Oxygen tension modulates cell function in an in vitro three-dimensional glioblastoma tumor model

Hypoxia is a typical feature of the tumor microenvironment,one of the most critical factors affecting cell behavior and tumor progression.However,the lack of tumor models able to precisely emulate natural brain tumor tissue has impeded the study of the effects of hypoxia on the progression and growth of tumor cells.This study reports a three-dimensional(3D)brain tumor model obtained by encapsulating U87MG(U87)cells in a hydrogel containing type I collagen.It also documents the effect of various oxygen concentrations(1%,7%,and 21%)in the culture environment on U87 cell morphology,proliferation,viability,cell cycle,apoptosis rate,and migration.Finally,it compares two-dimensional(2D)and 3D cultures.For comparison purposes,cells cultured in flat culture dishes were used as the control(2D model).Cells cultured in the 3D model proliferated more slowly but had a higher apoptosis rate and proportion of cells in the resting phase(G0 phase)/gap I phase(G1 phase)than those cultured in the 2D model.Besides,the two models yielded significantly different cell morphologies.Finally,hypoxia(e.g.,1%O2)affected cell morphology,slowed cell growth,reduced cell viability,and increased the apoptosis rate in the 3D model.These results indicate that the constructed 3D model is effective for investigating the effects of biological and chemical factors on cell morphology and function,and can be more representative of the tumor microenvironment than 2D culture systems.The developed 3D glioblastoma tumor model is equally applicable to other studies in pharmacology and pathology.

Coupled multiphysical model for investigation of influence factors in the application of microbially induced calcite precipitation

The study presents a comprehensive coupled thermo-bio-chemo-hydraulic(T-BCH)modeling framework for stabilizing soils using microbially induced calcite precipitation(MICP).The numerical model considers relevant multiphysics involved in MICP,such as bacterial ureolytic activities,biochemical reactions,multiphase and multicomponent transport,and alteration of the porosity and permeability.The model incorporates multiphysical coupling effects through well-established constitutive relations that connect parameters and variables from different physical fields.It was implemented in the open-source finite element code OpenGeoSys(OGS),and a semi-staggered solution strategy was designed to solve the couplings,allowing for flexible model settings.Therefore,the developed model can be easily adapted to simulate MICP applications in different scenarios.The numerical model was employed to analyze the effect of various factors,including temperature,injection strategies,and application scales.Besides,a TBCH modeling study was conducted on the laboratory-scale domain to analyze the effects of temperature on urease activity and precipitated calcium carbonate.To understand the scale dependency of MICP treatment,a large-scale heterogeneous domain was subjected to variable biochemical injection strategies.The simulations conducted at the field-scale guided the selection of an injection strategy to achieve the desired type and amount of precipitation.Additionally,the study emphasized the potential of numerical models as reliable tools for optimizing future developments in field-scale MICP treatment.The present study demonstrates the potential of this numerical framework for designing and optimizing the MICP applications in laboratory-,prototype-,and field-scale scenarios.

Influence of Production Factors on the Physico-Chemical Characteristics of Fermented Cassava Dough and Sensory Evaluation of Attieke

Attieke is an Ivorian semolina which obtained by fermenting, pressing and steaming cassava dough. Attieke production remains a traditional activity carried out by less literate women. However, perceived differences in measurable factors and attieke qualities require an investigation of their influence on the characteristics of the pressed dough and attieke. The aim of this study is to improve the quality of the dough in relation to that of the attieke produced. The experiment was carried out on 4 production factors, namely the type of boiled or braised ferment, the incorporation rate of the ferment between 8 and 10%, the addition of oil from 0.1 to 1% and the fermentation time from 12 to 15 hours applied to the Improved African Cassava (IAC) variety. A complete experiment design of 16 samples of fermented dough and attieke was employed. These samples underwent physic-chemical analyses for the fermented dough and sensory evaluation for the attieke. It was found that, except for titratable acidity, reducing sugar content and ash content, the physico-chemical characteristics of the dough of IAC variety were significantly influenced by all production factors and their interaction. Fermentation time significantly influences 60% of the physico-chemical characteristics of the fermented dough. The type of ferment, the oil addition and the ferment rate have a significant influence at 40% of these characteristics. At the sensory level, color, acidity and grain binding with an explained variance of 34.60% were essential for the appreciation of the attieke samples. Thus, these production factors could be considered for the improvement of the fermented dough and attieke production process.

Ascertaining the influences of auxiliary qubits on the Einstein–Podolsky–Rosen steering and its directions

Einstein–Podolsky–Rosen(EPR) steering is an example of nontrivial quantum nonlocality and characteristic in the non-classical world.The directivity(or asymmetry) is a fascinating trait of EPR steering,and it is different from other quantum nonlocalities.Here,we consider the strategy in which two atoms compose a two-qubit X state,and the two atoms are owned by Alice and Bob,respectively.The atom of Alice suffers from a reservoir,and the atom of Bob couples with a bit flip channel.The influences of auxiliary qubits on EPR steering and its directions are revealed by means of the entropy uncertainty relation.The results indicate that EPR steering declines with growing time t when adding fewer auxiliary qubits.The EPR steering behaves as damped oscillation when introducing more auxiliary qubits in the strong coupling regime.In the weak coupling regime,the EPR steering monotonously decreases as t increases when coupling auxiliary qubits.The increases in auxiliary qubits are responsible for the fact that the steerability from Alice to Bob(or from Bob to Alice) can be more effectively revealed.Notably,the introductions of more auxiliary qubits can change the situation that steerability from Alice to Bob is certain to a situation in which steerability from Bob to Alice is certain.

Development of a toroidal soft x-ray imaging system and application for investigating three-dimensional plasma on J-TEXT

A toroidal soft x-ray imaging(T-SXRI)system has been developed to investigate threedimensional(3D)plasma physics on J-TEXT.This T-SXRI system consists of three sets of SXR arrays.Two sets are newly developed and located on the vacuum chamber wall at toroidal positionsφof 126.4°and 272.6°,respectively,while one set was established previously atφ=65.50.Each set of SXR arrays consists of three arrays viewing the plasma poloidally,and hence can be used separately to obtain SXR images via the tomographic method.The sawtooth precursor oscillations are measured by T-SXRI,and the corresponding images of perturbative SXR signals are successfully reconstructed at these three toroidal positions,hence providing measurement of the 3D structure of precursor oscillations.The observed 3D structure is consistent with the helical structure of the m/n=1/1 mode.The experimental observation confirms that the T-SXRI system is able to observe 3D structures in the J-TEXT plasma.

A Problem Not to Be Ignored: The Influencing Factors of Mobile Phone Addiction and Its Influence on Sleep Quality

Background and Objective: With the popularity and widespread use of mobile phones, the effects of mobile phone dependence and addiction on individuals’ physical and mental health have attracted more and more attention. The present study aims to analyze the current state of mobile phone addiction and its impact on sleep quality within the population, while also exploring the influence of related factors on sleep quality. Ultimately, this research will provide a scientific foundation for targeted intervention measures and strategies. Methods: A total of 253 permanent residents in Nanjing were randomly selected as study subjects. The Mobile Phone Addiction Index (MPAI) and Pittsburgh Sleep Quality Index (PSQI) were used to evaluate the degree of smartphone addiction and sleep quality of the study subjects. Body mass index (BMI) was measured according to standardized procedures. Independent sample t-test, Chi-square test, rank sum test and multiple linear regression were used to analyze the correlation between mobile phone addiction and sleep quality, and P Results: 117 people (46.2%) were addicted to mobile phones. Chi-square test showed that the rate of mobile phone addiction in drinking group was significantly higher than that in non-drinking group (P P P P P P P P P P Conclusion: Mobile phone addiction may lead to shorter sleep duration and reduce sleep efficiency. The withdrawal of mobile phone addiction may have a negative impact on sleep quality. According to the characteristics of the population, appropriate comprehensive intervention measures should be taken to build an effective evaluation system, so as to reduce the impact of mobile phone addiction and withdrawal problems on sleep and improve sleep quality.

Intraoperative application of three-dimensional printed guides in total hip arthroplasty: A systematic review

BACKGROUND Acetabular component positioning in total hip arthroplasty(THA)is of key importance to ensure satisfactory post-operative outcomes and to minimize the risk of complications.The majority of acetabular components are aligned freehand,without the use of navigation methods.Patient specific instruments(PSI)and three-dimensional(3D)printing of THA placement guides are increasingly used in primary THA to ensure optimal positioning.AIM To summarize the literature on 3D printing in THA and how they improve acetabular component alignment.METHODS PubMed was used to identify and access scientific studies reporting on different 3D printing methods used in THA.Eight studies with 236 hips in 228 patients were included.The studies could be divided into two main categories;3D printed models and 3D printed guides.RESULTS 3D printing in THA helped improve preoperative cup size planning and post-operative Harris hip scores between intervention and control groups(P=0.019,P=0.009).Otherwise,outcome measures were heterogeneous and thus difficult to compare.The overarching consensus between the studies is that the use of 3D guidance tools can assist in improving THA cup positioning and reduce the need for revision THA and the associated costs.CONCLUSION The implementation of 3D printing and PSI for primary THA can significantly improve the positioning accuracy of the acetabular cup component and reduce the number of complications caused by malpositioning.

Influencer identification of dynamical networks based on an information entropy dimension reduction method

Identifying critical nodes or sets in large-scale networks is a fundamental scientific problem and one of the key research directions in the fields of data mining and network science when implementing network attacks, defense, repair and control.Traditional methods usually begin from the centrality, node location or the impact on the largest connected component after node destruction, mainly based on the network structure.However, these algorithms do not consider network state changes.We applied a model that combines a random connectivity matrix and minimal low-dimensional structures to represent network connectivity.By using mean field theory and information entropy to calculate node activity,we calculated the overlap between the random parts and fixed low-dimensional parts to quantify the influence of node impact on network state changes and ranked them by importance.We applied this algorithm and the proposed importance algorithm to the overall analysis and stratified analysis of the C.elegans neural network.We observed a change in the critical entropy of the network state and by utilizing the proposed method we can calculate the nodes that indirectly affect muscle cells through neural layers.

Three-dimensional cell-based strategies for liver regeneration

Liver regeneration and the development of effective therapies for liver failure remain formidable challenges in modern medicine.In recent years,the utilization of 3D cell-based strategies has emerged as a promising approach for addressing these urgent clinical requirements.This review provides a thorough analysis of the application of 3D cell-based approaches to liver regeneration and their potential impact on patients with end-stage liver failure.Here,we discuss various 3D culture models that incorporate hepatocytes and stem cells to restore liver function and ameliorate the consequences of liver failure.Furthermore,we explored the challenges in transitioning these innovative strategies from preclinical studies to clinical applications.The collective insights presented herein highlight the significance of 3D cell-based strategies as a transformative paradigm for liver regeneration and improved patient care.

Computer-assisted three-dimensional individualized extreme liver resection for hepatoblastoma in proximity to the major liver vasculature

BACKGROUND The management of hepatoblastoma(HB)becomes challenging when the tumor remains in close proximity to the major liver vasculature(PMV)even after a full course of neoadjuvant chemotherapy(NAC).In such cases,extreme liver resection can be considered a potential option.AIM To explore whether computer-assisted three-dimensional individualized extreme liver resection is safe and feasible for children with HB who still have PMV after a full course of NAC.METHODS We retrospectively collected data from children with HB who underwent surgical resection at our center from June 2013 to June 2023.We then analyzed the detailed clinical and three-dimensional characteristics of children with HB who still had PMV after a full course of NAC.RESULTS Sixty-seven children diagnosed with HB underwent surgical resection.The age at diagnosis was 21.4±18.8 months,and 40 boys and 27 girls were included.Fifty-nine(88.1%)patients had a single tumor,39(58.2%)of which was located in the right lobe of the liver.A total of 47 patients(70.1%)had PRE-TEXT III or IV.Thirty-nine patients(58.2%)underwent delayed resection.After a full course of NAC,16 patients still had close PMV(within 1 cm in two patients,touching in 11 patients,compressing in four patients,and showing tumor thrombus in three patients).There were 6 patients of tumors in the middle lobe of the liver,and four of those patients exhibited liver anatomy variations.These 16 children underwent extreme liver resection after comprehensive preoperative evaluation.Intraoperative procedures were performed according to the preoperative plan,and the operations were successfully performed.Currently,the 3-year event-free survival of 67 children with HB is 88%.Among the 16 children who underwent extreme liver resection,three experienced recurrence,and one died due to multiple metastases.CONCLUSION Extreme liver resection for HB that is still in close PMV after a full course of NAC is both safe and feasible.This approach not only reduces the necessity for liver transplantation but also results in a favorable prognosis.Individualized three-dimensional surgical planning is beneficial for accurate and complete resection of HB,particularly for assessing vascular involvement,remnant liver volume and anatomical variations.

Integrating Neighborhood Geographic Distribution and Social Structure Influence for Social Media User Geolocation

Geolocating social media users aims to discover the real geographical locations of users from their publicly available data,which can support online location-based applications such as disaster alerts and local content recommen-dations.Social relationship-based methods represent a classical approach for geolocating social media.However,geographically proximate relationships are sparse and challenging to discern within social networks,thereby affecting the accuracy of user geolocation.To address this challenge,we propose user geolocation methods that integrate neighborhood geographical distribution and social structure influence(NGSI)to improve geolocation accuracy.Firstly,we propose a method for evaluating the homophily of locations based on the k-order neighbor-hood geographic distribution(k-NGD)similarity among users.There are notable differences in the distribution of k-NGD similarity between location-proximate and non-location-proximate users.Exploiting this distinction,we filter out non-location-proximate social relationships to enhance location homophily in the social network.To better utilize the location-proximate relationships in social networks,we propose a graph neural network algorithm based on the social structure influence.The algorithm enables us to perform a weighted aggregation of the information of users’multi-hop neighborhood,thereby mitigating the over-smoothing problem of user features and improving user geolocation performance.Experimental results on real social media dataset demonstrate that the neighborhood geographical distribution similarity metric can effectively filter out non-location-proximate social relationships.Moreover,compared with 7 existing social relationship-based user positioning methods,our proposed method can achieve multi-granularity user geolocation and improve the accuracy by 4.84%to 13.28%.

Influence of hypocalcemia on the prognosis of patients with multiple trauma

BACKGROUND Hypocalcemia is highly common in hospitalized patients,especially in those with trauma,On the other hand,abnormal calcium metabolism is an important metabolic challenge;however,it is often neglected and untreated,and certain factors may induce serious neurological and cardiovascular complications.AIM To retrospectively analyze the impact of hypocalcemia on the prognosis of patients with multiple traumas.METHODS The study was conducted from January 2020 to December 2021.Ninety-nine patients with multiple injuries were treated at the critical care medicine department of Fuyang People’s Hospital.The selected indicators included sex,age,and blood calcium and hematocrit levels.Many indicators were observed,including within 24 h of hospitalization,and the prognosis was collected after 28 d.Based on the blood calcium levels,the patients were divided into the following two groups:Normocalcemia and hypocalcemia.Of the 99 patients included,81 had normocalcemia,and 18 had hypocalcemia.Separate experiments were conducted for these two groups.RESULTS There was an association between serum calcium levels and the prognosis of patients with polytrauma.CONCLUSION Clinically,the prognosis of patients with multiple traumas can be preliminarily evaluated based on serum calcium levels.

Influence of transcatheter arterial embolization on symptom distress and fatigue in liver cancer patients

BACKGROUND Hepatocellular carcinoma(HCC)is a prevalent malignancy,and transcatheter arterial embolization(TAE)has emerged as a pivotal therapeutic modality.How-ever,TAE may induce symptom distress and fatigue,adversely affecting the quality of life of patients.AIM To investigate symptom distress,fatigue,and associated factors in HCC patients undergoing TAE.METHODS We used a cross-sectional design and purposive sampling to enroll HCC patients who underwent TAE at our institution from January to December 2022.Question-naires were utilized to collect data on symptom distress and fatigue scores from the first to the third day after TAE.RESULTS Our study revealed a significant reduction in fatigue and symptom distress among patients after TAE.Pain,fatigue,insomnia,fever and abdominal dis-tension were the most common symptoms troubling patients during the first 3 d post-TAE.Marital status,presence of family support,physical functional status,age,and symptom distress were identified as predictors of fatigue in patients.CONCLUSION Healthcare professionals should educate HCC patients on symptom distress and INTRODUCTION Hepatocellular carcinoma(HCC)ranks as the fifth most prevalent cancer and the third leading cause of cancer-related mortality globally.Surgical intervention remains the cornerstone of HCC treatment;however,due to the challenges associated with early diagnosis and the lack of specific diagnostic markers,a considerable proportion of patients are diagnosed at advanced stages,rendering them ineligible for surgical interventions.Transcatheter arterial embolization(TAE)is an interventional therapeutic approach involving the insertion of a fine catheter via the femoral artery to reach the vasculature near the tumor site.TAE aims to obstruct the arterial supply to the tumor by deploying embolic agents,thereby inducing necrosis in cancer cells.This procedure is suitable for patients with good liver function and overall health,particularly those with large HCCs that have not invaded the portal vein[1,2].Nonetheless,following TAE,hepatocytes incur variable degrees of damage,leading to the development of a constel-lation of symptoms reminiscent of acute hepatitis.These symptoms include fatigue and systemic discomfort,such as nausea,vomiting,fever,abdominal pain,as well as transient elevations in aspartate aminotransferase(AST)and alanine aminotransferase(ALT),collectively referred to as postembolization syndrome[3,4].These symptoms may arise due to ischemia of the liver and gallbladder,temporary liver enlargement,and peritoneal irritation.While many studies have explored fatigue and symptom distress in cancer patients both nationally and internationally,with some focusing on symptom distress following transcatheter arterial chemoembolization,there has been limited in-depth investigation into the fatigue and symptom distress resulting from TAE treatment[5-8].Fatigue and pain are both subjective experiences,typically arising from the gradual depletion of energy reserves during the course of illness[9].Fatigue is particularly prevalent among cancer patients,with rates soaring as high as 90%.Despite extensive research exploring cancer-related fatigue and its influencing factors,a unanimous consensus remains elusive.Hence,the primary objective of this study was to investigate the symptom distress and fatigue experienced by liver cancer patients following TAE treatment and to analyze potential contributing factors.

Three-dimensional visualization technology for guiding one-step percutaneous transhepatic cholangioscopic lithotripsy for the treatment of complex hepatolithiasis

BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.

Three-dimensional stability calculation method for high and large composite slopes formed by mining stope and inner dump in adjacent open pits

The 2D limit equilibrium method is widely used for slope stability analysis.However,with the advancement of dump engineering,composite slopes often exhibit significant 3D mechanical effects.Consequently,it is of significant importance to develop an effective 3D stability calculation method for composite slopes to enhance the design and stability control of open-pit slope engineering.Using the composite slope formed by the mining stope and inner dump in Baiyinhua No.1 and No.2 open-pit coal mine as a case study,this research investigates the failure mode of composite slopes and establishes spatial shape equations for the sliding mass.By integrating the shear resistance and sliding force of each row of microstrip columns onto the bottom surface of the strip corresponding to the main sliding surface,a novel 2D equivalent physical and mechanical parameters analysis method for the strips on the main sliding surface of 3D sliding masses is proposed.Subsequently,a comprehensive 3D stability calculation method for composite slopes is developed,and the quantitative relationship between the coordinated development distance and its 3D stability coefficients is examined.The analysis reveals that the failure mode of the composite slope is characterized by cutting-bedding sliding,with the arc serving as the side interface and the weak layer as the bottom interface,while the destabilization mechanism primarily involves shear failure.The spatial form equation of the sliding mass comprises an ellipsoid and weak plane equation.The analysis revealed that when the coordinated development distance is 1500 m,the error rate between the 3D stability calculation result and the 2D stability calculation result of the composite slope is less than 8%,thereby verifying the proposed analytical method of equivalent physical and mechanical parameters and the 3D stability calculation method for composite slopes.Furthermore,the3D stability coefficient of the composite slope exhibits an exponential correlation with the coordinated development distance,with the coefficient gradually decreasing as the coordinated development distance increases.These findings provide a theoretical guideline for designing similar slope shape parameters and conducting stability analysis.

Influence of perinatal factors on full-term low-birth-weight infants and construction of a predictive model

BACKGROUND Being too light at birth can increase the risk of various diseases during infancy.AIM To explore the effect of perinatal factors on term low-birth-weight(LBW)infants and build a predictive model.This model aims to guide the clinical management of pregnant women’s healthcare during pregnancy and support the healthy growth of newborns.METHODS A retrospective analysis was conducted on data from 1794 single full-term pregnant women who gave birth.Newborns were grouped based on birth weight:Those with birth weight<2.5 kg were classified as the low-weight group,and those with birth weight between 2.5 kg and 4 kg were included in the normal group.Multiple logistic regression analysis was used to identify the factors influencing the occurrence of full-term LBW.A risk prediction model was established based on the analysis results.The effectiveness of the model was analyzed using the Hosmer–Leme show test and receiver operating characteristic(ROC)curve to verify the accuracy of the predictions.RESULTS Among the 1794 pregnant women,there were 62 cases of neonatal weight<2.5 kg,resulting in an LBW incidence rate of 3.46%.The factors influencing full-term LBW included low maternal education level[odds ratio(OR)=1.416],fewer prenatal examinations(OR=2.907),insufficient weight gain during pregnancy(OR=3.695),irregular calcium supplementation during pregnancy(OR=1.756),and pregnancy hypertension syndrome(OR=2.192).The prediction model equation was obtained as follows:Logit(P)=0.348×maternal education level+1.067×number of prenatal examinations+1.307×insufficient weight gain during pregnancy+0.563×irregular calcium supplementation during pregnancy+0.785×pregnancy hypertension syndrome−29.164.The area under the ROC curve for this model was 0.853,with a sensitivity of 0.852 and a specificity of 0.821.The Hosmer–Leme show test yieldedχ^(2)=2.185,P=0.449,indicating a good fit.The overall accuracy of the clinical validation model was 81.67%.CONCLUSION The occurrence of full-term LBW is related to maternal education,the number of prenatal examinations,weight gain during pregnancy,calcium supplementation during pregnancy,and pregnancy-induced hypertension.The constructed predictive model can effectively predict the risk of full-term LBW.

Computed tomography three-dimensional reconstruction in the diagnosis of bleeding small intestinal polyps:A case report

BACKGROUND Computed tomography(CT)small bowel three-dimensional(3D)reconstruction is a powerful tool for the diagnosis of small bowel disease and can clearly show the intestinal lumen and wall as well as the outside structure of the wall.The horizontal axis position can show the best adjacent intestinal tube and the lesion between the intestinal tubes,while the coronal position can show the overall view of the small bowel.The ileal end of the localization of the display of excellent,and easy to quantitative measurement of the affected intestinal segments,the sagittal position for the rectum and the pre-sacral lesions show the best,for the discovery of fistulae is also helpful.Sagittal view can show rectal and presacral lesions and is useful for fistula detection.It is suitable for the assessment of inflammatory bowel disease,such as assessment of disease severity and diagnosis and differential diagnosis of the small bowel and mesenteric space-occupying lesions as well as the judgment of small bowel obstruction points.CASE SUMMARY Bleeding caused by small intestinal polyps is often difficult to diagnose in clinical practice.This study reports a 29-year-old male patient who was admitted to the hospital with black stool and abdominal pain for 3 months.Using the combination of CT-3D reconstruction and capsule endoscopy,the condition was diagnosed correctly,and the polyps were removed using single-balloon enteroscopyendoscopic retrograde cholangiopancreatography without postoperative complications.CONCLUSION The role of CT-3D in gastrointestinal diseases was confirmed.CT-3D can assist in the diagnosis and treatment of gastrointestinal diseases in combination with capsule endoscopy and small intestinal microscopy.

Research on Quantitative Identification of Three-Dimensional Connectivity of Fractured-Vuggy Reservoirs

The fractured-vuggy carbonate oil resources in the western basin of China are extremely rich.The connectivity of carbonate reservoirs is complex,and there is still a lack of clear understanding of the development and topological structure of the pore space in fractured-vuggy reservoirs.Thus,effective prediction of fractured-vuggy reservoirs is difficult.In view of this,this work employs adaptive point cloud technology to reproduce the shape and capture the characteristics of a fractured-vuggy reservoir.To identify the complex connectivity among pores,fractures,and vugs,a simplified one-dimensional connectivity model is established by using the meshless connection element method(CEM).Considering that different types of connection units have different flow characteristics,a sequential coupling calculation method that can efficiently calculate reservoir pressure and saturation is developed.By automatic history matching,the dynamic production data is fitted in real-time,and the characteristic parameters of the connection unit are inverted.Simulation results show that the three-dimensional connectivity model of the fractured-vuggy reservoir built in this work is as close as 90%of the fine grid model,while the dynamic simulation efficiency is much higher with good accuracy.

Application of three-dimensional speckle tracking technique in measuring left ventricular myocardial function in patients with diabetes

BACKGROUND Diabetic cardiomyopathy is considered as a chronic complication of diabetes mellitus(DM).Therefore,early detection of left ventricular systolic function(LVSF)damage in DM is essential.AIM To explore the use of the three-dimensional speckle tracking technique(3D-STI)for measuring LVSF in DM patients via meta-analysis.METHODS The electronic databases were retrieved from the initial accessible time to 29 April 2023.The current study involved 9 studies,including 970 subjects.We carried out this meta-analysis to estimate myocardial function in DM compared with controls according to myocardial strain attained by 3D-STI.RESULTS Night articles including 970 subjects were included.No significant difference was detected in the left ventricular ejection fraction between the control and the diabetic group(P>0.05),while differences in global longitudinal strain,global circumferential strain,global radial strain,and global area strain were markedly different between the controls and DM patients(all P<0.05).CONCLUSION The 3D-STI could be applied to accurately measure early LVSF damage in patients with DM.

A Study on the Influence of Social Media Use on Psychological Anxiety among Young Women

To explore the relationship between social influence,social comparison,clarity of self-concept,and psychological anxiety among young women during their usage of social networking sites,our study selected 338 young women aged 14-34 from the social site platforms of Little Red Book and Weibo for questionnaire surveys.The Passive Social Network Utilization Scale,Social Comparison Scale(SCS),Social Influence Questionnaire,Self-Concept Clarity Scale(SCCS),and Generalized Anxiety Disorder Scale(GAD-7)were employed to measure the subjects.Our results show that the frequency of passive social media use is positively related to the level of psychological anxiety.Social comparison,social influence,and unclear self-concepts under social media use are negatively predictive of psychological anxiety.The chain mediation effects indicate that social comparison and social influence under social media use negatively predict the clarity of self-concept,thus having a negative impact on the psychological health of young women.Therefore,young women should strengthen their self-concepts,control their frequency of social media usage,avoid addiction,and pay special attention to their frequency of passive use,in order to protect their psychological health.Our study provides some practical implications and insights regarding the relationship between young women’s social media use and psychological health.