建筑结构用CLT板受力性能研究现状

正交胶合木(CLT)作为一种新型工程木产品,因具有良好的力学性能,被广泛应用于建筑中的墙板、楼板等构件中。通过对CLT材料的力学性能研究现状、CLT板用作结构构件(剪力墙板、楼板)性能的研究现状分析,为CLT板的大规模应用提供科学依据。

近零能耗建筑设计实践——以CLT木结构建筑为例

基于近零能耗建筑设计理念,本研究采用正交胶合木(CLT)作为主要建筑材料,完成了一项创新性的建筑设计实践,全面展示了CLT在近零能耗建筑上的应用成果,为近零能耗建筑的研究和实践提供了实际案例,并对绿色低碳建筑领域中CLT的应用进行了有意义的探索。

CLT桨敞水性能的势流预报方法

为了提高面元法对尾流收缩叶梢负载(CLT)桨敞水性能的预报精度,通过修正常规面元法中的螺旋桨计算模型、尾涡模型和网格,改进预报CLT桨敞水性能的面元法计算理论。以CLT标准桨(P1727)为研究对象,从CFD方法模拟结果中,提取不同进速下的尾涡螺距和尾涡半径,构建双尾涡模型;提出混合网格划分方法,提高计算精度和效率。将面元法预报结果与国际拖曳水池会议(ITTC)实验数据对比,结果表明,在设计进速附近,推力系数和转矩系数的相对误差在5%以内,效率的相对误差在2%以内,满足计算精度。

Bending,Compression and Bonding Performance of Cross-Laminated Timber(CLT)Made from Malaysian Fast-Growing Timbers

This study investigated the bending,compression as well as the bonding performance of CLT panels made from fast-growing timber species,i.e.,Laran(Neolamarckia cadamba)and Batai(Paraserianthes falcataria).The variables studied were timber species(Laran and Batai),layers of lamination(3-layer and 5-layer),loading direction in bending(in-plane and out-of-plane),loading direction in compression(x-,y-,and z-axis)and different treatment conditions for bonding performance test.The desired outputs of this study were bending and compression properties(strength and stiffness)as well as bonding performance(block shear strength,wood failure percentage and delamination value).The bending and compression test were conducted according to EN16351:2015 and EN408:2012,respectively.On the other hand,the bonding performance test was determined by block shear and delamination test based on EN16351:2015 and EN14374:2004,respectively.Prior to block shear test,the samples were subjected to three different treatment conditions.The results showed that CLT made from 3-layer Laran timber,loaded at out-of-plane direction exhibited the highest bending properties.Contrarily,CLT made from 5-layered Batai timber,loaded at in-plane direction showed the lowest bending properties.Laran samples for compression loaded at x-axis exhibited the best compressive properties.Generally,Laran CLT showed greater bonding performance determined by shear test compared to Batai CLT for both 3-and 5-layer panels.On the contrary,delamination results showed that Batai CLT demonstrated better bonding performance compared to Laran CLT.In terms of bonding performance measured by wood failure percentage(WFP),most samples under various treatment conditions showed WFP≥80%except for samples under wet condition with WFP≤60%.

CLT体育教学模式对高校学生认知负荷、自主学习能力影响的实证分析

近年来,合作学习教学模式(CLT)在高校教育中得到广泛应用。本文旨在通过实证研究探讨CLT教学模式对高校学生认知负荷和自主学习能力的影响,为高校教育改革和教学实践提供参考。在界定CLT教学模式、认知负荷和自主学习能力等概念基础上,通过数据分析相关高校学生的基本情况、变量维度信度和标准载荷以及二级维度效度矩阵分布情况。根据实证研究结果,提出提高学生认知负荷和自主学习能力的建议。

Experimental Investigation on the Strength and Ductility Performance of Steel-Timber-Steel Joints with Screw and Steel-Tube Fasteners

This article presents experimental results of steel-timber-steel(STS)joints loaded parallel to grain.Eight groups of specimens were designed,and tensile tests were performed.The fastener types and fastener numbers were considered to evaluate the tensile strengths and ductility performances of the STS joints.The screws with 6 mm diameter and the innovative steel-tubes with 18 mm diameter were adopted as connecting fasteners.The experimental results were discussed in terms of yielding and ultimate strengths,slip stiffness,and ductility factors.The ductility classification and failure mechanisms of each group of specimens were analyzed.It was demonstrated that the STS joint with large diameter steel-tubes showed acceptable ductility,which was close to the ductility of the STS joint with small diameter screws,thanks to the hollow structure of the steel-tube.The theoretical strengths of various failure modes for the joints with small diameter screws or large diameter steel-tubes were calculated and compared with the experimental results.The ductile performance of the STS joint was discussed by comparing the theoretical strengths of various failure modes.The effective number of the STS joint with multifasteners was also analyzed by considering the failure mechanisms in aspects of tensile strength and slip stiffness.

Determination of the Properties of Some Selected Timber Species for Structural Application

One of the alternative sustainable and green construction materials to concrete is timber. Timber is of numerous varieties, and this acts as a barrier to the extent of its usage, especially in structural application. Despite many researches on wood’s mechanical and physical properties, only a few are geared toward the structural application of wood. The present work investigated the mechanical properties of five timber species;Gmelina arborea, Tectona grandis (Teak), Terminalia superba (Afara), Ayin (Anogeissus leiocarpus), and Acacia (Robinia pseudoacacia), to determine their suitability for constructing long-span roof trusses. These are available in the South Western part of Nigeria. Their mechanical properties;bending strength, compressive strength, shear strength, tensile strength, Modulus of Elasticity (MOE), Modulus of Rupture (MOR), and density, were determined in the laboratory. The results obtained showed that all the timber types, except Terminalia superba (Afara), have higher values of mechanical properties than the values that are obtainable for classes of strength D30 to class D70 in the British Code of Practice. It means these species are of higher quality than the stipulated strength classes in the British code. The results also show that the order of relevance of the species for structural design (or work) is Acacia (Robinia pseudoacacia), Ayin (Anogeissus leiocarpus), Gmelina Arborea, and Tectona grandis (Teak). Terminalia superba (Afara) is not recommended for structural works.

An Experimental Study of Composite Columns Filled with Eucalyptus nitens Timber under Axial Compression

Eucalyptus nitens(E.nitens)has been much used for producing paper but also shows promise for structural applications.In this study,static compressive tests were undertaken to examine its suitability to be used in an innovative composite column.The composite column was comprised of a rectangular steel tube with E.nitens timber infill.The nonlinear compressive behaviour of the composite column filled with E.nitens wood for both dry and wet conditions was examined.The same tests on rectangular steel tubes and bare dry and wet E.nitens samples were also undertaken as a comparison.For samples with different conditions,the ultimate capacity was evaluated and the effect of each condition on the compressive behaviour of the composite column was clarified.The steel tubes showed greater ductile behaviour,and more ductility was found in the wet samples.The steel tubes with E.nitens timber infill samples exhibited a greater linear elastic range connected with higher maximum loads,while the bare timber samples could support only lower maximum loads.The results from this research were promising for the use of rectangular steel tubes with E.nitens timber infill in structural applications.

Verification of Depth Adjustment Factor in Eurocode 5 for Tropical Hardwood Timbers

The depth adjustment factor for bending strength stated in Eurocode 5(EC5)is only applicable to timbers having a characteristic density below 700 kg/m^(3).However,most Malaysian timbers are hardwood,some with a characteristic density reaching above 700 kg/m^(3).Therefore,the objective of this study was to examine whether the depth adjustment factor stipulated in EC5 is valid for Malaysian hardwood timbers.Six timber species were selected for this study,namely Kapur(Dryobalanops C.F.Gaertn.),Kempas(Koompassia Maingay ex Benth.),Keruing(Dipterocarpus C.F.Gaertn.),Light red meranti(Shorea Roxb.ex C.F.Gaertn.),Geronggang(Cratoxylum Blume)and Balau(Shorea Roxb.ex C.F.Gaertn.).The determination of bending strength and characteristic density was conducted according to BS EN 408:2010 and BS EN 384:2016,respectively.A graph for mean bending strength vs.(150/h)was plotted for each timber species.The power function was selected to analyze the relationship between the two variables.The power of the regression equations varied depending on the characteristic density of the timber species.For species with a characteristic density below 700 kg/m^(3),such as Kapur,Keruing,and Light red meranti,the power was between 0.16 to 0.17.In contrast,for species having a characteristic density above 700 kg/m^(3),namely Kempas and Balau,the power was higher at 0.23 and 0.24,respectively.Geronggang was an exception to this pattern.These values are close to the depth adjustment factor given in EC5,which is 0.2.Based on the results,it can be suggested that the adjustment factor of 0.2 is also applicable to Malaysian hardwood timbers with a characteristic density above 700 kg/m^(3).

In Situ Generation of Copper Nanoparticles in Heat-Treated Copper-Containing Masson’s Pine as a Preservative Process for Sawn Timber

Heat-treated wood has good dimensional stability,durability,and color,but its susceptibility to fungal growth affects its commercial value.In this study,lumber harvested from mature Masson’s pine(Pinus massoniana Lamb.)was vacuum impregnated with a basic copper salt solution(copper hydroxide,diethanolamine,and polyethylene glycol 200)prior to heat-treatment at 220℃ for 3 h.Antifungal properties,surface chemistry,crystal structure and sugar contents were tested,compared with heat treatment alone.The results showed that the samples treated by heating without copper salt treatment showed poor suppression of fungal growth,the copperimpregnated heat-treated wood suppressed(100%)the growth of Botryodiplodia theobromae Pat.,Aspergillus niger V.Tiegh.,Penicillium citrinum Thom,and Trichoderma viride Pers.The combined results of X-ray photoelectron spectroscopy,X-ray diffraction and sugars analysis suggested that fungal inhibition by the heat-treated copper-bearing Masson’s pine was mainly due to the reduction of the metal salt by PEG200 at high temperature to generate copper nanoparticles.In addition,the reduced sugar content of the treated timber,and hence the nutrient substrate for spoilage microbes,reduced in the presence of the metal salts at high-temperature.This study has demonstrated an effective method of increasing low-grade wood’s utility and commercial value.

Three-dimensional inversion of knot defects recognition in timber cutting

The comprehensive utilization of wood is the main goal of log cutting,but knot defects increase the diffi-culty of rationally optimizing cutting.Due to the lack of real shape data of knot defects in logs,it is diffi cult for detection methods to establish a correlation between signal and defect morphology.An image-processing method is proposed for knot inversion based on distance regularized level set segmentation(DRLSE)and spatial vertex clustering,and with the inversion of the defects existing relative board position in the log,an inversion model of the knot defect is established.First,the defect edges of the top and bottom images of the boards are extracted by DRLSE and ellipse fi tting,and the major axes of the ellipses made coplanar by angle correction;second,the coordinate points of the top and bottom ellipse edges are extracted to form a spatial straight line;third,to solve the intersection dispersion of spatial straight lines and the major axis plane,K-medoids clustering is used to locate the vertex.Finally,with the vertex and the large ellipse,a 3D cone model is constructed which can be used to invert the shape of knots in the board.The experiment was conducted on ten defective larch boards,and the experimental results showed that this method can accurately invert the shapes of defects in solid wood boards with the advantages of low cost and easy operation.

正交胶合木新型抗剪及抗拉连接耗能特性试验

连接节点是保证木结构抗震性能的重要因素,节点的耗能能力是衡量其是否适用于抗震区的重要指标。提出了适用于正交胶合木(cross laminated timber,CLT)结构的新型耗能抗剪连接节点和新型耗能抗拉连接节点,为研究该类连接节点的破坏模式及力学性能,开展了15组低周往复加载试验。试验结果表明,新型耗能连接节点试件延性系数(D)均大于9.0,满足欧洲规范Eurocode 8中对高延性节点D>6的要求,属于高延性范围;新型耗能连接节点工作阶段强度退化系数均低于20%,具备工程适用性;新型耗能连接节点工作阶段等效黏滞阻尼系数为12%~22%,普通商用连接节点等效黏滞阻尼系数为2.5%~15.8%,两类新型耗能连接节点具有较好的耗能能力。

基于CLT的士官语言能力训练研究

为有效提升士官学员语言能力,提高其岗位任职水平,通过分析交际教学法(communicative language teaching approach,CLT)的特点,基于CLT从更新教学理念、优化内容体系、丰富教学手段、创新教学质量管理、加强教学条件建设等方面重构课程教学设计,经过课程教学实践,验证该模式具有较好的教学效果。最后,提出在士官语言能力训练课程中应用CLT需注意的问题。

Novel Proposal of Bio-based Sewing Timber Joint:Learning from Diatoms

The twenty-first century is one of the most complex in the history of humanity,mainly due to the ecological crisis it is going through.The construction sector generates about 40%of CO2 emissions into the environment;the foregoing should motivate this sector to seek new alternatives to develop new building practices.Taking these current needs into account,this document classifies and presents a multidisciplinary solution that integrates biology,engineering and architecture to develop a new and innovative lightweight timber structure;it divides with a main structure made of timber and an innovative joint system made of bio-polymers connecting all the panels.Through the study of diatoms,it was able to analyze the bio-morphology of the structure,joints and in particular the geometry since they were the inspiration for the design of this structure that presents an innovative and novel design of structural optimization.Through parametric design and digital fabrication,it was able to create a complex geometry that obtains excellent structural behavior.This research discusses and explores how materials,geometry led to the optimization of a structure and how new structures can arise,thanks to biology new solutions can be obtained that are completely sustainable,being a clear example of how to combat the effects of the climate change and in a precise way it highlights the advantages of the bio-design in the architectural design.

正交胶合木(CLT)平压柔性制造关键技术

正交胶合木(CLT)是一种新型工程木产品,欧洲、北美已普遍将CLT用在中高层木结构建筑的楼板和墙体,但我国大幅面CLT装备一直处于空白阶段。传统的单压板压机存在压力不均匀,边缘位置压力集中等问题,造成CLT板内应力分布不均匀,影响CLT产品胶合性能和力学强度。同时,受压机尺寸和结构的限制,只能生产固定幅面的CLT板,无法生产满足剪力墙结构的大幅面板(宽2.5~3.5 m)等市场定制需求,且出材率低。

出踩与面宽方向柱头科斗栱抗震性能对比试验及数值分析

为研究加载方向对斗栱抗震性能的影响,文章基于地震作用的随机性和斗栱出踩与面宽方向的构造差异,对2个足尺柱头科斗栱分别沿出踩和面宽方向进行拟静力试验,得到斗栱的破坏模式、承载力、刚度与强度退化、耗能和变形能力。结果表明:斗栱在出踩和面宽方向分别加载时,大斗均相对平板枋滑移,馒头榫挤压剪断。出踩方向受力时单昂与桃尖梁相对滑移,面宽方向受力时整体明显转动。相比面宽方向受力的斗栱,出踩方向受力的斗栱具有更高的承载力、初始刚度和耗能能力,而变形能力较差。文章开展柱头科斗栱的数值分析,模拟结果与试验结果吻合较好,研究出踩和面宽不同加载方向、轴压荷载、木构件之间摩擦系数和木材弹性模量对其抗震性能的影响。结果表明:面宽方向是柱头科斗栱的最不利受力方向,其正负向承载力比出踩方向分别低19.21%和17.03%;轴压荷载和木构件之间摩擦系数越大,斗栱承载力越大,而木材顺纹弹性模量和横纹径向弹性模量对斗栱的初始刚度和承载力影响较小。

古建筑木构件开裂机制、评估与加固研究进展

开裂作为古建筑木构件最常见的残损类型之一,影响木构件的长期服役性能,是古建筑稳定性与安全性评估的重要考查内容。本文从古建筑木构件开裂情况、原因、影响,评估方法及修复加固等方面,系统梳理古建筑木构件开裂残损相关研究成果。分析发现我国古建筑木构件开裂的主要原因为木材干缩与受力破坏,主要类型为纵向开裂,开裂可降低木构件力学性能,也可为其他不利因素作用于木构件提供条件。目前主要通过实际试验与数值模拟评估开裂对木构件性能的影响,利用金属材料、纤维增强复合材料(fiber reinforced polymer,FRP)与高分子树脂材料对开裂木构件进行修复加固。然而,由于古建筑的特殊性与木材变异性,仍需进一步探索木构件的不同尺度开裂机制,开发适用于古建筑开裂木构件的检测、评估与加固方法,建立科学系统性的古建筑保护体系。

苹果等6种经济林不同时期果实BVOCs成分分析

为探究常见经济林树种不同时期果实在自然状态下释放植物源挥发性有机物(BVOCs)组成成分差异,并分析其香气类型,选取苹果、桃、李、梨、山楂和枣6种经济林树种为研究对象,采用动态顶空采集法收集释放的BVOCs,结合自动热脱附-气相色谱/质谱联用技术进行BVOCs分析。结果表明,6种果实膨大期和成熟期均检测出12类BVOCs,组分总数量前者(305)大于后者(275),2个时期果实释放烷烃类、烯烃类、芳香烃类、酯类和醛类BVOCs占比最大;不同时期6种果实有10种共有BVOCs为2,2,4,6,6-五甲基庚烷、正十九烷、a-柏木烯、正戊醛、庚醛、辛醛、天然壬醛、癸醛、苯乙酮和庚胺醇;苹果、桃、李和梨随着果实生长发育BVOCs成分数量减少;不同时期6种果实香韵涵盖香型有差异,并随果实生长发育,青草香、果香、檀木香、醛香和柑橘香占比明显增加。表明不同时期6种经济林植物果实释放BVOCs组成成分和相对含量差异明显,在果实成熟期,主要香气BVOCs成分相对含量较高,是果实香精开发的最佳时期。

层板销合木的界面滑移与木梁受弯性能

层板销合木(简称销合木)是一种由规格材通过销组合而成的新型结构用木材,与胶合木相比具有加工快捷、成本低且更加绿色环保等优点。为研究销合木梁的弯曲性能,设计了8组木梁的四点弯试验,试验参数包括销的种类(木销和竹销)、销间距(70、100和140 mm)和层板的数量(3、4和6层)。此外,为揭示层积材界面销连接抗剪性能对销合木梁受弯性能的贡献,开展了木销和竹销连接销合木推出试验研究。研究结果表明:与木销连接相比,竹销连接的抗滑移刚度更高且延性更好;销合木梁的受弯性能介于无销接叠合木梁和胶合木梁之间,其组合效率为0.11~0.15;随层板数量的增加,梁截面的增高使销合木梁的抗弯性能显著上升;减小销间距对销合木梁的抗弯承载力与刚度均有一定的提升作用。采用欧洲规范5中的γ法预测销合木梁的抗弯刚度时结果偏大,因此认为对销合木梁的抗弯刚度进行计算时须对销连接的滑移刚度进行折减。

基于ABAQUS的木梁损伤识别仿真研究

采用ABAQUS和压电时间反演技术对带裂缝木梁进行损伤识别数值仿真分析和试验验证研究,提出了基于时间反演聚焦信号峰值的损伤指数D1和基于时间反演重构信号和激励信号相关系数的损伤指数D2,以进行损伤识别定量评估。研究表明:聚焦信号峰值、重构信号和激励信号的相关系数均与损伤程度密切相关,两个损伤指数均随损伤程度的增加而增大;时间反演法具有良好的自适应聚焦效果,利用压电时间反演技术可有效识别木梁不同程度的裂缝损伤。研究结果可为工程实际提供参考。