Bunch-length measurement at a bunch-by-bunch rate based on time–frequency-domain joint analysis techniques and its application

This paper presents a new technique for measuring the bunch length of a high-energy electron beam at a bunch-by-bunch rate in storage rings.This technique uses the time–frequency-domain joint analysis of the bunch signal to obtain bunch-by-bunch and turn-by-turn longitudinal parameters,such as bunch length and synchronous phase.The bunch signal is obtained using a button electrode with a bandwidth of several gigahertz.The data acquisition device was a high-speed digital oscilloscope with a sampling rate of more than 10 GS/s,and the single-shot sampling data buffer covered thousands of turns.The bunch-length and synchronous phase information were extracted via offline calculations using Python scripts.The calibration coefficient of the system was determined using a commercial streak camera.Moreover,this technique was tested on two different storage rings and successfully captured various longitudinal transient processes during the harmonic cavity debugging process at the Shanghai Synchrotron Radiation Facility(SSRF),and longitudinal instabilities were observed during the single-bunch accumulation process at Hefei Light Source(HLS).For Gaussian-distribution bunches,the uncertainty of the bunch phase obtained using this technique was better than 0.2 ps,and the bunch-length uncertainty was better than 1 ps.The dynamic range exceeded 10 ms.This technology is a powerful and versatile beam diagnostic tool that can be conveniently deployed in high-energy electron storage rings.

The influences of canopy temperature measuring on the derived crop water stress index

Crop water stress index(CWSI)is widely used for efficient irrigation management.Precise canopy temperature(T_(c))measurement is necessary to derive a reliable CWSI.The objective of this research was to investigate the influences of atmospheric conditions,settled height,view angle of infrared thermography,and investigating time of temperature measuring on the performance of the CWSI.Three irrigation treatments were used to create different soil water conditions during the 2020-2021 and 2021-2022 winter wheat-growing seasons.The CWSI was calculated using the CWSI-E(an empirical approach)and CWSI-T(a theoretical approach)based on the T_(c).Weather conditions were recorded continuously throughout the experimental period.The results showed that atmospheric conditions influenced the estimation of the CWSI;when the vapor pressure deficit(VPD)was>2000 Pa,the estimated CWSI was related to soil water conditions.The height of the installed infrared thermograph influenced the T_(c)values,and the differences among the T_(c)values measured at height of 3,5,and 10 m was smaller in the afternoon than in the morning.However,the lens of the thermometer facing south recorded a higher T_(c)than those facing east or north,especially at a low height,indicating that the direction of the thermometer had a significant influence on T_(c).There was a large variation in CWSI derived at different times of the day,and the midday measurements(12:00-15:00)were the most reliable for estimating CWSI.Negative linear relationships were found between the transpiration rate and CWSI-E(R^(2)of 0.3646-0.5725)and CWSI-T(R^(2)of 0.5407-0.7213).The relations between fraction of available soil water(FASW)with CWSI-T was higher than that with CWSI-E,indicating CWSI-T was more accurate for predicting crop water status.In addition,The R^(2)between CWSI-T and FASW at 14:00 was higher than that at other times,indicating that 14:00 was the optimal time for using the CWSI for crop water status monitoring.Relative higher yield of winter wheat was obtained with average seasonal values of CWSI-E and CWSI-T around 0.23 and 0.25-0.26,respectively.The CWSI-E values were more easily influenced by meteorological factors and the timing of the measurements,and using the theoretical approach to derive the CWSI was recommended for precise irrigation water management.

The burden of upper motor neuron involvement is correlated with the bilateral limb involvement interval in patients with amyotrophic lateral sclerosis:a retrospective observational study

Amyotrophic lateral sclerosis is a rare neurodegenerative disease characterized by the involvement of both upper and lower motor neurons.Early bilateral limb involvement significantly affects patients'daily lives and may lead them to be confined to bed.However,the effect of upper and lower motor neuron impairment and other risk factors on bilateral limb involvement is unclear.To address this issue,we retrospectively collected data from 586 amyotrophic lateral sclerosis patients with limb onset diagnosed at Peking University Third Hospital between January 2020 and May 2022.A univariate analysis revealed no significant differences in the time intervals of spread in different directions between individuals with upper motor neuron-dominant amyotrophic lateral sclerosis and those with classic amyotrophic lateral sclerosis.We used causal directed acyclic graphs for risk factor determination and Cox proportional hazards models to investigate the association between the duration of bilateral limb involvement and clinical baseline characteristics in amyotrophic lateral sclerosis patients.Multiple factor analyses revealed that higher upper motor neuron scores(hazard ratio[HR]=1.05,95%confidence interval[CI]=1.01–1.09,P=0.018),onset in the left limb(HR=0.72,95%CI=0.58–0.89,P=0.002),and a horizontal pattern of progression(HR=0.46,95%CI=0.37–0.58,P<0.001)were risk factors for a shorter interval until bilateral limb involvement.The results demonstrated that a greater degree of upper motor neuron involvement might cause contralateral limb involvement to progress more quickly in limb-onset amyotrophic lateral sclerosis patients.These findings may improve the management of amyotrophic lateral sclerosis patients with limb onset and the prediction of patient prognosis.

ENTROPY MEASUREMENT OF INTERVAL GREY SEQUENCE AND ITS APPLICATION

The uncertainty measurement method for grey information theory and the metric formula are established, and its application in decision-making is researched. The entropy measurement of grey sequence based on the limited interval grey number sequence is different from the Shannon probability entropy. The measurement formula of grey number and its properties are studied, such as the invariance, the applicable conditions, and the grey entropy of union and intersection of two grey numbers, and so on. Finally, the algorithm for interval grey sequence and an example are given to show the effectiveness of the method.

Time-varying confidence interval forecasting of travel time for urban arterials using ARIMA-GARCH model

To improve the forecasting reliability of travel time, the time-varying confidence interval of travel time on arterials is forecasted using an autoregressive integrated moving average and generalized autoregressive conditional heteroskedasticity （ARIMA-GARCH） model. In which, the ARIMA model is used as the mean equation of the GARCH model to model the travel time levels and the GARCH model is used to model the conditional variances of travel time. The proposed method is validated and evaluated using actual traffic flow data collected from the traffic monitoring system of Kunshan city. The evaluation results show that, compared with the conventional ARIMA model, the proposed model cannot significantly improve the forecasting performance of travel time levels but has advantage in travel time volatility forecasting. The proposed model can well capture the travel time heteroskedasticity and forecast the time-varying confidence intervals of travel time which can better reflect the volatility of observed travel times than the fixed confidence interval provided by the ARIMA model.

Traffic Incident Management Performance Measures: Ranking Agencies on Roadway Clearance Time

This study develops a procedure to rank agencies based on their incident responses using roadway clearance times for crashes. This analysis is not intended to grade agencies but to assist in identifying agencies requiring more training or resources for incident management. Previous NCHRP reports discussed usage of different factors including incident severity, roadway characteristics, number of lanes involved and time of incident separately for estimating the performance. However, it does not tell us how to incorporate all the factors at the same time. Thus, this study aims to account for multiple factors to ensure fair comparisons. This study used 149,174 crashes from Iowa that occurred from 2018 to 2021. A Tobit regression model was used to find the effect of different variables on roadway clearance time. Variables that cannot be controlled directly by agencies such as crash severity, roadway type, weather conditions, lighting conditions, etc., were included in the analysis as it helps to reduce bias in the ranking procedure. Then clearance time of each crash is normalized into a base condition using the regression coefficients. The normalization makes the process more efficient as the effect of uncontrollable factors has already been mitigated. Finally, the agencies were ranked by their average normalized roadway clearance time. This ranking process allows agencies to track their performance of previous crashes, can be used in identifying low performing agencies that could use additional resources and training, and can be used to identify high performing agencies to recognize for their efforts and performance.

Static softening behaviors of 7055 alloy during the interval time of multi-pass hot compression

Multipass plain strain compression test of 7055 alloy was carried out on Gleeble 1500D thermomechanical simulator to study the effect of interval time on static softening behavior between two passes. Microstructural features of the alloy deformed with delay times varying from 0 to 180 s after achieving a reduction of ,-~52 % in the 13 stages was investigated through TEM and EBSD observations. The 14th pass of peak stresses after different delay times were gained. The peak stress decreases with the interstage delay time increasing, but the decreasing trend is gradually slower. Static recovery, metadynamic recrystallization, and/or static recrystallization can be found in the alloy during two passes. The recovery and recrystallization degree increases with longer interstage delay time. The static recovery is the main softening mechanism. Subgrain coalescence and subgrain growth together with particle-stimulated nucleation are the main nucleation mechanisms for static recrystallization.

Association between tear film break up time and blink interval in visual display terminal users

AIM：To investigate the association between tear film break up time（TBUT）and blinking interval in visual display terminal（VDT）users.METHODS：Nine hundred and thirty VDT users underwent dry eye testing,and functional visual acuity（FVA）test.The blinking interval during FVA was compared with TBUT.Subjects with longer blinking interval than TBUT were considered as unstable tear film.Logistic regression analysis revealed the risk factors for unstable tear group.RESULTS：Among 930 workers,858 subjects（92.3%）participated in this study.Almost 80% of the subjects were categorized into the unstable tear group.Unstable tear group has significantly lower Schirmer values and TBUT（17.5±11.6 vs 21.1±11.5 mm,3.7±2.6 vs 5.7±2.7s,both P〈0.001）.There were no significant differences in epithelial staining or severity of symptoms.Logistic regression showed that over 40y was a risk for being unstable tear group[odds ratio（OR）=1.53;95%confidence interval（CI）=1.06-2.20].Contact lens use was protective factor for being in the unstable tear group（OR=0.37;95%CI=0.26-0.53）.CONCLUSION：Subjects with shorter TBUT than blinking interval are prevalent among VDT users.Subjects over the age of 40 shows an increased risk for unstable tear film.

THE INFLUENCE OF ELECTRO-ACUPUNCTURE AT NEIGUAN AND FIVE SHU POINTS OF TWELVE REGULAR MERIDIANS AT DIFFERENT TIME ON SYSTOLIC TIME INTERVAL OF NORMAL YOUNG ADULTS

The influence of electro-acupuncture at Neiguan (PC 6)and five shu points of twelve regular meridians at different time on systolic time interval (ST I) of normal young adultswere studied with 6×6 Latin square design in this work.In 12 groups according to 12 regular merldlans,the STIs were measured respectively just before and after electro-acupuncture on Neiguan andfive shu points at 00:00,04:00,08:00,12:00,16:00 and 20:00 of a day.It was found thatexcept the PEPI and PEPI/LVETI ratio among Shenmen(HT 7),Shaochong(HT 9)and Neiguan,Guanchong(TE)and Yemen(TE 2)points,the effects of electro-acupuncture at Neiguan pointand five shu points of twelve regular meridians on the indices of STI of normal young adults wereshowing no slgnificant differences.There also was no difference in different sex.But the indices ofSTI were changed when electroacupuncture on the different points of different meridians at differenttime.

Influences of different time intervals between loop electrosurgical excision and abdominal hysterectomy or radical hysterectomy on postoperative complications: a retrospective analysis

Objective： To study the influences of different time intervals between loop electrosurgical excision （LEEP） and abdominal hysterectomy or radical hysterectomy on postoperative complications. Methods： Sixty-eight patients, who received subsequent abdominal hysterectomy or radical hysterectomy after LEEP due to C1N III and cervical cancer （IA1, IA2 and IB1）, were included in the present study. The hospital and clinic records of these patients were reviewed. The patients were divided into three groups according to the time intervals between LEEP and hysterectomy or radical hysterectomy： group l（within 48 h）, group 2 （between 48 h to 6 weeks）, and group 3（〉 6 weeks ）.Results： General characteristics of patients, including the mean age, delivery history, BMI, menopausal status, clinical stage and HPV infection, were comparable between patients of different groups. There were no significant differences in the mean transfusion amount, posthysterectomy hospital stay or operation time between different groups. The frequencies and spectrum of complications were not significantly affected by the time interval between LEEP and hysterectomy or radical hysterectomy. Conclusion： It is concluded that whenever the LEEP is done, the operation including hysterectomy or radical hysterectomy can be conducted at any time as it is necessary for the patients.

A time-dependent measuring system for welding deformation

In this paper the establishment and application of a time dependent measuring system for welding deformation are presented which is established with high quality sensors shielded from strong welding interference. By using this system, vertical and horizontal displacements of the high temperature area are surveyed at the same time. And this system is also used for monitoring and controlling the deformation of real welded structures.

Integrated method for measuring distance and time difference between small satellites

The advancement of small satellites is promoting the development of distributed satellite systems,and for the latter,it is essential to coordinate the spatial and temporal relations between mutually visible satellites.By now,dual one-way ranging(DOWR)and two-way time transfer(TWTT)are generally integrated in the same software and hardware system to meet the limitations of small satellites in terms of size,weight and power(SWaP)consumption.However,studies show that pseudo-noise regenerative ranging(PNRR)performs better than DOWR if some advanced implementation technologies are employed.Besides,PNRR has no requirement on time synchronization.To apply PNRR to small satellites,and meanwhile,meet the demand for time difference measurement,we propose the round-way time difference measurement,which can be combined with PNRR to form a new integrated system without exceeding the limits of SWaP.The new integrated system can provide distributed small satellite systems with on-orbit high-accuracy and high-precision distance measurement and time difference measurement in real time.Experimental results show that the precision of ranging is about 1.94 cm,and that of time difference measurement is about 78.4 ps,at the signal to noise ratio of 80 dBHz.

Diurnal Variation of Soil CO2 Efflux and Its Optimal Measuring Time-window of Temperate Meadow Steppes in Western Songnen Plain, China

In order to study the diurnal variation of soil CO2 effiux from temperate meadow steppes in Northeast China, and determine the best time for observation, a field experiment was conducted with a LI-6400 soil CO2 flux system under five typical plant communi- ties （Suaeda glauca （Sg）, Chloris virgata （Cv）, Puecinellia distans （Pd）, Leymus chinensis （Lc） and Phragmites australis （Pa）） and an alkali-spot land （As） at the meadow steppe of western Songnen Plain. The results showed that the diurnal variation of soil CO2 effiux exhibited a single peak curve in the growing season. Diurnal maximum soil respiration （Rs） often appeared between 1 1：00 and 13：00, while the minimum occurred at 21：00-23：00 or before dawn. Air temperature near the soil surface （Ta） and soil temperature at 10 cm depth （Tlo） exerted dominant control on the diurnal variations of soil respiration. The time-windows 7：00-9：00 could be used as the optimal measuring time to represent the daily mean soil CO2 effiux at the Cv, Pd, Lc and Pa sites. The daily mean soil CO2 effiux was close to the soil COz effiux from 15：00 to 17：00 and the mean of 2 individual soil CO2 effiux from 15：00 to 19：00 at the As and Sg sites, respectively. During nocturnal hours, negative soil CO2 fluxes （CO2 downwards into the soil） were frequently observed at the As and Sg sites, the magnitude of the negative CO2 fluxes were 0.10-1.55 gmol/（m2.s） and 0.10-0.69 gmol/（m2.s）at the two sites. The results im- plied that alkaline soils could absorb CO2 under natural condition, which might have significant implications to the global carbon budget accounting.

Variational Inference Based Kernel Dynamic Bayesian Networks for Construction of Prediction Intervals for Industrial Time Series With Incomplete Input

Prediction intervals(PIs)for industrial time series can provide useful guidance for workers.Given that the failure of industrial sensors may cause the missing point in inputs,the existing kernel dynamic Bayesian networks(KDBN),serving as an effective method for PIs construction,suffer from high computational load using the stochastic algorithm for inference.This study proposes a variational inference method for the KDBN for the purpose of fast inference,which avoids the timeconsuming stochastic sampling.The proposed algorithm contains two stages.The first stage involves the inference of the missing inputs by using a local linearization based variational inference,and based on the computed posterior distributions over the missing inputs the second stage sees a Gaussian approximation for probability over the nodes in future time slices.To verify the effectiveness of the proposed method,a synthetic dataset and a practical dataset of generation flow of blast furnace gas(BFG)are employed with different ratios of missing inputs.The experimental results indicate that the proposed method can provide reliable PIs for the generation flow of BFG and it exhibits shorter computing time than the stochastic based one.

Vitreoretinal surgeons'experience and time interval from pars-plana vitrectomy to cataract extraction

AIM:To identify the association of the vitreoretinal surgeons'experience with the time interval between parsplana vitrectomy(PPV)and cataract extraction(CE).METHODS:Eyes with prior PPV and following CE were included in this retrospective cohort study.The years of practice and the annual case volume were used to describe the surgeons'experience.Multivariable linear regression analysis was used to investigate the relationship between surgeons'experience and the time interval adjusted for the patients age,gender,intraocular tamponade,and case complexity.RESULTS:Of 132430 eyes,1445 eyes were included in this study.In multivariable linear regression analysis,cases performed by surgeons with>20 practice years had longer time intervals compared with surgeons with<10 practice years after adjusted for other variables(β=0.329,95%CI:0.113 to 0.549,P=0.003).No difference in time interval was detected for comparing the lowest with the highest volume groups(β=0.089,95%CI:-0.164 to 0.343,P=0.343).The surgeons'practice years were not directly with the volume.For complicated surgery,the higherpractice-year surgeons had longer time interval than lowerpractice-year surgeons.CONCLUSION:The time intervals from PPV to CE is longer in higher-practice-year surgeons.The surgeons'practice years may have a greater effect on the time interval than annual case volume in high-complexity cases.Matching the complexity of vitreoretinal diseases with the surgeons'practice year should be considered.

Time variant multi-objective linear fractional interval-valued transportation problem

This paper studies a time-variant multi-objective linear fractional transportation problem. In reality, transported goods should reach in destinations within a specific time. Considering the importance of time, a time-variant multi-objective linear fractional transportation problem is formulated here. We take into account the parameters as cost, supply and demand are interval valued that involved in the proposed model, so we treat the model as a multi-objective linear fractional interval transportation problem. To solve the formulated model, we first convert it into a deterministic form using a new transformation technique and then apply fuzzy programming to solve it. The applicability of our proposed method is shown by considering two numerical examples. At last, conclusions and future research directions regarding our study is included.

Study on conveyor natural frequency and time intervalfor switching off resistances

A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.

Influence of sampling on three-dimensional surface shape measurement

In order to accurately measure an object’s three-dimensional surface shape,the influence of sampling on it was studied.First,on the basis of deriving spectra expressions through the Fourier transform,the generation of CCD pixels was analyzed,and its expression was given.Then,based on the discrete expression of deformation fringes obtained after sampling,its Fourier spectrum expression was derived,resulting in an infinitely repeated"spectra island"in the frequency domain.Finally,on the basis of using a low-pass filter to remove high-order harmonic components and retaining only one fundamental frequency component,the inverse Fourier transform was used to reconstruct the signal strength.A method of reducing the sampling interval,i.e.,reducing the number of sampling points per fringe,was proposed to increase the ratio between the sampling frequency and the fundamental frequency of the grating.This was done to reconstruct the object’s surface shape more accurately under the condition of m>4.The basic principle was verified through simulation and experiment.In the simulation,the sampling intervals were 8 pixels,4 pixels,2 pixels,and 1 pixel,the maximum absolute error values obtained in the last three situations were 88.80%,38.38%,and 31.50%in the first situation,respectively,and the corresponding average absolute error values are 71.84%,43.27%,and 32.26%.It is demonstrated that the smaller the sampling interval,the better the recovery effect.Taking the same four sampling intervals in the experiment as in the simulation can also lead to the same conclusions.The simulated and experimental results show that reducing the sampling interval can improve the accuracy of object surface shape measurement and achieve better reconstruction results.

A real-time performance improvement method for composite time scale

The composite time scale(CTS)provides a stable,accurate,and reliable time scale for modern society.The improvement of CTS’s real-time performance will improve its stability,which strengths related applications’performance.Aiming at this goal,a method achieved by determining the optimal calculation interval and accelerating adjustment stage is proposed in this paper.The determinants of the CTS’s calculation interval(characteristics of the clock ensemble,the measurement noise,the time and frequency synchronization system’s noise and the auxiliary output generator noise floor)are studied and the optimal calculation interval is obtained.We also investigate the effect of ensemble algorithm’s initial parameters on the CTS’s adjustment stage.A strategy to get the reasonable initial parameters of ensemble algorithm is designed.The results show that the adjustment stage can be finished rapidly or even can be shorten to zero with reasonable initial parameters.On this basis,we experimentally generate a distributed CTS with a calculation interval of 500 s and its stability outperforms those of the member clocks when the averaging time is longer than1700 s.The experimental result proves that the CTS’s real-time performance is significantly improved.