Mechanism Study on the Effect of Retarder on Polyurethane Setting Time Based on Molecular Simulation

This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setting time of polyurethane was further investigated using molecular dynamics simulations.Fourier transform infrared spectroscopy was also employed to systematically study the physical and chemical interactions between phosphate esters and polyurethane materials.The results demonstrate that a 1%concentration of phosphate ester provides the most effective retarding effect with minimal impact on the strength of polyurethane.When phosphate ester is added to the B component of the two-component polyurethane system,its interaction energy with component A decreases,as do the diffusion coefficient and aggregation degree of component B on the surface of component A.This reduction in interaction slows the setting time.Additionally,the addition of phosphate ester to polyurethane leads to the disappearance or weakening of functional groups,indicating competitive interactions within the phosphate ester components that inhibit the reaction rate.

Impact of time between meniscal injury and isolated meniscus repair on post-operative outcomes:A systematic review

BACKGROUND Meniscal tears are one of the most common knee injuries.After the diagnosis of a meniscal tear has been made,there are several factors physicians use to guide clinical decision-making.The influence of time between injury and isolated meniscus repair on patient outcomes is not well described.Assessing this relationship is important as it may influence clinical decision-making and can add to the preoperative patient education process.We hypothesized that increasing the time from injury to meniscus surgery would worsen postoperative outcomes.AIM To investigate the current literature for data on the relationship between time between meniscus injury and repair on patient outcomes.METHODS PubMed,Academic Search Complete,MEDLINE,CINAHL,and SPORTDiscus were searched for studies published between January 1,1995 and July 13,2023 on isolated meniscus repair.Exclusion criteria included concomitant ligament surgery,incomplete outcomes or time to surgery data,and meniscectomies.Patient demographics,time to injury,and postoperative outcomes from each study were abstracted and analyzed.RESULTS Five studies met all inclusion and exclusion criteria.There were 204(121 male,83 female)patients included.Three of five(60%)studies determined that time between injury and surgery was not statistically significant for postoperative Lysholm scores(P=0.62),Tegner scores(P=0.46),failure rate(P=0.45,P=0.86),and International Knee Documentation Committee scores(P=0.65).Two of five(40%)studies found a statistically significant increase in Lysholm scores with shorter time to surgery(P=0.03)and a statistically significant association between progression of medial meniscus extrusion ratio(P=0.01)and increasing time to surgery.CONCLUSION Our results do not support the hypothesis that increased time from injury to isolated meniscus surgery worsens postoperative outcomes.Decision-making primarily based on injury interval is thus not recommended.

Storage time affects the level and diagnostic efficacy of plasma biomarkers for neurodegenerative diseases

Several promising plasma biomarker proteins,such as amyloid-β(Aβ),tau,neurofilament light chain,and glial fibrillary acidic protein,are widely used for the diagnosis of neurodegenerative diseases.However,little is known about the long-term stability of these biomarker proteins in plasma samples stored at-80°C.We aimed to explore how storage time would affect the diagnostic accuracy of these biomarkers using a large cohort.Plasma samples from 229 cognitively unimpaired individuals,encompassing healthy controls and those experiencing subjective cognitive decline,as well as 99 patients with cognitive impairment,comprising those with mild cognitive impairment and dementia,were acquired from the Sino Longitudinal Study on Cognitive Decline project.These samples were stored at-80°C for up to 6 years before being used in this study.Our results showed that plasma levels of Aβ42,Aβ40,neurofilament light chain,and glial fibrillary acidic protein were not significantly correlated with sample storage time.However,the level of total tau showed a negative correlation with sample storage time.Notably,in individuals without cognitive impairment,plasma levels of total protein and tau phosphorylated protein threonine 181(p-tau181)also showed a negative correlation with sample storage time.This was not observed in individuals with cognitive impairment.Consequently,we speculate that the diagnostic accuracy of plasma p-tau181 and the p-tau181 to total tau ratio may be influenced by sample storage time.Therefore,caution is advised when using these plasma biomarkers for the identification of neurodegenerative diseases,such as Alzheimer's disease.Furthermore,in cohort studies,it is important to consider the impact of storage time on the overall results.

Identifying the Impact of Preconstruction Elements on Project Time Variances

Working toward an efficient duration and timeline for the preconstruction phase should be one of the main objectives for project owners.Failing to plan for and coordinate preconstruction decisions in order to control preconstruction duration and manage time variances can lead to financial insecurities,incomplete contract documents,permitting issues,and unrealistic schedules and resource allocation during this phase.To minimize time variances and ensure a productive decision-making process,project owners should be familiar with critical elements in a project that cause variances in the preconstruction phase timeline.In this study,the impacts of eleven critical preconstruction elements on time variances were analyzed.These eleven preconstruction elements are considered critical in how they impact time variances during the preconstruction phase.They were determined to be critical based either on significantly impacting time variance during the preconstruction phase or believed to be critical from findings from previous studies,however,the findings from this study showed no significant impact on the time variances.In most previous studies focusing on the elements impacting project schedules,data were collected by surveying construction professionals.In this study,objective and quantitative data related to project preconstruction elements were used as opposed to self-reported data.Using the results of this study,project owners and stakeholders will be able to evaluate the critical preconstruction elements impacting the timing of their projects and prioritize decisions related to the critical elements early on during the preconstruction phase.

“Culture time”板块教学中跨文化意识培养的策略

在新课程改革的大环境中,文化意识成为英语学科核心素养的重要组成部分。语言是文化的载体,语言与文化是相互依赖、相互影响、相互制约的。学习语言的过程也是学习文化的过程。文章主要结合译林版英语五、六年级教材中的Culture time板块的教学案例,探讨如何在英语课堂教学实践中丰富文化素材、发掘其中的文化元素和领略中西方文化异同,以帮助学生有效学习文化知识,拓宽文化视野,培养文化意识。

Effect of pouring time on microstructure and mechanical properties of centrifugal cast Ti-46Al alloy tubes

The grain size of TiAl alloy castings prepared by traditional casting process is coarse,thus showing poor mechanical properties.In this study,a new type of high performance Ti-46Al alloy tube prepared by vacuum centrifugal casting technology was introduced.This research comprehensively examined the influence of pouring time on the microstructure and mechanical performance of the castings,employing both experimental approaches and ProCast simulation methodologies.The findings indicate that prolonging the pouring time facilitates a microstructural evolution from coarse columnar grains to refined equiaxed grains.Under the condition of pouring temperature of 1,600℃,rotation speed of 800 r·min^(-1) and pouring time of 6 s,the tensile strength of Ti-46Al alloy at room temperature reaches 650 MPa,and the tensile strength at 800℃ reaches 705 MPa,which is significantly higher than that of traditional as-cast Ti-Al alloy.

Three-dimensional line-of-sight-angle-constrained leader-following cooperative interception guidance law with prespecified impact time

To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.

基于TimeGAN-Stacking的风电机组变桨系统故障诊断方法

风电机组变桨系统的少量不均衡故障样本难以训练基于数据驱动的故障诊断模型,导致监测系统常常漏报或误报故障。针对上述问题,提出一种基于TimeGAN-Stacking的风电机组变桨系统故障诊断方法。在数据层面,由于原始样本类别不平衡,基于时序生成对抗网络(TimeGAN)跟踪风电机组运行数据逐步概率分布的动态变化特征,同时优化生成样本的全局分布与局部分布,有效平衡且扩容风电机组多种故障综合样本集;在模型层面,建立Stacking集成模型,融合多个故障诊断器的优势,进一步提高故障诊断能力。最后,基于实际风场数据对所提方法进行测试,结果表明,所提出的TimeGAN-Stacking故障识别方法可有效诊断4种变桨故障。

TSLV:Time-Slice-Based Location Verification for VANET

Position-spoofing-based attacks seriously threaten the security of Vehicular Ad Hoc Network(VANET).An effective solution to detect position spoofing is location verification.However,since vehicles move fast and the topology changes quickly in VANET,the static location verification method in Wireless Sensor Network(WSN) is not suitable for VANET.Taking into account the dynamic changing topology of VANET and collusion,we propose a Time-Slice-based Location Verification scheme,named TSLV,to resist position spoofing in VANET.Specifically,TSLV transforms the dynamic topology into static topology by time slice and each time slice corresponds to a verification process.The verifier can implement location verification for the corresponding prover.During the verification process,the verifier first filters out vehicles which provide unreasonably claimed locations,and then uses the Mean Square Error(MSE)-based cluster approach to separate the consistent vehicles by time slice,and uses the consistent set for its verification.In addition,security analysis and simulation show that TSLV can defend against the collusion attack effectively.

Generator Unit Fault Diagnosis Using the Frequency Slice Wavelet Transform Time-frequency Analysis Method

为了提取有效的故障特征，提出了基于频率切片小波变换时频分解的故障特征分离提取方法。先对信号进行频率切片小波变换获取其时频分布，然后根据信号的能量分布特点选择时频区域，再以较高的时频分辨率对选择的时频区域进一步细化分析，以突出隐含在信号中的时频特征，在此基础上分割出含有故障特征时频区域，再通过滤波和逆变换重构分离出有效的故障特征。仿真实验和工程应用表明，这种方法可从噪声信号中分离出有效的特征分量，在发电机组故障特征提取时取得了较好的效果。

4种植物源性成分多重real-time PCR检测方法的建立及其在食用淀粉中的应用

建立一种可同时快速检测红薯、木薯、马铃薯、玉米源性成分的多重实时聚合酶链式反应(real-time polymerase chain reaction,real-time PCR)方法。分别以红薯g3pdh基因、木薯g3pdh基因、马铃薯UGPase基因、玉米zSSIIb基因为靶基因设计特异性引物和TaqMan探针,以18S rRNA基因为内参基因,建立多重real-time PCR方法,开展方法学验证,并对不同掺入比例模拟样品和实际淀粉样品进行检测。结果显示,该方法具有高通量、特异性强、灵敏度高等优点。与15种非目标源性均无交叉反应;对目标DNA的检测灵敏度可达到3×10^(-3) ng/μL,且具有良好的线性关系和扩增效率;对淀粉样品的检出限可达0.1%,对50份实际样品进行检测,结果与参比方法一致,说明建立的多重real-time PCR法可用于食用淀粉种类掺假鉴别检测。

Time Slice Analysis Method Based on OTCA Used in fMRI Weak Signal Function Extraction

The original temporal clustering analysis (OTCA) is an effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown, but its deficiency of sensitivity is exposed in processing brain activation signal which is relatively weak. The time slice analysis method based on OTCA is proposed considering the weakness of the functional magnetic resonance imaging (fMRI) signal of the rat model. By dividing the stimulation period into several time slices and analyzing each slice to detect the activated pixels respectively after the background removal, the sensitivity is significantly improved. The inhibitory response in the hypothalamus after glucose loading is detected successfully with this method in the experiment on rat. Combined with the OTCA method, the time slice analysis method based on OTCA is effective on detecting when, where and which type of response will happen after stimulation, even if the fMRI signal is weak.

ICON/MIGHTI与TIMED/SABER探测温度数据的对比

ICON卫星为临近空间环境特性研究、建模和预报提供了新数据.通过对ICON/MIGHTI与TIMED/SABER在90~105 km高度探测温度数据的比较,计算两者的年平均温度偏差和均方根误差,同时分析月平均温度偏差在不同月份中随高度和纬度的分布情况,为MIGHTI和SABER温度探测数据在临近空间大气建模和预报应用提供参考依据.结果表明,MIGHTI和SABER的温度垂直廓线变化趋势基本吻合,数值上有所差异.在12°S-42°N范围内,MIGHTI探测温度与SABER相比,在90~93 km时偏低,偏差最大值约2.5 K,在93~105 km偏高,偏差的绝对值最大约10 K.在不同季节,白天的温度偏差通常高于夜晚.SABER和MIGHTI的月平均温度偏差随季节和纬度的变化显著,夏季时的月平均温度偏差最大,且温度的均方根误差最大.

Partition-Time Masking:一种唇语识别数据增强方法

提出了一种唇语识别数据增强方法Partition-Time Masking。该方法直接作用于输入数据,通过将输入划分为多个子序列再分别进行Mask操作最后再将各子序列按序拼接,使得模型能对部分帧缺失的输入具有更强的鲁棒性,从而增强泛化能力。实验前根据划分的子序列数目与掩码值来源不同而设计了5种增强策略,并与唇语识别研究中最重要的数据增强方法Time Masking进行了对比实验。实验在LRW数据集和LRW1000数据集上进行,实验结果表明Partition-Time Masking方法对模型性能提升的效果要优于Time Masking方法,其中子序列数目为3、掩码值选择各子序列平均帧时为最优策略,该策略使得目前最佳的唇语识别模型DC-TCN的性能从89.6%提高到90.0%。

Measuring Global Warming: Global and Hemisphere Mean Temperature Anomalies Predictions Using Sliced Functional Time Series (SFTS) Model

In this study, the sliced functional time series (SFTS) model is applied to the Global, Northern and Southern temperature anomalies. We obtained the combined land-surface air and sea-surface water temperature from Goddard Institute for Space Studies (GISS), NASA. The data are available for Global mean, Northern Hemisphere mean and Southern Hemisphere means (monthly, quarterly and annual) since 1880 to present (updated through March 2019). We analyze the global surface temperature change, compare alternative analyses, and address the questions about the reality of global warming. We detected the outliers during the last century not only in global temperature series but also in northern and southern hemisphere series. The forecasts for the next twenty years are obtained using SFTS models. These forecasts are compared with ARIMA, Random Walk with drift and Exponential Smoothing State Space (ETS) models. The comparison is made on the basis of root mean square error (RMSE), mean absolute percentage error (MAPE) and the length of prediction intervals.

TimeGAN-Informer长时机场能见度预测

能见度的预测对机场的业务决策、保障飞机的安全起降具有重要的意义。针对现有能见度预测模型预测时间较短的问题,提出一种基于TimeGAN Informer(Time Generative Adversarial Network-Informer)的机场能见度预测方法。利用2018—2022年气象和污染物数据,通过相关系数法和递归特征消除法提取出能见度的主要影响因素,使用TimeGAN时间序列生成对抗网络对数据进行扩充,并将Informer长时间序列预测模型应用于能见度预测。结果显示:当预测步长为1 d、2 d、3 d时,TimeGAN Informer的绝对误差(Mean Absolute Error,MAE)分别为2.42、3.13、3.57,比Informer分别降低了0.29、0.27、0.28,比长短时记忆网络(Long Short-Term Memory,LSTM)分别降低了0.28、0.49、0.63;均方根误差(Root Mean Square Error,RMSE)分别为3.03、3.7、4.09,比Informer分别降低了0.38、0.22、0.24,比长短时记忆网络(LSTM)分别降低了0.3、0.5、1.04;百分误差小于30%的分别占测试样本集的78.07%、70.68%、63.84%。尽管随着步长的增加预测效果变差,但在预测步长为3 d时,多数样本的预测误差仍小于30%,实现了对机场区域较为准确的长时能见度预测。

基于TimeGAN数据增强的复杂过程故障分类方法

针对传统基于重构的故障分类方法在故障样本稀疏或失衡情况下效果不佳、故障子空间区分能力弱的问题,提出基于TimeGAN数据增强的复杂过程故障分类方法.针对小子样故障,使用TimeGAN对历史故障数据进行数据增强,生成与历史数据分布相似的虚拟故障样本;采用马氏距离评估虚拟样本的质量,剔除不可信样本,构造平衡的故障样本集.将故障样本映射到高维核空间,并在核空间中提取故障子空间.设计故障分类策略并定义4种故障分类性能评估指标以定量衡量算法的分类性能.Tennessee Eastman应用结果表明,所提数据增强方法可以有效扩充故障样本,进而提高故障重构率.与WGAN-GP和SMOTE方法进行对比,发现基于TimeGAN数据增强的故障分类方法具有更好的分类性能.

Brain Time Stack图像融合技术在CT中的应用

目的:分析Brain Time Stack图像融合技术在CT中的应用。方法:选取2021年3月—2022年9月衡水市第四人民医院收治的50例CT检查患者作为研究对象。所有患者进行CT检查并进行Brain Time Stack后处理。比较四组不同部位CT值、标准差(SD)、信噪比(SNR)。比较四组图像主观质量评分。分析不同部位CT值、SD、SNR与图像主观质量评分的相关性。结果:B组的延髓、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉CT值明显低于A组;C组的延髓、脑室、额叶白质、小脑内侧、小脑外侧、颞肌肌肉CT值高于A组;D组延髓、额叶灰质、颞肌肌肉CT值明显低于A组,脑室、额叶白质、小脑外侧CT值明显高于A组;C组延髓、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉CT值明显高于B组;D组延髓、脑室、额叶白质、小脑内侧、小脑外侧、颞肌肌肉CT值明显高于B组;D组延髓、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉CT值明显低于C组;D组脑室CT值明显高于C组,差异有统计学意义(P<0.05)。B组、C组、D组延髓、脑室、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉SD值明显低于A组;C组延髓、脑室、额叶白质、小脑内侧、小脑外侧、颞肌肌肉SD值均明显高于B组;C组额叶灰质SD明显低于B组;D组延髓、脑室、额叶灰质、额叶白质、小脑内侧、小脑外侧、肌肉SD均明显低于B组、C组,差异有统计学意义(P<0.05)。B组、C组、D组延髓、脑室、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉SNR均明显高于A组;C组、D组延髓、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉SNR值明显高于B组;C组、D组脑室SNR明显低于B组;D组延髓、脑室、额叶灰质、额叶白质、小脑内侧、小脑外侧、颞肌肌肉SNR明显高于C组,差异有统计学意义(P<0.05)。D组图像主观质量评分最高,差异有统计学意义(P<0.05)。延髓、脑室、额叶灰质、额叶白质、小脑内侧、小脑外侧及颞肌肌肉SD与主观质量评分呈明显负相关,SNR与主观质量评分间呈明显正相关,差异有统计学意义(P<0.05)。结论:利用Brain Time Stack图像融合技术对头部CT扫描检查图像处理,动脉期结合前一期及后一期的图像数据在处理后具有更好的质量和更少的噪音。

Association of daily sitting time and leisure-time physical activity with body fat among U.S.adults

Background:Prolonged sitting and reduced physical activity lead to low energy expenditures.However,little is known about the joint impact of daily sitting time and physical activity on body fat distribution.We investigated the independent and joint associations of daily sitting time and physical activity with body fat among adults.Methods:This was a cross-sectional analysis of U.S.nationally representative data from the National Health and Nutrition Examination Survey2011-2018 among adults aged 20 years or older.Daily sitting time and leisure-time physical activity(LTPA)were self-reported using the Global Physical Activity Questionnaire.Body fat(total and trunk fat percentage)was determined via dual X-ray absorptiometry.Results:Among 10,808 adults,about 54.6%spent 6 h/day or more sitting;more than one-half reported no LTPA(inactive)or less than 150 min/week LTPA(insufficiently active)with only 43.3%reported 150 min/week or more LTPA(active)in the past week.After fully adjusting for sociodemographic data,lifestyle behaviors,and chronic conditions,prolonged sitting time and low levels of LTPA were associated with higher total and trunk fat percentages in both sexes.When stratifying by LTPA,the association between daily sitting time and body fat appeared to be stronger in those who were inactive/insuufficiently active.In the joint analyses,inactive/insuufficiently active adults who reported sitting more than 8 h/day had the highest total(female:3.99%(95%confidence interval(95%CI):3.09%-4.88%);male:3.79%(95%CI:2.75%-4.82%))and trunk body fat percentages(female:4.21%(95%CI:3.09%-5.32%);male:4.07%(95%CI:2.95%-5.19%))when compared with those who were active and sitting less than 4 h/day.Conclusion:Prolonged daily sitting time was associated with increased body fat among U.S.adults.The higher body fat associated with 6 h/day sitting may not be offset by achieving recommended levels of physical activity.

Hybrid model for BOF oxygen blowing time prediction based on oxygen balance mechanism and deep neural network

The amount of oxygen blown into the converter is one of the key parameters for the control of the converter blowing process,which directly affects the tap-to-tap time of converter. In this study, a hybrid model based on oxygen balance mechanism (OBM) and deep neural network (DNN) was established for predicting oxygen blowing time in converter. A three-step method was utilized in the hybrid model. First, the oxygen consumption volume was predicted by the OBM model and DNN model, respectively. Second, a more accurate oxygen consumption volume was obtained by integrating the OBM model and DNN model. Finally, the converter oxygen blowing time was calculated according to the oxygen consumption volume and the oxygen supply intensity of each heat. The proposed hybrid model was verified using the actual data collected from an integrated steel plant in China, and compared with multiple linear regression model, OBM model, and neural network model including extreme learning machine, back propagation neural network, and DNN. The test results indicate that the hybrid model with a network structure of 3 hidden layer layers, 32-16-8 neurons per hidden layer, and 0.1 learning rate has the best prediction accuracy and stronger generalization ability compared with other models. The predicted hit ratio of oxygen consumption volume within the error±300 m^(3)is 96.67%;determination coefficient (R^(2)) and root mean square error (RMSE) are0.6984 and 150.03 m^(3), respectively. The oxygen blow time prediction hit ratio within the error±0.6 min is 89.50%;R2and RMSE are0.9486 and 0.3592 min, respectively. As a result, the proposed model can effectively predict the oxygen consumption volume and oxygen blowing time in the converter.