We present a new global model of collinear autocorrelation based on second harmonic generation nonlinearity.The model is rigorously derived from the nonlinear coupled wave equation specific to the autocorrelation meas...We present a new global model of collinear autocorrelation based on second harmonic generation nonlinearity.The model is rigorously derived from the nonlinear coupled wave equation specific to the autocorrelation measurement configuration,without requiring a specific form of the incident pulse function.A rigorous solution of the nonlinear coupled wave equation is obtained in the time domain and expressed in a general analytical form.The global model fully accounts for the nonlinear interaction and propagation effects within nonlinear crystals,which are not captured by the classical local model.To assess the performance of the global model compared to the classic local model,we investigate the autocorrelation signals obtained from both models for different incident pulse waveforms and different full-widthes at half-maximum(FWHMs).When the incident pulse waveform is Lorentzian with an FWHM of 200 fs,the global model predicts an autocorrelation signal FWHM of 399.9 fs,while the classic local model predicts an FWHM of 331.4 fs.The difference between the two models is 68.6 fs,corresponding to an error of 17.2%.Similarly,for a sech-type incident pulse with an FWHM of 200 fs,the global model predicts an autocorrelation signal FWHM of 343.9 fs,while the local model predicts an FWHM of 308.8 fs.The difference between the two models is 35.1 fs,with an error of 10.2%.We further examine the behavior of the models for Lorentzian pulses with FWHMs of 100 fs,200 fs and 500 fs.The differences between the global and local models are 17.1 fs,68.6 fs and 86.0 fs,respectively,with errors approximately around 17%.These comparative analyses clearly demonstrate the superior accuracy of the global model in intensity autocorrelation modeling.展开更多
Secret key generation(SKG)is a promising solution to the problem of wireless communications security.As the first step of SKG,channel probing affects it significantly.Although there have been some probing schemes,ther...Secret key generation(SKG)is a promising solution to the problem of wireless communications security.As the first step of SKG,channel probing affects it significantly.Although there have been some probing schemes,there is a lack of research on the optimization of the probing process.This study investigates how to optimize correlated parameters to maximize the SKG rate(SKGR)in the time-division duplex(TDD)mode.First,we build a probing model which includes the effects of transmitting power,the probing period,and the dimension of sample vectors.Based on the model,the analytical expression of the SKGR is given.Next,we formulate an optimization problem for maximizing the SKGR and give an algorithm to solve it.We conclude the SKGR monotonically increases as the transmitting power increases.Relevant mathematical proofs are given in this study.From the simulation results,increasing appropriately the probing period and the dimension of the sample vector could increase the SKGR dramatically compared to a yardstick,which indicates the importance of optimizing the parameters related to the channel probing phase.展开更多
Soil nonlinear behavior displays noticeable effects on the site seismic response.This study proposes a new functional expression of the skeleton curve to replace the hyperbolic skeleton curve.By integrating shear modu...Soil nonlinear behavior displays noticeable effects on the site seismic response.This study proposes a new functional expression of the skeleton curve to replace the hyperbolic skeleton curve.By integrating shear modulus and combining the dynamic skeleton curve and the damping degradation coefficient,the constitutive equation of the logarithmic dynamic skeleton can be obtained,which considers the damping effect in a soil dynamics problem.Based on the finite difference method and the multi-transmitting boundary condition,a 1D site seismic response analysis program called Soilresp1D has been developed herein and used to analyze the time-domain seismic response in three types of sites.At the same time,this study also provides numerical simulation results based on the hyperbolic constitutive model and the equivalent linear method.The results verify the rationality of the new soil dynamic constitutive model.It can analyze the mucky soil site nonlinear seismic response,reflecting the deformation characteristics and damping effect of the silty soil.The hysteresis loop area is more extensive,and the residual strain is evident.展开更多
The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is pr...The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.展开更多
Information on crop acreage is important for formulating national food polices and economic planning. Spatial sampling, a combination of traditional sampling methods and remote sensing and geographic information syst...Information on crop acreage is important for formulating national food polices and economic planning. Spatial sampling, a combination of traditional sampling methods and remote sensing and geographic information system (GIS) technology, provides an efficient way to estimate crop acreage at the regional scale. Traditional sampling methods require that the sampling units should be independent of each other, but in practice there is often spatial autocorrelation among crop acreage contained in the sampling units. In this study, using Dehui County in Jilin Province, China, as the study area, we used a thematic crop map derived from Systeme Probatoire d'Observation de la Terre (SPOT-5) imagery, cultivated land plots and digital elevation model data to explore the spatial autocorrelation characteristics among maize and rice acreage included in sampling units of different sizes, and analyzed the effects of different stratification criteria on the level of spatial autocorrelation of the two crop acreages within the sampling units. Moran's/, a global spatial autocorrelation index, was used to evaluate the spatial autocorrelation among the two crop acreages in this study. The results showed that although the spatial autocorrelation level among maize and rice acreages within the sampling units generally decreased with increasing sampling unit size, there was still a significant spatial autocorrelation among the two crop acreages included in the sampling units (Moran's / varied from 0.49 to 0.89), irrespective of the sampling unit size. When the sampling unit size was less than 3000 m, the stratification design that used crop planting intensity (CPI) as the stratification criterion, with a stratum number of 5 and a stratum interval of 20% decreased the spatial autocorrelation level to almost zero for the maize and rice area included in sampling units within each stratum. Therefore, the traditional sampling methods can be used to estimate the two crop acreages. Compared with CPI, there was still a strong spatial correlation among the two crop acreages included in the sampling units belonging to each stratum when cultivated land fragmentation and ground slope were used as stratification criterion. As far as the selection of stratification criteria and sampling unit size is concerned, this study provides a basis for formulating a reasonable spatial sampling scheme to estimate crop acreage.展开更多
This paper proposes a desirable method to detect different kinds of low probability of intercept (LPI) radar signals, targeted at the main intra-pulse modulation method of LPI radar signals including the signals of li...This paper proposes a desirable method to detect different kinds of low probability of intercept (LPI) radar signals, targeted at the main intra-pulse modulation method of LPI radar signals including the signals of linear frequency modulation, phase code, and frequency code. Firstly, it improves the coherent integration of LPI radar signals by adding the periodicity of the ambiguity function. Then, it develops a frequency domain detection method based on fast Fourier transform (FFT) and segmented autocorrelation function to detect signals without features of linear frequency modulation by virtue of the distribution characteristics of noise signals in the frequency domain. Finally, this paper gives a verification of the performance of the method for different signal-to-noise ratios by conducting simulation experiments, and compares the method with existing ones. Additionally, this method is characterized by the straightforward calculation and high real-time performance, which is conducive to better detecting all kinds of LPI radar signals.展开更多
Considering the calculated result and higher degeneracy existing in the calculation of autocorrelation topological index totally depend on experimental parameters, a new group of autocorrelation topological index as ...Considering the calculated result and higher degeneracy existing in the calculation of autocorrelation topological index totally depend on experimental parameters, a new group of autocorrelation topological index as A t, B t, C t and D t was designed and developed based on the vertex degree of molecular topology and autocorrelation function of mathematics. Autocorrelation function f(i) was calculated from the square root of the vertex degree, revised vertex degree and their combination, and they are (δ i) 1/2 , (δ V i) 1/2 ,(δ V i+δ i) 1/2 and (δ E i-δ i) 1/2 / N. With the matrix description method achieved, and the unit input in matrix of unsaturated bond and heteroatoms revised based on the adjacency matrix and distance matrix of organic molecular graph, the corresponding computer software has also been designed and developed. Better results have been obtained for the application of these indexes in QSAR study of organic chemicals.展开更多
Cyclotomic sequences have good cryptographic properties and are closely related to difference sets.This paper proposes a new class of binary generalized cyclotomic sequences of order two and length pqr.Its linear comp...Cyclotomic sequences have good cryptographic properties and are closely related to difference sets.This paper proposes a new class of binary generalized cyclotomic sequences of order two and length pqr.Its linear complexity,minimal polynomial,and autocorrelation are investigated.The results show that these sequences have a large linear complexity when 2∈D1,which means they can resist the Berlekamp-Massey attack.Furthermore,the autocorrelation values are close to 0 with a probability of approximately 1?1/r.Therefore,when r is a big prime,the new sequence has a good autocorrelation.展开更多
Define and theory of autocorrelation decision tree (ADT) is introduced. In spatial data mining, spatial parallel query are very expensive operations. A new parallel algorithm in terms of autocorrelation decision tre...Define and theory of autocorrelation decision tree (ADT) is introduced. In spatial data mining, spatial parallel query are very expensive operations. A new parallel algorithm in terms of autocorrelation decision tree is presented. And the new method reduces CPU- and I/O-time and improves the query efficiency of spatial data. For dynamic load balancing, there are better control and optimization. Experimental performance comparison shows that the improved algorithm can obtain a optimal accelerator with the same quantities of processors. There are more completely accesses on nodes. And an individual implement of intelligent information retrieval for spatial data mining is presented.展开更多
In developing counties, efficiency of economic development has been determined by the analysis of industrial production. An examination of the characteristic of industrial sector is an essential aspect of growth studi...In developing counties, efficiency of economic development has been determined by the analysis of industrial production. An examination of the characteristic of industrial sector is an essential aspect of growth studies. The growth of a country can be measured by Gross Domestic Product (GDP). GDP is substantially affected by the industrial output. Industrial gross output is mainly a function of capital and labor input. If the effect of labor and capital input to output is at a satisfactory level in an industry or in a group of industries, then industrial investment will increase. As a result, the number of industries will increase, which will directly affect GDP and also will decrease the unemployment rate. This is why, industrial input-output relationship is so important for any industry as well as for the overall industrial sector of a country. To forecast the production of a firm is necessary to identify the appropriate model. MD. M. Hossain et al. [1] have shown that Cobb-Douglas production function with additive errors was more suitable for some selected manufacturing industries in Bangladesh. The main purpose of this paper is to detect the autocorrelation problem of Cobb-Douglas production model with additive errors. The result shows that autocorrelation is presented in some manufacturing industries. Finally, this paper removes the autocorrelation problem and re-estimates the parameters of the Cobb- Douglas production function with additive errors.展开更多
Spatial autocorrelation is a measure of the correlation of an observation with other observations through space. Most statistical analyses are based on the assumption that the values of observations are independent of...Spatial autocorrelation is a measure of the correlation of an observation with other observations through space. Most statistical analyses are based on the assumption that the values of observations are independent of one another. Spatial autocorrelation violates this assumption, because observations at near-by locations are related to each other, and hence, the consideration of spatial autocorrelations has been gaining attention in crash data modeling in recent years, and research have shown that ignoring this factor may lead to a biased estimation of the modeling parameters. This paper examines two spatial autocorrelation indices: Moran’s Index;and Getis-Ord Gi* statistic to measure the spatial autocorrelation of vehicle crashes occurred in Boone County roads in the state of Missouri, USA for the years 2013-2015. Since each index can identify different clustering patterns of crashes, therefore this paper introduces a new hybrid method to identify the crash clustering patterns by combining both Moran’s Index and Gi*?statistic. Results show that the new method can effectively improve the number, extent, and type of crash clustering along roadways.展开更多
Identifying vehicular crash high risk locations along highways is important for understanding the causes of vehicle crashes and to determine effective countermeasures based on the analysis. This paper presents a GIS a...Identifying vehicular crash high risk locations along highways is important for understanding the causes of vehicle crashes and to determine effective countermeasures based on the analysis. This paper presents a GIS approach to examine the spatial patterns of vehicle crashes and determines if they are spatially clustered, dispersed, or random. Moran’s I and Getis-Ord Gi* statistic are employed to examine spatial patterns, clusters mapping of vehicle crash data, and to generate high risk locations along highways. Kernel Density Estimation (KDE) is used to generate crash concentration maps that show the road density of crashes. The proposed approach is evaluated using the 2013 vehicle crash data in the state of Indiana. Results show that the approach is efficient and reliable in identifying vehicle crash hot spots and unsafe road locations.展开更多
Spatial autocorrelation methodologies, including Global Moran’s I and Local Indicators of Spatial Association statistic (LISA), were used to describe and map spatial clusters of 13 leading malignant neoplasms in Taiw...Spatial autocorrelation methodologies, including Global Moran’s I and Local Indicators of Spatial Association statistic (LISA), were used to describe and map spatial clusters of 13 leading malignant neoplasms in Taiwan. A logistic regression fit model was also used to identify similar characteristics over time. Two time periods (1995-1998 and 2005-2008) were compared in an attempt to formulate common spatio-temporal risks. Spatial cluster patterns were identified using local spatial autocorrelation analysis. We found a significant spatio-temporal variation between the leading malignant neoplasms and well-documented spatial risk factors. For instance, in Taiwan, cancer of the oral cavity in males was found to be clustered in locations in central Taiwan, with distinct differences between the two time periods. Stomach cancer morbidity clustered in aboriginal townships, where the prevalence of Helicobacter pylori is high and even quite marked differences between the two time periods were found. A method which combines LISA statistics and logistic regression is an effective tool for the detection of space-time patterns with discontinuous data. Spatio-temporal mapping comparison helps to clarify issues such as the spatial aspects of both two time periods for leading malignant neoplasms. This helps planners to assess spatio-temporal risk factors, and to ascertain what would be the most advantageous types of health care policies for the planning and implementation of health care services. These issues can greatly affect the performance and effectiveness of health care services and also provide a clear outline for helping us to better understand the results in depth.展开更多
This paper uses a spatial statistics method based on the calculation of spatial autocorrelation as a possible approach for modeling and quantifying the distribution of urban land price in Changzhou City, Jiangsu Provi...This paper uses a spatial statistics method based on the calculation of spatial autocorrelation as a possible approach for modeling and quantifying the distribution of urban land price in Changzhou City, Jiangsu Province. GIS and spatial statistics provide a useful way for describing the distribution of urban land price both spatially and temporally, and have proved to be useful for understanding land price distribution pattern better. In this paper, we apply the statistical analysis method to 8379 urban land price samples collected from Changzhou Land Market, and it is turned out that the proposed approach can effectively identify the spatial clusters and local point patterns in dataset and forms a general method for conceptualizing the land price structure. The results show that land price structure in Changzhou City is very complex and that even where there is a high spatial autocorrelation, the land price is still relatively heterogeneous. Furthermore, lands for different uses have different degrees of spatial autocorrelation. Spatial autocorrelation of commercial lands is more intense than that of residential and industrial lands in regional central district. This means that treating land price as integration of homogeneous units can limit analysis of pattern, over-simplifying the structure of land price, but the methods, just as the autocorrelation approaches, are useful tools for quantifying the variables of land price.展开更多
Popular regional inequality indexes such as variation coefficient and Gini coefficient can only reveal overall inequality, and have limited ability in revealing spatial dependence or spatial agglomeration. Recently so...Popular regional inequality indexes such as variation coefficient and Gini coefficient can only reveal overall inequality, and have limited ability in revealing spatial dependence or spatial agglomeration. Recently some methods of exploratory spatial data analysis such as spatial autocorrelation have provided effective tools to analyze spatial agglomeration and cluster, which can reveal the pattern of regional inequality. This article attempts to use spatial autocorrelation at county level to get refined spatial pattern of regional disparity in Chinese northeast economic region over 2000-2006 (2001 absent). The result indicates that the basic trend of regional economy is an increasing concentration of growth among counties in northeast economic region, and there are two geographical clusters of poorer counties including the counties in western Liaoning Province and adjacent counties in Inner Mongolia, poorer counties of Heihe, Qiqihar and Suihua in Heilongjiang Province. This article also reveals that we can use the methods of exploratory spatial data analysis as the supplementary analysis methods in regional economic analysis.展开更多
Considering the problems of classical structure parameters that existed in the study of quantitative structure activity relationship (QSAR). Two new groups of autocorrelation topological indexes V(t), E(t), (P(t)) and...Considering the problems of classical structure parameters that existed in the study of quantitative structure activity relationship (QSAR). Two new groups of autocorrelation topological indexes V(t), E(t), (P(t)) and A(t), B(t), C(t), D(t) were developed on the basis of molecular topology and autocorrelation function in mathematics. The first group were obtained from Van der Waals volume, electronegativity and topological vertex degree;and the second group were obtained from the different combination of topological vertex degree.Corresponding softwares of ATIJP and ATITP have been developed for calculating these two new groups of indexes. Better results have been obtained from the application of these indexes in QSAR study.展开更多
To the shortage of the traditional analysis methods about train impact,this paper put forward a new method us- ing autocorrelation theory and virtual instrument technology to analyze train impulse Using a double-MCU s...To the shortage of the traditional analysis methods about train impact,this paper put forward a new method us- ing autocorrelation theory and virtual instrument technology to analyze train impulse Using a double-MCU system,the accelera- tion signals were acquired at different speed by train,and were transmitted into PC through USB interface.Besides the impulse signals,the acquisition data included other useless signals.The autocorrelation function was small when trains run steadily,but was greater during train impact happened.So the autocorrelation function was adopted to distill the valid impulse data.After frequency domain analyzed and autocorrelation analyzed on the Virtual Instrument flat,a new train impulse grade assessment cri- terion was built,based on the correlation peak and the width of the peak.In experiment,the impulse signal was separated from noise signal well and truly,and the quantitative model of evaluating train impulse was believable.This system possessed a certain extent theory value and application value.展开更多
Spatial analytical techniques and models are often used in epidemiology to identify spatial anomalies (hotspots) in disease regions. These analytical approaches can be used to identify not only the location of such ho...Spatial analytical techniques and models are often used in epidemiology to identify spatial anomalies (hotspots) in disease regions. These analytical approaches can be used to identify not only the location of such hotspots, but also their spatial patterns. We used spatial autocorrelation methodologies, including Global Moran's I and Local Getis-Ord statistics, to describe and map spatial clusters and areas in which nine malignant neoplasms are situated in Taiwan. In addition, we used a logistic regression model to test the characteristics of similarity and dissimilarity between males and females and to formulate the common spatial risk. The mean found by local spatial autocorrelation analysis was used to identify spatial cluster patterns. We found a significant relationship between the leading malignant neoplasms and well-documented spatial risk factors. For instance, in Taiwan, the geographic distribution of clusters where oral cavity cancer in males is prevalent was closely correspond to the locations in central Taiwan with serious metal pollution. In females, clusters of oral cavity cancer were closely related with aboriginal townships in eastern Taiwan, where cigarette smoking, alcohol drinking, and betel nut chewing are commonplace. The difference between males and females in the spatial distributions was stark. Furthermore, areas with a high morbidity of gastric cancer were clustered in aboriginal townships where the occurrence of Helicobacter pylori is frequent. Our results revealed a similarity between both males and females in spatial pattern. Cluster mapping clarified the spatial aspects of both internal and external correlations for the nine malignant neoplasms. In addition, using a method of logistic regression also enabled us to find differentiation between gender-specific spatial patterns.展开更多
Rainfall is a highly variable climatic element, and rainfall-related changes occur in spatial and temporal dimensions within a regional climate. The purpose of this study is to investigate the spatial autocorrelation ...Rainfall is a highly variable climatic element, and rainfall-related changes occur in spatial and temporal dimensions within a regional climate. The purpose of this study is to investigate the spatial autocorrelation changes of Iran's heavy and super-heavy rainfall over the past 40 years. For this purpose, the daily rainfall data of 664 meteorological stations between 1971 and 2011 are used. To analyze the changes in rainfall within a decade, geostatistical techniques like spatial autocorrelation analysis of hot spots, based on the Getis-Ord Gi statistic, are employed. Furthermore, programming features in MATLAB, Surfer, and GIS are used. The results indicate that the Caspian coast, the northwest and west of the western foothills of the Zagros Mountains of Iran, the inner regions of Iran, and southern parts of Southeast and Northeast Iran, have the highest likelihood of heavy and super-heavy rainfall. The spatial pattern of heavy rainfall shows that, despite its oscillation in different periods, the maximum positive spatial autocorrelation pattern of heavy rainfall includes areas of the west, northwest and west coast of the Caspian Sea. On the other hand, a negative spatial autocorrelation pattern of heavy rainfall is observed in central Iran and parts of the east, particularly in Zabul. Finally, it is found that patterns of super-heavy rainfall are similar to those of heavy rainfall.展开更多
基金Project supported by the Science and Technology Project of Guangdong(Grant No.2020B010190001)the National Natural Science Foundation of China(Grant No.11974119)+1 种基金the Guangdong Innovative and Entrepreneurial Research Team Program(Grant No.2016ZT06C594)the National Key R&D Program of China(Grant No.2018YFA0306200)。
文摘We present a new global model of collinear autocorrelation based on second harmonic generation nonlinearity.The model is rigorously derived from the nonlinear coupled wave equation specific to the autocorrelation measurement configuration,without requiring a specific form of the incident pulse function.A rigorous solution of the nonlinear coupled wave equation is obtained in the time domain and expressed in a general analytical form.The global model fully accounts for the nonlinear interaction and propagation effects within nonlinear crystals,which are not captured by the classical local model.To assess the performance of the global model compared to the classic local model,we investigate the autocorrelation signals obtained from both models for different incident pulse waveforms and different full-widthes at half-maximum(FWHMs).When the incident pulse waveform is Lorentzian with an FWHM of 200 fs,the global model predicts an autocorrelation signal FWHM of 399.9 fs,while the classic local model predicts an FWHM of 331.4 fs.The difference between the two models is 68.6 fs,corresponding to an error of 17.2%.Similarly,for a sech-type incident pulse with an FWHM of 200 fs,the global model predicts an autocorrelation signal FWHM of 343.9 fs,while the local model predicts an FWHM of 308.8 fs.The difference between the two models is 35.1 fs,with an error of 10.2%.We further examine the behavior of the models for Lorentzian pulses with FWHMs of 100 fs,200 fs and 500 fs.The differences between the global and local models are 17.1 fs,68.6 fs and 86.0 fs,respectively,with errors approximately around 17%.These comparative analyses clearly demonstrate the superior accuracy of the global model in intensity autocorrelation modeling.
基金supported in part by the national natural science foundation of China (NSFC) under Grant61871193in part by the R&D Program of key science and technology fields in Guangdong province under Grant 2019B090912001in part by the Guangzhou Key Field R&D Program under Grant 202206030005
文摘Secret key generation(SKG)is a promising solution to the problem of wireless communications security.As the first step of SKG,channel probing affects it significantly.Although there have been some probing schemes,there is a lack of research on the optimization of the probing process.This study investigates how to optimize correlated parameters to maximize the SKG rate(SKGR)in the time-division duplex(TDD)mode.First,we build a probing model which includes the effects of transmitting power,the probing period,and the dimension of sample vectors.Based on the model,the analytical expression of the SKGR is given.Next,we formulate an optimization problem for maximizing the SKGR and give an algorithm to solve it.We conclude the SKGR monotonically increases as the transmitting power increases.Relevant mathematical proofs are given in this study.From the simulation results,increasing appropriately the probing period and the dimension of the sample vector could increase the SKGR dramatically compared to a yardstick,which indicates the importance of optimizing the parameters related to the channel probing phase.
基金Major Program of the National Natural Science Foundation of China under Grant No.52192675 and the 111 Project of China under Grant No.D21001。
文摘Soil nonlinear behavior displays noticeable effects on the site seismic response.This study proposes a new functional expression of the skeleton curve to replace the hyperbolic skeleton curve.By integrating shear modulus and combining the dynamic skeleton curve and the damping degradation coefficient,the constitutive equation of the logarithmic dynamic skeleton can be obtained,which considers the damping effect in a soil dynamics problem.Based on the finite difference method and the multi-transmitting boundary condition,a 1D site seismic response analysis program called Soilresp1D has been developed herein and used to analyze the time-domain seismic response in three types of sites.At the same time,this study also provides numerical simulation results based on the hyperbolic constitutive model and the equivalent linear method.The results verify the rationality of the new soil dynamic constitutive model.It can analyze the mucky soil site nonlinear seismic response,reflecting the deformation characteristics and damping effect of the silty soil.The hysteresis loop area is more extensive,and the residual strain is evident.
基金This work was supported by the National Natural Science Foundation of China(No.11872212)and a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.
基金financially supported by the National Natural Science Foundation of China (41471365,41531179)
文摘Information on crop acreage is important for formulating national food polices and economic planning. Spatial sampling, a combination of traditional sampling methods and remote sensing and geographic information system (GIS) technology, provides an efficient way to estimate crop acreage at the regional scale. Traditional sampling methods require that the sampling units should be independent of each other, but in practice there is often spatial autocorrelation among crop acreage contained in the sampling units. In this study, using Dehui County in Jilin Province, China, as the study area, we used a thematic crop map derived from Systeme Probatoire d'Observation de la Terre (SPOT-5) imagery, cultivated land plots and digital elevation model data to explore the spatial autocorrelation characteristics among maize and rice acreage included in sampling units of different sizes, and analyzed the effects of different stratification criteria on the level of spatial autocorrelation of the two crop acreages within the sampling units. Moran's/, a global spatial autocorrelation index, was used to evaluate the spatial autocorrelation among the two crop acreages in this study. The results showed that although the spatial autocorrelation level among maize and rice acreages within the sampling units generally decreased with increasing sampling unit size, there was still a significant spatial autocorrelation among the two crop acreages included in the sampling units (Moran's / varied from 0.49 to 0.89), irrespective of the sampling unit size. When the sampling unit size was less than 3000 m, the stratification design that used crop planting intensity (CPI) as the stratification criterion, with a stratum number of 5 and a stratum interval of 20% decreased the spatial autocorrelation level to almost zero for the maize and rice area included in sampling units within each stratum. Therefore, the traditional sampling methods can be used to estimate the two crop acreages. Compared with CPI, there was still a strong spatial correlation among the two crop acreages included in the sampling units belonging to each stratum when cultivated land fragmentation and ground slope were used as stratification criterion. As far as the selection of stratification criteria and sampling unit size is concerned, this study provides a basis for formulating a reasonable spatial sampling scheme to estimate crop acreage.
基金supported by the National Natural Science Foundation of China(61571462)Weapons and Equipment Exploration Research Project(7131464)
文摘This paper proposes a desirable method to detect different kinds of low probability of intercept (LPI) radar signals, targeted at the main intra-pulse modulation method of LPI radar signals including the signals of linear frequency modulation, phase code, and frequency code. Firstly, it improves the coherent integration of LPI radar signals by adding the periodicity of the ambiguity function. Then, it develops a frequency domain detection method based on fast Fourier transform (FFT) and segmented autocorrelation function to detect signals without features of linear frequency modulation by virtue of the distribution characteristics of noise signals in the frequency domain. Finally, this paper gives a verification of the performance of the method for different signal-to-noise ratios by conducting simulation experiments, and compares the method with existing ones. Additionally, this method is characterized by the straightforward calculation and high real-time performance, which is conducive to better detecting all kinds of LPI radar signals.
文摘Considering the calculated result and higher degeneracy existing in the calculation of autocorrelation topological index totally depend on experimental parameters, a new group of autocorrelation topological index as A t, B t, C t and D t was designed and developed based on the vertex degree of molecular topology and autocorrelation function of mathematics. Autocorrelation function f(i) was calculated from the square root of the vertex degree, revised vertex degree and their combination, and they are (δ i) 1/2 , (δ V i) 1/2 ,(δ V i+δ i) 1/2 and (δ E i-δ i) 1/2 / N. With the matrix description method achieved, and the unit input in matrix of unsaturated bond and heteroatoms revised based on the adjacency matrix and distance matrix of organic molecular graph, the corresponding computer software has also been designed and developed. Better results have been obtained for the application of these indexes in QSAR study of organic chemicals.
基金supported by the National Key Research and Development Program of China(2016YFB0800601)the Natural Science Foundation of China(61303217+3 种基金61502372)the Fundamental Research Funds for the Central Universities(JB140115)the Natural Science Foundation of Shaanxi Province(2013JQ80022014JQ8313)
文摘Cyclotomic sequences have good cryptographic properties and are closely related to difference sets.This paper proposes a new class of binary generalized cyclotomic sequences of order two and length pqr.Its linear complexity,minimal polynomial,and autocorrelation are investigated.The results show that these sequences have a large linear complexity when 2∈D1,which means they can resist the Berlekamp-Massey attack.Furthermore,the autocorrelation values are close to 0 with a probability of approximately 1?1/r.Therefore,when r is a big prime,the new sequence has a good autocorrelation.
文摘Define and theory of autocorrelation decision tree (ADT) is introduced. In spatial data mining, spatial parallel query are very expensive operations. A new parallel algorithm in terms of autocorrelation decision tree is presented. And the new method reduces CPU- and I/O-time and improves the query efficiency of spatial data. For dynamic load balancing, there are better control and optimization. Experimental performance comparison shows that the improved algorithm can obtain a optimal accelerator with the same quantities of processors. There are more completely accesses on nodes. And an individual implement of intelligent information retrieval for spatial data mining is presented.
文摘In developing counties, efficiency of economic development has been determined by the analysis of industrial production. An examination of the characteristic of industrial sector is an essential aspect of growth studies. The growth of a country can be measured by Gross Domestic Product (GDP). GDP is substantially affected by the industrial output. Industrial gross output is mainly a function of capital and labor input. If the effect of labor and capital input to output is at a satisfactory level in an industry or in a group of industries, then industrial investment will increase. As a result, the number of industries will increase, which will directly affect GDP and also will decrease the unemployment rate. This is why, industrial input-output relationship is so important for any industry as well as for the overall industrial sector of a country. To forecast the production of a firm is necessary to identify the appropriate model. MD. M. Hossain et al. [1] have shown that Cobb-Douglas production function with additive errors was more suitable for some selected manufacturing industries in Bangladesh. The main purpose of this paper is to detect the autocorrelation problem of Cobb-Douglas production model with additive errors. The result shows that autocorrelation is presented in some manufacturing industries. Finally, this paper removes the autocorrelation problem and re-estimates the parameters of the Cobb- Douglas production function with additive errors.
文摘Spatial autocorrelation is a measure of the correlation of an observation with other observations through space. Most statistical analyses are based on the assumption that the values of observations are independent of one another. Spatial autocorrelation violates this assumption, because observations at near-by locations are related to each other, and hence, the consideration of spatial autocorrelations has been gaining attention in crash data modeling in recent years, and research have shown that ignoring this factor may lead to a biased estimation of the modeling parameters. This paper examines two spatial autocorrelation indices: Moran’s Index;and Getis-Ord Gi* statistic to measure the spatial autocorrelation of vehicle crashes occurred in Boone County roads in the state of Missouri, USA for the years 2013-2015. Since each index can identify different clustering patterns of crashes, therefore this paper introduces a new hybrid method to identify the crash clustering patterns by combining both Moran’s Index and Gi*?statistic. Results show that the new method can effectively improve the number, extent, and type of crash clustering along roadways.
文摘In this paper, we obtain an explicit expression for the partial autocorrelation of an ARMA (1.1) process and discuss its asymptotic behaviour briefly.
文摘Identifying vehicular crash high risk locations along highways is important for understanding the causes of vehicle crashes and to determine effective countermeasures based on the analysis. This paper presents a GIS approach to examine the spatial patterns of vehicle crashes and determines if they are spatially clustered, dispersed, or random. Moran’s I and Getis-Ord Gi* statistic are employed to examine spatial patterns, clusters mapping of vehicle crash data, and to generate high risk locations along highways. Kernel Density Estimation (KDE) is used to generate crash concentration maps that show the road density of crashes. The proposed approach is evaluated using the 2013 vehicle crash data in the state of Indiana. Results show that the approach is efficient and reliable in identifying vehicle crash hot spots and unsafe road locations.
文摘Spatial autocorrelation methodologies, including Global Moran’s I and Local Indicators of Spatial Association statistic (LISA), were used to describe and map spatial clusters of 13 leading malignant neoplasms in Taiwan. A logistic regression fit model was also used to identify similar characteristics over time. Two time periods (1995-1998 and 2005-2008) were compared in an attempt to formulate common spatio-temporal risks. Spatial cluster patterns were identified using local spatial autocorrelation analysis. We found a significant spatio-temporal variation between the leading malignant neoplasms and well-documented spatial risk factors. For instance, in Taiwan, cancer of the oral cavity in males was found to be clustered in locations in central Taiwan, with distinct differences between the two time periods. Stomach cancer morbidity clustered in aboriginal townships, where the prevalence of Helicobacter pylori is high and even quite marked differences between the two time periods were found. A method which combines LISA statistics and logistic regression is an effective tool for the detection of space-time patterns with discontinuous data. Spatio-temporal mapping comparison helps to clarify issues such as the spatial aspects of both two time periods for leading malignant neoplasms. This helps planners to assess spatio-temporal risk factors, and to ascertain what would be the most advantageous types of health care policies for the planning and implementation of health care services. These issues can greatly affect the performance and effectiveness of health care services and also provide a clear outline for helping us to better understand the results in depth.
基金Under the auspices of the National Natural Science Foundation of China (No. 40371091), Land Monitoring Project ofthe Ministry of Land and Resources of P. R. China (No. 2005-6.1-6)
文摘This paper uses a spatial statistics method based on the calculation of spatial autocorrelation as a possible approach for modeling and quantifying the distribution of urban land price in Changzhou City, Jiangsu Province. GIS and spatial statistics provide a useful way for describing the distribution of urban land price both spatially and temporally, and have proved to be useful for understanding land price distribution pattern better. In this paper, we apply the statistical analysis method to 8379 urban land price samples collected from Changzhou Land Market, and it is turned out that the proposed approach can effectively identify the spatial clusters and local point patterns in dataset and forms a general method for conceptualizing the land price structure. The results show that land price structure in Changzhou City is very complex and that even where there is a high spatial autocorrelation, the land price is still relatively heterogeneous. Furthermore, lands for different uses have different degrees of spatial autocorrelation. Spatial autocorrelation of commercial lands is more intense than that of residential and industrial lands in regional central district. This means that treating land price as integration of homogeneous units can limit analysis of pattern, over-simplifying the structure of land price, but the methods, just as the autocorrelation approaches, are useful tools for quantifying the variables of land price.
基金supported by the National Natural Science Foundation for Distinguished Young Scholar of China (Grant No.40225004)
文摘Popular regional inequality indexes such as variation coefficient and Gini coefficient can only reveal overall inequality, and have limited ability in revealing spatial dependence or spatial agglomeration. Recently some methods of exploratory spatial data analysis such as spatial autocorrelation have provided effective tools to analyze spatial agglomeration and cluster, which can reveal the pattern of regional inequality. This article attempts to use spatial autocorrelation at county level to get refined spatial pattern of regional disparity in Chinese northeast economic region over 2000-2006 (2001 absent). The result indicates that the basic trend of regional economy is an increasing concentration of growth among counties in northeast economic region, and there are two geographical clusters of poorer counties including the counties in western Liaoning Province and adjacent counties in Inner Mongolia, poorer counties of Heihe, Qiqihar and Suihua in Heilongjiang Province. This article also reveals that we can use the methods of exploratory spatial data analysis as the supplementary analysis methods in regional economic analysis.
文摘Considering the problems of classical structure parameters that existed in the study of quantitative structure activity relationship (QSAR). Two new groups of autocorrelation topological indexes V(t), E(t), (P(t)) and A(t), B(t), C(t), D(t) were developed on the basis of molecular topology and autocorrelation function in mathematics. The first group were obtained from Van der Waals volume, electronegativity and topological vertex degree;and the second group were obtained from the different combination of topological vertex degree.Corresponding softwares of ATIJP and ATITP have been developed for calculating these two new groups of indexes. Better results have been obtained from the application of these indexes in QSAR study.
文摘To the shortage of the traditional analysis methods about train impact,this paper put forward a new method us- ing autocorrelation theory and virtual instrument technology to analyze train impulse Using a double-MCU system,the accelera- tion signals were acquired at different speed by train,and were transmitted into PC through USB interface.Besides the impulse signals,the acquisition data included other useless signals.The autocorrelation function was small when trains run steadily,but was greater during train impact happened.So the autocorrelation function was adopted to distill the valid impulse data.After frequency domain analyzed and autocorrelation analyzed on the Virtual Instrument flat,a new train impulse grade assessment cri- terion was built,based on the correlation peak and the width of the peak.In experiment,the impulse signal was separated from noise signal well and truly,and the quantitative model of evaluating train impulse was believable.This system possessed a certain extent theory value and application value.
文摘Spatial analytical techniques and models are often used in epidemiology to identify spatial anomalies (hotspots) in disease regions. These analytical approaches can be used to identify not only the location of such hotspots, but also their spatial patterns. We used spatial autocorrelation methodologies, including Global Moran's I and Local Getis-Ord statistics, to describe and map spatial clusters and areas in which nine malignant neoplasms are situated in Taiwan. In addition, we used a logistic regression model to test the characteristics of similarity and dissimilarity between males and females and to formulate the common spatial risk. The mean found by local spatial autocorrelation analysis was used to identify spatial cluster patterns. We found a significant relationship between the leading malignant neoplasms and well-documented spatial risk factors. For instance, in Taiwan, the geographic distribution of clusters where oral cavity cancer in males is prevalent was closely correspond to the locations in central Taiwan with serious metal pollution. In females, clusters of oral cavity cancer were closely related with aboriginal townships in eastern Taiwan, where cigarette smoking, alcohol drinking, and betel nut chewing are commonplace. The difference between males and females in the spatial distributions was stark. Furthermore, areas with a high morbidity of gastric cancer were clustered in aboriginal townships where the occurrence of Helicobacter pylori is frequent. Our results revealed a similarity between both males and females in spatial pattern. Cluster mapping clarified the spatial aspects of both internal and external correlations for the nine malignant neoplasms. In addition, using a method of logistic regression also enabled us to find differentiation between gender-specific spatial patterns.
文摘Rainfall is a highly variable climatic element, and rainfall-related changes occur in spatial and temporal dimensions within a regional climate. The purpose of this study is to investigate the spatial autocorrelation changes of Iran's heavy and super-heavy rainfall over the past 40 years. For this purpose, the daily rainfall data of 664 meteorological stations between 1971 and 2011 are used. To analyze the changes in rainfall within a decade, geostatistical techniques like spatial autocorrelation analysis of hot spots, based on the Getis-Ord Gi statistic, are employed. Furthermore, programming features in MATLAB, Surfer, and GIS are used. The results indicate that the Caspian coast, the northwest and west of the western foothills of the Zagros Mountains of Iran, the inner regions of Iran, and southern parts of Southeast and Northeast Iran, have the highest likelihood of heavy and super-heavy rainfall. The spatial pattern of heavy rainfall shows that, despite its oscillation in different periods, the maximum positive spatial autocorrelation pattern of heavy rainfall includes areas of the west, northwest and west coast of the Caspian Sea. On the other hand, a negative spatial autocorrelation pattern of heavy rainfall is observed in central Iran and parts of the east, particularly in Zabul. Finally, it is found that patterns of super-heavy rainfall are similar to those of heavy rainfall.