Evaluation of umami taste components of mushroom (Suillus granulatus) of different grades prepared by different drying methods

Suillus granulatus is a valuable wild edible mushroom with a strong umami taste.Different grades of S.granulatus were dried by different methods,including natural air drying(ND),hot air drying(HAD),vacuum drying(VD),and freeze drying(FD).Results showed that VD samples of all grades had the highest equivalent umami concentration(EUC)value(P<0.05).The second grade of ND samples showed the highest EUC value(P<0.05).The first grade of HAD samples showed the highest EUC value(P<0.05).The third grade of FD samples showed the highest EUC value(P<0.05).The third grade of VD samples had a higher EUC value than the other grades of samples dried by VD.Electronic tongue results indicated no significant differences between samples of all grades dried by all methods.Thus,umami taste components are affected by drying method and grade.VD is an appropriate drying method for all sample grades.ND,HAD,and FD are suitable for second-,first-,and third-grade samples,respectively.

Effect of drying methods on the discoloration of three major domestic softwood species in Korea

Japanese pine, Korean pine and larch are three major softwood species in Korea. Their colors are relatively light, thus easily discolored due to drying and UV irradiation. In this study, they were dried with five different drying methods, steam treated and exposed to weathering. Their colors were measured using a spectrophotometer and comparisons made both among species and drying methods. For Japanese and Korean pines, high temperature dried and steam-dried specimens showed distinct color differences compared with the controls. Steam treatment discolored the dried specimens of Japanese and Korean pines but did not discolor those of larch. After weathering for 144 days the specimens of Japanese pine showed slight color differences among drying methods.

Effects of Different Drying Methods on the Functional and Structural Properties of Dietary Fiber from Peanut Shell

[Objectives] This study was conducted to investigate the drying methods,functional and structure properties of dietary fiber( DF) from peanut shells.[Methods]Peanut shells were used as a raw material to prepare peanut shell dietary fiber( DF) by hot air drying( HA) and vacuum freeze drying( VF),respectively,and their functional and structural characteristics were compared in detail. [Results]The solubility,water holding capacity,oil holding capacity and swelling capacity of HA-DF and VF-DF were 2. 15 %,7. 63 g/g,7. 73 g/g,10. 35 ml/g and 3. 85 %,14. 98 g/g,15. 25 g/g,15. 85 ml/g,respectively. The total phenol contents were 2. 623 and 5. 173 mg GAE/g,respectively. The IC(50) values of ·OH,O2^-· and DPPH free radicals were 4. 16 and 4. 09 mg/ml,7. 90 and 3. 32 mg/ml,and 3. 19 and 3. 09 mg/ml,respectively. The molecular weight of VF-DF was smaller,and it had narrow molecular weight distribution and denser particles. Electron microscopy showed that VF-DF had a porous network like honeycomb and swelled structure. [Conclusions]This study can provide a theoretical basis for the functional modification and comprehensive utilization of peanut shell dietary fiber.

Simulation of Wetting and Drying Processes in A Depth Integrated Shallow Water Flow Model by Slot Method

A particular porosity method named ＂slot method＂ is implemented in a depth-integrated shallow water flow model （DIVAST） to simulate wetting and drying processes. Discussed is the relationship between the shape factors of the ＂slot＂ and the preset depth used in ＂wetting-drying＂ algorithm. Two typical tests are conducted to examine the performance of the method with the effect of the shape factors of the ＂slot＂ being checked in detail in the first test. Numerical results demonstrate that： 1 ） no additional effort to improve the finite difference scheme is needed to implement ＂slot method＂ in DIVAST, and 2） ＂slot method＂ will simulate wetting and diying processes correctly if the shape factors of the ＂slot＂ being selected properly.

Preparation and Characterization of Porous Spherical LiFePO_4/C by Spray Drying and Carbothermal Method

The porous spherical LiFePO4/C powders were prepared by spray drying and carbothermal method （SDCTM）. Cheaper trivalent iron ion was used as the precursor. The pure olivine phase can be prepared with the spray drying and subsequent heat-treatment. The average particle size is around 10μm, and the value of porosity is 63.04%. The results indicate that the initial discharge capacity decreases with increasing charge/ discharge rate and reduces from 138.8 mAh · g^-1 at C/20 rate to 98.3 mAh ·g^-1 at 2C rate, while the polarization between the charge and discharge plateaux is enlarged from 53 mv to 347 mv. However, the average discharge efficiency is up to 99.5% at 2C rate compared to 80.6% at C/20 rate from the second cycle.

Effect of variety and drying method on the nutritive value of corn for growing pigs

Background：This experiment was conducted to determine the nutritive value of corn from the north of China for growing pigs.The experiment examined corn variety（LS1,LS2,LS3 and LS4）grown in one location,drying method（sun dried and artificially dried）and different drying temperatures.Corn harvested at 20-25%moisture was dried to about 12%moisture by sun drying and artificially drying at 80,100,or 120℃ in a fluidized bed dryer.Ninety-six barrows（average BW of 33.4 ± 2.7 kg）were housed in individual metabolism crates to facilitate separate collection of feces and urine.A five-day collection period followed a seven-day diet acclimation period.Results：The results indicated that variety significantly influenced（P〈0.01）the 1,000 kernel weight of corn but not the bulk weight.Variety also influenced the available energy content（digestible energy of dry matter,P〈0.01;metabolisable energy of dry matter,P〈0.01）and digestibility of organic matter（P〈0.01）,as well as dry matter（P〈0.01）and gross energy（GE）content（P〈0.02）.The drying method of corn significantly influenced the 1,000 kernel weight（P〈0.01）,bulk weight（P〈0.01）and digestibility of ether extract（EE）（P〈0.01）.No effect of drying temperature on the digestibility of organic matter,dry matter（DM）,crude protein（CP）,neutral detergent fiber（NDF）,acid detergent fiber（ADF）and gross energy was observed,but gelatinization（P〈0.05）and test weight（P〈0.01）decreased with an increase in temperature.Conclusions：Variety has a significant impact on the nutritive value of corn for growing pigs,and greater attention needs to be paid to these influences in the assignment of the nutritive value of corn given to growing pigs.

Immersed Interface Method for Fokker-Planck Equation with Discontinuous Drift

The Immersed Interface Method (IIM) is derived to solve the corresponding Fokker-Planck equation of Brownian motion with pure dry friction, which is one of the simplest models of piecewise-smooth stochastic systems. The IIM is capable of treating a discontinuity in the drift of Fokker-Planck equation and it is readily extended to the dry and viscous friction model. Analytic results of the considered model are used to confirm the effectiveness and design accuracy of the scheme.

Optimization of Freeze-drying Protective Agents for Lactobacillus plantarum KLDS1.0391 by Response Surface Methodology

In this study, the Single Factor Test（SFT） was used to optimize the pre-freezing conditions of L. plantarum KLDS1.0391（KLDS1.0391）. Further, the Freeze-Drying Protective Agents（FDPA） of KLDS1.0391 was optimized by Response Surface Methodology（RSM）. The optimum pretreatment conditions were as the follows： initial concentration of KLDS1.0391 was 1011 CFU · m L-1 and KLDS1.0391 was pre-freezed at –80℃ for 8 h to achieve the survival rate of 46.21%. The main components of FDPA were skim milk, sucrose, sodium glutamate and Tween-80. And the influence of four factors on the survival rate of KLDS1.0391 in freeze-drying was in order as the follows： skim milk〉sucrose〉Tween-80〉sodium glutamate. The optimal FDPA composition was skim milk 11.3%, sucrose 9.8%, sodium glutamate 5.1% and Tween-80 0.2%. Under the above conditions, the survival rate of the cells was 82.98%. Comparing the predicted values, the relative error was 0.37% and the difference was not significant, which indicated that the established model could effectively reflect the actual protection of FDPA to KLDS1.0391.

Effects of Different Drying Methods on Physiological Activities of Kiwifruit

[Objectives] This paper was to clarify the effects of different drying methods on the physiological activities of kiwifruit,so as to provide theoretical bases for the drying processing of kiwifruit.[Methods]With kiwifruit as the research object,the effects of hot air drying,microwave drying,and vacuum freeze drying on the active ingredients in dried kiwifruit were studied,and antioxidant activity of the ingredients were determined through the scavenging capacity of 1,1-phenyl-2-picrylhydrazyl free radicals( DPPH),hydroxyl radical scavenging capacity and the antioxidant capacity of ferrous ions.[Results] Vacuum freeze drying greatly reduced the physiological activities of kiwifruit,followed by microwave drying.Hot air drying was the best choice for dehydration of kiwifruit.Under the same conditions,the total flavonoid content of kiwifruit from hot air drying was 70.12 mg/ml,and the DPPH· free radicals scavenging ability of the treatment solution was the strongest,with the scavenging rate reaching 9.42%.The OH radicals scavenging rate was the highest at the concentration of 0.015 mg/ml,reaching69.92%.The absorbance reached the maximum at the concentration of 0.025 mg/ml,and the ferrous ion reduction capacity was also the greatest with the absorbance of 2.542.[Conclusions] Hot air drying could well maintain the shape and nutrients of kiwifruit,making it a proper drying method for kiwifruit processing.

Preparation of Microcapsules Containing Grape Polyphenol with the Spray Drying Method Followed by the Layer-by-Layer Method

It was tried to prepare the microcapsules containing grape polyphenol with the spray drying method followed by the layer-by-layer method. As grape polyphenol was water soluble, the spray drying method was adopted to obtain the higher content. As the shell material of the first microcapsules prepared by the spray drying method, palmitic acid with the melting point of 60&degC was adopted in order to prevent grape polyphenol from dissolution into water. As the shell material of the second microcapsules prepared by the layer-by-layer method, chitosan was used to coat the first microcapsules and to give the microcapsules alcohol resistance. In the experiment, the spray drying conditions such as the inlet temperature and the spraying pressure, the oil soluble surfactant species and the chitosan concentration were changed. The mean diameters of microcapsules could be controlled in the range from 5 μm to 35 μm by changing the spraying pressure and the inlet temperature. The yield of microcapsules and the microencapsulation efficiency over 50% could be obtained under the conditions of P = 1.0 kgf/cm2 and Tin = 100&degC. Furthermore, the microencapsulation efficiency could be increased by adding the oil soluble surfactant with the larger HLB value. Coating with chitosan could considerably increase alcohol resistance.

Preparation of Temperature and Water Responsive Microcapsules Containing Hydroquinone with Spray Drying Method

It was tried to prepare temperature and water responsive microcapsules containing hydroquinone as a water soluble core material with the spray drying method. Microcapsules were composed of ethyl cellulose (EC), methyl cellulose (MC) and P-N-isopropylacrylamid (PNIPAM). P-N-isopropylacrylamid and methyl cellulose were used as a temperature responsive polymer and as a water responsive polymer, respectively. Ethyl cellulose was the main shell material of microcapsule. At the microencapsulation process, the core and shell materials were dissolved in ethyl alcohol dissolving water (20 wt%) and then, spray-dried to prepare microcapsules. In the fundamental operation, the concentration and molecular weight of methyl cellulose were mainly changed. The releasing rate of hydroquinone was repressed at 40°C and increased at 20°C due to temperature responsive PNIPAM. Furthermore, responsibility to water was increased with the concentration of methyl cellulose.

Effects of Modulation Methods on the Drying Characteristics and Nutritional Quality of Medicago sativa Hay

Two-year-old Medicago sativa at budding initial stage was taken as research materials.Five methods were used to make green hay,including flatting stems ＋ spraying 2.5% K2CO3,flatting stems,sun curing,drying in shade and drying under 105 ℃ condition（CK）.Besides,effects of different green hay making methods on dry characteristics and nutritional quality of M.sativa green hay were studied,and a comprehensive evaluation of M.sativa green hays was conducted.Results showed that,except CK,the drying rates in other making methods were all fast at first,and then slow down.Both of drying under 105 ℃ condition and flatting stems ＋ spraying K2CO3 could speed up drying rate and reduce nutritional losses of green hay.Sun curing could also speed up drying rate,but it could not maintain the quality of green hay.The results of Grey Relational Analysis on five green hay making methods indicated that CK had the best comprehensive performance,followed by green hays made by flatting stems ＋ spraying K2CO3.Therefore,flatting stems ＋ spraying K2CO3 was a quick and easy method to make green hay,and it was worth to be recommended in practical production.

Effects of Different Drying Methods on the Quality of Micronized Chinese Wolfberry Powder

[Objectives] To study the effects of different drying methods on quality of Chinese wolfberry powder. [Methods] The physical properties and nutritional contents of Chinese wolfberry powder prepared by hot air drying,vacuum freeze drying,microwave vacuum drying,drum drying and spray drying were measured and analyzed to explore the effects of different drying methods on quality characteristics of Chinese wolfberry powder. [Results] The total sugar content and reducing sugar contents of product: vacuum freeze drying > spray drying > microwave vacuum drying > drum drying > hot air drying; carotene and total flavonoid contents: vacuum freeze drying > microwave vacuum drying > spray drying > drum drying > hot air drying; after drying process,the dietary fiber content of product obtained by drum drying and spray drying was relatively higher,while the Vc content of Chinese wolfberry powder prepared by vacuum freeze drying was the highest. a~*value( redness to greenness) of color: vacuum freeze drying > microwave vacuum drying > spray drying > drum drying > hot air drying; the Chinese wolfberry powder prepared by vacuum freeze drying had the best solubility,hygroscopicity and rehydration ratio. [Conclusions] Microwave vacuum drying was the best method to prepare Chinese wolfberry powder,in order to keep its quality and consider the cost of production.

Insight into the effect of gel drying temperature on the structure and desulfurization performance of ZnO/SiO_(2)adsorbents

A series of ZnO/SiO_(2) adsorbents were prepared by a sol-gel method using tetraethyl orthosilicate,ethylene glycol(EG)and nitrates as precursors.The effect of gel drying temperature on the structure and desulfurization performance of the adsorbents were investigated in detail.It is found that the low drying temperature led to a weak interaction among EG,Si AOH/H_(2)O and the nitrates in the gel system,which caused the oxidation of EG by NO3-and formed zinc glyoxylate complex during the gel calcination process,whereas this oxidation process also occurred at a high drying temperature during the gel drying process.The formed zinc glyoxylate complex promoted the generation of monodentate carbonate on the surface of Zn O,which resulted in the inferior desulfurization performance of adsorbents despite they have smaller Zn O nanoparticles.The gel dried at 120°C formed the hydrogen bonds between EG and Si AOH/H_(2)O and a strong interaction between zinc oxo-clusters and NO3-was also found in the gel system,which avoided the oxidation of EG by NO3-during the preparation process and the Zn O nanoparticles with sizes of 6 nm were formed by a combustion method.The adsorbent affords a highest sulfur capacity of 104.9 mg·g^(-1) in this case.In addition,the gel drying temperature has a significant influence on the textural properties of the adsorbents except their surface area.

Research and Application of Log Defect Detection and Visualization System Based on Dry Coupling Ultrasonic Method

In order to optimize the wood internal quality detection and evaluation system and improve the comprehensive utilization rate of wood,this paper invented a set of log internal defect detection and visualization system by using the ultrasonic dry coupling agent method.The detection and visualization analysis of internal log defects were realized through log specimen test.The main conclusions show that the accuracy,reliability and practicability of the system for detecting the internal defects of log specimens have been effectively verified.The system can make the edge of the detected image smooth by interpolation algorithm,and the edge detection algorithm can be used to detect and reflect the location of internal defects of logs accurately.The content mentioned above has good application value for meeting the requirement of increasing demand for wood resources and improving the automation level of wood nondestructive testing instruments.

Effects of Different Initial Processing Methods on Atractylodin Content of Atractylodes chinensis

[Objectives]The paper was to compare the effects of different initial processing methods on atractylodin content of Atractylodes chinensis.[Methods]The atractylodin content of A.chinensis obtained by different initial processing methods was determined by HPLC.The loss rate on drying was determined by weighing.[Results]In the study of drying methods,the atractylodin content varied significantly among different thicknesses of slices,and the overall content of the product with the slice thickness of 5 mm was higher.Among different drying methods,constant temperature vacuum drying and shade drying of 5 mm slice resulted in the highest content of atractylodin.In the experiment of root impacting,root impacting twice received the best effect,and there was no significant difference in the atractylosin content of A.chinensis between drying in the sun and drying in the shade after root impacting twice(P>0.05).[Conclusions]Constant temperature vacuum drying or drying in the shade with the slice thickness of 5 mm,and root impacting twice is the best initial processing method,which leads to high atractylodin content of A.chinensis and good quality of medicinal materials.

Optimization of Process Parameters of Continuous Microwave Drying Raspberry Puree Based on RSM and ANN-GA

To improve drying uniformity and anthocyanin content of the raspberry puree dried in a continuous microwave dryer,the effects of process parameters(microwave intensity,air velocity,and drying time)on evaluation indexes(average temperature,average moisture content,average retention rate of the total anthocyanin content,temperature contrast value,and moisture dispersion value)were investigated via the response surface method(RSM)and the artificial neural network(ANN)with genetic algorithm(GA).The results showed that the microwave intensity and drying time dominated the changes of evaluation indexes.Overall,the ANN model was superior to the RSM model with better estimation ability,and higher drying uniformity and anthocyanin retention rate were achieved for the ANN-GA model compared with RSM.The optimal parameters were microwave intensity of 5.53 W•g^(-1),air velocity of 1.22 m·s^(-1),and drying time of 5.85 min.This study might provide guidance for process optimization of microwave drying berry fruits.

柳杉苗木综合营养诊断I.田间DRIS图解法

应用N、P、K三元二次旋转回归法,根据1年生柳杉苗木现实生物量的差异,划分2种不同的产量类型,以高产量类型作为最适值,结合DR IS诊断图的绘制和应用,研究氮、磷、钾肥不同施肥配比条件下苗木体内氮、磷、钾的养分含量及其需求程度,对柳杉苗期进行营养诊断分析.结果表明:柳杉苗期叶片3元素浓度最佳比值范围为:N/P=9.439 8±1.345 7,N/K=3.263 9±0.178 7,P/K=0.359 2±0.045 6.以三元二次旋转回归法设计的各处理苗木为例,列出各元素的DR IS诊断相对需肥次序,证实了营养诊断的准确性.

闽南尾巨桉人工林叶片营养的DRIS诊断

利用DRIS营养诊断法对闽南尾巨桉人工林叶片的营养平衡状态进行了分析,结果表明:闽南尾巨桉人工林叶片PN含量最适比值为0.0975-0.1313,NK含量最适比值为0.7742-1.1736,PK含量最适比值为0.0901-0.1247.闽南尾巨桉人工林的营养平衡状态较差,N需求量最大,P需求量次之,K的需求量最小.

猕猴桃矿质元素DRIS标准研究

本实验采集了34个猕猴桃园叶样,并根据产量将亩产≥1000kg的17个园子划为高产组,亩产<1000kg的17个园划分低产组。对叶片中N、P、K、Mn、Cu、Zn6种元素含量进行测定和统计分析。结果表明:低产组大量元素需肥强度最大的主要为N,占该组的52.94%,微量元素需肥强度最大的以Zn和Cu为多,分别占该组的47.06%、41.18%;制定出猕猴桃园N、P、K、Mn、Cu、Zn的DRIS指数分级标准,其适宜指数范围分别为-4.003～5.202,4.002～4.922,4.993～6.465,9.733～7.675,1.621～1.332,5.317～3.998;各园的需肥顺序用图示法和用指数法判断,其结果一致。