Establishment and Preliminary Application of a Rapid Fluorescent Focus Inhibition Test (RFFIT) for Rabies Virus

The World Health Organization (WHO) standard assay for determining levels of the rabies virus neutralization antibody (RVNA) is the rapid fluorescent focus inhibition test (RFFIT), which is used to evaluate the immunity effect after vaccination against rabies. For RFFIT, CVS-11 was used as the challenge virus, BSR cells as the adapted cells, and WHO rabies immunoglobulin (WHO STD) as the reference serum in this study. With reference to WHO and Pasteur RFFIT procedures, a micro-RFFIT procedure adapted to our laboratory was produced, and its specificity and reproducibility were tested. We tested levels of RVNA in human serum samples after immunization with different human rabies vaccines (domestic purified Vero cell rabies vaccine (PVRV) and imported purified chick embryo cell vaccine (PCECV)) using different regimens (Zagreb regimen and Essen regimen). We analyzed the levels of RVNA, and compared the immune efficacy of domestic PVRV and imported PCECV using different immunization regimens. The results showed that the immune efficacy of domestic PVRV using the Zagreb regimen was as good as that of the imported PCECV, but virus antibodies were generated more rapidly with the Zagreb regimen than with the Essen regimen. The RFFIT procedure established in our laboratory will enhance the comprehensive detection ability of institutions involved in rabies surveillance in China.

Microstructure modeling and virtual test of asphalt mixture based on three-dimensional discrete element method

The objective of this work is to model the microstructure of asphalt mixture and build virtual test for asphalt mixture by using Particle Flow Code in three dimensions(PFC^(3D))based on three-dimensional discrete element method.A randomly generating algorithm was proposed to capture the three-dimensional irregular shape of coarse aggregate.And then,modeling algorithm and method for graded aggregates were built.Based on the combination of modeling of coarse aggregates,asphalt mastic and air voids,three-dimensional virtual sample of asphalt mixture was modeled by using PFC^(3D).Virtual tests for penetration test of aggregate and uniaxial creep test of asphalt mixture were built and conducted by using PFC^(3D).By comparison of the testing results between virtual tests and actual laboratory tests,the validity of the microstructure modeling and virtual test built in this study was verified.Additionally,compared with laboratory test,the virtual test is easier to conduct and has less variability.It is proved that microstructure modeling and virtual test based on three-dimensional discrete element method is a promising way to conduct research of asphalt mixture.

Microdilution inhibition test of Chinese herbs to assess their effect against clinical strains of Ureaplasma urealyticum in vitro

Objective：To explore the antibacterial effect of Chinese crude drugs against clinical strains of Ureaplasma urealyticum（UU）, including eight pure herbs and three compound herbs, and determine their minimal inhibitory concentrations（MICs）. Methods：Isolates were collected from clinical patients with UU infection, and cultured in UU broth. In order to test the different effects on clinical strains of UU, the assays were performed by microdilution inhibition tests, and MICs of the herbs against the clinical strains of UU were calculated. Results：The MICs of eight pure herbs against clinical strains of UU were as follows： Galla Chinensis：0.313-1.25 g/L; Fructus Forsythiae： 1.25-5.00 g/L; Cortex Phellodendri： 1.25-5.00 g/L; Radix Paeoniae Rubra： 1.25-2.50 g/L; Semen Plantaginis：2.50-10.00 g/L; Herba Lysimachiae： 5.00-20.00 g/L; Rhizoma Coptidis： 5.00-20.00g/L, Herba Houttuyniae： 10.00-20.00 g/L. The MICs of compound herbs were： Liuheji： 0.625-2.50 g/L; Bazhengsan： 5.00-20.00 g/L; Wulinsan：2.50-20.0 g/L.Conclusion：Galla Chinensis, Fructus Forsythiae, Cortex Phellodendrim, Radix Paeoniae Rubra, and Semen Plantaginis, exerted the stronger antibacterial effect against clinical strains of UU, whereas Herba Lysimachiae, Rhizoma Coptidis and Herba Houttuyniae, had relatively weaker activity against UU. Compound herbs, Bazhengsan and Wulinsan, and particularly Liuheji, also had antibacterial effects against UU. Further studies of the effects and mechanisms of action of Chinese crude drugs against UU infections are worthwhile.

Three-Dimensional Model Test for Port Engineering with Multi-Directional Waves

-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.

EFFECTS OF SDS,PBS SOLUTIONS UPON FLUORESCENCE VALUES OF DERMATOPHAGOIDES PTERRONYSSINUS RADIOALLERGOSORBENT TEST INHIBITION

Objective To explore the effects of SDS, PBS re-dissolvent solutions on fluorescence values of radioallergosorbent test (RAST) inhibition. Methods Dermatophagoides pterronyssinus allergen immunoCAP and UniCAP 100 System were used. The Sera Pool consisted of 20 Dermatophagoides pterronyssinus allergic patients sera, their specific IgE fluorescence values were between 12 505 and 24 776. Results Fluorescence value percentages decreased: 62.9%, 54.1%, 43.5%, 6.7%, 3.7%, 2.6%, 2.2%, and 1.4% respectively, when SDS concentrations were at 2%, 1%, 0.5%, 0.25%, 0.1%, 0.05%, 0.025%, and 0.01%. Fluorescence values decreased more than 5% with SDS concentrations equal to 0.25% or higher. PBS in 0.1 and 0.01 mol/L concentrations decreased fluorescence values 2.9% and 0.9% respectively. Conclusions SDS is a commonly used surfactants in allergen extract and re-dissolvent prepared allergen precipitation for RAST inhibition. Thus effects of surfactants (e.g. SDS) upon the RAST inhibition tests must be considered when they were used as re-dissolvent agents to improve protein resolution in RAST inhibition.

VISUALIZATION OF THREE-DIMENSIONAL DATA FIELD AND ITS APPLICATION IN MACHINE TESTING

In order to realize visualization of three-dimensional data field （TDDF） in instrument, two methods of visualization of TDDF and the usual manner of quick graphic and image processing are analyzed. And how to use OpenGL technique and the characteristic of analyzed data to construct a TDDF, the ways of reality processing and interactive processing are described. Then the medium geometric element and a related realistic model are constructed by means of the first algorithm. Models obtained for attaching the third dimension in three-dimensional data field are presented. An example for TDDF realization of machine measuring is provided. The analysis of resultant graphic indicates that the three-dimensional graphics built by the method developed is featured by good reality, fast processing and strong interaction

Predicting the Dynamic Behavior of Asphalt Concrete Using Three-dimensional Discrete Element Method

A user-defined three-dimensional （3D） discrete element model was presented to predict the dynamic modulus and phase angle of asphalt concrete （AC）. The 3D discrete element method （DEM） model of AC was constructed employing a user-defined computer program developed using the ＂Fish＂ language in PFC3D. Important microstructural features of AC were modeled, including aggregate gradation, air voids and mastic. The irregular shape of aggregate particle was modeled using a clump of spheres. The developed model was validated through comparing with experimental measurements and then used to simulate the cyclic uniaxial compression test, based on which the dynamic modulus and phase angle were calculated from the output stress- strain relationship. The effects of air void content, aggregate stiffness and volumetric fraction on AC modulus were further investigated. The experimental results show that the 3D DEM model is able to accurately predict both dynamic modulus and phase angle of AC across a range of temperature and loading frequencies. The user- defined 3D model also demonstrated significant improvement over the general existing two-dimensional models.

A generalized three-dimensional failure criterion for rock masses

The smooth convex generalized failure function, which represents 1/6 part of envelope in tile deviatoric plane, is proposed. The proposed function relies on four shape parameters （L, a, b and c）, in which two parameters （a and b） are dependent on the others. The parameter Ls is called extension ratio. The proposed failure function could be incorporated with any two-dimensional （2D） failure criteria to make it a three-dimensional （3D） version. In this paper, a mathematical formulation for incorporation of Hoek-Brown failure criterion with the proposed function is presented. The Hoek-Brown failure criterion is the most suited 2D failure criterion tbr geomaterials. Two types of analyses for best-fitting solution of published true tri-axial test data were made by considering （1） constant extension ratio and （2） variable extension ratio. The shape and strength parameters for different types of rocks have been determined by best-fitting the published true tri-axial test data for both the analyses. It is observed from the best-fitting solution by considering uniform extension ratio （L~） that shape constants have a correlation with Hoek-Brown strength parameters. Thus, only two parameters （c~. and m） are needed for representing the 3D failure criterion for intact rock. The statistical expression between shape and Hoek-Brown strength parameters is given. In the second analysis, when considering varying extension ratio, another parameterfis introduced. The modified extension ratio is related tofand extension ratio. The results at minimum mean misfit for all the nine rocks indicate that the range off varies from 0.7 to 1.0. It is found that mean misfit by considering varying extension ratio is lower than that in the first analysis. But it requires three parameters. A statistical expression betweenfand Hoek-Brown strength parameters has been established. Though coefficient of correlation is not reasonable, we may eliminate it as an extra parameter. At the end of the paper, a methodology has also been given for its application to isotropic jointed rock mass, so that it can be implemented in a numerical code for stability analysis of jointed rock mass structures.

Numerical study on wave loads and motions of two ships advancing in waves by using three-dimensional translating-pulsating source

A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.

EFFECT OF CHRONIC ACE INHIBITIONONGLUCOSE TOLERANCE AND INSULIN SENSITIVITY IN HYPERTENSIVE TYPE 2 DIABETIC PATIENTS

We studied 14 moderately overweight Typo 2 diabetic patients with essential hypertension in stable metabolic control after a run-in period , and again after 3 months of antihypertensive treatment with the angiotensin-converting enzyme (ACF) inhibitor captopril. Glucose tolerance was tested with a 75g oral glucose load (OGTT) and insulin sensitivity was measured by the insulin suppression test (IST) while dietary and drug treatment of the hyperglycemia was maintained constant. In the whole group. mean blood pressure (MBP) fell progressively over 3months from a baseline value of 123± 3 mmHg (1 mmHg= 0. 133 kpa) to a final value of 115± 2 mmHg(P<0. 005). After treatment, fasting plasma glucose, insulin, free fatty acid (FFA). potassium, and glycosylated hemoglobin concentrations were unchanged from baseline. There were no significant differences in glucose tolerance and insulin sensitivity between pre- and post-trearment values. Neither endogenous (oral glucose) nor exogenous (IST) insulin caused any change in plasma potassium concentration. This resistance to the hypokalemic action of insulin was not affected by captopril.

Three-dimensional experimental study of loose top-coal drawing law for longwall top-coal caving mining technology

Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.

Allelopathic Effects of Adonis vernalis L.: Root Growth Inhibition and Cytogenetic Alterations

A possible alternative to synthetic agricultural chemicals is through the use of allelopathy. Adonis species are rich sources of secondary metabolites. Such allelochemicals offer potential for the development of future pesticides. Allelochemicals influence plant growth and cause morphological alterations. This visible effect could be due to primary effects at cellular or molecular level. Changes in the mitotic activity and disturbances in different phases of mitotic division are accepted as indicators of cytotoxic influence. Mitotic abnormalities and induction of micronuclei in interphase cells are parameters used to determine genotoxicity. The purpose of the current study was to establish the possible allelopathic effect of Adonis vernalis L. water extracts through evaluation of root growth inhibition effect and cytogenetic alterations. Adonis vernalis L. growing wild in Bulgaria was used in the present study. Two types of water extracts were prepared: Hot and Cold Water Extract of A. vernalis (HWЕА and СWЕА). A 72-h root growth inhibition test was provided in order to determine the toxicity level of extracts. EC50 values were determined. For toxicity test, seeds of Triticum aestivum L. cv. GTW were used. Cytotoxic and genotoxic potential of water extracts (EC50) were evaluated using Allium cepa L.-test. The EC50 for HWEA and CWEA was determined 1.83 g/l and 0.78 g/l respectively. Significant influence on mitotic activity values and a marked decrease in percentage of telophase cells were observed after treatment with both extracts. Adonis extracts also induced different mitotic abnormalities in root-tip cells of Allium cepa L. The percent of interphase cells with micronuclei increased significantly only after treatment with HWEA. The results indicated growth inhibitory, cytotoxic and genotoxic effects of crude water extracts of A. vernalis L. These effects demonstrated the presence of water soluble allelochemicals in Adonis aerial parts.

In-situ three-dimensional visualization of dynamic tension deformation in ferrite stainless steels

An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.

Cosmetic Safety Evaluation Based on In Vitro Three-dimensional Reconstructed Human Epidermis(3D-RHE) Models

Cosmetic safety evaluation employs a series of toxicological tests, on both qualitative and quantitative levels, to assess the potential risks for the daily use of selected cosmetic ingredients and final products. Traditionally, safety evaluation of cosmetics uses animal tests. With the development of in vitro science and the 3R （Reduction, Replacement and Refinement） principle, three-dimensional reconstructed human epidermis （3D-RHE） models have been developed and widely applied in cosmetic safety evaluation. Reconstructed human skin models possess anatomy and metabolism biology similar to real human tissue. This paper reviews the current application of 3D-RHE models in the safety evaluation of skin irritation, eye irritation, phototoxicity and genotoxicity potential of cosmetic ingredients/formulas. The advantages and disadvantages of using skin models are also discussed, and comments and suggestions are given for its future development.

Physical model test and application of 3D printing rock-like specimens to laminated rock tunnels

Weak structural plane deformation is responsible for the non-uniform large deformation disasters in layered rock tunnels,resulting in steel arch distortion and secondary lining cracking.In this study,a servo biaxial testing system was employed to conduct physical modeling tests on layered rock tunnels with bedding planes of varying dip angles.The influence of structural anisotropy in layered rocks on the micro displacement and strain field of surrounding rocks was analyzed using digital image correlation(DIC)technology.The spatiotemporal evolution of non-uniform deformation of surrounding rocks was investigated,and numerical simulation was performed to verify the experimental results.The findings indicate that the displacement and strain field of the surrounding layered rocks are all maximized at the horizontal bedding planes and decrease linearly with the increasing dip angle.The failure of the layered surrounding rock with different dip angles occurs and extends along the bedding planes.Compressive strain failure occurs after excavation under high horizontal stress.This study provides significant theoretical support for the analysis,prediction,and control of non-uniform deformation of tunnel surrounding rocks.

Mechanical performance evaluation of a new type of cable-stayed beam-arch combination bridge based on field tests

In order to study the mechanical performance of a new type of cable-stayed beam-arch combination bridge, the results of field static and dynamic load tests are comparatively analyzed with numerical results based on the Jingyi bridge straddling the Daxi River in Yixing. First, the test scheme, tasks, the corresponding measure method, as well as the relevant codes are described. Secondly, two sets of three- dimensional finite element models are established. One is Ansys which uses the solid element and the other is Midas which adopts the beam element. Finally, the experimental and analytical results are comparatively analyzed, and they show an agreement with each other. The results show that the bridge possesses adequate load-carrying capacity under all static load cases, but the capacity of dissipating external input energy is insufficient due to the relatively smaller damping ratio. The study results can provide a reference for further study and optimization of this type of bridge. Calibrated finite-element models that reflect the real conditions can be used as a baseline for future maintenance of the bridge.

凝固酶阴性葡萄球菌D-test阳性率及耐药性研究

目的了解院内感染凝固酶阴性葡萄球菌(CNS)D-test阳性率及其耐药性。方法细菌鉴定应用VITEK全自动细菌鉴定分析系统;MIC采用琼脂平板稀释法;D-test采用K-B纸片法,按CLSI规定的标准进行。结果从临床各种感染标本中分离得到50株CNS,其中耐药表型iMLSB(D-test阳性)占44.0%,耐药表型cMLSB占40.0%,耐药表型MSB占14.0%。万古霉素(VAN)、左氧氟沙星(LVF)、阿米卡星(AMK)和头孢唑啉(CFZ)对D-test阳性CNS的抑菌率分别为100%,59.1%,95.5%和90.9%;VAN,LVF,AMK和CFZ的MIC90分别为2.0,8.0,4.0和16.0mg/L;而VAN+LVF,VAN+AMK,VAN+CFZ,LVF+AMK和LVF+CFZ联合后MIC90分别为2.0,1.0,1.0,2.0和4.0mg/L。VAN+LVF,VAN+AMK,VAN+CFZ,LVF+AMK和LVF+CFZ联合的FIC指数<1的协同作用分别为36.4%,31.8%,77.3%,36.4%和36.4%。结论CNS的耐药性越来越高,其耐药机制复杂多样,临床应根据病原菌不同耐药表型和药敏实验结果正确合理的选用抗菌药物。对D-test阳性的CNS引起的重症感染最好用VAN+CFZ或LVF联合用药。

Comparison of RFFIT Tests with Different Standard Sera and Testing Procedures

The World Health Organization （WHO） standard assay for determining antibody level is the rapid fluorescent focus inhibition test （RFFIT） and is used to determine the degree of immunity after vaccination against rabies. To compare the difference in RFFIT results between the laboratories of The National Institute of Infectious Disease in Japan （NIID） and the Chinese Centre for Disease Control （CCDC） as well the influence of the choice of standard serum （STD） for the detection, the two laboratories detection methods were simultaneously manipulated by RFFIT. The reference serums used in NIID and the WHO standard serum used in CCDC were compared in the same RFFIT detection to determine the titer of four sera samples C1, Sl, S2 and S4 in parallel, and the titers of the detected sera samples were calculated using the standard formula for neutralizing antibody titer. No significant difference was found in RFFIT methods from the two laboratories and the RFFIT testing procedures of the two laboratories have good consistency. However, different titers were obtained with the tentative internal standard serum （TI-STD） produced by adjusting to 2.0 IU of WHO standard serum in NIID and the WHO STD. The titer determined with the TI-STD was higher than that determined with WHO STD, This difference appears to be significant and requires further investigation

Heat transfer performance testing of a new type of phase change heat sink for high power light emitting diode

In view of the limitations of solid metal heat sink in the heat dissipation of high power light emitting diode （LED）, a kind of miniaturized phase change heat sink is developed for high power LED packaging. First, the fabrication process of miniaturized phase change heat sink is investigated, upon which all parts of the heat sink are fabricated including main-body and end-cover of the heat sink, the formation of three-dimensional boiling structures at the evaporation end, the sintering of the wick, and the encapsulation of high power LED phase change heat sink. Subsequently, with the assistance of the developed testing system, heat transfer performance of the heat sink is tested under the condition of natural convection, upon which the influence of thermal load and working medium on the heat transfer performance is investigated. Finally, the heat transfer performance of the developed miniaturized phase change heat sink is compared with that of metal solid heat sink. Results show that the developed miniaturized phase change heat sink presents much better heat transfer performance over traditional metal solid heat sink, and is suitable for the packaging of high power LED.