for Three-Dimensional Object Based on the Fresnel Transform

An optical encryption of three-dimensional (3D) object with digital holography was implemented. In the process of encryption, two holograms involved recording key information and 3D object were obtained. In the process of decryption, the 3D object was reconstructed from the two holograms by extracting the object and key information, followed by multiplication of the two holograms and inverse Fresnel transform numerically. The robustness of the method was also tested for different occlusions attacks and Gaussian noises. The results showed that the method was able to encrypt and decrypt the 3D object while being robust under different occlusions attacks and Gaussian noises.

Three-Dimensional Volumetric Analysis of Venous Malformations for Assessing the Effectiveness of Percutaneous Sclerotherapy

BACKGROUND Percutaneous sclerotherapy can be used to successfully treat venous malformations(VMs)of the head,neck,and limbs.However,the standard curative effect of sclerotherapy has rarely been analyzed,and there is currently no accurate statistical method to measure the volume of VMs after sclerotherapy.Here,we propose a novel threedimensional(3D)reconstruction method to evaluate this effect.OBJECTIVE To test the feasibility of 3D software(MIMICS 19.0)to evaluate the treatment effect of sclerotherapy.METHODS This retrospective study included patients with VMs on the head,neck,and limbs who were treated with ethanol sclerotherapy or foam sclerotherapy every 8 weeks.MIMICS 19.0 was used to calculate the performance of the lesion after treatment and measure the VM volumes before and after the treatment.The effect of the clinical treatment dose on the lesion was evaluated,and the treatment effect of each patient was recorded.The relationship between the number of treatments and the reduced volume of VMs was analyzed.RESULTS Based on the MIMICS-calculated regions of interest(ROI),we found that 1 mL of ethanol reduced the lesion by 473 mm3 and that one dosage of foam(1 mL of polidocanol and 4 mL air content)reduced the lesion by 2138 mm3,demonstrating that the foam sclerosing agent exhibited greater efficacy in this study.CONCLUSIONS The MIMICS 3D volume reconstruction method can effectively and safely evaluate the efficacy of sclerotherapy and provide a preoperative evaluation.This method is simple,accurate,and feasible.

State Accurate Representation and Performance Prediction Algorithm Optimization for Industrial Equipment Based on Digital Twin

The combination of the Industrial Internet of Things(IIoT)and digital twin(DT)technology makes it possible for the DT model to realize the dynamic perception of equipment status and performance.However,conventional digital modeling is weak in the fusion and adjustment ability between virtual and real information.The performance prediction based on experience greatly reduces the inclusiveness and accuracy of the model.In this paper,a DT-IIoT optimization model is proposed to improve the real-time representation and prediction ability of the key equipment state.Firstly,a global real-time feedback and the dynamic adjustment mechanism is established by combining DT-IIoT with algorithm optimization.Secondly,a strong screening dual-model optimization(SSDO)prediction method based on Stacking integration and fusion is proposed in the dynamic regulation mechanism.Lightweight screening and multi-round optimization are used to improve the prediction accuracy of the evolution model.Finally,tak-ing the boiler performance of a power plant in Shanxi as an example,the accurate representation and evolution prediction of boiler steam quantity is realized.The results show that the real-time state representation and life cycle performance prediction of large key equipment is optimized through these methods.The self-lifting ability of the Stacking integration and fusion-based SSDO prediction method is 15.85%on average,and the optimal self-lifting ability is 18.16%.The optimization model reduces the MSE loss from the initial 0.318 to the optimal 0.1074,and increases R2 from the initial 0.731 to the optimal 0.9092.The adaptability and reliability of the model are comprehensively improved,and better prediction and analysis results are achieved.This ensures the stable operation of core equipment,and is of great significance to comprehensively understanding the equipment status and performance.

Digital television transmission based on asynchronous transfer mode

This paper introduces a method to realize digital television transmission based on asynchronous transfer mode (ATM), a technology based on fast packet switching. Choosing the integral multiple length of an ATM cell payload to equal to the length of an MPEG transport stream packet, an MPEG transport stream packet can be inextenso loaded by several ATM cells and trans-formed into ATM cells. Using ATM virtual connection technology and B-ISDN, the interoperability between ATM and DTV may be realized, and DTV signal transmission may also be realized finally.

口腔修复诊疗中构建虚拟患者的机遇与挑战

在口腔修复领域,构建虚拟患者进行数字化仿生修复展现出广阔的应用前景。虚拟患者由包含口颌面部信息的数字化素材构成,能准确地反映出口颌面结构的形态和空间关系。然而,在数字化素材的获取、精确配准过程和动态颌位关系的记录与转移中,均存在诸多挑战。本文将围绕虚拟患者的构建流程,阐述目前构建虚拟患者的关键点和难点,推动虚拟患者技术在口腔修复领域的普及和推广。

土地流转、数字普惠金融和城乡收入差距

在土地大规模流转和城乡收入差距居高不下的双重背景下,农村土地流转能否缩小城乡收入差距,以及数字普惠金融在农村土地流转对城乡收入差距的影响中发挥的作用都是亟待深入研究的问题,但是现有研究较少涉及。基于我国2011—2021年30个省级行政区的面板数据,采用门槛回归模型,分析土地流转对城乡收入差距的非线性影响,以及数字普惠金融在其中的作用机理。结果表明:在数字普惠金融的门槛作用下土地流转能够有效缩小城乡收入差距。在以数字普惠金融为门槛的不同门槛区间,随着土地流转程度的提高城乡收入差距均显著缩小,与数字普惠金融指数低于门槛值时相比,当数字普惠金融指数高于门槛值时土地流转对城乡收入差距的减小作用有所加强。基于此,在促进土地流转、拓宽农民增收致富渠道的同时,建议加强数字普惠金融的城乡发展、提高普通农户的农业生产效率,让数字普惠金融的普惠性落实到农村的建设和发展,为助力土地流转和缩小城乡差距发挥作用。

NFT数字作品交易行为的“发行属性”与适用规则

NFT数字作品交易方兴未艾,但侵权问题频现,亟需合理的规制路径。NFT技术促进数字作品交易客体特定化并产生准物权变动的效果,使NFT数字作品区别于一般数字作品与传统作品,为发行权扩张提供了技术性支撑。但发行权的扩张尚面临诸多困境,包括“有形载体”要件的阻碍、“所有权转移要件”标准不明、发行权与信息网络传播权在数字环境中存在重叠等。基于此,应当厘清数字环境中发行权与信息网络传播权的关系;细化NFT数字作品交易领域的发行权适用标准,完成从“有形载体”到“作品与载体相对应”的转变,明确“出售”及“所有权转移”的认定;以“转让+删除”技术及征收版权转售费作为辅助手段,完成发行权在NFT数字作品交易中的嬗变与适用。