Machine learning for carbonate formation drilling: Mud loss prediction using seismic attributes and mud loss records

Due to the complexity and variability of carbonate formation leakage zones, lost circulation prediction and control is one of the major challenges of carbonate drilling. It raises well-control risks and production expenses. This research utilizes the H oilfield as an example, employs seismic features to analyze mud loss prediction, and produces a complete set of pre-drilling mud loss prediction solutions. Firstly, 16seismic attributes are calculated based on the post-stack seismic data, and the mud loss rate per unit footage is specified. The sample set is constructed by extracting each attribute from the seismic trace surrounding 15 typical wells, with a ratio of 8:2 between the training set and the test set. With the calibration results for mud loss rate per unit footage, the nonlinear mapping relationship between seismic attributes and mud loss rate per unit size is established using the mixed density network model.Then, the influence of the number of sub-Gausses and the uncertainty coefficient on the model's prediction is evaluated. Finally, the model is used in conjunction with downhole drilling conditions to assess the risk of mud loss in various layers and along the wellbore trajectory. The study demonstrates that the mean relative errors of the model for training data and test data are 6.9% and 7.5%, respectively, and that R2is 90% and 88%, respectively, for training data and test data. The accuracy and efficacy of mud loss prediction may be greatly enhanced by combining 16 seismic attributes with the mud loss rate per unit footage and applying machine learning methods. The mud loss prediction model based on the MDN model can not only predict the mud loss rate but also objectively evaluate the prediction based on the quality of the data and the model.

Numerical Simulation of Bubble Plumes and an Analysis of Their Seismic Attributes

To study the bubble plume's seismic response characteristics,the model of a plume water body has been built in this article using the bubble-contained medium acoustic velocity model and the stochastic medium theory based on an analysis of both the acoustic characteristics of a bubble-contained water body and the actual features of a plume.The finite difference method is used for forward modelling,and the single-shot seismic record exhibits the characteristics of a scattered wave field generated by a plume.A meaningful conclusion is obtained by extracting seismic attributes from the pre-stack shot gather record of a plume.The values of the amplitude-related seismic attributes increase greatly as the bubble content goes up,and changes in bubble radius will not cause seismic attributes to change,which is primarily observed because the bubble content has a strong impact on the plume's acoustic velocity,while the bubble radius has a weak impact on the acoustic velocity.The above conclusion provides a theoretical reference for identifying hydrate plumes using seismic methods and contributes to further study on hydrate decomposition and migration,as well as on distribution of the methane bubble in seawater.

Seismic attributes and integrated prediction of fractured and caved carbonate reservoirs in the Tarim Basin,China

The carbonate reservoirs in the Tarim Basin are characterized by anisotropy and strong heterogeneity.Combined with an integrated analysis of data from seismic,geology,and drilling results,a series of attributes which are suitable for fractured and caved carbonate reservoir prediction is discussed,including amplitude,coherence analysis,spectra decomposition,seismic absorption attenuation analysis and impedance inversion.Moreover,3-D optimization of these attributes is achieved by integration of multivariate discriminant analysis and principle component analysis,where the logging data are taken as training samples.Using the optimized results,the spatial distribution and configuration features of the caved reservoirs can be characterized in detail.This technique not only improves the understanding of the spatial distribution of current reservoirs but also provides a significant basis for the discovery and production of carbonate reservoirs in the Tarim Basin.

Three-dimensional seismic isolation bearing and its application in long span hangars

Based on the seismic response characteristics of space frame structures,a new type of seismic isolation bearing defined as a three-dimensional seismic isolation bearing（3DSIB） is developed in this paper.The bearing offers excellent properties such as multi-dimensional seismic isolation,reasonable rotation capability,good ability to resist lifting load,uncoupled stiffness in horizontal and vertical directions,etc.In the 3DSIB,the horizontal dimension is designed by combining the Teflon sliding device and helical spring,while the vertical dimension is developed by introducing disk springs or helical springs.The mathematical model of the 3DSIB was established and its performance with the critical parameters was tested on a shaking table.Furthermore,the 3DSIB was applied in a 120 m span hangar structure and simulated using SAP2000 software to evaluate its performance in practical structures.The performance of the structures with and without 3DSIB was compared.It is shown that the hangar structure with 3D bearings achieves a better performance.The axial force and acceleration response of the structures with 3DSIB are effectively reduced,while the displacement response of the bearing is within the predetermined range.

Limit analysis for the seismic stability of three-dimensional rock slopes using the generalized Hoek-Brown criterion

The parameters that influence slope stability and their criteria of failure are fairly understood but over-conservative design approaches are often preferred,which can result in excessive overburden removal that may jeopardize profitability in the context of open pit mining.Numerical methods such as finite element and discrete element modelling are instrumental to identify specific zones of stability,but they remain approximate and do not pinpoint the critical factors that influence stability without extensive parametric studies.A large number of degrees of freedom and input parameters may make the outcome of numerical modelling insufficient compared to analytical solutions.Existing analytical approaches have not tackled the stability of slopes using non-linear plasticity criteria and threedimensional failure mechanisms.This paper bridges this gap by using the yield design theory and the Hoek-Brown criterion.Moreover,the proposed model includes the effect of seismic forces,which are not always taken into account in slope stability analyses.The results are presented in the form of rigorous mathematical expressions and stability charts involving the loading conditions and the rock mass properties emanating from the plasticity criterion.

Research and application on three-dimensional seismic and vibration isolation for building

This paper presents the study of a three-dimensional(3D) isolation system.Firstly,the authors investigated the effects of an innovative 3D isolator,which was composed of a connecting plate,a rubber pad for vibration isolation in the vertical direction and a horizontal rubber bearing for seismic isolation in both horizontal directions.Secondly,the authors designed such a vibration isolation system and installed it underneath two specific residential buildings which were built directly over an existing subway communication hub platform in Beijing.These buildings required good performance vibration and seismic isolation system to reduce the impact from the running of nearby subway trains.Finally,in situ tests were conducted for both the isolated and the non-isolated buildings for the purpose of comparison.The test results showed that the maximum acceleration response level of the isolated superstructure is reduced by 10% as compared to that of the platform.The maximum attenuation of vibration reaches up to 25 dB.The 3D system explored in this paper is very effective in control and suppression of building vibration induced by earthquakes or running of trains.

Reservoir prediction using multi-wave seismic attributes

The main problems in seismic attribute technology are the redundancy of data and the uncertainty of attributes, and these problems become much more serious in multi-wave seismic exploration. Data redundancy will increase the burden on interpreters, occupy large computer memory, take much more computing time, conceal the effective information, and especially cause the ＂curse of dimension＂. Uncertainty of attributes will reduce the accuracy of rebuilding the relationship between attributes and geological significance. In order to solve these problems, we study methods of principal component analysis （PCA）, independent component analysis （ICA） for attribute optimization and support vector machine （SVM） for reservoir prediction. We propose a flow chart of multi-wave seismic attribute process and further apply it to multi-wave seismic reservoir prediction. The processing results of real seismic data demonstrate that reservoir prediction based on combination of PP- and PS-wave attributes, compared with that based on traditional PP-wave attributes, can improve the prediction accuracy.

Three-dimensional seismic velocity tomography of the upper crust in Tengchong volcanic area, Yunnan Province

Based on data collected by deep seismic sounding carried out in 1999, a three-dimensional P wave velocity structure is determined with tomographic inversion. The tomographic result shows that there is a P wave low velocity zone (LVZ) in the upper crust beneath the Tengchong volcanic area. The LVZ is in the depth of 7~8 km and may be a smgma chamber or a partial melting body. The result also shows that the LVZ is in the northeastern side of the Rehai hydrothermal field, which is located in another LVZ near the surface. The shallow LVZ may represent a well-developed fracture zone. The strong hydrothermal activity in Rehai area can attribute to the existence of fractures between two LVZs. These fractures are the channels for going upwards of the deep hot fluid.

Seismic attributes optimization and application in reservoir prediction

石油地球物理学者认识到与油和煤气的水库有关的许多参数用地震属性数据被预言。然而，优化地震属性，预言薄沙岩水库的特性，并且提高水库描述精确性的最好怎么是为地质学家和地球物理学者的一个重要目标。基于主要部件分析的理论，我们在场一个新优化方法，叫的抑制主要部件分析。在一个油矿的当模特儿的估计和真实申请证明它能提高水库预言精确性并且有更好的适用性。

Application of Seismic Attributes for Delineation of Channel Geometries and Analysis of Various Aspects in Terms of Lithological and Structural Perspectives of Lower Goru Formation, Pakistan

Miano area is one of the distinct major hydrocarbon producing fields of the Lower Indus basin. Lower Goru is the reservoir strait in this area. The aim of the present study is to exploit the channels reservoirs and other stratigraphic features in such a terrain where there is always a challenge for the geoscientist to search and exploit the channeled reservoirs. To resolve this issue we have utilized attribute analysis on high resolution 3D-seismic data for the detailed comparative studies for the channels. There are many astonishing features that are identified in the current study, which could not otherwise be easily enhanced with the help of 2D Seismic Data. Seismic attributes such as coherency, frequency (are also appropriate for lithological discrimination), which are sensitive to the channel edges are applied for the channel delineation and their geometrical analysis. Spectral decomposition techniques are also applied for the delineation of channels and to appropriately select the best band for channels identification. Three types of channel geometries are recognized: 1) highly sinuous channel;2) narrow-broad meandering belts;3) moderate to high sinuous channel. NW-SE, N-W trending faults can be helpful to compartmentalize the reservoir. Instantaneous and dominant frequency are more beneficial for further field development based on Gamma Ray logs from nearby drilled wells and dimensional perspectives analysis of the channel reservoir.

The Integrated Approach to Seismic Attributes of Lithological Characterization of Reservoirs: Case of the F3 Block, North Sea-Dutch Sector

Technological development, particularly the development of signal processing, has contributed to the improvement of the quality of results in the analysis of the characteristics of hydrocarbon reservoirs. This scientific advance is especially marked by the introduction of seismic attributes in the characterization of reservoirs. This paper is aimed at evaluating the contribution of seismic attributes in the lithological characterization of hydrocarbon accumulation zones. Thus, it has been found that instantaneous attributes make it possible to highlight the different properties of reservoir rocks. Techniques for extracting three-dimensional volume attributes have been applied to a 3D seismic data volume of the F3 block in the Dutch sector of the North Sea. The purpose of using these volume attributes is to extract signal characteristics from lithofacies in hydrocarbon zones. The results provide a remarkable contribution to instantaneous seismic attributes in reservoir location, hydrocarbon detection, and reservoir lithological prediction. The instantaneous amplitude, the derivative of amplitude 1, the factor Q, the energy and the Hilbert transform are attributes which highlight the presence of hydrocarbons through the bright spots. Thus, curvature, similarity, dip, and coherence are useful in the determination of traps such as faults and anticlines. The crossing of the instantaneous amplitude and the instantaneous frequency makes it possible to analyze the lithofacies. In the same way, the analysis of the crossed diagrams between the porosity and the instantaneous amplitude made it possible to define the different layers of the reservoir.

Application of AVO and Seismic Attributes Techniques for Characterizing Pliocene Sand Reservoirs in Darfeel Field, Eastern Mediterranean, Egypt

Mediterranean Sea considered as a main hydrocarbon province in Egypt as a huge reservoirs have been discovered till now. Port Fouad marine is a gas and condensate field located in Eastern Mediterranean Sea about 30 KM off Egyptian coast, in a water depth of about 30 m. The Concession is operated by PETROBEL on behalf of Petrosaid (Port Said Petroleum Company). The field was put on production on April 1996, from the Miocene turbidities sands of Wakar Formation plus Pilocene Kafr EL Sheikh Formation. Darfeel field is located within Port Fouad Concession, seven wells have been drilled till now and producing from Pliocene section (Kafr El Sheikh Formation). Pliocene is the main reservoir in Darfeel field which characterized by turbidities sand stone. The aim of this work is to identify the distribution of turbidities sand and characterize sand reservoirs using AVO (amplitude verses offset) and seismic attributes techniques. The workflow is starting from conventional seismic interpretation, maps (time, depth, and amplitude), depositional environments, and finally structure setting. In addition to use some of unconventional seismic interpretation such as seismic attributes. AVO analysis and attributes had been applied in a temp of differentiate between gas sand reservoirs and non-gas reservoirs. The final result aid to identify the reservoir distribution and characterization of sand reservoirs through the field. So, the use of different seismic techniques is powerful techniques in identifying reservoir distribution.

Modeling of the Shale Volume in the Hendijan Oil Field Using Seismic Attributes and Artificial Neural Networks

Petrophysical properties have played an important and definitive role in the study of oil and gas reservoirs,necessitating that diverse kinds of information are used to infer these properties.In this study,the seismic data related to the Hendijan oil field were utilised,along with the available logs of 7 wells of this field,in order to use the extracted relationships between seismic attributes and the values of the shale volume in the wells to estimate the shale volume in wells intervals.After the overall survey of data,a seismic line was selected and seismic inversion methods(model-based,band limited and sparse spike inversion)were applied to it.Amongst all of these techniques,the model-based method presented the better results.By using seismic attributes and artificial neural networks,the shale volume was then estimated using three types of neural networks,namely the probabilistic neural network(PNN),multi-layer feed-forward network(MLFN)and radial basic function network(RBFN).

Integrating the geology, seismic attributes, and production of reservoirs to adjust interwell areas: A case from the Mangyshlak Basin of West Kazakhstan

Dynamic models of the seismic,geological,and flow characteristics of a reservoir are the main tool used to evaluate the potential of drilling new infill wells.Static geological models are mainly based on borehole data combined with dynamic analyses of production dynamics.They are used to determine the redevelopment of and adjustments to new drilling locations;however,such models rarely incorporate seismic data.Consequently,it is difficult to control the changes in geological models between wells,which results in the configuration of well positions and predicted results being less than ideal.To improve the development of adjusted areas in terms of their remaining oil contents,we developed a new integrated analysis that combines static sediment modelling,including microfacies analysis(among other reservoir and seismic properties),with production behaviours.Here,we illustrate this new process by(1)establishing favourable areas for static geological analysis;(2)studying well recompletion potential and the condition of non-producing wells;(3)conducting interwell analyses with seismic and sedimentary data;(4)identifying potential sites constrained by seismic and geological studies,as well as initial oilfield production;(5)providing suggestions in a new well development plan.

Estimation of reservoir porosity using probabilistic neural network and seismic attributes

Porosity is one of the most important properties of oil and gas reservoirs. The porosity data that come from well log are only available at well points. It is necessary to use other method to estimate reservoir porosity.Seismic data contain abundant lithological information. Because there are inherent correlations between reservoir property and seismic data,it is possible to estimate reservoir porosity by using seismic data and attributes.Probabilistic neural network is a powerful tool to extract mathematical relation between two data sets. It has been used to extract the mathematical relation between porosity and seismic attributes. Firstly,a seismic impedance volume is calculated by seismic inversion. Secondly,several appropriate seismic attributes are extracted by using multi-regression analysis. Then a probabilistic neural network model is trained to obtain a mathematical relation between porosity and seismic attributes. Finally,this trained probabilistic neural network model is implemented to calculate a porosity data volume. This methodology could be utilized to find advantageous areas at the early stage of exploration. It is also helpful for the establishment of a reservoir model at the stage of reservoir development.

Applications of Amplitude versus Offset and Seismic Attributes for Perceiving Messinian Reservoirs in Nidoco Field, Nile Delta, Egypt

Nile Delta which covers approximately 60,000 square kilometers represents the most important gas province in Egypt whereas its fields provide two-thirds of the gas production in Egypt. The Nile Delta province begins to display its hydrocarbon potentiality in the early 1960s. Nidoco field is located in the shallow water offshore Nile delta. Abu Madi formation (Messinian age) is the most important formation through all the section where it represents the main gas producing reservoirs in the Field. The production of the field is coming from two sand reservoir levels;Abu Madi level 2&3 which are characterized by fluvial-deltaic sandstones. The purpose of this paper is to perceive the Messinian gas bearing reservoirs and channelized sand distribution inside Abu Madi formation using seismic attributes and amplitude versus offset (AVO) technique. The results indicated that the seismic attributes and AVO aided to give a complete picture about the Messinian reservoirs distribution and characterization in the field. Also the results show that there are still promising locations of prospective Abu Madi Level 2&3 which are proposed to be drilled in the field.

Analysis of Information of Oil-bearing Reservoir Using Seismic Attributes Technique——A Case Study of HD4 Oilfield, Tarim Basin

The theoretical and practical analysis of reservoir thickness and oil-bearing information of thin reservoirs is performed by using seismic attributes and forward modelling. The results show that thin reservoir can be recognized using seismic attributes technique when its thickness is less than 1/4 of wavelength. Through analyzing the influence of tuning effect, the relationship between thin layer thickness and tuning amplitude is well revealed. A precise structure interpretation is conducted using relative amplitude preserved high-resolution seismic data. By taking the geologic condition and well data into account, the distribution of oil and gas of HD4 oilfield is analyzed and predicted. based on seismic attributes. The result is helpful to promote the exploration and development in this oilfield.

Correction of seismic attribute-based smallstructure prediction errors using GPR data-a case study of the Shuguang Coal Mine,Shanxi

Small structures in coal mine working face is one of the main hidden dangers of safe and effi cient production in coal mine.Currently,seismic exploration is often used as the main method for detecting such structures.However,limited by the accuracy of seismic data processing and interpretation,the interpreted location of small structures is often deviated.Ground-penetrating radar(GPR)can detect small structures accurately,but the exploration depth is shallow.The combination of the two methods can improve the exploration accuracy of small structures in coal mine.Aiming at the 1226#working face of Shuguang coal mine,we propose a method of seismic-attributes based small-structure prediction error correction using GPR data.First,we extract the coherence,curvature,and dip attributes from seismic data,that are sensitive to small structures,then by considering factors such as the eff ective detection range of GPR and detection environment,we select two structures from the prediction results of seismic attributes for GPR detection.Finally,based on the relationship between the positions of small structures predicted by the two methods,we use statistical methods to determine the overall off set distance and azimuth of the small structures in the entire study area and use the results as a standard for correcting each structure position.The results show that the GPR data can be used to correct the horizontal position errors of small structures predicted by seismic attribute analysis.The accuracy of the prediction results is greatly improved,with the error controlled within 5 m and reduced by more than 80%.Therefore,the feasibility of the method proposed in this study is verified.

Forward modeling and inversion of the relation model between the gas content of plume and its seismic attribute

The methane bubble plume attracts interest because it offers direct evidence of seafloor gas leakage and plays an indirect role in the exploration and identification of natural gas hydrate.In this study,based on established plume models and their migration sections,three amplitude-class attributes were extracted from three formations for the migration sections of five plumes,and the correlation between the gas content and seismic attribute was obtained.As the gas content increases,the amplitude attribute correspondingly increases,and the linear correlation is relatively good.Moreover,correlation coefficients between gas content and amplitude attributes are close to 1.0.By using linear fitting,the relation model between the gas content of the plume and the seismic attribute was obtained.The relation model was subsequently used to invert the gas content from a real databearing plume.Comparison of the gas content section of the plume with the attribute section and real seismic section reveals common distribution characteristics,namely,the color of the section in the lower right corner is dark.If the amplitude value is large in the seismic section of the real plume,the amplitude attribute value is also large in the corresponding attribute section,and the inverted value of the gas content is also large(because gas content and amplitude are linearly correlated),which indicates that the plume bubbles of the section in the lower right corner is intensively distributed.Finally,the obtained gas content section of the plume can reflect the distribution of the plume bubble content more simply and intuitively,from which the distribution law of seafloor bubbles can be deduced,and this lays a foundation for the further estimation of the gas content of the plume and hydrate reserves.

Three-dimensional P velocity structure in Beijing area

A detail three-dimensional P wave velocity structure of Beijing, Tianjin and Tangshan area (BTT area) was deter-mined by inverting local earthquake data. In total 16 048 P wave first arrival times from 16048 shallow and mid-depth crustal earthquakes, which occurred in and around the BTT area from 1992 to 1999 were used. The first arrival times are recorded by Northern China United Telemetry Seismic Network and Yanqing-Huailai Digital Seismic Network. Hypocentral parameters of 1 132 earthquakes with magnitude ML=1.7~6.2 and the three-dimensional P wave velocity structure were obtained simultaneously. The inversion result reveals the com-plicated lateral heterogeneity of P wave velocity structure around BTT area. The tomographic images obtained are also found to explain other seismological observations well.