Thrusting of the North Lhasa Block in the Tibetan Plateau

A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.

Thrusting and Exhumation Processes of a Bounding Mountain Belt: Constraints from Sediment Provenance Analysis of the Hefei Basin

Lithic (or gravel) composition analyses of the Jurassic Sanjianpu Formation and Fenghuangtai Formation in the Hefei basin show that the sediment provenance consists mainly of four kinds of rock units: the basement metamorphic complex, granitic rocks, medium- and low-grade metamorphic rocks, and sandy and muddy sedimentary rocks, which are distributed along the bounding thrust belt. The whole stratigraphic section can be divided into 2 lithic sequences and 7 subsequences. The regular distribution and changes of lithic fragments and gravels in lithic (or gravel) sequences reflect that the bounding thrust belt of basin has undergone 2 thrusting cycles and 7 thrusting events. Lithic (or gravel) composition analyses of the basin fully reveal that the northern Dabie basement metamorphic complex was exhumed on the earth's surface in the Middle and Late Jurassic, and extensive intermediate and acid intrusive rocks were developed in the southern North Huaiyang or northern Dabie Mountains during the basin's syndepositional stage.

Latest Triassic to Early Jurassic Thrusting and Exhumation in the Southern Ordos Basin, North China: Evidence from LA-ICP-MS-based Apatite Fission Track Thermochronology

The contractional structures in the southern Ordos Basin recorded critical evidence for the interaction between Ordos Basin and Qinling Orogenic Collage. In this study, we performed apatite fission track （AFT） thermochronology to unravel the timing of thrusting and exhumation for the Laolongshan-Shengrenqiao Fault （LSF） in the southern Ordos Basin. The AFT ages from opposite sides of the LSF reveal a significant latest Triassic to Early Jurassic time-temperature discontinuity across this structure. Thermal modeling reveals at the latest Triassic to Early Jurassic, a ~50~C difference in temperature between opposite sides of the LSF currently exposed at the surface. This discontinuity is best interpreted by an episode of thrusting and exhumation of the LSF with -1.7 km of net vertical displacement during the latest Triassic to Early Jurassic. These results, when combined with earlier thermochronological studies, stratigraphic contact relationship and tectono-sedimentary evolution, suggest that the southern Ordos Basin experienced coeval intense tectonic contraction and developed a north-vergent fold-and-thrust belt. Moreover, the southern Ordos Basin experienced a multi-stage differential exhumation during Mesozoic, including the latest Triassic to Early Jurassic and Late Jurassic to earliest Cretaceous thrust-driven exhumation as well as the Late Cretaceous overall exhumation. Specifically, the two thrust-driven exhumation events were related to tectonic stress propagation derived from the latest Triassic to Early Jurassic continued compression from Qinling Orogenic Collage and the Late Jurassic to earliest Cretaceous intracontinental orogeny of QinUng Orogenic Collage, respectively. By contrast, the Late Cretaceous overall exhumation event was related to the collision of an exotic terrain with the eastern margin of continental China at -100 Ma.

TWO PHASES OF CENOZOIC DEFORMATION IN NORTHEASTERN TIBET: THRUSTING FOLLOWED BY STRIKE-SLIP FAULTING

In order to establish deformation history for the Cenozoic development of the Tibetan Plateau, we conducted geologic mapping along a 120km traverse between Nangqian and Yushu in the northeastern Qiangtang terrane. This work reveals a complex interaction among Tertiary thrusting, strike\|slip faulting, sedimentation, and igneous activity. Two phases of deformation are recognized. The older northeast—southwest shortening, expressed by thrusting and folding, is followed by left\|slip faulting along northwest\|trending faults. Tertiary thrusts, predominantly southwest\|dipping, are distributed throughout the traverse, and typically juxtapose Mesozoic strata over Paleogene strata. The latter were deposited in several separated basins during folding and thrusting, as indicated by well\|developed growth strata. A preliminary construction of balanced cross\|sections suggests a minimum estimate of 45km of crustal shortening along the traverse. Numerous hypabyssal intrusions were mapped in the southern part of the traverse near Nangqian. They were emplaced into the Paleogene sediments and are dated between 36 and 33Ma by 40 Ar/ 39 Ar and U\|Pb methods. Paleogene sediments are also interbedded with volcanics in both the southern and northern parts of the study area. In the northernmost part of the traverse, a volcanic unit overlies a Tertiary thrust. This unit itself is broadly folded. This relationship suggests that Tertiary igneous activity was coeval with contractional deformation in the region, implying strongly the causal relationship between the two processes. The youngest event in the area is the development of northwest\|trending left\|slip faults. They cut Tertiary thrusts, folds, and about 35Ma igneous intrusions. In contrast to widely distributed Tertiary folds and thrusts, strike\|slip faulting is restricted only to the southern portion of our mapped area near Nangqian. The strike\|slip faults apparently control the distribution of modern drainage systems, suggesting that they may have been active recently. As the younger strike\|slip faults are subparallel to the older folds and thrusts, we have not been able to determine the magnitude of left\|slip on these faults. We interpret the termination of contractional deformation and the subsequent replacement by strike\|slip faulting as a result of both clockwise rotation of the region and westward propagation of strike\|slip deformation in eastern Tibet.

Impacts of thrusting,extensional faulting,and glaciation on cratering records of Pluto’s largest moon Charon:Implications for the evolution of Kuiper belt objects

A first-order question in the studies of the Solar System is how its outer zone known as the Kuiper belt was created and evolved.Two end-member models, involving coagulation vs. streaming instability, make different predictions-testable by the cratering history of Kuiper Belt Objects(KBOs)-about the cumulative size-frequency distribution(SFD) of the KBOs. Among all of the imaged KBOs, Pluto’s largest icy moon, Charon, appears to preserve the largest size range of seemingly undisturbed craters, their diameters(D) on Charon ranging from < 1 km to > 220 km. Current work shows that Charon’s craters with D < 10-20 km are fewer than those expected by the coagulation mechanism, but whether this is an artifact of post-cratering modification of smaller craters is unknown. We address this issue by conducting systematic photogeological mapping and performing detailed landform analysis using the highest resolution images obtained by the New Horizons spacecraft, which reveal a range of differentiable terrains on Charon. The most important findings of our work include(1) truncation and obliteration of large craters(diameters > 30-40 km) and their crater rim ridges along the eastern edges of several north-trending, eastward-convex, arcuate ranges in Oz Terra of the northern encountered hemisphere,(2) lobate ridges, lobate knob trains, and lobate aprons resembling glacial moraine landforms on Earth,(3) dendritic channel systems containing hanging valleys,and(4) locally striated surfaces defined by parallel ridges, knob trains, and grooves that are > 40-50 km in length. The above observations and the topographic dichotomy of Charon’s encountered hemisphere can be explained by a landscape-evolution model that involves(i)a giant impact that created the Vulcan Planitia basin and the extensional fault zone along its northern rim,(ii) a transient atmosphere capable of driving N2-ice glacial erosion of the water-ice bedrock and transporting water-ice debris to sedimentary basins,(iii) regional glacial erosion and transport of earlier emplaced impact ejecta deposits from the highlands of Oz Terra into the lowland basin of Vulcan Planitia,(iv) syn-glaciation north-trending thrusting, interpreted to have been induced by Charon’s despinning, and(v) the development of a water-ice debris cover layer over subsurface N2 ice below Vulcan Planitia during global deglaciation. The infilling of the Vulcan Planitia could have been accompanied by cryovolcanism. The extensive modification of impact craters means that the size-frequency distributions of Charon’s craters should serve only as a lower bound when used to test formation mechanisms proposed for Kuiper belt objects.

Early Cenozoic Mega Thrusting in the Qiangtang Block of the Northern Tibetan Plateau

Recent mapping and seismic survey reveal that intensive compression during the Early Cenozoic in the Qiangtang block of the central Tibetan Plateau formed an extensive complex of thrust sheets that moved relatively southward along several generally north-dipping great thrust systems. Those at the borders of the ~450 km wide block show it overrides the Lhasa block to the south and is overridden by the Hohxil-Bayanhar block to the north. The systems are mostly thin-skinned imbricate thrusts with associated folding. The thrust sheets are chiefly floored by Jurassic limestone that apparently slid over Triassic sandstone and shale, which is locally included, and ramped upward and over Paleocene-Eocene red-beds. Some central thrusts scooped deeper and carried up Paleozoic metamorphic rock, Permian carbonate and granite to form a central uplift that divides the Qiangtang block into two parts. These systems and their associated structures are unconformably overlain by little deformed Late Eocene-Oligocene volcanic rock or capped by Miocene lake beds. A thrust system in the northern part of the block, as well as one in the northern part of the adjacent Lhasa block, dip to the south and appear to be due to secondary adjustments within the thrust sheets. The relative southward displacement across this Early Cenozoic mega thrust system is in excess of 150 km in the Qiangtang block, and the average southward slip-rate of the southern Qiangtang thrusts ranged from 5.6 mm to 7.4 mm/a during the Late Eocene-Oligocene. This Early Cenozoic thrusting ended before the Early Miocene and was followed by Late Cenozoic crustal extension and strike-slip faulting within the Qiangtang block. The revelation and understanding of these thrust systems are very important for the evaluation of the petroleum resources of the region.

Late Caledonian Ductile Thrusting Deformation in the Central East Kunlun Belt, Qinghai, China and Its Significance: Evidence from Geochronology

A high-angle ductile thrusting deformation with top-to-the-north movement penetratively developed in the Proterozoic-Early Paleozoic metamorphic rocks along the Central East Kunlun belt. The deformed rocks suffered epidote-amphibolite facies metamorphism. On the basis of our previous study, we present more data in this paper to further support that the ducdle thrust deformation occurred in the later Caledonian and more detailed information about the deformation. A zircon U-Pb concordant age of 446±2.2 Ma of a deformed granodiorite in the ductile thrust zone was obtained and can be interpreted as the lower limit of the deformation. A syntectonically crystallized and also strongly deformed hornblende Ar/ Ar dating gives an Ar/Ar plateau age of 426.5±3.8 Ma, which represents the deformation age. A strongly orientated muscovite gives an Ar/Ar plateau age of 408±1.6Ma, representing the cooling age after the peak temperature, constraining the upper limit of the ductile thrust deformation. This ductile thrust deformation can be interpreted as the result of the closing of the Central East Kunlun archipelago ocean. To the north, Ar/Ar plateau ages of 382.9±0.2 Ma and 386.8±0.8 Ma of muscovite in the deformed Xiaomiao Group represent the uplift cooling ages of deeper rocks after the thrusting movement. The original thrusting foliation has a low angle. A rotation model was put forward to explain the development of the foliation from the original low-angle to present high-angle dipping.

Miocene Tectonic Evolution from Dextral-Slip Thrusting to Extension in the Nyainqentanglha Region of the Tibetan Plateau

Dextral-slip in the Nyainqentanglha region of Tibet resulted in oblique underthrusting and granite generation in the Early to Middle Miocene, but by the end of the epoch uplift and extensional faulting dominated. The east-west dextral-slip Gangdise fault system merges eastward into the northeast-trending, southeast-dipping Nyainqentanglha thrust system that swings eastward farther north into the dextral-slip North Damxung shear zone and Jiali faults. These faults were took shape by the Early Miocene, and the large Nyainqentanglha granitic batholith formed along the thrust system in 18.3-11.0 Ma as the western block drove under the eastern one. The dextral-slip movement ended at -11 Ma and the batholith rose, as marked by gravitational shearing at 8.6-8.3 Ma, and a new fault system developed. Northwest-trending dextral-slip faults formed to the northwest of the raisen batholith, whereas the northeast-trending South Damxung thrust faults with some sinistral-slip formed to the southeast. The latter are replaced farther to the east by the west-northwest-trending Lhtinzhub thrust faults with dextral-slip. This relatively local uplift that left adjacent Eocene and Miocene deposits preserved was followed by a regional uplift and the initiation of a system of generally north-south grabens in the Late Miocene at -6.5 Ma. The regional uplift of the southern Tibetan Plateau thus appears to have occurred between 8.3 Ma and 6.5 Ma. The Gulu, DamxungYangbajain and Angan graben systems that pass east of the Nyainqentanglha Mountains are locally controlled by the earlier northeast-trending faults. These grabens dominate the subsequent tectonic movement and are still very active as northwest-trending dextral-slip faults northwest of the mountains. The Miocene is a time of great tectonic change that ushered in the modern tectonic regime.

Large-scale thrusting at the northern Junggar Basin since Cretaceous and its implications for the rejuvenation of the Central Asian Orogenic Belt

The Wulungu Depression is the northernmost first-order tectonic unit in the Junggar Basin. It can be divided into three sub-units： the Hongyan step-fault zone, the Suosuoquan sag and the Wulungu south slope. The Cenozoic strata in the basin are intact and Mesozoic-Cenozoic deformation can be observed in the Wulungu step-fault zone, so this is an ideal place to study the Mesozoic-Cenozoic deformation. By integration of fault-related folding theories, regional geology and drilling data, the strata of the Cretaceous-Paleogene systems are divided into small layers which are selected as the subjects of this research. The combination of the developing unconformity with existing growth strata makes it conceivable that faults on the step-fault zone have experienced different degrees of reactivation of movement since the Cretaceous. Evolutionary analyses of the small layers using 2D-Move software showed certain differences in the reactivation of different segments of the Wulungu Depression such as the timing of reactivation of thrusting, for which the reactivity time of the eastern segment was late compared with those of the western and middle segments. In addition the resurrection strength was similarly slightly different, with the shortening rate being higher in the western segment than in the other segments. Moreover, the thrust fault mechanism is basement-involved combined with triangle shear fold, for which a forward evolution model was proposed.

Late Oligocene–Early Miocene Thrusting in Southern East Kunlun Mountains, Northern Tibetan Plateau

Southward thrusting occurred in Late Oligocene-Early Miocene in southern East Kunlun （昆仑） Mountains formed the South Kunlun thrust （SKT）. Permian strata and Triassic rocks were thrusted over the Paleocene-Eocene red-beds of Fenghuoshan （风火山） Group and Oligocene brownish red conglomerate and sandstone of Yaxicuo （雅西错） Group along SKT faults, formed tectonic slices, low-angle thrust faults, multi-scaled outliers, and nappe structures in south of Middle Kunlun fault （MKF）. In addition, SKT displacement or shortening is estimated to be -（30-35） km across Dongdatan （东大滩） valley and East Wenquan （温泉） basin. 39Ar-40Ar dating of chlorite of ductile shear zone along front thrust fault indicates that SKT thrusting occurred at 26.5±2.7 Ma, and fission track dating of apatite from mylonitic granite in SKT gives the age 26±2 Ma, corresponding to initial time of rapid uplift of East Kunlun Mountains. Thrust faults and folds of SKT were covered unconformably by Late Miocene lacustrine strata, and major thrusting of SKT ended before 13.5-14.5 Ma according to regional chronological data in northern Tibetan plateau.

On the evolution and formation of discharge morphology in pulsed dielectric barrier discharge

The discharge morphology of pulsed dielectric barrier discharge(PDBD) plays important roles in its applications. Here, we systematically investigated the effects of the voltage amplitude,discharge gap, and O_(2)content on the PDBD morphology, and revealed the possible underlying mechanism of the U-shaped formation. First, the morphological evolution under different conditions was recorded. A unique U-shaped region appears in the middle edge region when the gap is larger than 2 mm, while the entire discharge region remains columnar under a 2 mm gap in He PDBD. The width of the discharge and the U-shaped region increase with the increase in voltage, and decrease with the increase of the gap and O_(2)content. To explain this phenomenon,a two-dimensional symmetric model was developed to simulate the spatiotemporal evolution of different species and calculate the electric thrust. The discharge morphology evolution directly corresponds to the excited-state atomic reduction process. The electric thrust on the charged particles mainly determines the reaction region and strongly influences the U-shaped formation.When the gap is less than 2 mm, the electric thrust is homogeneous throughout the entire region,resulting in a columnar shape. However, when the gap is larger than 2 mm or O_(2)is added, the electric thrust in the edge region becomes greater than that in the middle, leading to the U-shaped formation. Furthermore, in He PDBD, the charged particles generating electric thrust are mainly electrons and helium ions, while in He/O_(2)PDBD those that generate electric thrust at the outer edge of the electrode surface are mainly various oxygen-containing ions.

Petrogenesis and Tectonic Implications of the Early Triassic Nianzi Adakitic Granite Unit in the Yanshan Fold and Thrust Belt:New Constraints from U-Pb Geochronology and Sr-Nd-Hf Isotopes

The Nianzi granite unit,which includes the Nianzi,Xiaolianghou and Xiawopu granitic intrusions,is a significant component of the northern part of the North China Craton(NCC)and is situated in the Yanshan fold and thrust belt(YFTB).However,there is still debate regarding the tectonic evolutionary history of the YFTB during the late Permian to Triassic period,specifically regarding the timing of subduction and collision between the NCC and the Paleo-Asian Ocean.The Nianzi granite unit exhibits unique petrological,geochronological and geochemical signatures that shed light on the tectonic evolutionary history of the YFTB.This study presents detailed petrology,whole-rock geochemistry,together with Sr-Nd isotopic,zircon U-Pb dating and Lu-Hf isotopic data of the granites within the Nianzi granite unit.Our findings demonstrate that the granites primarily consist of subhedral K-feldspar,plagioclase,quartz,minor biotite and hornblende,with accessory titanite,apatite,magnetite and zircon.Zircon U-Pb dating indicates that the Xiaolianghou granite was emplaced at 247.5±0.62 Ma.Additionally,the adakitic characteristics of the Nianzi,Xiawopu and Xiaolianghou granitic intrusions,such as high Sr and Ba contents and high ratios of Sr/Y and(La/Yb)N,combined with negative Sr-Nd and Lu-Hf isotopes(87Sr/86Sr)i=0.705681–0.7057433,εNd(t)=−21.98 to−20.97,zirconεHf(t)=−20.26 to−9.92,as well as the I-type granite features of high SiO_(2),Na_(2)O and K_(2)O/Na_(2)O ratios,enriched Rb,K,Sr and Ba,along with depleted Th,U,Nb,Ta,P and Ti,suggest that the Nianzi granitic unit was mainly derived from the partial melting of a thickened lower crust containing hydrous,calc-alkaline to high-K calc-alkaline,mafic to intermediate metamorphic rocks.In light of these parameters,we further integrate our data with previous studies and conclude that the Nianzi granitic unit was generated in a post-collisional extensional environment during the Early Triassic.

FAULT ROCKS AND SOUTHWARD THRUSTING OF DABIE COMPLEX IN EAST DABIE MOUNTAINS, ANHUI, CHINA

The essential part of Dabie Complex in the area discussed is composed of different kinds of fault rocks produced by two syntectonic slides during southward movements of Dabie Massif; some post tectonic ones, namely, thrusts superimpose upon them sub-

Early Cretaceous Thrust and Nappe Tectonics in North Qilian Shan,Northern Tibetan Plateau:Evidence from Field Mapping,Geochronology,and Deep Structural Analysis

The North Qilian Shan fold and thrust belt,located at the northern Tibetan Plateau and southern margin of the Hexi Corridor,is a key tectonic unit to decode the formation and expansion of the plateau.Previous studies emphasize the Cenozoic deformation due to the far-field response to the Indo-Asian collision,but the Mesozoic deformations are poorly constrained in this area.We conducted detailed field mapping,structural analysis,geochronology,and structural interpretation of deep seismic reflectional profiling and magnetotelluric(MT)sounding,to address the superposed results of the Mesozoic and Cenozoic deformation.The results recognized the North Qilian thrust and nappe system(NQTS),the root and the frontal belt are the North Qilian thrust(NQT),and the Yumu Shan klippe(YK),respectively.The middle belt is located between the NQT and the YK.Monzonitic granite zircon U-Pb dating from the middle belt yields an age of ca.415 Ma,which is similar to south NQT.The thrusting displacement is estimated at ca.48 km by structural interpretation of deep profiles.The timing is constrained in the early stage of the Early Cretaceous by the formation of simultaneous growth strata.We suggest that the NQTS has resulted from the far-field effect of the Lhasa-Qiangtang collision,and the Yumu Shan is uplifted by the superposed Cenozoic deformation.

Heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in foreland thrust belts: A case study of deep Cretaceous Qingshuihe Formation clastic reservoirs in southern Junggar Basin, NW China

Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.

Triassic Nappe in the Central Part of the Southern Central Asian Orogenic Belt(Ejinaq,NW China):Evidence from Structural Analysis and Geothermochronology

The thrust nappe played an important role in the Mesozoic tectonic evolution of the middle part of the Central Asian Orogenic Belt(CAOB).However,the timing,structural style and kinematic processes of the thrust nappe remain controversial,particularly the detail of the thrust nappe in the Guaizihu region(110 km east of Ejinaq).In this study,we investigate new field mapping,seismic sections,geochronology and low-temperature thermochronometric dating to provide constraints on the history of this thrust nappe in the Chaheilingashun area(northwestern Guaizihu region).The field mapping,seismic sections and structural analysis reveal that the autochthonous system had developed a series of strong fold structures in the upper Permian strata.The allochthonous system mainly contains Devonian monzogranite(U-Pb age,ranges from 386.7 to 389.0 Ma)and Meso–Neoproterozoic schists(the maximum depositional age,~880 Ma),which were thrust upon the upper Permian strata during Middle to Late Triassic.Based on similar rocks,geochronological dating and the Yagan thrust,we suggest that the postulated root zone of this allochthon might have originated from the Huhetaoergai area(40–60 km northwest of the study area).The geochronological results reveal that the lower age limit of this thrust nappe is constrained by the Lower–Middle Triassic syntectonic sediments(tuffaceous sandstone,~247 Ma),which is the sedimentary response of the fold structure.,The timing of the termination of this thrust nappe is defined by the cooling age(^(40)Ar/^(39)Ar data,217–211 Ma)of the Devonian monzogranite and Meso–Neoproterozoic schists.Thus,we consider this thrust event in the study area to potentially have occurred in the period from 247 Ma to 211 Ma,which may represent the tectonic response to the closure of the Paleo-Asian Ocean.

Engine Performance and Emission Characteristics of Cellulosic Jet Biofuel Blends

Aviation biofuels have the potential to reduce greenhouse gas emissions and improve engine performance. Theaim of this study was to assess the suitability of various jet biofuel blends for use in a ZF850 jet engine. The effects of theblends on engine performance were assessed under various thrust output settings with respect to the thrust, thrust-specificfuel consumption, emission characteristics, exhaust gas temperature, acceleration and deceleration performance. Blendingwith catalytic hydrothermolysis jet (CHJ) fuel improved the combustion efficiency by reducing carbon monoxide andunburned hydrocarbon emissions and markedly reducing PM2.5 emissions. However, a slight reduction in thrust output wasobserved. Throughout the entire range of thrust output settings, the 10% CHJ fuel blend provided higher thrust, lower thrustspecificfuel consumption, and lower exhaust gas temperature. The CHJ fuel blends exhibited no significant effects on thedeceleration performance, while the 5% and 15% blends caused a 0.4 s delay in the time required for complete acceleration.Global sensitivity analysis was conducted to better understand the effects of the fuel blends on engine performance andemission characteristics. This analysis identified the critical parameters of engine performance as engine-influence and fuelinfluenceparameters and engine-influence and fuel-less influence parameters. The overall engine efficiency benefit was nonlinearlyrelated to the blend ratio and thrust output. The results indicate that the use of CHJ fuel blends can improve engineefficiency if they comply with the engine design and control regulations.

前置预旋定子泵喷推进器辐射噪声数值预报

The requirement of low radiated noise is increasing for underwater propulsors as the noise significantly affecting the comfort and quietness of ships,submarines,and vessels.To broaden the view of noise characteristics of pump-jet propulsors(PJPs),this paper considers the radiated noise of a pre-swirl stator PJP with the effects of the advance coefficient and rotor rotational speed.Radiated noise is obtained by the“hybrid method”approach,which combines a hydrodynamic solver with a hydroacoustic solver.The turbulence flow is obtained through improved delayed detached eddy simulation(IDDES),which show good agreement with the experiment,including the performance and flow field.The solver precision,permeable surface size,and sampling frequency notably affect the noise calculation.The spectra of thrust fluctuation and radiated noise are characterized by the tonal phenomenon around the blade passing frequency and its harmonics.The spectrum of radiated noise and overall sound pressure level(OSPL)are considerably affected by both the advance coefficient and the rotor rotational speed.Overall,the numerical results and analysis given in this paper should be partly helpful in deepening the understanding of the radiated noise characteristics of PJPs.

Evolution of Coulomb failure stress in Sulaiman Lobe,Pakistan,and its implications for seismic hazard assessment

In this research work,we present the evolution of Coulomb failure stress(CFS)in the Sulaiman Lobe and its implications for seismic hazard assessment.The Chaman transform fault,~1,000 km long,is the major active fault that marks the western boundary between Pakistan and Afghanistan on the Indian Plate.To date,few studies have been conducted to unveil the interactions among earthquakes and the implications of these interactions for seismic hazard assessment in the region.We thoroughly investigated the published and online catalog to construct a sequence of major earthquakes that occurred in this region during the past.The final earthquake sequence was composed of 15 earthquakes of M_(w)≥6.0,beginning with the 1888 earthquake.We used the stress-triggering theory to numerically simulate the evolution of CFS caused by these earthquakes.The numerical results revealed that 8 out of 15earthquakes were triggered by the preceding earthquakes.The earthquakes in 1908,1910,1935,1966,and 1997 were rather independent earthquakes in this sequence.Although the epicenters of the 1975a and 1975b earthquakes were in the stress shadow zone,the partial rupture segments of both these earthquakes were in high-CFS regions.The CFS induced by the 1935 earthquake was notable,as it later triggered the 2008 doublet.Moreover,our results revealed that the northern segment of the Chaman Fault,the southern segment of the Ghazaband Fault,and the northwestern segment of the Urghargai Fault demonstrated a high change in CFS that could trigger seismicity in these regions.The necessary arrangements must therefore be made to mitigate any possible seismic hazards in the region.

Study of beam divergence and thrust vector eccentricity characteristics of the Hall thruster based on dual Faraday probe array planes and its applications

The accurate knowledge of the thrust vector eccentricity and beam divergence characteristics of Hall thrusters are of significant engineering value for the beneficial integration and successful application of Hall thrusters on spacecraft.For the characteristics of the plume bipolar diffusion due to the annular discharge channel of the Hall thruster,a Gaussian-fitted method for thrust vector deviation angle and beam divergence of Hall thrusters based on dual Faraday probe array planes was proposed in respect of the Hall thruster beam characteristics.The results show that the ratios of the deviation between the maximum and minimum values of the beam divergence angle and the thrust vector eccentricity angle using a Gaussian fit to the optimized Faraday probe dual plane to the mean value are 1.4%and 11.5%,respectively.The optimized thrust vector eccentricity angle obtained has been substantially improved,by approximately 20%.The beam divergence angle calculated using a Gaussian fitting to the optimized Faraday probe dual plane is approximately identical to the non-optimized one.The beam divergence and thrust vector eccentricity angles for different anode mass flow rates were obtained by averaging the beam divergence and thrust vector eccentricity angles calculated by the dual-plane,Gaussian-fitted ion current density method for different cross-sections.The study not only allows for an immediate and effective tool for determining the design of thrust vector adjustment mechanisms of spacecraft with different power Hall thrusters but also for characterizing the 3D spatial distribution of the Hall thruster plume.