The tight sandstone in the Tarim Basin has the characteristics of large burial depth and development of nature fractures due to concentrated in-situ stress. Identifying the present-day in-situ stress orientation is im...The tight sandstone in the Tarim Basin has the characteristics of large burial depth and development of nature fractures due to concentrated in-situ stress. Identifying the present-day in-situ stress orientation is important in hydrocarbon exploration and development, but also a key scientific question in understanding naturally fractured reservoirs. This paper presents a case study where we integrate various methods using wireline and image-log data, to identify present-day in-situ stress direction of ultra-deep fractured tight sandstone reservoirs, in the Kuqa depression. We discuss the formation mechanism of the elliptical borehole, compares the advantages and applicable conditions of the double caliper method,resistivity image logs and array sonic logs method. The well borehole diameter is measured orthogonally,then the ellipse is fitted, and the in-situ stress orientation is identified by the azimuth of the short-axis borehole, but it fails in the borehole expansion section, the fracture development section and the borehole collapse section. The micro-resistivity image logs method reveals the borehole breakouts azimuth, and also the strike of induced fractures, which are used to determine the orientation of in-situ stress. However, under water-based mud conditions, it’s hard to distinguish natural fractures from induced fractures by image logs. Under oil-based mud conditions, the induced fractures are difficult to identify due to the compromised image quality. As for the sonic log, shear waves will split when passing through an anisotropic formation, shear waves will split during propagation, and the azimuth of fast shear waves is consistent with the orientation of in-situ stress. However, it is usually affected by the anisotropy caused by the excessively fast rotation of the well log tools, so that the azimuth of fast shear wave cannot effectively reflect the orientation of the in-situ stress. Based on comprehensive assessment and comparison, in this paper we propose a method integrating various logging data to identify the orientation of in-situ stress. Among various types of logging data, the breakouts azimuth identified by image logs is proved to be the most credible in identifying the orientation of in-situ stress, while using the direction of induced fractures under water-based mud conditions is also viable. However, the azimuth of the fast shear wave is consistent with the orientation of maximum in-situ stress only when the rotation speed of the logging tool is low. The caliper method can be used as a reference for verifying the other two methods. Using this integrated method to study the orientation of in-situ stress in the Keshen8 trap, the results show that faults are an important factor affecting the direction of in-situ stress, while multi-level faults will produce superimposed effects that cause the current direction of in-situ stress to change.展开更多
This study aimed to investigate the causes and managements of the fractures and migrations of the implantable venous access port catheter(IVAPC). The fracture or migration of IVAPC occurred in 4 patients who were tr...This study aimed to investigate the causes and managements of the fractures and migrations of the implantable venous access port catheter(IVAPC). The fracture or migration of IVAPC occurred in 4 patients who were treated between May 2012 and January 2014 in Union Hospital,Wuhan,China. The port catheter leakage was found in 2 cases during drug infusion. Catheters that dislodged to the superior vena cava and right atrium were confirmed by port angiogram. The two dislodged catheters were successfully retrieved by interventional procedures. Catheter fracture occurred in two cases during port removal. One catheter was eventually removed from the subclavian vein through right clavicle osteotomy and subclavian venotomy,and the other removed by external jugular venotomy. Flushing the port in high pressure and injury of the totally implantable venous access port(TIVP) during implantation are usually responsible for catheter displacement. Interventional retrieval procedure can be used if the catheter dislodges to the vena cava and right atrium. Catheter fracture may occur during removal if clipping syndrome occurs or the catheter is sutured very tight during implantation.展开更多
Working fluids loss is a major contributor to low productivity during production process of fractured tight reservoirs.Lost circulation control effect directly related to the tribological behavior between fracture sur...Working fluids loss is a major contributor to low productivity during production process of fractured tight reservoirs.Lost circulation control effect directly related to the tribological behavior between fracture surface and lost circulation materials(LCMs).In this study,the friction coefficient(FC)was investigated using typical clastic rocks and LCMs by considering multiple effect factors divided into external condition and internal condition.The results show that normal load had a relatively high effect on sliding model.A positive correlation was observed between FC and asperities heights.FC decreased induced by particle size degradation of rigid LCMs.Elastic LCMs manifested higher FC compared with rigid LCMs.Under the lubrication condition by working fluid,FC of rigid LCMs was mainly controlled by their surface wettability.FC of organic LCMs is more sensitive to high temperature aging than inorganic LCMs.Fracture plugging experiments show that LCMs optimized based on the research results can effectively improve the efficiency and strength of fracture plugging.展开更多
Accelerating mass exchange between matrix and fractures is the essence of enhanced oil recovery(EOR)in tight formations after natural depletion.Low salinity water(LSW)injection has been commerciallyproven in conventio...Accelerating mass exchange between matrix and fractures is the essence of enhanced oil recovery(EOR)in tight formations after natural depletion.Low salinity water(LSW)injection has been commerciallyproven in conventional reservoirs EOR,with scale projects in progress worldwide.There is,however,a lack of understanding of the EOR effect in tight formations.Therefore,in this work,we introduced LSWEOR to a target tight formation using huff-puff mode.Spontaneous imbibition(SI)tests were firstly performed on homogenous Berea sandstone cores with decreasing salinity brine to observe the production response.The results indicated that the oil recovery of the tight rock was boosted by tuning brine salinity.Of all the used brines with salinity ranging from 0.021%to 2.1%TDS(total dissolved salinity),the 0.21%TDS brine showed a rapid increase in oil production over imbibing time,which finally led to an incremental oil recovery of 4.5%OOIP(original oil in place).Core-scale modeling was conducted by history-matching the oil recovery dynamics of the SI results through modifying capillary pressure and relative permeability.A full-scale reservoir model was constructed using micro-seismic data to model fracture geometry combing fracturing results and scaling parameters obtained from core scale historymatching.It is proven that LSW huff-n-puff stimulated the oil production after natural depletion and improved MEE(mass exchange efficiency)of the target formation,but the EOR benefit was not comparable to CO2 and surfactant-assisted water huff-puff methods.展开更多
基金financial support for this work comes from the Science Foundation of CUPB(No.2462017YJRC023)supported by the Exploration and Development Research Institute of Petro China Tarim Oilfield Branch Company
文摘The tight sandstone in the Tarim Basin has the characteristics of large burial depth and development of nature fractures due to concentrated in-situ stress. Identifying the present-day in-situ stress orientation is important in hydrocarbon exploration and development, but also a key scientific question in understanding naturally fractured reservoirs. This paper presents a case study where we integrate various methods using wireline and image-log data, to identify present-day in-situ stress direction of ultra-deep fractured tight sandstone reservoirs, in the Kuqa depression. We discuss the formation mechanism of the elliptical borehole, compares the advantages and applicable conditions of the double caliper method,resistivity image logs and array sonic logs method. The well borehole diameter is measured orthogonally,then the ellipse is fitted, and the in-situ stress orientation is identified by the azimuth of the short-axis borehole, but it fails in the borehole expansion section, the fracture development section and the borehole collapse section. The micro-resistivity image logs method reveals the borehole breakouts azimuth, and also the strike of induced fractures, which are used to determine the orientation of in-situ stress. However, under water-based mud conditions, it’s hard to distinguish natural fractures from induced fractures by image logs. Under oil-based mud conditions, the induced fractures are difficult to identify due to the compromised image quality. As for the sonic log, shear waves will split when passing through an anisotropic formation, shear waves will split during propagation, and the azimuth of fast shear waves is consistent with the orientation of in-situ stress. However, it is usually affected by the anisotropy caused by the excessively fast rotation of the well log tools, so that the azimuth of fast shear wave cannot effectively reflect the orientation of the in-situ stress. Based on comprehensive assessment and comparison, in this paper we propose a method integrating various logging data to identify the orientation of in-situ stress. Among various types of logging data, the breakouts azimuth identified by image logs is proved to be the most credible in identifying the orientation of in-situ stress, while using the direction of induced fractures under water-based mud conditions is also viable. However, the azimuth of the fast shear wave is consistent with the orientation of maximum in-situ stress only when the rotation speed of the logging tool is low. The caliper method can be used as a reference for verifying the other two methods. Using this integrated method to study the orientation of in-situ stress in the Keshen8 trap, the results show that faults are an important factor affecting the direction of in-situ stress, while multi-level faults will produce superimposed effects that cause the current direction of in-situ stress to change.
文摘This study aimed to investigate the causes and managements of the fractures and migrations of the implantable venous access port catheter(IVAPC). The fracture or migration of IVAPC occurred in 4 patients who were treated between May 2012 and January 2014 in Union Hospital,Wuhan,China. The port catheter leakage was found in 2 cases during drug infusion. Catheters that dislodged to the superior vena cava and right atrium were confirmed by port angiogram. The two dislodged catheters were successfully retrieved by interventional procedures. Catheter fracture occurred in two cases during port removal. One catheter was eventually removed from the subclavian vein through right clavicle osteotomy and subclavian venotomy,and the other removed by external jugular venotomy. Flushing the port in high pressure and injury of the totally implantable venous access port(TIVP) during implantation are usually responsible for catheter displacement. Interventional retrieval procedure can be used if the catheter dislodges to the vena cava and right atrium. Catheter fracture may occur during removal if clipping syndrome occurs or the catheter is sutured very tight during implantation.
基金the Science and technology program of Sichuan Province(2018JY0436)the Innovation Fund for Postgraduates Research of Southwest Petroleum University(2019cxyb027)+2 种基金Important and Special Project of China(No.2016ZX05052)sponsored by the Ministry of Science and Technology of ChinaNational Natural Science Foundation of China(51604236).
文摘Working fluids loss is a major contributor to low productivity during production process of fractured tight reservoirs.Lost circulation control effect directly related to the tribological behavior between fracture surface and lost circulation materials(LCMs).In this study,the friction coefficient(FC)was investigated using typical clastic rocks and LCMs by considering multiple effect factors divided into external condition and internal condition.The results show that normal load had a relatively high effect on sliding model.A positive correlation was observed between FC and asperities heights.FC decreased induced by particle size degradation of rigid LCMs.Elastic LCMs manifested higher FC compared with rigid LCMs.Under the lubrication condition by working fluid,FC of rigid LCMs was mainly controlled by their surface wettability.FC of organic LCMs is more sensitive to high temperature aging than inorganic LCMs.Fracture plugging experiments show that LCMs optimized based on the research results can effectively improve the efficiency and strength of fracture plugging.
基金support of National Natural Science Foundation of China(51974265 and 51804264)Youth Science and Technology Innovation Team of SWPU(2017CXTD04)。
文摘Accelerating mass exchange between matrix and fractures is the essence of enhanced oil recovery(EOR)in tight formations after natural depletion.Low salinity water(LSW)injection has been commerciallyproven in conventional reservoirs EOR,with scale projects in progress worldwide.There is,however,a lack of understanding of the EOR effect in tight formations.Therefore,in this work,we introduced LSWEOR to a target tight formation using huff-puff mode.Spontaneous imbibition(SI)tests were firstly performed on homogenous Berea sandstone cores with decreasing salinity brine to observe the production response.The results indicated that the oil recovery of the tight rock was boosted by tuning brine salinity.Of all the used brines with salinity ranging from 0.021%to 2.1%TDS(total dissolved salinity),the 0.21%TDS brine showed a rapid increase in oil production over imbibing time,which finally led to an incremental oil recovery of 4.5%OOIP(original oil in place).Core-scale modeling was conducted by history-matching the oil recovery dynamics of the SI results through modifying capillary pressure and relative permeability.A full-scale reservoir model was constructed using micro-seismic data to model fracture geometry combing fracturing results and scaling parameters obtained from core scale historymatching.It is proven that LSW huff-n-puff stimulated the oil production after natural depletion and improved MEE(mass exchange efficiency)of the target formation,but the EOR benefit was not comparable to CO2 and surfactant-assisted water huff-puff methods.