Ultrasmall NiS_(2)Nanocrystals Embedded in Ordered Macroporous Graphenic Carbon Matrix for Efficiently Pseudocapacitive Sodium Storage

Sodium-ion hybrid capacitor(SIHC)is one of the most promising alternatives for large-scale energy storage due to its high energy and power densities,natural abundance,and low cost.However,overcoming the imbalance between slow Na^(+)reaction kinetics of battery-type anodes and rapid ion adsorption/desorption of capacitive cathodes is a significant challenge.Here,we propose the high-rate-performance NiS_(2)@OMGC anode material composed of monodispersed NiS_(2) nanocrystals(8.8±1.7 nm in size)and N,S-co-doped graphenic carbon(GC).The NiS_(2)@OMGC material has a three-dimensionally ordered macroporous(3DOM)morphology,and numerous NiS_(2) nanocrystals are uniformly embedded in GC,forming a core-shell structure in the local area.Ultrafine NiS_(2) nanocrystals and their nano-microstructure demonstrate high pseudocapacitive Na-storage capability and thus excellent rate performance(355.7 mAh/g at 20.0 A/g).A SIHC device fabricated using NiS_(2)@OMGC and commercial activated carbon(AC)cathode exhibits ultrahigh energy densities(197.4 Wh/kg at 398.8 W/kg)and power densities(43.9 kW/kg at 41.3 Wh/kg),together with a long life span.This outcome exemplifies the rational architecture and composition design of this type of anode material.This strategy can be extended to the design and synthesis of a wide range of high-performance electrode materials for energy storage applications.

Synthesis of K-doped three-dimensionally ordered macroporous Mn_(0.5)Ce_(0.5)O_δ catalysts and their catalytic performance for soot oxidation

A series of K-doped Mn0.5Ce0.5Oδ （K-MCO） catalysts with three-dimensionally ordered macroporous （3DOM） structure and different K loadings were successfully synthesized using simple methods. These catalysts exhibited well-defined 3DOM nanostructure, which consisted of extensive interconnecting networks of spherical voids. The effects of the calcination temperature and calcination time on the morphological characteristics and crystalline forms of the catalysts were systematically studied. The catalysts showed high catalytic activity for the combustion of soot. 3DOM 20% K-MCO-4h catalyst, in particular, showed the highest catalytic activity of all of the catalysts studied （e.g., Ts0 = 331 ~C and Smco2 = 95.3%）. The occurrence of structural and synergistic effects among the K, Mn, and Ce atoms in the catalysts was favorable for enhancing their catalytic activity towards the combustion of diesel soot. Furthermore, the temperatures required for the complete combustion of the soot （〈400 ℃） were well within the exhaust temperature range （175-400 ℃）, which means that the accumulated soot can be removed under the conditions of the diesel exhaust gas. These catalysts could therefore be used in numerous practical applications because they are easy to synthesize, exhibit high catalytic activity, and can be made from low cost materials.

Three-dimensional ordered macroporous perovskite-type La_(1-x)K_xNiO_3 catalysts with enhanced catalytic activity for soot combustion: the Effect of K-substitution

Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray scattering elemental mapping, X-ray diffraction, Raman and X-ray photoelectron spectroscopy, and temperature-programmed reduction of H2. Further, their catalytic activity in soot combustion was determined by temperature-programmed oxidation reaction. K substitution into the LaNiO3 lattice led to remarkably improved catalytic activity of this catalyst in soot combustion. Amongst various catalysts, La0.95K0.05NiO3 exhibited the highest activity in soot combustion (with its T50 and CO2 S values being 338 °C and 98.2%, respectively), which is comparable to the catalytic activities of Pt-based catalysts under the condition of poor contact between the soot and the catalyst. K-substitution improves the valence state of Ni and increases the number of oxygen vacancies, thereby leading to increased density of surface-active oxygen species. The active oxygen species play a vital role in catalyzing the elimination of soot. The perovskite-type La1?xKxNiO3 nanocatalysts with 3DOM structure without noble metals have potential for practical applications in the catalytic combustion of diesel soot particles.

Three-dimensionally Ordered Macroporous Phosphotungstic Acid/SiO2 for Efficient Catalytic Oxidative Desulfurization

Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene（DBT） could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.

Three-dimensionally ordered macroporous cross-linked polystyrene incorporating functional group via hydrophilic spacer arm

A versatile and effective method for incorporating functional groups on the pore wall of three-dimensionally ordered macroporous cross-linked polystyrene（3DOM CLPS） by hydrophilic spacer arm has been investigated.The 3DOM CLPS with pore size 865 nm was prepared by sacrifice template method.The hydrophilic spacer arm（polyethylene glycol,molecular weight is 600） was grafted to the 3DOM CLPS via nucleophilic substitution reaction.The other side of active hydroxyl can be further converted into a lot of other functional groups.In this report,the chelating ligand 2-mercaptobenzothiazole（MBZ） group was introduced on the end of the PGE chain to evidence the versatile functionalization approach.The functionalized ordered macroporous materials were characterized by FT-IR,element analyzer,SEM.The results reveal that the pores were successfully bonded with 2-mercaptobenzothiazole groups via hydrophilic spacer arms and the original morphology of ordered macroporous materials were remained after functionalization.The MBZ group density is 0.052 mmol/m^2.The functionalized 3DOM CLPS are expected to application as heavy metal ions adsorbent.

Pore-filling Three-dimensionally Ordered Macroporous Polyimide Composite Proton Conducting Membranes

The silica opal templates were prepared from three silica colloids of different diameters of 230 nm, 500 nm and 1.5 mm by a filtration route. The large-scale stable opal template membranes after sintering the deposited SiO2 opal template can be successfully obtained by optimizing the pH value and NaCl concentration in silica colloidal solutions. The three-dimensionally ordered macroporous（3DOM） polyimide membranes without crack were fabricated by reproducing the structure of silica opal template. We prepared the pore-filling composite proton exchange membranes by filling the 3DOM structure with proton conducting organosilane sol. The result indicates that the composite membranes exhibit higher water uptake than pure filling organosilane gel. The proton conductivity increased with the increasing of pore cell in composite membranes.

A novel adsorbent of three-dimensional ordered macro/mesoporous carbon for removal of malachite green dye

Three-dimensional ordered macro/mesoporous carbon(3DOM/m-C)with high specific surface area was synthesized by colloid crystal template method with chemical activation by KOH and used as the adsorbent for removing malachite green(MG)in aqueous solution.The microstructures of the adsorbents were characterized by FESEM,TEM and BET,and the effects of initial dye concentration,contact time,solution pH,and temperature on adsorption performance were investigated.The results show that the 3DOM/m-C exhibits extremely high adsorption capacity of 3541.1 mg/g within 2 h,which could be attributed to the novel ordered hierarchical structure with mesopores on three-dimensional ordered macroporous carbon walls.And the adsorption behavior conforms to the pseudo-second-order kinetic and Langmuir adsorption isotherm.3DOM/m-C can be recycled after being desorbed by absolute ethanol,and still maintains a high capacity of 2762.06 mg/g after 5 cycles.

Three‑Dimensional Ordered Mesoporous Carbon Spheres Modified with Ultrafine Zinc Oxide Nanoparticles for Enhanced Microwave Absorption Properties

Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in the material research field.Herein,a kind of ultrafine zinc oxide(ZnO)nanoparticles(NPs)supported on three-dimensional(3D)ordered mesoporous carbon spheres(ZnO/OMCS)is prepared from silica inverse opal by using phenolic resol precursor as carbon source.The prepared lightweight ZnO/OMCS nanocomposites exhibit 3D ordered carbon sphere array and highly dispersed ultrafine ZnO NPs on the mesoporous cell walls of carbon spheres.ZnO/OMCS-30 shows microwave absorbing ability with a strong absorption(−39.3 dB at 10.4 GHz with a small thickness of 2 mm)and a broad effective absorption bandwidth(9.1 GHz).The outstanding microwave absorbing ability benefits to the well-dispersed ultrafine ZnO NPs and the 3D ordered mesoporous carbon spheres structure.This work opened up a unique way for developing lightweight and high-efficient carbon-based microwave absorbing materials.

Preparation of the glucose sensor based on three-dimensional ordered macroporous gold film and room temperature ionic liquid

A novel type of glucose sensor was fabricated based on a glucose oxidase(GOD)-N,N-dimethtylformamide(DMF)-[BMIm][BF4] composites modified three-dimensional ordered macroporous(3DOM) gold film electrode.The immobilized GOD exhibits a pair of well-defined reversible peaks in 50 mM pH 7.0 phosphate buffer solutions(PBS),which could be attributed to the redox of flavin adenine dinucleotide(FAD) in GOD.The research results show that ionic liquid([BMIm][BF4]),DMF and 3DOM gold film are crucial for GOD to exhibit a pair of stable and reversible peaks.It is believed that the large active area of 3DOM gold film can increase the amount of immobilized GOD.Simultaneously,the application of IL enhances the stability of GOD and facilitates the electron transfer between GOD and the electrode.The synergetic effect of DMF can help the GOD to maintain its bioactivity better.GOD immobilized on the electrode exhibits the favorable electrocatalytic property to glucose,and the prepared sensor has a linear range from 10 to 125 nM with a detection limit of 3.3 nM at a signal-to-noise ratio of 3σ.The apparent Km(Michaelis-Menten constant) for the enzymatic reaction is 0.018 mM.

Color tunable upconversion emission in CeO_2:Yb,Er three-dimensional ordered macroporous materials

The three-dimensional ordered macroporous CeO2：Yb,Er materials were prepared, and the influence of doping concentra- tion of Yb3＋ or Er3＋ ions on upconversion property was investigated. Green and red upconversion emissions were observed under the excitation of 980 nm at room temperature. It was found that the ratio of red to green upconversion emission intensity increased with increasing of concentration of the Yb3＋ or Er3＋ ions in the three-dimensional ordered macroporous CeO2：Yb,Er materials. When the concentration of Yb3＋ was 10 mol%, pure red upconversion emission was obtained. The varied mechanism of ratio of red to green upconversion emission intensity was discussed with the concentration of Yb3＋ or Er3＋ ions.

Superior performance in visible-light-driven hydrogen evolution reaction of three-dimensionally ordered macroporous SrTiO_(3) decorated with Zn_(x)Cd_(1−x)S

It is of broad interest to develop emerging photocatalysts with excellent light-harvesting capacity and high charge carrier separation efficiency for visible light photocatalytic hydrogen evolution reaction.However,achieving satisfying hydrogen evolution efficiency under noble metal-free conditions remains challenging.In this study,we demonstrate the fabrication of three-dimensionally ordered macroporous SrTiO_(3)decorated with Zn_(x)Cd_(1−x)S nanoparticles for hydrogen production under visible light irradiation(λ>420 nm).Synergetic enhancement of photocatalytic activity is achieved by the slow photon effect and improved separation efficiency of photogenerated charge carriers.The obtained composites could afford very high hydrogen production efficiencies up to 19.67 mmol·g^(−1)·h^(−1),with an apparent quantum efficiency of 35.9%at 420 nm,which is 4.2 and 23.9 times higher than those of pure Zn_(0.5)Cd_(0.5)S(4.67 mmol·g^(−1)·h^(−1))and CdS(0.82 mmol·g^(−1)·h^(−1)),respectively.In particular,under Pt-free conditions,an attractive hydrogen production rate(3.23 mmol·g^(−1)·h^(−1))was achieved,providing a low-cost and high-efficiency strategy to produce hydrogen from water splitting.Moreover,the composites showed excellent stability,and no obvious loss in activity was observed after five cycling tests.

Enhanced photocatalytic performance of Bi_(4)O_(5)Br_(2)with threedimensionally ordered macroporous structure for phenol removal

Herein,a series of three-dimensionally ordered macroporous(3DOM)Bi_(4)O_(5)Br_(2)photocatalysts with different macropore sizes were successfully fabricated via a polymethyl methacrylate(PMMA)template method.The photocatalytic activity for phenol degradation over 3DOM Bi_(4)O_(5)Br_(2)first increased and then decreased with the rise in macropore size.Specifically,3DOM Bi_(4)O_(5)Br_(2)-255(macropore diameter ca.170 nm)exhibits the best photocatalytic activity in the static system,which is about 4.5,7.3,and 11.9 times higher than those of bulk Bi_(4)O_(5)Br_(2),Bi_(2)WO_(6),and g-C_(3)N_(4),respectively.Meanwhile,high phenol conversion(75%)is also obtained over 3DOM Bi_(4)O_(5)Br_(2)-255 in the flow system under full spectrum irradiation.Furthermore,3DOM Bi_(4)O_(5)Br_(2)-255 also shows strong mineralization capacity owing to the downward shift of valance band position(0.15 V)as compared with Bi_(4)O_(5)Br_(2).Total organic carbon(TOC)removal rate over 3DOM Bi_(4)O_(5)Br_(2)-255(62%)is much higher than that of Bi_(4)O_(5)Br_(2)(17%).The enhancement in photocatalytic performance of 3DOM Bi_(4)O_(5)Br_(2)-255 is attributable to its better phenol adsorption,O_(2)activation,and charge separation and transfer abilities.This work combines the advantages of 3D structure and surface dangling bonds,providing new possibilities for designing highly efficient photocatalysts for pollutants removal.

Synthesis of 3D ordered macroporous indium tin oxide using polymer colloidal crystal template

Three-dimensional (3D) ordered macroporous indium tin oxide (ITO) is pre- pared using a polymer colloidal crystal template that is formed by self-assembly of the monodisperse poly(methyl methacrylate) (PMMA) microspheres. The morphologies and BET surface area of the macroporous material is examined by scanning electron micro- scope, transmission electron microscopy and N2 adsorption/desorption. Results indicate that the macroporous material has highly ordered arrays of the uniform pores replicated from the PMMA colloidal crystal template when the polymer colloidal crystal template is removed by calcinations at 500℃. The pore diameter (about 450 nm) of macroporous ITO slightly shrank to the PMMA microspheres. The BET surface area and pore volume of the macroporous material are 389 m2·g-1 and 0.36 cm3·g-1, respectively. Moreover, the macroporous ITO, containing 5 mol% Sn and after annealing under vacuum, shows the minimum resistivity of ρ = 8.2×10-3 Ω· cm. The conductive mechanism of macroporous ITO is discussed, and it is believed that the oxygen vacancies are the major factor for excellent electrical properties.

Immobilization of Glucose Oxidase on Ordered Macroporous Silicas Functionalized with Amino Group

A novel glucose oxidase immobilized on three-dimensionally ordered macroporous （3DOM） material has been prepared by firstly preparation of hybrid 3DOM SiO2-NH2 materials using colloidal crystal method, and following covalent immobilization of glucose oxidase on the pore walls of the 3DOM materials. The materials were characterized by SEM, FTIR, DSC and BET techniques. SEM observation shows that the macropores are highly ordered and are interconnected by small windows. FTIR measurement shows that there are amino and organic groups in the pore walls. The surface area of the 3DOM SiO2-NH2 material is about 10.2 m2/g. The loaded amount of enzyme is increased with amino content in the materials. The immobilized enzyme has high activity, thermal stability and can be reused.

Pt/Co_3O_4/3DOM Al_2O_3:Highly effective catalysts for toluene combustion

Three-dimensionally ordered macro-/mesoporous alumina（3DOM Al2O3）-supported cobalt oxide and platinum nanocatalysts（xPt/yCo3O4/3DOM Al2O3,Pt mass fraction（x%）= 0-1.4%,Co3O4 mass fraction（y%） = 0-9.2%） were prepared using poly（methyl methacrylate） templating,incipient wetness impregnation and polyvinyl alcohol-protected reduction.The resulting xPt/yCo3O4/3DOM Al2O3 samples displayed a high-quality 3DOM architecture with macropores（180-200 nm in diameter） and mesopores（4-6 nm in diameter） together with surface areas in the range of 94 to 102m^2/g.Using these techniques,Co3O4 nanoparticles（NPs,18.3 nm） were loaded on the 3DOM Al2O3 surface,after which Pt NPs（2.3-2.5 nm） were uniformly dispersed on theyCo3O4/3DOM Al2O3.The1.3Pt/8.9Co3O4/3DOM Al2O3 exhibited the best performance for toluene oxidation,with a T（90%） value（the temperature required to achieve 90%toluene conversion） of 160 ℃ at a space velocity of20000 mL g^（-1） h^（-1）.It is concluded that the excellent catalytic performance of the 1.3Pt/8.9Co3O4/3DOM Al2O3 is owing to well-dispersed Pt NPs,the high concentration of adsorbed oxygen species,good low-temperature reducibility,and strong interaction between the Pt and Co3O4 NPs,as well as the unique bimodal porous structure of the support.

三维有序大孔碳的合成及其在染料敏化太阳能电池中的应用

以葡萄糖为碳源、硫酸为脱水剂、聚苯乙烯胶体晶体为模板,采用简单的浸渍-煅烧工艺制备了高度三维有序大孔碳(3DOM-C)材料。利用SEM、FESEM、TEM、紫外-可见光光度计和氮气吸附-脱附分析仪对样品进行了表征,考察了3DOM-C、贵金属Pt和活性碳作为对对电极材料在染料敏化太阳能电池(DSSCs)中的光电转化性能,并进一步对电极进行了电化学阻抗分析。结果表明,3DOM-C材料的孔径约为280 nm,具有三维有序网络空间结构。J-V测试结果显示,3DOM-C/DSSC的光电转化效率为4.61%,达到了Pt/DSSC的90%。阻抗测试结果显示,3DOM-C电极表现出良好的电催化活性及导电性,与Pt电极相近且远高于活性碳。

高比表面积三维有序大孔炭材料的合成与表征

将粒径为540nm的SiO2胶体微球通过自然沉积组装为胶体晶体模板,以葡萄糖的水溶液为前体填充模板间隙,高温炭化后,以HF溶液溶去模板,得到三维有序大孔炭材料。根据SEM检测,大孔以六方有序的方式排列,其孔径及孔径收缩率分别为510nm和5.6%。大孔之间由小窗口连通,构成内部三维交联的大孔网络。低温N2吸附测试表明,大孔孔壁上存在2～10nm为主的中孔孔隙,同时由于前体的表面复制作用,使样品BET比表面积达到948m2/g。XRD表征显示,所制备的3DOM材料由无序石墨结构的炭质组成。

简述胶晶模板法制备三维有序大孔炭材料

三维有序大孔炭(3DOM)材料是近年来刚刚兴起的多孔材料领域一项重要研究课题。3DOM大孔炭材料不仅具有多孔材料的一般特点,还具有孔结构排列周期性强、孔径分布窄、大孔尺寸均匀可调,且具有较大的孔径、较高的表面积等一系列特点,在新型催化、吸附分离、电极材料等方面都具有潜在的应用价值。本文总结了近年来胶晶模板法制备三维有序大孔炭材料,分别从模板的制备、碳源的选择以及到最终大孔炭的制备三个方面加以总结概述。

胶晶模板法制备有序大孔炭材料研究进展

三维有序大孔炭材料(3DOCM)在光子晶体、催化剂载体、生物传感器和电极材料等方面具有潜在的应 用前景,SiO2胶晶模板法是制备有序大孔炭材料的有效方法。制备步骤主要包括SiO2模板的组装、炭前驱填 充及模板去除。本文综合所查文献,对有序大孔炭材料的制备及应用做了简要介绍。

Effects of Au-Ce strong interactions on catalytic activity of Au/CeO_2/3DOM Al_2O_3 catalyst for soot combustion under loose contact conditions

Au/3DOM（three-dimensionally ordered macroporous） Al2O3 and Au/CeO2/3DOM Al2O3 were prepared using a reduction-deposition method and characterized using scanning electron microscopy,N2 adsorption-desorption,X-ray diffraction,transmission electron microscopy,ultraviolet-visible spectroscopy,temperature-programmed hydrogen reduction,and X-ray photoelectron spectroscopy.Au nanoparticles of similar sizes were well dispersed and supported on the inner walls of uniform macropores.The norminal Au loading is 2%.Al-Ce-O solid solution in CeO2/3DOM Al2O3 catalysts can be formed due to the incorporation of Al^3＋ ions into the ceria lattice,which causes the creation of extrinsic oxygen vacancies.The extrinsic oxygen vacancies improved the oxygen-transport properties.The strong metal-support interactions between Au and CeO2 increased the amount of active oxygen on the Au nanoparticle surfaces,and this promoted soot oxidation.The activities of the Au-based catalysts were higher than those of the supports（Al2O3 or CeO2/3DOM Al2O3） at low temperature.Au/CeO2/3DOM Al2O3 had the highest catalytic activity for soot combustion,with T（10）,T（50）,and T（90） values of 273,364,and 412℃,respectively.