To overcome hole-injection limitation of p^＋-n emitter junction in 4H-SiC light triggered thyristor, a novel high- voltage 4H-SiC light triggered thyristor with double-deck thin n-base structure is proposed and demon...To overcome hole-injection limitation of p^＋-n emitter junction in 4H-SiC light triggered thyristor, a novel high- voltage 4H-SiC light triggered thyristor with double-deck thin n-base structure is proposed and demonstrated by two- dimensional numerical simulations. In this new structure, the conventional thin n-base is split to double-deck. The hole- injection of p^＋-n emitter junction is modulated by modulating the doping concentration and thickness of upper-deck thin n- base. With double-deck thin n-base, the current gain coefficient of the top pnp transistor in 4H-SiC light triggered thyristor is enhanced. As a result, the triggering light intensity and the turn-on delay time of 4H-SiC light triggered thyristor are both reduced. The simulation results show that the proposed 10-kV 4H-SiC light triggered thyristor is able to be triggered on by 500-mW/cm^2 ultraviolet light pulse. Meanwhile, the turn-on delay time of the proposed thyristor is reduced to 337 ns.展开更多
A new 4 H–SiC light triggered thyristor（LTT） with 7-shaped thin n-base doping profile is proposed and simulated using a two-dimensional numerical method. In this new structure, the bottom region of the thin n-base ...A new 4 H–SiC light triggered thyristor（LTT） with 7-shaped thin n-base doping profile is proposed and simulated using a two-dimensional numerical method. In this new structure, the bottom region of the thin n-base has a graded doping profile to induce an accelerating electric field and compensate for the shortcoming of the double-layer thin n-base structure in transmitting injected holes. In addition, the accelerating electric field can also speed up the transmission of photongenerated carriers during light triggering. As a result, the current gain of the top pnp transistor of the SiC LTT is further increased. According to the TCAD simulations, the turn-on delay time of the SiC LTT decreases by about 91.5% compared with that of previous double-layer thin n-base SiC LTT. The minimum turn-on delay time of the SiC LTT is only 828 ns,when triggered by 100 mW/cm^2 ultraviolet light. Meanwhile, there is only a slight degradation in the forward blocking characteristic.展开更多
A new thyristor is proposed and realized in the foundry＇s 0.18-μm CMOS process for electrostatic dis-charge（ESD） protection.Without extra mask layers or process steps, the new ultra-low-voltage-trigger thyristor（...A new thyristor is proposed and realized in the foundry＇s 0.18-μm CMOS process for electrostatic dis-charge（ESD） protection.Without extra mask layers or process steps, the new ultra-low-voltage-trigger thyristor（ULVT thyristor） has a trigger voltage as low as 6.7 V and an ESD robustness exceeding 50 mA/μm, which enables effective ESD protection.Compared with the traditional medium-voltage-trigger thyristor（MVT thyristor）, the new structure not only has a lower trigger voltage, but can also provide better ESD protection under both positive and negative ESD zapping conditions.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51677149)
文摘To overcome hole-injection limitation of p^＋-n emitter junction in 4H-SiC light triggered thyristor, a novel high- voltage 4H-SiC light triggered thyristor with double-deck thin n-base structure is proposed and demonstrated by two- dimensional numerical simulations. In this new structure, the conventional thin n-base is split to double-deck. The hole- injection of p^＋-n emitter junction is modulated by modulating the doping concentration and thickness of upper-deck thin n- base. With double-deck thin n-base, the current gain coefficient of the top pnp transistor in 4H-SiC light triggered thyristor is enhanced. As a result, the triggering light intensity and the turn-on delay time of 4H-SiC light triggered thyristor are both reduced. The simulation results show that the proposed 10-kV 4H-SiC light triggered thyristor is able to be triggered on by 500-mW/cm^2 ultraviolet light pulse. Meanwhile, the turn-on delay time of the proposed thyristor is reduced to 337 ns.
基金Project supported by the National Natural Science Foundation of China(Grant No.51677149)
文摘A new 4 H–SiC light triggered thyristor（LTT） with 7-shaped thin n-base doping profile is proposed and simulated using a two-dimensional numerical method. In this new structure, the bottom region of the thin n-base has a graded doping profile to induce an accelerating electric field and compensate for the shortcoming of the double-layer thin n-base structure in transmitting injected holes. In addition, the accelerating electric field can also speed up the transmission of photongenerated carriers during light triggering. As a result, the current gain of the top pnp transistor of the SiC LTT is further increased. According to the TCAD simulations, the turn-on delay time of the SiC LTT decreases by about 91.5% compared with that of previous double-layer thin n-base SiC LTT. The minimum turn-on delay time of the SiC LTT is only 828 ns,when triggered by 100 mW/cm^2 ultraviolet light. Meanwhile, there is only a slight degradation in the forward blocking characteristic.
文摘A new thyristor is proposed and realized in the foundry＇s 0.18-μm CMOS process for electrostatic dis-charge（ESD） protection.Without extra mask layers or process steps, the new ultra-low-voltage-trigger thyristor（ULVT thyristor） has a trigger voltage as low as 6.7 V and an ESD robustness exceeding 50 mA/μm, which enables effective ESD protection.Compared with the traditional medium-voltage-trigger thyristor（MVT thyristor）, the new structure not only has a lower trigger voltage, but can also provide better ESD protection under both positive and negative ESD zapping conditions.
