Adaptive Fourier Decomposition Based Time-Frequency Analysis

The attempt to represent a signal simultaneously in time and frequency domains is full of challenges. The recently proposed adaptive Fourier decomposition （AFD） offers a practical approach to solve this problem. This paper presents the principles of the AFD based time-frequency analysis in three aspects： instantaneous frequency analysis, frequency spectrum analysis, and the spectrogram analysis. An experiment is conducted and compared with the Fourier transform in convergence rate and short-time Fourier transform in time-frequency distribution. The proposed approach performs better than both the Fourier transform and short-time Fourier transform.

An application of matching pursuit time-frequency decomposition method using multi-wavelet dictionaries

In the time-frequency analysis of seismic signals, the matching pursuit algorithm is an effective tool for non-stationary signals, and has high time-frequency resolution and a transient structure with local self-adaption. We expand the time-frequency dictionary library with Ricker, Morlet, and mixed phase seismic wavelets, to make the method more suitable for seismic signal time-frequency decomposition. In this paper, we demonstrated the algorithm theory using synthetic seismic data, and tested the method using synthetic data with 25% noise. We compared the matching pursuit results of the time-frequency dictionaries. The results indicated that the dictionary which matched the signal characteristics better would obtain better results, and can reflect the information of seismic data effectively.

Enhanced Fourier Transform Using Wavelet Packet Decomposition

Many domains, including communication, signal processing, and image processing, use the Fourier Transform as a mathematical tool for signal analysis. Although it can analyze signals with steady and transitory properties, it has limits. The Wavelet Packet Decomposition (WPD) is a novel technique that we suggest in this study as a way to improve the Fourier Transform and get beyond these drawbacks. In this experiment, we specifically considered the utilization of Daubechies level 4 for the wavelet transformation. The choice of Daubechies level 4 was motivated by several reasons. Daubechies wavelets are known for their compact support, orthogonality, and good time-frequency localization. By choosing Daubechies level 4, we aimed to strike a balance between preserving important transient information and avoiding excessive noise or oversmoothing in the transformed signal. Then we compared the outcomes of our suggested approach to the conventional Fourier Transform using a non-stationary signal. The findings demonstrated that the suggested method offered a more accurate representation of non-stationary and transient signals in the frequency domain. Our method precisely showed a 12% reduction in MSE and a 3% rise in PSNR for the standard Fourier transform, as well as a 35% decrease in MSE and an 8% increase in PSNR for voice signals when compared to the traditional wavelet packet decomposition method.

Improvement of the Mirror Extending in Empirical Mode Decomposition Method and the Technology for Eliminating Frequency Mixing

The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end of data is obviously not extremum, the envelope is determined by the first inner extremum and the image value in the mirror, ignoring the value on the end. This improvement eliminates the frequency compression near the end and decreases the error. Meanwhile, tridiagonal equations are used and the calculation speed is much increased. The temporal process curve is more important in reflecting the real physical process and comparable with other phenomena. Frequency mixing in IMFs makes it impossible. A high frequency reconstruction (HFR) approach is proposed to eliminate common frequency mixing and reconstruct an IMF with all high frequency portions. By this approach, the IMFs without frequency mixing are obtained to express significative processes. The high frequency information restored in high frequency IMF can be extracted by general spectrum method. After obtaining IMFs by EMD method, some of the theoretical and technological issues still exist when using the IMFs. The consistency of IMFs with real physical process is discussed in detail. By virtue of the approach proposed in this paper, the EMD method can be widely used in various fields.

A refined Frequency Domain Decomposition tool for structural modal monitoring in earthquake engineering

Output-only structural identification is developed by a refined Frequency Domain Decomposition（rFDD） approach, towards assessing current modal properties of heavy-damped buildings（in terms of identification challenge）, under strong ground motions. Structural responses from earthquake excitations are taken as input signals for the identification algorithm. A new dedicated computational procedure, based on coupled Chebyshev Type Ⅱ bandpass filters, is outlined for the effective estimation of natural frequencies, mode shapes and modal damping ratios. The identification technique is also coupled with a Gabor Wavelet Transform, resulting in an effective and self-contained time-frequency analysis framework. Simulated response signals generated by shear-type frames（with variable structural features） are used as a necessary validation condition. In this context use is made of a complete set of seismic records taken from the FEMA P695 database, i.e. all 44 ＂Far-Field＂（22 NS, 22 WE） earthquake signals. The modal estimates are statistically compared to their target values, proving the accuracy of the developed algorithm in providing prompt and accurate estimates of all current strong ground motion modal parameters. At this stage, such analysis tool may be employed for convenient application in the realm of Earthquake Engineering, towards potential Structural Health Monitoring and damage detection purposes.

TVAR Time-frequency Analysis for Non-stationary Vibration Signals of Spacecraft

Predicting the time-varying auto-spectral density of a spacecraft in high-altitude orbits requires an accurate model for the non-stationary random vibration signals with densely spaced modal frequency. The traditional time-varying algorithm limits prediction accuracy, thus affecting a number of operational decisions. To solve this problem, a time-varying auto regressive （TVAR） model based on the process neural network （PNN） and the empirical mode decomposition （EMD） is proposed. The time-varying system is tracked on-line by establishing a time-varying parameter model, and then the relevant parameter spectrum is obtained. Firstly, the EMD method is utilized to decompose the signal into several intrinsic mode functions （IMFs）. Then for each IMF, the PNN is established and the time-varying auto-spectral density is obtained. Finally, the time-frequency distribution of the signals can be reconstructed by linear superposition. The simulation and the analytical results from an example demonstrate that this approach possesses simplicity, effectiveness, and feasibility, as well as higher frequency resolution.

Parametric adaptive time-frequency representation based on time-sheared Gabor atoms

A localized parametric time-sheared Gabor atom is derived by convolving a linear frequency modulated factor, modulating in frequency and translating in time to a dilated Gaussian function, which is the generalization of Gabor atom and is more delicate for matching most of the signals encountered in practice, especially for those having frequency dispersion characteristics. The time-frequency distribution of this atom concentrates in its time center and frequency center along energy curve, with the curve being oblique to a certain extent along the time axis. A novel parametric adaptive time-frequency distribution based on a set of the derived atoms is then proposed using a adaptive signal subspace decomposition method in frequency domain, which is non-negative time-frequency energy distribution and free of cross-term interference for multicomponent signals. The results of numerical simulation manifest the effectiveness of the approach in time-frequency representation and signal de-noising processing.

Determination of Instantaneous Frequencies of Low Plasma Waves in the Magnetosheath Using Empirical Mode Decomposition (EMD) and Hilbert Transform (HT)

The observations of in-situ spacecraft mission in the magnetosheath and a region of thermalized subsonic plasma behind the bow shock reveal a non-linear behaviour of plasma waves. The study of waves and optics in Physics has given the understanding of the effect of many waves coming together to form a wave field or wave packet. The common aspect of such study shows that two or more waves can superimpose constructively or destructively. The sudden high magnetic field data in the magnetosheath displays such possibility of superposition of waves. In this paper, we use the empirical mode decomposition (EMD) and Hilbert transform (HT) techniques to determine the instantaneous frequencies of low frequency plasma waves in the magnetosheath. Our analysis has shown that the turbulent behavior of magnetic field in the magnetosheath within the selected period is due to superposition of waves.

A Disturbance Source Location Method on the Low Frequency Oscillation With Time-varying Steady-state Points

The low frequency oscillation is a serious threat to security and stability of a power grid.How to locate the disturbance source accurately is an important issue to low frequency oscillation disposal.Existing methods have poor adaptability to the low frequency oscillation with time-varying steady-state points because of the limitations in the location criterion derivation.A disturbance source location method on a low frequency oscillation with good generality is presented in the paper.Firstly,the reasons why the steady-state points are time-varying on a low frequency oscillation are analyzed.Then,based on the energy function construction form,the branch transmission energy is decomposed into state energy,reciprocating energy and dissipation energy by mathematical derivation.The flow direction of the dissipation energy shows the source and destination of the disturbance energy,and the specific location of a disturbance source can be identified according to its flow direction.Meanwhile,to meet the needs of energy calculation,a recognition method on the electrical quantities steady-state points is also presented by using the cubic spline interpolation.Simulation results show the correctness of the derivation and analysis on energy structure in the paper,and the disturbance source can be located accurately according to the dissipation energy.

High-precision frequency attenuation analysis and its application

Based on seismic attenuation theory in a fluid-filled porous medium, we improve conventional methods of low-frequency shadow analysis （LFSA） and energy absorption analysis （EAA） and propose a high-precision frequency attenuation analysis technology. First, we introduce the method of three-parameter wavelet transform and the time-frequency focused criterion and develop a high-precision time-frequency analysis method based on an adaptive three-parameter wavelet transform, which has high time-frequency resolution with benefit to LFSA and can obtain a single-peaked spectrum with narrow side-lobes with benefit to EAA. Second, we correctly compute absorption coefficient by curve fitting based on the nonlinear Nelder-Mead algorithm and effectively improve EAA precision. Practical application results show that the proposed frequency attenuation analysis technology integrated with LFSA and EAA can effectively predict favorable zones of carbonate oolitic reservoir. Furthermore, reservoir prediction results based on LFSA correspond with EAA. The new technology can effectively improve reservoir prediction reliability and reduce exploration risk.

Gravity inversion using the frequency characteristics of the density distribution

Three-dimensional gravity inversion based on the mass property model is very popular in recent years. The time and efficiency of inversion algorithms is relative to the magnitude of the target mesh. One approach is to search over the entire solution space for a more refined result. However, the inversion will be difficult with the increased parameters in the large search space and the number of computations increases exponentially. ｜n this paper, we propose a novel approach based on the frequency characteristics of the density distribution over the mesh. The purposes of our study are to reduce the parameters of three- dimensional gravity inversion and to lighten the image quality of the inversion result. The results show that the new method can expedite the inversion processing and get a better geological interpretation than tradition methods.

Rolling element bearing instantaneous rotational frequency estimation based on EMD soft-thresholding denoising and instantaneous fault characteristic frequency

The accurate estimation of the rolling element bearing instantaneous rotational frequency(IRF) is the key capability of the order tracking method based on time-frequency analysis. The rolling element bearing IRF can be accurately estimated according to the instantaneous fault characteristic frequency(IFCF). However, in an environment with a low signal-to-noise ratio(SNR), e.g., an incipient fault or function at a low speed, the signal contains strong background noise that seriously affects the effectiveness of the aforementioned method. An algorithm of signal preprocessing based on empirical mode decomposition(EMD) and wavelet shrinkage was proposed in this work. Compared with EMD denoising by the cross-correlation coefficient and kurtosis(CCK) criterion, the method of EMD soft-thresholding(ST) denoising can ensure the integrity of the signal, improve the SNR, and highlight fault features. The effectiveness of the algorithm for rolling element bearing IRF estimation by EMD ST denoising and the IFCF was validated by both simulated and experimental bearing vibration signals at a low SNR.

Adaptive Time Frequency Distribution Based on Linear Chirp Modulated Gaussian Functions

We propose a method that uses linear chirp modulated Gaussian functions as the elementary functions, by adaptively adjusting variances, time frequency centers and sweep rates, to decompose signals. By taking WVD, an improved adaptive time frequency distribution is developed, which is non negative, free of cross term interference, and of better time frequency resolution. The paper presents an effective numerical algorithm to estimate the optimal parameters of the basis. Simulations indicate that the proposed approach is effective in analyzing signal's time frequency behavior.

Application of time–frequency entropy from wake oscillation to gas–liquid flow pattern identification

Gas–liquid two-phase flow abounds in industrial processes and facilities. Identification of its flow pattern plays an essential role in the field of multiphase flow measurement. A bluff body was introduced in this study to recognize gas–liquid flow patterns by inducing fluid oscillation that enlarged differences between each flow pattern. Experiments with air–water mixtures were carried out in horizontal pipelines at ambient temperature and atmospheric pressure. Differential pressure signals from the bluff-body wake were obtained in bubble, bubble/plug transitional, plug, slug, and annular flows. Utilizing the adaptive ensemble empirical mode decomposition method and the Hilbert transform, the time–frequency entropy S of the differential pressure signals was obtained. By combining S and other flow parameters, such as the volumetric void fraction β, the dryness x, the ratio of density φ and the modified fluid coefficient ψ, a new flow pattern map was constructed which adopted S（1–x）φ and （1–β）ψ as the vertical and horizontal coordinates, respectively. The overall rate of classification of the map was verified to be 92.9% by the experimental data. It provides an effective and simple solution to the gas–liquid flow pattern identification problems.

lp norm inverse spectral decomposition and its multi-sparsity fusion interpretation

Spectral decomposition has been widely used in the detection and identifi cation of underground anomalous features(such as faults,river channels,and karst caves).However,the conventional spectral decomposition method is restrained by the window function,and hence,it mostly has low time–frequency focusing and resolution,thereby hampering the fi ne interpretation of seismic targets.To solve this problem,we investigated the sparse inverse spectral decomposition constrained by the lp norm(0<p≤1).Using a numerical model,we demonstrated the higher time–frequency resolution of this method and its capability for improving the seismic interpretation for thin layers.Moreover,given the actual underground geology that can be often complex,we further propose a p-norm constrained inverse spectral attribute interpretation method based on multiresolution time–frequency feature fusion.By comprehensively analyzing the time–frequency spectrum results constrained by the diff erent p-norms,we can obtain more refined interpretation results than those obtained by the traditional strategy,which incorporates a single norm constraint.Finally,the proposed strategy was applied to the processing and interpretation of actual three-dimensional seismic data for a study area covering about 230 km^(2) in western China.The results reveal that the surface water system in this area is characterized by stepwise convergence from a higher position in the north(a buried hill)toward the south and by the development of faults.We thus demonstrated that the proposed method has huge application potential in seismic interpretation.

Quantitative detection of locomotive wheel polygonization under non-stationary conditions by adaptive chirp mode decomposition

Wheel polygonal wear is a common and severe defect,which seriously threatens the running safety and reliability of a railway vehicle especially a locomotive.Due to non-stationary running conditions(e.g.,traction and braking)of the locomotive,the passing frequencies of a polygonal wheel will exhibit time-varying behaviors,which makes it too difficult to effectively detect the wheel defect.Moreover,most existing methods only achieve qualitative fault diagnosis and they cannot accurately identify defect levels.To address these issues,this paper reports a novel quantitative method for fault detection of wheel polygonization under non-stationary conditions based on a recently proposed adaptive chirp mode decomposition(ACMD)approach.Firstly,a coarse-to-fine method based on the time–frequency ridge detection and ACMD is developed to accurately estimate a time-varying gear meshing frequency and thus obtain a wheel rotating frequency from a vibration acceleration signal of a motor.After the rotating frequency is obtained,signal resampling and order analysis techniques are applied to an acceleration signal of an axle box to identify harmonic orders related to polygonal wear.Finally,the ACMD is combined with an inertial algorithm to estimate polygonal wear amplitudes.Not only a dynamics simulation but a field test was carried out to show that the proposed method can effectively detect both harmonic orders and their amplitudes of the wheel polygonization under non-stationary conditions.

A technique to improve the empirical mode decomposition in the Hilbert-Huang transform

The Hilbert-based time-frequency analysis has promising capacity to reveal the time-variant behaviors of a sys- tem.To admit well-behaved Hilbert transforms,component decomposition of signals must be performed beforehand.This was first systematically implemented by the empirical mode decomposition(EMD)in the Hilbert-Huang transform,which can provide a time-frequency representation of the signals.The EMD,however,has limitations in distinguishing different components in narrowband signals commonly found in free-decay vibration signals.In this study,a technique for decompo- sing components in narrowband signals based on waves' beating phenomena is proposed to improve the EMD,in which the time scale structure of the signal is unveiled by the Hilbert transform as a result of wave beating,the order of component ex- traction is reversed from that in the EMD and the end effect is confined.The proposed technique is verified by performing the component decomposition of a simulated signal and a free decay signal actually measured in an instrumented bridge structure.In addition,the adaptability of the technique to time-variant dynamic systems is demonstrated with a simulated time-variant MDOF system.

Preparation of novel Ni-Ir/γ-Al_2O_3 catalyst via high-frequency cold plasma direct reduction process

The novel Ni-Ir/γ-Al2O3 catalyst, denoted as NIA-P, was prepared by high-frequency cold plasma direct reduction method under ambient conditions without thermal treatment, and the conventional sample, denoted as NIA-CR, was prepared by impregnation, thermal calcination, and then by H2 reduction method. The effects of reduction methods on the catalysts for ammonia decomposition were studied, and they were characterized by XRD, N2 adsorption, XPS, and H2-TPD. It was found that the plasma-reduced NIA-P sample showed a better catalytic performance, over which ammonia conversion was 68.9%, at T = 450℃, P = 1 atm, and GHSV = 30, 000 h^-1. It was 31.7% higher than that of the conventional NIA-CR sample. XRD results showed that the crystallite size decreased for the sample with plasma reduction, and the dispersion of active components was improved. There were more active components on the surface of the NIA-P sample from the XPS results. This effect resulted in the higher activity for decomposition of ammonia. Meanwhile, the plasma process significantly decreased the time of preparing catalyst.

Fuel Gas Production from Biomass Sources by Radio Frequency In-Liquid Plasma Method

Cellulose is a kind of saccharide that is the main component in cell walls of plants and therefore is the organic compound that exists in the largest amount in nature. The purpose of this experiment is to convert cellulose to a fuel. Radio frequency (RF) in-liquid plasma is generated in a cellulose distributed solution and a glucose solution, and the generation gas rate is measured. While hydrogen is the main gas generated by the plasma breakdown, carbon monoxide, carbon dioxide, and low-grade flammable gases are also produced. In the glucose water solution or the glucose distributed solution, the solution itself evaporates and decomposes inside the plasma but since the saccharides are non-volatile, they cannot penetrate into the plasma and are not decomposition. However, when the cellulose is at concentrations of 30 wt% or more, it becomes granular and can directly enter the plasma as a solid, where the plasma decomposes the cellulose itself, significantly increasing the amount of gas generated. In addition, the spectrometry of the plasma emission shows the solution after the creation of plasma has the ability to absorb ultraviolet light.

Method for wheat ear counting based on frequency domain decomposition of MSVF-ISCT

Wheat ear counting is a prerequisite for the evaluation of wheat yield.A wheat ear counting method based on frequency domain decomposition is proposed in this study to improve the accuracy of wheat yield estimation.The frequency domain decomposition of wheat ear image is completed by multiscale support value filter(MSVF)combined with improved sampled contourlet transform(ISCT).Support Vector Machine(SVM)is the classic classification and regression algorithm of machine learning.MSVF based on this has strong frequency domain filtering and generalization ability,which can effectively remove the complex background,while the multi-direction characteristics of ISCT enable it to represent the contour and texture information of wheat ears.In order to improve the level of wheat yield prediction,MSVF-ISCT method is used to decompose the ear image in multiscale and multi direction in frequency domain,reduce the interference of irrelevant information,and generate the sub-band image with more abundant information components of ear feature information.Then,the ear feature is extracted by morphological operation and maximum entropy threshold segmentation,and the skeleton thinning and corner detection algorithms are used to count the results.The number of wheat ears in the image can be accurately counted.Experiments show that compared with the traditional algorithms based on spatial domain,this method significantly improves the accuracy of wheat ear counting,which can provide guidance and application for the field of agricultural precision yield estimation.