Prediction of the amount of urban waste solids by applying a gray theoretical model

Urban waste solids are now becoming one of the most crucial environmental problems. There are several different kinds of technologies normally used for waste solids disposal, among which landfill is more favorable in China than others, especially for urban waste solids. Most of the design works up to now are based on a roughly estimation of the amount of urban waste solids without any theoretical support, which lead to a series problems. To meet the basic information requirements for the design work, the amount of the urban waste solids was predicted in this research by applying the gray theoretical model GM (1,1) through non linear differential equation simulation. The model parameters were estimated with the least square method (LSM) by running a certain MATALAB program, and the hypothesis test results show that the residual between the prediction value and the actual value approximately comply with the normal distribution N (0,0 21 2), and the probability of the residual within the range (-0 17, 0 19) is more than 95%, which indicate obviously that the model can be well used for the prediction of the amount of waste solids and those had been already testified by the latest two years data about the urban waste solids from Loudi City of China. With this model, the predicted amount of the waste solids produced in Loudi City in the next 30 years is 8049000 ton in total.

Experimental, Numerical and Simplified Theoretical Model Study for Internal Solitary Wave Load on FPSO with Emphasis on Scale Effect

Scale effect of ISWs loads on Floating Production Storage and Offloading(FPSO) is studied in this paper. The application conditions of KdV, eKdV and MCC ISWs theories are used in the numerical method. The depthaveraged velocities induced by ISWs are used for the velocity-inlet boundary. Three scale ratio numerical models λ=1, 20 and 300 were selected, which the scale ratio is the size ratio of numerical models to the experimental model.The comparisons between the numerical and former experimental results are performed to verify the feasibility of numerical method. The comparisons between the numerical and simplified theoretical results are performed to discuss the applicability of the simplified theoretical model summarized from the load experiments. Firstly, the numerical results of λ=1 numerical model showed a good agreement with former experimental and simplified theoretical results. It is feasible to simulate the ISWs loads on FPSO by the numerical method. Secondly, the comparisons between the results of three scale ratio numerical models and experimental results indicated that the scale ratios have more significant influence on the experimental horizontal forces than the vertical forces. The scale effect of horizontal forces mainly results from the different viscosity effects associated with the model’s dimension.Finally, through the comparisons between the numerical and simplified theoretical results for three scale ratio models, the simplified theoretical model of the pressure difference and friction forces exerted by ISWs on FPSO is applied for large-scale or full-scale FPSO.

A theoretical model of collision between soft-spheres with Hertz elastic loading and nonlinear plastic unloading

This paper presents a theoretical model on the normal(head-on) collision between soft-spheres on the basis of elastic loading of the Hertz contact for compression process and a nonlinear plastic unloading for restitution one,in which the parameters all are determined in terms of the material and geometric ones of the spheres,and the behaviors of perfect elastic,inelastic,and perfect plastic collisions appeared in the classical mechanics are fully described once a value of coefficient of restitution is specified in the region of 0 ≤ ε ≤ 1.After an empirical formula of the coefficient of restitution dependent on the impact velocity is suggested to fit the existing experimental measurements by means of the least square method,the predictions of the dependency and the collision duration are in well quantitative agreement with their experimental measurements.It is found that the measurable quantities are dependent on both the impact velocity and the parameters of spheres.Following this model,finally,an approach to determine the spring coefficient in the linear viscoelastic model of the collision is also displayed.These results obtained here will be significantly beneficial for the applications where a collision model is requested in the simulations of relevant grain flows and impact dynamics etc..

Theoretical Model of Transformation Superlastic Diffusion Bonding for Eutectoid Steel

Based on current theories of diffusion and creep cavity closure at high temperature, a theoretical analysis of phase transformation diffusion bonding for T8/T8 eutectoid steel is carried out. The diffusion bonding is mainly described as two-stage process: Ⅰ The interfacial cavity with shape change from diamond to cylinder.Ⅱ The radius of the cylindrical cavity are reduced and eliminated gradually. A new theoretical model is established for the process of transformation superplastic diffusion bonding (TSDB) on the basis of a theoretical model for isothermal superplastic diffusion. The model can predict the bonding quality which is affected by technological parameters, such as limit cycling temperature, the compressive stress, the numbers of thermal cycles and temperature cycling through the phase transformation in the thermal cycling and so on. Results show that the maximum temperature, the compressive stress, the numbers of thermal cycles and the rate of temperature changing speed in the thermal cycling have an important influence on TSDB process. Meanwhile, reasonable technological parameters chosen from theoretical analysis is in good agreement with those obtained from experimental results.

Establishment and Validation for the Theoretical Model of the Vehicle Airbag

The current design and optimization of the occupant restraint system（ORS） are based on numerous actual tests and mathematic simulations. These two methods are overly time-consuming and complex for the concept design phase of the ORS, though they＇re quite effective and accurate. Therefore, a fast and directive method of the design and optimization is needed in the concept design phase of the ORS. Since the airbag system is a crucial part of the ORS, in this paper, a theoretical model for the vehicle airbag is established in order to clarify the interaction between occupants and airbags, and further a fast design and optimization method of airbags in the concept design phase is made based on the proposed theoretical model. First, the theoretical expression of the simplified mechanical relationship between the airbag＇s design parameters and the occupant response is developed based on classical mechanics, then the momentum theorem and the ideal gas state equation are adopted to illustrate the relationship between airbag＇s design parameters and occupant response. By using MATLAB software, the iterative algorithm method and discrete variables are applied to the solution of the proposed theoretical model with a random input in a certain scope. And validations by MADYMO software prove the validity and accuracy of this theoretical model in two principal design parameters, the inflated gas mass and vent diameter, within a regular range. This research contributes to a deeper comprehension of the relation between occupants and airbags, further a fast design and optimization method for airbags＇ principal parameters in the concept design phase, and provides the range of the airbag＇s initial design parameters for the subsequent CAE simulations and actual tests.

A THEORETICAL MODEL OF MAGNETOELASTIC BUCKLING FOR SOFT FERROMAGNETIC THIN PLATES

As an essential model of magnetoelastic interaction between magnetic field and mechanical deformation, the study on magnetoelastic buckling phenomenon of soft ferromagnetic plates in a magnetic environment has been conducted. One of the key steps for the theoretical prediction of the critical magnetic field is how to formulate magnetic force exerted on the magnetized medium. Till today, the theoretical predictions, from theoretical models in publications, of the magnetoelastic buckling of ferromagnetic cantilevered beam-plate in transverse magnetic field are all higher than their experimental data. Sometimes, the discrepancy between them is as high as 100%. In this paper, the macroscope formulation of the magnetic forces is strictly obtained from the microscope Amperion current model. After that, a new theoretical model is established to describe the magnetoelastic buckling phenomenon of ferromagnetic thin plates with geometrically nonlinear deformation in a nonuniform transverse magnetic field. The numerical method for quantitative analysis is employed by combining the finite elemental method for magnetic fields and the finite difference method for deformation of plates. The numerical results obtained from this new theoretical model show that the theoretical predictions of critical values of the buckling magnetic field for the ferromagnetic cantilevered beam-plate are in excellent agreement with their experimental data. By the way, the region of applicability to the Moon-Pao's model, or the couple model, is checked by quantitative results.

Theoretical modeling of the effects of temperature and moisture content on the acoustic velocity of Pinus resinosa wood

To investigate the effects of temperature and moisture content(MC) on acoustic wave velocity(AWV)in wood,the relationships between wood temperature,MC,and AWV were theoretically analyzed.According to the theoretical propagation characteristics of the acoustic waves in the wood mixture and the differences in velocity among various media(including ice,water,pure wood or oven-dried wood),theoretical relationships of temperature,MC,and AWV were established,assuming that the samples in question were composed of a simple mixture of wood and water or of wood and ice.Using the theoretical model,the phase transition of AWV in green wood near the freezing point(as derived from previous experimental results) was plausibly described.By comparative analysis between theoretical and experimental models for American red pine(Pinus resinosa) samples,it was established that the theoretically predicted AWV values matched the experiment results when the temperature of the wood was below the freezing point of water,with an averageprediction error of 1.66%.The theoretically predicted AWV increased quickly in green wood as temperature decreased and changed suddenly near 0 °C,consistent with the experimental observations.The prediction error of the model was relatively large when the temperature of the wood was above the freezing point,probably due to an overestimation of the effect of the liquid water content on the acoustic velocity and the limited variables of the model.The high correlation between the predicted and measured acoustic velocity values in frozen wood samples revealed the mechanisms of temperature,MC,and water status and how these affected the wood(particularly its acoustic velocity below freezing point of water).This result also verified the reliability of a previous experimental model used to adjust for the effect of temperature during field testing of trees.

Theoretical models for designing a 220-GHz folded waveguide backward wave oscillator

In this paper, the basic equations of beam-wave interaction for designing the 220 GHz folded waveguide （FW） backward wave oscillator （BWO） are described. On the whole, these equations are mainly classified into small signal model （SSM）, large signal model （LSM）, and simplified small signal model （SSSM）. Using these linear and nonlinear one-dimensional （1D） models, the oscillation characteristics of the FW BWO of a given configuration of slow wave struc- ture （SWS） can be calculated by numerical iteration algorithm, which is more time efficient than three-dimensional （3D） particle-in-cell （PIC） simulation. The SSSM expressed by analytical formulas is innovatively derived for determining the initial values of the FW SWS conveniently. The dispersion characteristics of the FW are obtained by equivalent circuit analysis. The space charge effect, the end reflection effect, the lossy wall effect, and the relativistic effect are all considered in our models to offer more accurate results. The design process of the FW BWO tube with output power of watt scale in a frequency range between 215 GHz and 225 GHz based on these 1D models is demonstrated. The 3D PIC method is adopted to verify the theoretical design results, which shows that they are in good agreement with each other.

How Unique is ′China Model′: A Review of Theoretical Perspectives on China′s Urbanization in Anglophone Literature

As a major aspect of the ′China Model′, urbanization in China is being heatedly discussed in the Anglophone literature in the last two decades. By considering China′s urbanization as a ′testing ground′ of ′western′ theories, these studies are important for the understanding of China′s ongoing urban restructuring and exchanging knowledge with ′western′ insights. Based on a survey of existing studies, this paper identifies various endogenous and exogenous concepts and explanations of China′s urbanization. It is suggested that China′s urbanization is mainly driven by a combination of political decentralization and neoliberalization with various forms of social stratification and mobility. However, it is argued that the distinctness of the ′China Model′, which is usually used to support the legitimacy of studies of China′s urbanization, has led to many controversial arguments and diminished the due contributions of Chinese scholars in the knowledge production of China′s urbanization. To consolidate the legitimacy of studies on China′s urbanization and enhance the roles of Chinese scholars, we suggest future studies to pay more attentions to the fundamental theories with looser constraints and ′true questions′ on China′s urbanization.

A Theoretical Model for the Asymmetric Transmission of Powerful Acoustic Wave in Double-Layer Liquids

A theoretical model which couples the oscillation of cavitation bubbles with the equation of an acoustic wave is utilized to describe the sound fields in double-layer liquids, which can be used to realize the asymmetric transmission of acoustic waves. Numerical simulations show that the asymmetry is related to the properties of the host liquids and the input acoustic wave. Asymmetry can be enhanced if the maximum number density or the ambient radius of the cavitation bubbles in the low cavitation threshold liquid increases. Moreover, the direction of rectification will be reversed if the amplitude of the input acoustic wave becomes high enough.

Progress in Mechanical Modeling of Implantable Flexible Neural Probes

Implanted neural probes can detect weak discharges of neurons in the brain by piercing soft brain tissue,thus as important tools for brain science research,as well as diagnosis and treatment of brain diseases.However,the rigid neural probes,such as Utah arrays,Michigan probes,and metal microfilament electrodes,are mechanically unmatched with brain tissue and are prone to rejection and glial scarring after implantation,which leads to a significant degradation in the signal quality with the implantation time.In recent years,flexible neural electrodes are rapidly developed with less damage to biological tissues,excellent biocompatibility,and mechanical compliance to alleviate scarring.Among them,the mechanical modeling is important for the optimization of the structure and the implantation process.In this review,the theoretical calculation of the flexible neural probes is firstly summarized with the processes of buckling,insertion,and relative interaction with soft brain tissue for flexible probes from outside to inside.Then,the corresponding mechanical simulation methods are organized considering multiple impact factors to realize minimally invasive implantation.Finally,the technical difficulties and future trends of mechanical modeling are discussed for the next-generation flexible neural probes,which is critical to realize low-invasiveness and long-term coexistence in vivo.

Research on the quasi-isentropic driving model of aluminized explosives in the detonation wave propagation direction

Taking CL-20(Hexanitrohexaazaisowurtzitane)-based aluminized explosives with high gurney energy as the research object, this research experimentally investigates the work capability of different aluminized explosive formulations when driving metal flyer plates in the denotation wave propagation direction.The research results showed that the formulations with 43 μm aluminum(Al) powder particles(The particle sizes of Al powder were in the range of 2~43 μm) exhibited the optimal performance in driving flyer plates along the denotation wave propagation direction. Compared to the formulations with Al powder 13 μm, the formulations with Al powder 2 μm delivered better performance in accelerating metal flyer plates in the early stage, which, however, turned to be poor in the later stage. The CL-20-based explosives containing 25% Al far under-performed those containing 15% Al. Based on the proposed quasi-isentropic hypothesis, relevant isentropy theories, and the functional relationship between detonation parameters and entropy as well as Al reaction degree, the characteristic lines of aluminized explosives in accelerating flyer plates were theoretically studied, a quasi-isentropic theoretical model for the aluminized explosive driving the flyer plate was built and the calculation methods for the variations of flyer plate velocity, Al reaction degree, and detonation product parameters with time and axial positions were developed. The theoretical model built is verified by the experimental results of the CL-20-based aluminized explosive driving flyer plate. It was found that the model built could accurately calculate the variations of flyer plate velocity and Al reaction degree over time. In addition, how physical parameters including detonation product pressure and temperature varied with time and axial positions was identified. The action time of the positive pressure after the detonation of aluminized explosives was found prolonged and the downtrend of the temperature was slowed down and even reversed to a slight rise due to the aftereffect reaction between the Al powder and the detonation products.

A Proposed Theoretical Model for Exploring the Ecological Ideologies Revealed in the Online Chinese Resort Profiles

Responding to the increasingly heated discussion of environmental issues and the mounting concern about ecological degradation, the present thesis is to try formulating a comprehensive and specific theoretical model for exploring the ecological ide-ologies revealed in the online Chinese resort profiles. In this model, Fairclough's three-dimensional model draws upon the Subsystem of Appraisal Theory-Attitude as the specific analytical framework and the ecological philosophy in the scope of ecocriticism as the specific explanatory tool for the exploration of ecological ideologies in these texts. Thus, the present thesis finds a point where CDA, Appraisal Theory and Ecocriticism work together to conduct a discourse analysis, which not only broadens the theoretical scope of each, but makes these theories better serve the practical course of environment protection.

Two Degree-of-Freedom Dynamic Theoretical Model on Tile Thermal Protection System

In order to study the dynamic behaviors of the thermal protection system(TPS)and dynamic strength of the strain-isolation-pad(SIP),a two degree-of-freedom dynamic theoretical model is presented under the acoustic excitation and base excitation. The tile and SIP are both considered as the elastic body and simplified as a mass point,a linear spring and a damping element. The theoretical solutions are derived,and the reasonability of theoretical model is verified by comparing the theoretical results with the numerical results. Finally,the influences on the dynamic responses of TPS by the structural damping coefficient of TPS,elasticity modulus and thickness of SIP are analyzed.The results show that the material with higher damping,and SIP with thicker size and lower elastic modulus should be considered to reduce the dynamic responses and intensify the security of TPS. The researches provide a theoretical reference for studying the dynamic behaviors of TPS and the dynamic strength of SIP. Besides,the dynamic theoretical model can be used as a quick analysis tool for analyzing the dynamic responses of TPS during the initial design phase.

Xinhe Mine water inrush risk assessment based on quantification theoretical models

Taking the Xinhe mine's structure, mine pressure, structural fissure, fault andfault displacement, the distance between fault and water inrush point, thickness of block,water pressure those geological factors which influenced the water inrush as the independentvariable, based on these data of water inrush point and water uninrush point, usingthe method of quantification theory(Ⅰ,Ⅱ), it would quantitatively disposes the qualitativevariable, applied to calculation to evaluate the risk of Xinhe's water inrush.

A theoretical model for assessing the sustainability of ecosystem services

The Value of the World's Ecosystem Services and Natural Capital by Costanza in 1997 is generally re-garded as a monument for the research of valuing ecosystem services. However, the classif ication of ecosystem ser-vices, the method of various services summation and the purpose for static global value had be confronted by many criticisms. Based on the summary of these criticisms, suggestions, related function assessment and further study direction, the sustainability of ecosystem services is presented. The two basic indicators in ecology, productivity and biodiversity, respectively charactering the ability of producing and self-organizing, not only represent the internal function of ecosystem, but also are proportioned to its external function of supporting and providing for human life. On presenting the general form of ecosystem services assessment, this paper improves the mathematical formula by giving a function adjusting coeff icient composed of productivity and biodiversity. Theoretically, the integration of the two indicators reflects the changes of ecosystem services at spatial and temporal scales, can physically assess the sustainability of ecosystem services, and build a f irm scientif ic fundament of value assessment for ecosystem services. Objectively, its application should be strictly tested in next step.

A Theoretical Model of Energy Transfer between Rare Earth Ions in Crystals

The limitation of the random walk theory of energy transfer between rare earth ions in crystals published in literatures is pointed out in this paper. A modified model, which can be used in any level of rare earth ion concentration when the interaction between donor and acceptor is different from that between donors, is introduced. measured fluorescence lifetimes of Yb^3＋：YAl3（BO3）4 This model has been applied to analyze the with a series of Yb^3＋ concentrations.

Vector modeling of robotic helical milling hole movement and theoretical analysis on roughness of hole surface

To avoid the machine problems of excessive axial force, complex process flow and frequent tool changing during robotic drilling holes, a new hole-making technology (i.e., helical milling hole) was introduced for designing a new robotic helical milling hole system, which could further improve robotic hole-making ability in airplane digital assembly. After analysis on the characteristics of helical milling hole, advantages and limitations of two typical robotic helical milling hole systems were summarized. Then, vector model of helical milling hole movement was built on vector analysis method. Finally, surface roughness calculation formula was deduced according to the movement principle of helical milling hole, then the influence of main technological parameters on surface roughness was analyzed. Analysis shows that theoretical surface roughness of hole becomes poor with the increase of tool speed ratio and revolution radius. Meanwhile, the roughness decreases according to the increase of tool teeth number. The research contributes greatly to the construction of roughness prediction model in helical milling hole.

A Theoretical Model of Arc Light Radiation Based on GTA Spectral Diagnosis

An arc light radiation phenomenon in TIG welding process was studied through experiments and theoretical analysis.The arc spectra were acquired under a variety of welding parameters from 200 nm to 1000 nm wavelength rangein TIG. The influence of welding parameters on the arc radiation was discussed. The radiation energy from linesemission mechanisms was calculated and the comparison was made with the one from the continuum emissionmechanisms. The result shows that the radiation energy from the line emission mechanisms is equal to the one fromthe background. Based on the experiments and analysis, a physical model of arc light radiation has been developed.In this model. the arc plasma was presumed to be in local thermal equilibrium (LTE) with light thinness property.The Bolzmann distribution and Saha equation were applied to establish the arc light radiation model. This helps laythe foundation for further mathematical modeling of the arc light radiation.

Predicting menopausal health in a diverse population group through a theoretical linear model——Theoretical model to predict menopausal health

With the increase in longevity and demographic shift, menopause is emerging as one of the major health issues affecting middle aged women in developing countries. In this study our aim was to define & develop useful predictive indicators to assess menopausal health status in women with diverse socio-economic & cultural backgrounds. The model was developed using the data drawn from known published works as well as our own epidemiological & clinical case records. A linear equation was derived and expected results were obtained and analysed. The outcome was measured in terms of menopausal health & wellbeing index. Wide cultural diversity, unequal socio-economic status and gender inequality are some of the sensitive multi factorial determinants that influence the menopausal health. Education and availability of optimal quality health care facilities positively influenced level of awareness and improved the health seeking behavior & health literacy. The menopausal health & wellbeing index can be used as a predictive tool to develop interventional management modalities to improve quality of life.