Application of Pore Evolution and Fracture Development Coupled Models in the Prediction of Reservoir "Sweet Spots" in Tight Sandstones

The Chang-63 reservoir in the Huaqing area has widely developed tight sandstone ＂thick sand layers, but not reservoirs characterized by rich in oil＂, and it is thus necessary to further study its oil and gas enrichment law. This study builds porosity and fracture development and evolution models in different deposition environments, through core observation, casting thin section, SEM, porosity and permeability analysis, burial history analysis, and ＂four-property-relationships＂ analysis.

Experimental study of enhanced oil recovery by CO_(2) huff-n-puff in shales and tight sandstones with fractures

The fractures and kerogen,which generally exist in the shale,are signifcant to the CO_(2) huf-n-puf in the shale reservoir.It is important to study the efects of fractures and kerogen on oil recovery during CO_(2) huf-n-puf operations in the fracture-matrix system.In this study,a modifed CO_(2) huf-n-puf experiment method is developed to estimate the recovery factors and the CO_(2) injectivity in the fractured organic-rich shales and tight sandstones.The efects of rock properties,injection pressure,and injection time on the recovery factors and CO_(2) usage efciency in shales and sandstones are discussed,respectively.The results show that although the CO_(2) injectivity in the shale is higher than that in the sandstone with the same porosity;besides,the recovery factors of two shale samples are much lower than that of two sandstone samples.This demonstrates that compared with the tight sandstone,more cycles are needed for the shale to reach a higher recovery factor.Furthermore,there are optimal injection pressures(close to the minimum miscible pressure)and CO_(2) injection volumes for CO_(2) huf-npuf in the shale.Since the optimal CO_(2) injection volume in the shale is higher than that in the sandstone,more injection time is needed to enhance the oil recovery in the shale.There is a reference sense for CO_(2) huf-n-puf in the fractured shale oil reservoir for enhanced oil recovery(EOR)purposes.

Modified method for fracability evaluation of tight sandstones based on interval transit time

Fracability is a property that indicates how easy reservoir rocks can be fractured in hydraulic fracturing operations.It is a key parameter for fracturing design and evaluation.In order to utilize continuous logging data to predict fracability,synchronous tests of dynamic and static mechanical parameters of rocks under different confining pressures were conducted on13 tight sandstone samples derived from the central Junggar Basin,China.A modified formula between dynamic and static mechanical parameters was established.Fracability of the tight reservoir in the Junggar Basin was then evaluated based on brittleness index,fracture toughness,and fracability index.The effectiveness of fracturing was analyzed combined with the oil testing curve after hydraulic fracturing.The results show that:(1)The distribution of oil-bearing formations in the studied area coincides well with stratum of higher fracability index.(2)The critical fracability index is determined to be 0.3,three formations are selected as fracturing candidates,and a thin mudstone interbed is identified in the oil-bearing formation.(3)Well testing curve verifies the reliability of the fracability evaluation method and the accuracy of the modified formula between dynamic and static mechanical parameters.This study provides useful information for improving fracturing operations of tight oil and gas reservoirs.

Influence of bedding structure on stress-induced elastic wave anisotropy in tight sandstones

To understand the evolution of stress-induced elastic wave anisotropy,three triaxial experiments were performed on sandstone specimens with bedding orientations parallel,perpendicular,and oblique to the maximum principal stress.P-wave velocities along 64 different directions on each specimen were monitored frequently to understand the anisotropy change at various stress levels by fitting Thomsen’s anisotropy equation.The results show that the elastic wave anisotropy is very sensitive to mechanical loading.Under hydrostatic loading,the magnitude of anisotropy is reduced in all three specimens.However,under deviatoric stress loading,the evolution of anisotropic characteristics(magnitude and orientation of the symmetry axis)is bedding orientation dependent.Anisotropy reversal occurs in specimens with bedding normal/oblique to the maximum principal stress.P-wave anisotropyε0 is linearly related to volumetric strain Sv and dilatancy,indicating that stress-induced redistribution of microcracks has a significant effect on P-wave velocity anisotropy.The closure of initial cracks and pores aligned in the bedding direction contributes to the decrease of the anisotropy.However,opening of new cracks,aligned in the maximum principal direction,accounts for the increase of the anisotropy.The experimental results provide some insights into the microstructural behavior under loading and provide an experimental basis for seismic data interpretation and parameter selection in engineering applications.

Fracture identification and evaluation using conventional logs in tight sandstones:A case study in the Ordos Basin,China

Fractures are of great significance to tight oil and gas development.Fracture identification using conventional well logs is a feasible way to locate the underground fractures in tight sandstones.However,there are three problems affecting its interpretation accuracy and practical application,namely weak well log responses of fractures,a lack of specific logs for fracture prediction,and relative change omission in log responses.To overcome these problems and improve fracture identification accuracy,a fracture indicating parameter(FIP)method composed of a comprehensive index method(CIM)and a comprehensive fractal method(CFM)is introduced.The CIM tries to handle the first problem by amplifying log responses of fractures.The CFM addresses the third one using fractal dimensions.The flexible weight parameters corresponding to logs in the CIM and CFM make the interpretation possible for wells lacking specific logs.The reconstructed logs in the CIM and CFM try to solve the second problem.It is noted that the FIP method can calculate the probability of fracture development at a certain depth,but cannot show the fracture development degree of a new well compared with other wells.In this study,a formation fracture intensity(FFI)method is also introduced to further evaluate fracture development combined with production data.To test the validity of the FIP and FFI methods,fracture identification experiments are implemented in a tight reservoir in the Ordos Basin.The results are consistent with the data of rock core observation and production,indicating the proposed methods are effective for fracture identification and evaluation.

Authigenic clay minerals and calcite dissolution influence reservoir quality in tight sandstones:Insights from the central Junggar Basin,NW China

Authigenic clays and calcite cements are important in the development of reservoir tightness and the formation of hydrocarbon sweet spots.We investigated Jurassic low-permeability sandstone reservoirs in the central Junggar Basin,NW China,using petrography,mineralogy,porosity,and permeability assessment,and stable C and O isotope analysis to ascertain the influence of authigenic clays and calcites on reservoir quality.Here,we establish the properties and diagenetic processes of the reservoir sandstones,and construct a generalizable model of reservoir quality.The results show that the sandstones are mainly litharenite and feldspathic litharenite and can be classified into ductile-lithic-rich sandstones and ductile-lithic-poor sandstones according to rock composition.The ductile-lithic-rich sandstones are tight(mean porosity?7.31%;mean permeability?0.08 mD)as a result of intense compaction.In contrast,the ductile-lithic-poor sandstones can be classified into five types according to diagenetic process.The formation of favorable hydrocarbon reservoir properties is closely related to the presence of authigenic clays and dissolution of calcite.In particular,kaolinite fills intergranular pores,thereby blocking pore space and reducing reservoir quality.Chlorite coating resists compaction and limits the formation of quartz overgrowths,thereby preserving pore space and enhancing reservoir quality.Calcite controls reservoir quality through both precipitation and dissolution.Calcite precipitation results in reduced reservoir quality,whereby early calcites that were precipitated in formation water resist compaction and provide the basis for subsequent dissolution and late precipitation,whereas dissolution of calcite in mesodiagenesis improves reservoir quality.A generalized model is formulated by relating diagenetic facies types to depth and porosity,providing a reference for other similar reservoirs.Our data suggest that deeply buried tight sandstones can be exploration prospects under favorable conditions involving the presence of authigenic clays and dissolution of calcite,as in the central Junggar Basin of this study.

Investigating microscopic seepage characteristics and fracture effectiveness of tight sandstones:a digital core approach

Microscopic seepage characteristics are critical for the evaluation of tight sandstone reservoirs.In this study,a digital core approach integrating microscopic seepage simulation and CT scanning was developed to characterize microscopic seepage and fracture effectiveness(the ratio of micro-fractures that contributes to fluid flow)of tight sandstones.Numerical simulations were carried out for characterizations of tight sandstones.The results show that the axial permeability of the investigated cylindrical tight sandstone from Junggar Basin in China is 0.460μm~2,while the radial permeability is 0.3723μm~2,and the axial and radial effective fracture ratios are 0.4387 and 0.4806,respectively,indicating that cracks are not fully developed and the connectivity between micro-cracks is poor.Directional permeability that is difficult to measure by laboratory experiments can be obtained readily using the proposed method in this paper.The results provide important information for improving the exploration and development of tight sandstone reservoirs.

Reservoir characteristics and controlling factor of tight sandstone in Shuixigou Group in Taibei depression,Turpan-Hami basin

The positive structure belts surrounding the Taibei Sag,Turpan-Hami Basin,have been the main targets for oil and gas exploration for years and are now left with remaining resources scattering in reservoirs adjacent to source rocks in the sag,where the Shuixigou Group with substantial oil and gas potential constitutes the primary focus for near-source exploration.Consequently,characterization of development and key controlling factors of reservoir space becomes a must for future exploration in the area.This study investigates the development traits,genesis,and controlling factors of the Xishanyao and Sangonghe formations in the Shengbei and Qiudong Sub-sags of the Taibei Sag with techniques such as cast thin-section observation,porosity and permeability tests,high-pressure mercury injection,and saturation fluid NMR analysis of reservoir rocks.The findings reveal that the Shuixigou Group in the Taibei Sag consists of lithic sandstone.Reservoirs in the group are mostly poor in terms of physical properties,with undeveloped primary pores dominated by intergranular dissolved pores as a result of a strong compaction.Comparative analysis of key controlling factors of the Sangonghe Formation reveals significant distinctions in sandstone particle size,sand body thickness,genesis and distribution,provenance location,and source rock type between the Qiudong area and Shengbei area.Vertically,the coal seams of the Xishanyao Formation exhibit heightened development with shallower burial depth and lower maturity compared to those of the Sangonghe Formation.Consequently,this environment fosters the formation of organic acids,which have a stronger dissolution effect on minerals to develop secondary dissolution pores,and ultimately resulting in better reservoir physical properties.Overall,the reservoirs within the Qiudong area of the Taibei Sag demonstrate superior characteristics compared to those in the Shengbei area.Furthermore,the reservoir physical properties of the Xishanyao Formation are better than those of the Sangonghe Formation.The research findings will provide valuable guidance for the exploration and development of lithological oil and gas reservoirs within the Taibei Sag.

Gas-Water Production of a Continental Tight-Sandstone Gas Reservoir under Different Fracturing Conditions

A numerical model of hydraulic fracture propagation is introduced for a representative reservoir(Yuanba continental tight sandstone gas reservoir in Northeast Sichuan).Different parameters are considered,i.e.,the interlayer stress difference,the fracturing discharge rate and the fracturing fluid viscosity.The results show that these factors affect the gas and water production by influencing the fracture size.The interlayer stress difference can effectively control the fracture height.The greater the stress difference,the smaller the dimensionless reconstruction volume of the reservoir,while the flowback rate and gas production are lower.A large displacement fracturing construction increases the fracture-forming efficiency and expands the fracture size.The larger the displacement of fracturing construction,the larger the dimensionless reconstruction volume of the reservoir,and the higher the fracture-forming efficiency of fracturing fluid,the flowback rate,and the gas production.Low viscosity fracturing fluid is suitable for long fractures,while high viscosity fracturing fluid is suitable for wide fractures.With an increase in the fracturing fluid viscosity,the dimensionless reconstruction volume and flowback rate of the reservoir display a non-monotonic behavior,however,their changes are relatively small.

A Data-Oriented Method to Optimize Hydraulic Fracturing Parameters of Tight Sandstone Reservoirs

Based on the actual data collected from the tight sandstone development zone, correlation analysis using theSpearman method was conducted to determine the main factors influencing the gas production rate of tightsandstone fracturing. An integrated model combining geological engineering and numerical simulation of fracturepropagation and production was completed. Based on data analysis, the hydraulic fracture parameters wereoptimized to develop a differentiated fracturing treatment adjustment plan. The results indicate that the influenceof geological and engineering factors in the X1 and X2 development zones in the study area differs significantly.Therefore, it is challenging to adopt a uniform development strategy to achieve rapid production increase. Thedata analysis reveals that the variation in gas production rate is primarily affected by the reservoir thickness andpermeability parameters as geological factors. On the other hand, the amount of treatment fluid and proppantaddition significantly impact the gas production rate as engineering factors. Among these factors, the influence ofgeological factors is more pronounced in block X1. Therefore, the main focus should be on further optimizing thefracturing interval and adjusting the geological development well location. Given the existing well location, thereis limited potential for further optimizing fracture parameters to increase production. For block X2, the fracturingparameters should be optimized. Data screening was conducted to identify outliers in the entire dataset, and adata-driven fracturing parameter optimization method was employed to determine the basic adjustment directionfor reservoir stimulation in the target block. This approach provides insights into the influence of geological,stimulation, and completion parameters on gas production rate. Consequently, the subsequent fracturing parameteroptimization design can significantly reduce the modeling and simulation workload and guide field operations toimprove and optimize hydraulic fracturing efficiency.

Petrophysical and capillary pressure properties of the upper Triassic Xujiahe Formation tight gas sandstones in western Sichuan,China

The tight sandstones of the Upper Triassic Xujiahe Formation（T_3x） constitute important gas reservoirs in western Sichuan.The Xujiahe sandstones are characterized by low to very low porosity （av.5.22%and 3.62%） for the T_3x^4 and T_3x^2 sandstones,respectively）,extremely low permeability（av. 0.060 mD and 0.058 mD for the T_3x^4 and T_3x^2 sandstones,respectively）,strong heterogeneity,micronano pore throat,and poor pore throat sorting.As a result of complex pore structure and the occurrence of fractures,weak correlations exist between petrophysical properties and pore throat size,demonstrating that porosity or pore throat size alone does not serve as a good permeability predictor.Much improved correlations can be obtained between permeability and porosity when pore throat radii are incorporated. Correlations between porosity,permeability,and pore throat radii corresponding to different saturations of mercury were established,showing that the pore throat radius at 20%mercury saturation（R_（20）） is the best permeability predictor.Multivariate regression analysis and artificial neural network（ANN） methods were used to establish permeability prediction models and the unique characteristics of neural networks enable them to be more successful in predicting permeability than the multivariate regression model.In addition, four petrophysical rock types can be identified based on the distributions of R_（20）,each exhibiting distinct petrophysical properties and corresponding to different flow units.

Key Elements Controlling Oil Accumulation within the Tight Sandstones

Tight oil sandstone reservoirs with low porosity and permeability, which are an unconventional petroleum resource, have been discovered in the Jurassic intervals of the central Junggar Basin, the northwestern China. To reveal the accumulation mechanism, a relatively comprehensive research was conducted, including oil-source correlation, porosity evolution, and hydrocarbon charging history. The results show that crude oil of these tight sandstone reservoirs were mainly from Permian source rocks with some contribution from Jurassic source rocks. The reservoirs were buried at shallow depth（〈3 100 m） and exposed to weak diagenesis, and thus had high porosity（18.5%） when the Permian-sourced oil from Permian source rock was charging, indicating high GOI values（〉5%）. In contrast, the sandstone reservoir had already become tight and did not provide available space to accumulate oil due to severe compaction and cementation when hydrocarbon from Jurassic source rock filled, evidenced by low GOI values（〈5%）. Therefore, reservoir porosity controls the oil accumulation within tight sandstone. Whether tight sandstone reservoirs accumulate oil depends on the reservoir quality when hydrocarbons charge. Before the exploration of tight oil sandstone reservoirs, it should be required to investigate the relationship between oil charging history and porosity evolution to reduce the exploration risk and figure out the available targets.

Formation condition of deep gas reservoirs in tight sandstones in Kuqa Foreland Basin

Due to the high expense of deep oil and gas exploration,prediction of gas-bearing properties before drilling is crucial for deep gas reservoir of tight sandstone.Deep tight sandstone gas fields in Kuqa Foreland Basin are characterized by high abundance,high gas saturation,high pressure,high and stable yield,which belong to high-efficiency tight gas reservoir.Based on theoretical analysis of controlling factors and mechanisms of gas-bearing properties for tight sandstone gas reservoir,and taking tight sandstone gas fields with high effectiveness such as Dibei,Keshen and Dibei gas fields in Kuqa Foreland Basin as examples,formation condition and mechanism of high-efficiency tight sandstone gas reservoir in Kuqa area are studied through a comparative analysis of typical tight sandstone gas reservoir in Sichuan Basin and Ordos Basin.The results show that the formation condition of deep gas reservoir of tight sandstone in Kuqa foreland basin includes four factors:i.e.,overpressure gas charging,fracture development,“early-oil and late-gas”accumulation process and favorable preservation condition.The overpressure gas charging and fracture development are the most important factors for formation of high-efficiency tight gas reservoirs in Kuqa Foreland Basin.High-quality source rocks,high sourcereservoir pressure difference,and overpressure filling induced thereby are preconditions for formation of tight sandstone with high gas saturation.The fracture development controls gas migration,accumulation,and high yield of tight sandstone gas reservoir.The reservoir wettability changed by the early oil charging is beneficial to late natural gas charging,and the preservation condition of high-quality gypsum cap rocks is the key factor for gas reservoirs to maintain overpressure and high gas saturation.Matching of above four favorable factors leads to the tight sandstone gas reservoir with high abundance,high gas saturation and high gas production in Kuqa Foreland Basin,which is very different from other basins.Under the condition of little difference in physical property of tight sandstone reservoir,excessive source-reservoir pressure difference,facture development,preservation condition and current formation overpressure are the most significant factors to be considered in exploration and evaluation of deep tight sandstone gas.

Experimental study of surfactant-enhanced spontaneous imbibition in fractured tight sandstone reservoirs: The effect of fracture distribution

Spontaneous imbibition is an important phenomenon in tight reservoirs.The existence of a large number of fractures and micro-nano pores is the key factor affecting the spontaneous imbibition of tight reservoirs.In this study,based on high-pressure mercury injection and nuclear magnetic resonance experiments,the pore distribution of tight sandstone is described.The influence of fractures,core porosity and permeability,and surfactants on the spontaneous imbibition of tight sandstone are studied by physical fracturing,interfacial tension test,wettability test and imbibition experiments.The results show that:the pore radius of tight sandstone is concentrated in 0.01-1 mm.Fractures can effectively reduce the oil drop adsorption on the core surface,enhancing the imbibition recovery of the tight sandstone with an increase of about 10%.As the number of fractures increases,the number of oil droplets adsorbed on the core surface decrease and the imbibition rate increases.The imbibition recovery increases with the increase in pore connectivity,while the imbibition rate increases with the increases in core porosity and permeability.The surfactant can improve the core water wettability and reduce the oilwater interfacial tension,reducing the adsorption of oil droplets on the core surface,and improving the core imbibition recovery with an increase of about 15%.In a word,the existence of fractures and surfactants can enhance the pore connectivity of the reservoir,reduce the adsorption of oil droplets on the core surface,and improve the imbibition rate and recovery rate of the tight oil reservoir.

Geological characteristics and models of fault-foldfracture body in deep tight sandstone of the second member of Upper Triassic Xujiahe Formation in Xinchang structural belt of Sichuan Basin,SW China

In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.

Multi-scale fractures formation and distribution in tight sandstones—a case study of Triassic Chang 8 Member in the southwestern Ordos Basin

Fracture system is an important factor controlling tight oil accumulation in the Triassic Chang 8 Member,southwestern Ordos Basin,China.A systematic characterization of the multi-scale natural fractures is a basis for the efficient tight oil production.Based on outcrops,seismic reflections,well cores,well logs(image and conventional logging),casting thin sections,and scanning electron microscope observation,the multi-scale fractures occurrences and their influences on Chang 8 tight sandstone reservoirs are revealed.The results show that three periods of strike-slip faults and four scales of natural fractures developed,namely mega-scale(length>7×10^(7) mm),macro-scale(3.5×10^(5)<length<7×10^(7) mm),meso-scale(10<length<3.5×10^(5) mm),and micro-scale(length<10 mm)fractures.The mega-and macro-scale fractures developed by strike-slip faults are characterized by strike-segmentation and lateral zonation,which connect the source and reservoir.These scale fractures also influence the distribution and effectiveness of traps and reservoirs,which directly influence the hydrocarbon charging and distribution.The meso fractures include the tectonic,diagenetic,as well as hydrocarbon generation-related overpressure types.The meso-and micro-scale fractures improve the sandstone physical properties and also the tight oil well production performance.This integrated study helps to understand the distribution of multi-scale fractures in tight sandstones and provides a referable case and workflow for multi-scale fracture evaluation.

A new NMR-data-based method for predicting petrophysical properties of tight sandstone reservoirs

Evaluating the permeability and irreducible water saturation of tight sandstone reservoirs is challenging.This study uses distribution functions to fit measured NMR T_(2)distributions of tight sandstone reservoirs and extract parameters for characterizing pore size distribution.These parameters are then used to establish prediction models for permeability and irreducible water saturation of reservoirs.Results of comparing the fit of the T_(2)distributions by the Gauss and Weibull distribution functions show that the fitting accuracy with the Weibull distribution function is higher.The physical meaning of the statistical parameters of the Weibull distribution function is defined to establish nonlinear prediction models of permeability and irreducible water saturation using the radial basis function(RBF)method.Correlation coefficients between the predicted values by the established models and the measured values of the tight sandstone core samples are 0.944 for permeability and 0.851 for irreducible water saturation,which highlight the effectiveness of the prediction models.

Influence of Acid Treatment on Pore Structure and Fractal Characterization of a Tight Sandstone:A Case Study from Wudun Sag,Dunhuang Basin

In this study,X-ray diffraction,N_(2)adsorption(N_(2)A),and mercury intrusion(MI)experiments were used to investigate the influence of acid treatment on pore structure and fractal characterization of tight sandstones.The results showed that acid treatment generated a certain number of ink-bottle pores in fine sandstone,aggravated the ink-bottle effect in the sandy mudstone,and transformed some smaller pores into larger ones.After the acid treatment,both the pore volume in the range of 2–11 nm and 0.271–8μm for the fine sandstone and the entire pore size range for the sandy mudstone significantly increased.The dissolution of sandstone cement causes the fine sandstone particles to fall off and fill the pores;the porosity increased at first but then decreased with acid treatment time.The fractal dimension obtained using the Frenkel-Halsey-Hill model was positively correlated with acid treatment time.However,the total fractal dimensions obtained by MI tests showed different changes with acid treatment time in fine sandstone and sandy mudstone.These results provide good guiding significance for reservoir acidification stimulation.

Integrated classification method of tight sandstone reservoir based on principal component analysise simulated annealing genetic algorithmefuzzy cluster means

In this research,an integrated classification method based on principal component analysis-simulated annealing genetic algorithm-fuzzy cluster means(PCA-SAGA-FCM)was proposed for the unsupervised classification of tight sandstone reservoirs which lack the prior information and core experiments.A variety of evaluation parameters were selected,including lithology characteristic parameters,poro-permeability quality characteristic parameters,engineering quality characteristic parameters,and pore structure characteristic parameters.The PCA was used to reduce the dimension of the evaluation pa-rameters,and the low-dimensional data was used as input.The unsupervised reservoir classification of tight sandstone reservoir was carried out by the SAGA-FCM,the characteristics of reservoir at different categories were analyzed and compared with the lithological profiles.The analysis results of numerical simulation and actual logging data show that:1)compared with FCM algorithm,SAGA-FCM has stronger stability and higher accuracy;2)the proposed method can cluster the reservoir flexibly and effectively according to the degree of membership;3)the results of reservoir integrated classification match well with the lithologic profle,which demonstrates the reliability of the classification method.

Quantitative characterization of tight gas sandstone reservoirs using seismic data via an integrated rock-physics-based framework

Seismic characterizing of tight gas sandstone (TGS) reservoirs is essential for identifying promising gas-bearing regions. However, exploring the petrophysical significance of seismic-inverted elastic properties is challenging due to the complex microstructures in TGSs. Meanwhile, interbedded structures of sandstone and mudstone intensify the difficulty in accurately extracting the crucial tight sandstone properties. An integrated rock-physics-based framework is proposed to estimate the reservoir quality of TGSs from seismic data. TGSs with complex pore structures are modeled using the double-porosity model, providing a practical tool to compute rock physics templates for reservoir parameter estimation. The VP/VS ratio is utilized to predict the cumulative thickness of the TGS reservoirs within the target range via the threshold value evaluated from wireline logs for lithology discrimination. This approach also facilitates better capturing the elastic properties of the TGSs for quantitative seismic interpretation. Total porosity is estimated from P-wave impedance using the correlation obtained based on wireline log analysis. After that, the three-dimensional rock-physics templates integrated with the estimated total porosity are constructed to interpret microfracture porosity and gas saturation from velocity ratio and bulk modulus. The integrated framework can optimally estimate the parameters dominating the reservoir quality. The results of the indicator proposed based on the obtained parameters are in good agreement with the gas productions and can be utilized to predict promising TGS reservoirs. Moreover, the results suggest that considering microfracture porosity allows a more accurate prediction of high-quality reservoirs, further validating the applicability of the proposed method in the studied region.