The quantitative description of the sequence structure of emulsion-processed SBR and solution-processed SBR (by lithium catalyst)was carried out based on their spectral data Of ^(13)C-NMR.The calculating formulae whic...The quantitative description of the sequence structure of emulsion-processed SBR and solution-processed SBR (by lithium catalyst)was carried out based on their spectral data Of ^(13)C-NMR.The calculating formulae which could be used to obtain diad concentration from the peak intensifies of carbon spectra, average block length, average number of block, and the microstructure composition of the molecular chain were derived. The quantitative result showed that on the molecular chain styrene unit had the tendency to attach to trans-1,4 butadiene unit. The calculated result of the microstructure was in good agreement with that obtained through IR measurement.展开更多
6 Atomic fragment types of organic compound have been defined, and the multilevel atom-pair frequency matrix has been constructed according to the occurrence number in pairs of atomic fragments with different bond len...6 Atomic fragment types of organic compound have been defined, and the multilevel atom-pair frequency matrix has been constructed according to the occurrence number in pairs of atomic fragments with different bond lengths in the molecule. On the basis of them, a novel molecular coding technique： characteristic atom-pair holographic code （CAHC）, is obtained. To some extent, this method exhibits a large number of benefits at the same time. For example, it can calculate 2D molecular topological descriptor easily, operate without difficulty and possess definite physicochemical meaning of 3D molecular structural characterization methods, and may fetch the complicated information of molecule, etc. Therefore, it is appropriate for the study on quantitative structure-property/activity relationship （QSPR/QSAR） of medicines and biological molecules. We attempt in this paper to utilize the method of CAHC to the quantitative prediction of reversed-phase liquid chromatogram （RPLC） retention data of 33 purine derivatives and 24 steroids. The fitting multiple correlation coefficient R2, cross-validated multiple correlation coefficient Q2 and predicted ability Q^2 pred over test set＇s samples of obtained partial least-square （PLS） regression model are respectively 0.990, 0.893 and 0.977, 0.897, 0.941.展开更多
The molecular electronegativity interaction vector （MEIV） was used to describe the molecular structure of 30 selected esters. Two excellent QSTR models were built up by using multiple linear regression （MLR） and p...The molecular electronegativity interaction vector （MEIV） was used to describe the molecular structure of 30 selected esters. Two excellent QSTR models were built up by using multiple linear regression （MLR） and partial least-squares regression （PLS）. The correlation coefficients （R） of the two models were 0.945 and 0.941, respectively. The models were evaluated by performing the cross validation with the leave-one-out （LOO） procedure. The cross-verification correlation coefficients （RCV） of the two models were 0.921 and 0.919, respectively. The results showed that the models constructed in this work could provide estimation stability and favorable predictive ability.展开更多
Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyze...Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyzed the fracture surface characteristics induced by supercritical carbon dioxide(SC-CO_(2))and water in open-hole and perforation completion conditions under triaxial stresses.A simple calculation method was proposed to quantitatively analyze the fracture surface area and roughness in macro-level based on three-dimensional(3D)scanning data.In micro-level,scanning electron micrograph(SEM)was used to analyze the features of fracture surface.The results showed that the surface area of the induced fracture increases with perforation angle for both SC-CO_(2)and water fracturing,and the surface area of SC-CO_(2)-induced fracture is 6.49%e58.57%larger than that of water-induced fracture.The fractal dimension and surface roughness of water-induced fractures increase with the increase in perforation angle,while those of SC-CO_(2)-induced fractures decrease with the increasing perforation angle.A considerable number of microcracks and particle peeling pits can be observed on SC-CO_(2)-induced fracture surface while there are more flat particle surfaces in water-induced fracture surface through SEM images,indicating that fractures tend to propagate along the boundary of the particle for SC-CO_(2)fracturing while water-induced fractures prefer to cut through particles.These findings are of great significance for analyzing fracture mechanism and evaluating fracturing stimulation performance.展开更多
The results of quantitative characters for anatomy in stems of three varieties tomatoes seedlings showed that the cell population between vascular bundle and epidermis, the cellular layers among vascular bundles and t...The results of quantitative characters for anatomy in stems of three varieties tomatoes seedlings showed that the cell population between vascular bundle and epidermis, the cellular layers among vascular bundles and the cell population in an unit area （mm^2） of no vascular bundle areas were similar and there had small difference among three varieties. On the foundation of these studies, the developmental mechanism of tomato seedling stem was discussed.展开更多
文摘The quantitative description of the sequence structure of emulsion-processed SBR and solution-processed SBR (by lithium catalyst)was carried out based on their spectral data Of ^(13)C-NMR.The calculating formulae which could be used to obtain diad concentration from the peak intensifies of carbon spectra, average block length, average number of block, and the microstructure composition of the molecular chain were derived. The quantitative result showed that on the molecular chain styrene unit had the tendency to attach to trans-1,4 butadiene unit. The calculated result of the microstructure was in good agreement with that obtained through IR measurement.
基金This work was supported by the State Key Laboratory of Chemo/Biosensing and Chemometrics Foundation (No. 05-12-1), Fok-Yingtung Educational Foundation (No. 98-7-6) and Chongqing University Innovation Foundation of Science and Technology ( No. 06-1-1)
文摘6 Atomic fragment types of organic compound have been defined, and the multilevel atom-pair frequency matrix has been constructed according to the occurrence number in pairs of atomic fragments with different bond lengths in the molecule. On the basis of them, a novel molecular coding technique： characteristic atom-pair holographic code （CAHC）, is obtained. To some extent, this method exhibits a large number of benefits at the same time. For example, it can calculate 2D molecular topological descriptor easily, operate without difficulty and possess definite physicochemical meaning of 3D molecular structural characterization methods, and may fetch the complicated information of molecule, etc. Therefore, it is appropriate for the study on quantitative structure-property/activity relationship （QSPR/QSAR） of medicines and biological molecules. We attempt in this paper to utilize the method of CAHC to the quantitative prediction of reversed-phase liquid chromatogram （RPLC） retention data of 33 purine derivatives and 24 steroids. The fitting multiple correlation coefficient R2, cross-validated multiple correlation coefficient Q2 and predicted ability Q^2 pred over test set＇s samples of obtained partial least-square （PLS） regression model are respectively 0.990, 0.893 and 0.977, 0.897, 0.941.
基金supported by the Youth Foundation of Education Bureau, Sichuan Province (09ZB036)Technology Bureau, Sichuan Province (2006j13-141)
文摘The molecular electronegativity interaction vector （MEIV） was used to describe the molecular structure of 30 selected esters. Two excellent QSTR models were built up by using multiple linear regression （MLR） and partial least-squares regression （PLS）. The correlation coefficients （R） of the two models were 0.945 and 0.941, respectively. The models were evaluated by performing the cross validation with the leave-one-out （LOO） procedure. The cross-verification correlation coefficients （RCV） of the two models were 0.921 and 0.919, respectively. The results showed that the models constructed in this work could provide estimation stability and favorable predictive ability.
基金National Natural Science Foundation of China(Grant No.51804318)the China Postdoctoral Science Foundation Founded Project(Grant No.2019M650963)National Key Basic Research and Development Program of China(Grant No.2014CB239203).
文摘Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyzed the fracture surface characteristics induced by supercritical carbon dioxide(SC-CO_(2))and water in open-hole and perforation completion conditions under triaxial stresses.A simple calculation method was proposed to quantitatively analyze the fracture surface area and roughness in macro-level based on three-dimensional(3D)scanning data.In micro-level,scanning electron micrograph(SEM)was used to analyze the features of fracture surface.The results showed that the surface area of the induced fracture increases with perforation angle for both SC-CO_(2)and water fracturing,and the surface area of SC-CO_(2)-induced fracture is 6.49%e58.57%larger than that of water-induced fracture.The fractal dimension and surface roughness of water-induced fractures increase with the increase in perforation angle,while those of SC-CO_(2)-induced fractures decrease with the increasing perforation angle.A considerable number of microcracks and particle peeling pits can be observed on SC-CO_(2)-induced fracture surface while there are more flat particle surfaces in water-induced fracture surface through SEM images,indicating that fractures tend to propagate along the boundary of the particle for SC-CO_(2)fracturing while water-induced fractures prefer to cut through particles.These findings are of great significance for analyzing fracture mechanism and evaluating fracturing stimulation performance.
基金Supported by Committee of Nature Science Foundation of Heilongjiang Province (C2005-32)Post-doctoral Science Committee of China (LRB04-217)Scientific Research Start Committee of Northeast Agricultural University
文摘The results of quantitative characters for anatomy in stems of three varieties tomatoes seedlings showed that the cell population between vascular bundle and epidermis, the cellular layers among vascular bundles and the cell population in an unit area （mm^2） of no vascular bundle areas were similar and there had small difference among three varieties. On the foundation of these studies, the developmental mechanism of tomato seedling stem was discussed.
