Underdetermined DOA estimation and blind separation of non-disjoint sources in time-frequency domain based on sparse representation method

This paper deals with the blind separation of nonstation-ary sources and direction-of-arrival （DOA） estimation in the under-determined case, when there are more sources than sensors. We assume the sources to be time-frequency （TF） disjoint to a certain extent. In particular, the number of sources presented at any TF neighborhood is strictly less than that of sensors. We can identify the real number of active sources and achieve separation in any TF neighborhood by the sparse representation method. Compared with the subspace-based algorithm under the same sparseness assumption, which suffers from the extra noise effect since it can-not estimate the true number of active sources, the proposed algorithm can estimate the number of active sources and their cor-responding TF values in any TF neighborhood simultaneously. An-other contribution of this paper is a new estimation procedure for the DOA of sources in the underdetermined case, which combines the TF sparseness of sources and the clustering technique. Sim-ulation results demonstrate the validity and high performance of the proposed algorithm in both blind source separation （BSS） and DOA estimation.

Surface wave attenuation based polarization attributes in time-frequency domain for multicomponent seismic data

In the paper, we propose a surface wave suppression method in time-frequency domain based on the wavelet transform, considering the characteristic difference of polarization attributes, amplitude energy and apparent velocity between the effective signals and strong surface waves. First, we use the proposed method to obtain time-frequency spectra of seismic signals by using the wavelet transform and calculate the instantaneous polarizability at each point based on instantaneous polarization analysis. Then, we separate the surface wave area from the signal area based on the surface-wave apparent velocity and the average energy of the signal. Finally, we combine the polarizability, energy, and frequency characteristic to identify and suppress the signal noise. Model and field data are used to test the proposed filtering method.

Influence of spin–orbit coupling on spin-polarized electronic transport in magnetic semiconductor nanowires with nanosized sharp domain walls

Influence of spin–orbit coupling on spin-polarized electronic transport in magnetic semiconductor nanowires with nanosized sharp domain walls is investigated theoretically.It is shown that the Rashba spin–orbit coupling can enhance significantly the spin-flip scattering of charge carriers from a nanosized sharp domain wall whose extension is much smaller than the carrier＇s Fermi wavelength.When there are more than one domain wall presented in a magnetic semiconductor nanowire,not only the spin-flip scattering of charge carriers from the domain walls but the quantum interference of charge carriers in the intermediate domain regions between neighboring domain walls may play important roles on spin-polarized electronic transport,and in such cases the influences of the Rashba spin–orbit coupling will depend sensitively both on the domain walls＇ width and the domain walls＇ separation.

A DOMAIN DECOMPOSITION ALGORITHM WITH FINITE ELEMENT-BOUNDARY ELEMENT COUPLING

A domain decomposition algorithm coupling the finite element and the boundary element was presented. It essentially involves subdivision of the analyzed domain into sub-regions being independently modeled by two methods, i.e., the finite element method （FEM） and the boundary element method （BEM）. The original problem was restored with continuity and equilibrium conditions being satisfied on the interface of the two sub-regions using an iterative algorithm. To speed up the convergence rate of the iterative algorithm, a dynamically changing relaxation parameter during iteration was introduced. An advantage of the proposed algorithm is that the locations of the nodes on the interface of the two sub-domains can be inconsistent. The validity of the algorithm is demonstrated by the consistence of the results of a numerical example obtained by the proposed method and those by the FEM, the BEM and a present finite element-boundary element （FE-BE） coupling method.

Novel and Self-Consistency Analysis of the QCD Running Coupling α_(s)(Q) in Both the Perturbative and Nonperturbative Domains

The quantum chromodynamics(QCD) coupling αs is the most important parameter for achieving precise QCD predictions. By using the well measured effective coupling α_(s)^(g)1)(Q) defined from the Bjorken sum rules as a basis, we suggest a novel self-consistency way to fix the αs at all scales: The QCD light-front holographic model is adopted for its infrared behavior, and the fixed-order p QCD prediction under the principle of maximum conformality(PMC) is used for its high-energy behavior. Using the PMC scheme-and-scale independent perturbative series,and by transforming it into the one under the physical V scheme, we observe that a precise αs running behavior in both the perturbative and nonperturbative domains with a smooth transition from small to large scales can be achieved.

A Hybrid Method for Electromagnetic Coupling in Large Spaces

A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing the relations among wave vectors at every port of the network nodes was give Scattering characteristics and electromagnetic distributions of every node was calculated independently using FDTD A structure of irises in a waveguide was taken as numerical examples This hybrid method has more advantages than the traditional FDTD method which includes saving calculation time,saving memory spaces and being flexible in setting up FDTD grids

Fully Coupled Effects of Hull,Mooring and Risers Model in Time Domain Based on An Innovative Deep Draft Multi-Spar

The coupled hull, mooring and riser analysis techniques in time domain are widely recognized as the unique approach to predict the accurate global motions. However, these complex issues have not been perfectly solved due to a large number of nonlinear factors, e.g. forces nonlinearity, mooring nonlinearity, motion nonlinearity and so on. This paper investigates the coupled effects through the numerical uncoupled model, mooring coupled model and fully coupled model accounting mooring and risers based on a novel deep draft multi-spar which is especially designed for deepwater in 2009. The numerical static-offset, free-decay, wind-action tests are executed, and finally three hours simulations are conducted under 100-year return period of GOM conditions involving wave, wind and current actions. The damping contributions, response characteristics and mooring line tensions are emphatically studied.

Application of direct computing of one-way coupling technique in seismic analysis of concrete gravity dam

A dam-reservoir system subjected to an earthquake is a nonlinear system, because the fluid equations are always nonlinear regardless of the linear or nonlinear model used for the dam body. Therefore, transient analysis is necessary. In this study, dam-reservoir interaction during earthquake excitation was modeled by utilizing coupled finite element equations based on the Eulerian approach. Direct computing of the one-way coupling technique was used to solve the coupled equations. This technique is based on a simple assumption that the fluid hydrodynamic pressure is applied to the dam body while the deformation of the dam has no influence on the water field. Seismic response analysis of the Sonla concrete gravity dam constructed in Sonla Province, Vietnam was carried out as a verification example. The results of the methodology introduced are in close agreement with results of the iterative method and the solution procedure is found to be less time-consuming than that of the iterative method. This method is very convenient and can be easily implemented in finite element programs with fluid-structure interaction modules.

Friction coupling vibration characteristics analysis of aviation hydraulic pipelines considering multi factors

As the power transmission system of an aircraft,a hydraulic pipeline system is equivalent to the " blood vessel" of the aircraft. With the development of aircraft hydraulic system to high pressure,high speed and high power ratio,the fluid-structure interaction vibration mechanism of hydraulic pipeline is more complex and the influence of friction coupling on vibration cannot be ignored. The fluid-structure interaction of hydraulic pipeline will lead to system vibration,lower reliability of system operation and even pipeline rupture. Taking a hydraulic pipeline of C919 aircraft wingtip as the research object,a 14-equation model of fluid-structure interaction vibration considering friction coupling effect is established in this paper. The effects of friction and fluid parameters on the pipeline fluid-structure interaction vibration characteristics are studied and verified by experiments. The research results will provide theoretical guidance for the analysis of the pipeline fluid-structure interaction vibration and have important theoretical significance and great engineering value for promoting the localization process of large aircraft.

A High-order Coupled Compact Integrated RBF Approximation Based Domain Decomposition Algorithm for Second-order Differential Problems

This paper presents a high-order coupled compact integrated RBF(CC IRBF)approximation based domain decomposition(DD)algorithm for the discretisation of second-order differential problems.Several Schwarz DD algorithms,including one-level additive/multiplicative and two-level additive/multiplicative/hybrid,are employed.The CCIRBF based DD algorithms are analysed with different mesh sizes,numbers of subdomains and overlap sizes for Poisson problems.Our convergence analysis shows that the CCIRBF two-level multiplicative version is the most effective algorithm among various schemes employed here.Especially,the present CCIRBF two-level method converges quite rapidly even when the domain is divided into many subdomains,which shows great promise for either serial or parallel computing.For practical tests,we then incorporate the CCIRBF into serial and parallel two-level multiplicative Schwarz.Several numerical examples,including those governed by Poisson and Navier-Stokes equations are analysed to demonstrate the accuracy and efficiency of the serial and parallel algorithms implemented with the CCIRBF.Numerical results show:(i)the CCIRBF-Serial and-Parallel algorithms have the capability to reach almost the same solution accuracy level of the CCIRBF-Single domain,which is ideal in terms of computational calculations;(ii)the CCIRBF-Serial and-Parallel algorithms are highly accurate in comparison with standard finite difference,compact finite difference and some other schemes;(iii)the proposed CCIRBF-Serial and-Parallel algorithms may be used as alternatives to solve large-size problems which the CCIRBF-Single domain may not be able to deal with.The ability of producing stable and highly accurate results of the proposed serial and parallel schemes is believed to be the contribution of the coarse mesh of the two-level domain decomposition and the CCIRBF approximation.It is noted that the focus of this paper is on the derivation of highly accurate serial and parallel algorithms for second-order differential problems.The scope of this work does not cover a thorough analysis of computational time.

NUMERICAL STUDIES ON RESONANT AND ENHANCEMENT EFFECTS FOR COUPLING OF MICROWAVE PULSES INTO NARROW SLOTS

In this paper, modifications to the finite-difference time-domain(FD-TD) method for modeling microwave pulse coupling into a slot, which is much narrower than one conventional FD-TD cell, are discussed. The coupling process of microwave pulse into a slot is studied by using the modified FD-TD method, and the dependence of microwave coupling on slot sizes, the carrier frequencies and the polarization directions of the incident waves is analysed. Resonant and enhancement effects which occur in this process are observed. The condition at which the resonant effect takes place is also presented.

Time-Domain Simulation for Coupled Motions of Three Barges Moored Side-by-Side in Floatover Operation

Simulating the coupled motions of multiple bodies in the time domain is a complex problem because of the strong hydrodynamic interactions and coupled effect of various mechanical connectors. In this study, we investigate the hydrodynamic responses of three barges moored side-by-side in a floatover operation in the frequency and time domains. In the frequency domain, the damping lid method is adopted to improve the overestimated hydrodynamic coefficients calculated from conventional potential flow theory. A time-domain computing program based on potential flow theory and impulse theory is compiled for analyses that consider multibody hydrodynamic interactions and mechanical effects from lines and fenders. Correspondingly, an experiment is carried out for comparison with the numerical results. All statistics, time series, and power density spectra from decay and irregular wave tests are in a fairly good agreement.

Interlayer Coupling of Co/NM/FM(NiFe and Co) Nano-Sandwich Films

Cu/Co, Cu/NiFe, Ta/NiFe bilayers and Co/Cu/Co, Co/Cu/NiFe, Co/Ta/NiFe sandwich films were deposited by a magnetron sputtering method. Magnetic properties were evaluated by VSM and spin valve magnetoresistance was investigated by a four-probe method to study the interlayer coupling of the two magnetic layers. It has been found that the interlayer coupling depended not only on the layer thickness of the nonmagnetic spacer but also on the nature of the spacer. The interlayer coupling was reduced as the spacer layer thickness increased. The result was consistent with those from observations of the magnetic domain for the trilayers by means of Lorentz Electron Microscope. The trilayers with Cu spacer layer have shown a stronger coupling than those with Ta spacer layer.

Fully Coupled Fluid-Structure Interaction Model Based on Distributed Lagrange Multiplier/Fictitious Domain Method

This paper, with a finite element method, studies the interaction of a coupled incompressible fluid-rigid structure system with a free surface subjected to external wave excitations. With this fully coupled model, the rigid structure is taken as ＂fictitious＂ fluid with zero strain rate. Both fluid and structure are described by velocity and pressure. The whole domain, including fluid region and structure region, is modeled by the incompressible Navier-Stokes equations which are discretized with fixed Eulerian mesh. However, to keep the structure＇ s rigid body shape and behavior, a rigid body constraint is enforced on the ＂fictitious＂ fluid domain by use of the Distributed Lagrange Multipher/Fictitious Domain （DLM/ FD） method which is originally introduced to solve particulate flow problems by Glowinski et al. For the verification of the model presented herein, a 2D numerical wave tank is established to simulate small amplitude wave propagations, and then numerical results are compared with analytical solutions. Finally, a 2D example of fluid-structure interaction under wave dynamic forces provides convincing evidences for the method excellent solution quality and fidelity.

4-Port Octagonal Shaped MIMO Antenna with Low Mutual Coupling for UWB Applications

A4-port multiple-input multiple-output(MIMO)antenna exhibiting lowmutual coupling andUWBperformance is developed.The octagonal-shaped four-antenna elements are connected with a 50microstrip feed line that is arranged rotationally to achieve the orthogonal polarization for improving the MIMO system performance.The antenna has a wideband impedance bandwidth of 7.5GHz with S11<−10 dB from(103.44%)3.5–11GHz and inter-element isolation higher than 20 dB.Antenna validation is carried out by verifying the simulated and measured results after fabricating the antenna.The results in the form of omnidirectional radiation patterns,peak gain(≥4 dBi),and Envelope Correlation Coefficient(ECC)(≤0.01)are extracted to validate the suggested antenna performance.Aswell,time-domain analysis was investigated to demonstrate the operation of the suggested antenna in wideband applications.Finally,the simulated and experimental outcomes have almost similar tendenciesmaking the antenna suitable for its use in UWBMIMOapplications.

High-resolution seismic inversion method based on joint data-driven in the time-frequency domain

Seismic inversion can be divided into time-domain inversion and frequency-domain inversion based on different transform domains.Time-domain inversion has stronger stability and noise resistance compared to frequencydomain inversion.Frequency domain inversion has stronger ability to identify small-scale bodies and higher inversion resolution.Therefore,the research on the joint inversion method in the time-frequency domain is of great significance for improving the inversion resolution,stability,and noise resistance.The introduction of prior information constraints can effectively reduce ambiguity in the inversion process.However,the existing modeldriven time-frequency joint inversion assumes a specific prior distribution of the reservoir.These methods do not consider the original features of the data and are difficult to describe the relationship between time-domain features and frequency-domain features.Therefore,this paper proposes a high-resolution seismic inversion method based on joint data-driven in the time-frequency domain.The method is based on the impedance and reflectivity samples from logging,using joint dictionary learning to obtain adaptive feature information of the reservoir,and using sparse coefficients to capture the intrinsic relationship between impedance and reflectivity.The optimization result of the inversion is achieved through the regularization term of the joint dictionary sparse representation.We have finally achieved an inversion method that combines constraints on time-domain features and frequency features.By testing the model data and field data,the method has higher resolution in the inversion results and good noise resistance.

Optimal Boundary Control Method for Domain Decomposition Algorithm

To study the domain decomposition algorithms for the equations of elliptic type, the method of optimal boundary control was used to advance a new procedure for domain decomposition algorithms and regularization method to deal with the ill posedness of the control problem. The determination of the value of the solution of the partial differential equation on the interface——the key of the domain decomposition algorithms——was transformed into a boundary control problem and the ill posedness of the control problem was overcome by regularization. The convergence of the regularizing control solution was proven and the equations which characterize the optimal control were given therefore the value of the unknown solution on the interface of the domain would be obtained by solving a series of coupling equations. Using the boundary control method the domain decomposion algorithm can be carried out.

Nonlinear Random Motion Analysis of Coupled Heave-Pitch Motions of a Spar Platform Considering lst-Order and 2nd-Order Wave Loads

In this study, the coupled heave-pitch motion equations of a spar platform were established by considering lst-order and 2nd-order random wave loads and the effects of time-varying displacement volume and transient wave elevation. We generated random wave loads based on frequency-domain wave load transfer functions and the Joint North Sea Wave Project （JONSWAP） wave spectrum, designed program codes to solve the motion equations, and then simulated the coupled heave-pitch motion responses of the platform in the time domain. We then calculated and compared the motion responses in different sea conditions and separately investigated the effects of 2nd-order random wave loads and transient wave elevation. The results show that the coupled heave-pitch motion responses of the platform are primarily dominated by wave height and the characteristic wave period, the latter of which has a greater impact. 2nd-order mean wave loads mainly affect the average heave value. The platform＇s pitch increases after the 2nd-order low frequency wave loads are taken into account. The platform＇s heave is underestimated if the transient wave elevation term in the motion equations is neglected.

A SIMPLIFIED MODEL FOR DOMAIN SWITCHING OF FERROELECTRIC CRYSTAL

Domain switching is the main source of nonlinear characteristics in ferroelectrics. According to crystal plasticity theory, the domains and domain switching systems for perovskite- type structure ferroelectrics are de?ned. Considering the traverse motion performance of domain wall, a rather simpli?ed form of evolution law about incremental of volume fraction during domain switching has been developed. The main factors, which exert an in?uence on domain switching, such as material parameters, domain wall motion history, kind of domain switching (180? or 90?) and volume fraction, could be addressed. The hysteresis loops of spontaneous electric polarization as a function of electric ?eld, the butter?y shaped strain versus electric ?eld curve and the platform relations between spontaneous polarization and stress, as well as the longitudinal strain and stress, are well simulated and discussed.

A New Dual Polarized Aperture-Coupled Printed Array for SAR Applications

This paper presents a new design of dual polarized aperture coupled printed antenna array. The finite difference time domain (FDTD) analysis of an aperture coupled microstrip element is performed, and the effects of antenna parameters on its characteristics are obtained to guide the design of the printed array. Then an 8×2 dual polarized array design in X band is introduced with configuration plots. In order to improve its isolation and cross polarization, an outphase displacement feeding technique is adopted in the feed network. Also, the round bends are used instead of conventional right angle bends so as to achieve better VSWR performance. Experimental results are presented, indicating the validity of the design. This dual polarized array can be applied as a sub array of spaceborne SAR systems.