Cavitation Bubble Luminescence in Cone-Type Throttle Valve

In light of the light emission from cavitation bubbles under certain conditions, the phenomena of the cavitation bubble luminescence in the hydraulic cone-type throttle valve is focused in this paper. Firstly,the software of automatic dynamic incremental nonlinear analysis( ADINA) is applied to studying the flow field of the flow channel of the cone-type throttle valve. And the pressure distribution of the valve flow channel is obtained. The easyhappening area of cavitation in the cone-type throttle valve is also found out by ADINA. Then,the experimental research on the conetype throttle valve is carried out in this paper. The changing law of the hydraulic oil temperature in the corresponding region under different system pressure and the backpressure condition are experimentally researched. The relationship between the luminescence intensity and the cavitation intensity,the pressure,and the temperature are also studied. Finally,a summary of the causal relationship between the luminescence and cavitation in the cone-type throttle valve,the cavitation effect on the hydraulic oil temperature,and the method for the inhibition of cavitation bubble luminescence are presented. The results show that the light intensity increases with the increase of the cavitation intensity,and the luminescence can be inhibited by the increase of backpressure.

Experimental Analysis of the Influence of Exhaust Thermal Management on Engine NO_(x) Emission

Exhaust thermal management is essential to allow engines to meet the Euro VI emissions standards and reducing nitrogen oxide emissions is one of the most important targets being pursued nowadays.Along these lines,in the present study,engine’s thermal performances have been evaluated on the basis of a WHTC test,namely a transient engine dynamometer schedule defined by the global technical regulation(GTR)developed by the UN ECE GRPE group(the GTR is covering a world-wide harmonized heavy-duty certification(WHDC)procedure for engine exhaust emissions).The influence of thermal management on fuel consumption,intake,and tailpipe NO_(x) have been quantitatively analyzed for the overrun state.The results have shown that there can be a strong influence on the after-treatment temperatures and tailpipe NO_(x).In particular,the average temperature upstream of the diesel oxidation catalyst(DOC)has been found to increase from 245°C to 254°C,the average temperature of the selective catalytic reduction(SCR)to increase from 248°C to 253°C,the SCR’s minimum temperature to increase from 196°C to 204°C,and the peak value of the NO_(x) emissions in the low-temperature region to decrease from 73 to 51 mg/s.However,the influence of the overrun state’s thermal management strategy on the fuel consumption,the air intake,the ammonia storage,the NO_(2)/NO_(x) ratio,and the urea consumption has been observed to be relatively limited.