Research on aiming methods for small sample size shooting tests of two-dimensional trajectory correction fuse

The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.

Parameter estimation of maneuvering targets in OTHR based on sparse time-frequency representation

This paper proposes a new method for estimating the parameter of maneuvering targets based on sparse time-frequency transform in over-the-horizon radar（OTHR）. In this method, the sparse time-frequency distribution of the radar echo is obtained by solving a sparse optimization problem based on the short-time Fourier transform. Then Hough transform is employed to estimate the parameter of the targets. The proposed algorithm has the following advantages： Compared with the Wigner-Hough transform method, the computational complexity of the sparse optimization is low due to the application of fast Fourier transform（FFT）. And the computational cost of Hough transform is also greatly reduced because of the sparsity of the time-frequency distribution. Compared with the high order ambiguity function（HAF） method, the proposed method improves in terms of precision and robustness to noise. Simulation results show that compared with the HAF method, the required SNR and relative mean square error are 8 dB lower and 50 dB lower respectively in the proposed method. While processing the field experiment data, the execution time of Hough transform in the proposed method is only 4% of the Wigner-Hough transform method.

Cyclic-Auto-Correlation Based Timing Estimation Algorithm for Time-Frequency Overlapping Multi-Carrier Signals

In recent years,the time-frequency overlapping multi-carrier signal has been a novel and valuable topic in blind signal processing,especially in the non-cooperative receiving field.But there is little related research in public published papers.This paper proposes two timing estimation algorithms,which are non-data-aided and based on the cyclic auto-correlation function.In order to evaluate the performance of the proposed algorithms,the theoretical bound of the timing estimation is derived.According to the analyses and simulation results,the effectiveness of the proposed algorithms has been demonstrated.It shows that MethodⅠhas better performance than MethodⅡ.However,MethodⅡdoes not need prior information,so it has a wider range of applications.

An Analysis of Two-Dimensional Image Data Using a Grouping Estimator

Machine learning methods, one type of methods used in artificial intelligence, are now widely used to analyze two-dimensional (2D) images in various fields. In these analyses, estimating the boundary between two regions is basic but important. If the model contains stochastic factors such as random observation errors, determining the boundary is not easy. When the probability distributions are mis-specified, ordinal methods such as probit and logit maximum likelihood estimators (MLE) have large biases. The grouping estimator is a semiparametric estimator based on the grouping of data that does not require specific probability distributions. For 2D images, the grouping is simple. Monte Carlo experiments show that the grouping estimator clearly improves the probit MLE in many cases. The grouping estimator essentially makes the resolution density lower, and the present findings imply that methods using low-resolution image analyses might not be the proper ones in high-density image analyses. It is necessary to combine and compare the results of high- and low-resolution image analyses. The grouping estimator may provide theoretical justifications for such analysis.

Development and application of a two-dimensional water quality model for the Daqinghe River Mouth of the Dianchi Lake

Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.

Research on LPI radar signal detection and parameter estimation technology

Modern radar signals mostly use low probability of intercept(LPI)waveforms,which have short pulses in the time domain,multicomponent properties,frequency hopping,combined modulation waveforms and other characteristics,making the detection and estimation of LPI radar signals extremely difficult,and leading to highly required significant research on perception technology in the battlefield environment.This paper proposes a visibility graphs(VG)-based multicomponent signals detection method and a modulation waveforms parameter estimation algorithm based on the time-frequency representation(TFR).On the one hand,the frequency domain VG is used to set the dynamic threshold for detecting the multicomponent LPI radar waveforms.On the other hand,the signal is projected into the time and frequency domains by the TFR method for estimating its symbol width and instantaneous frequency(IF).Simulation performance shows that,compared with the most advanced methods,the algorithm proposed in this paper has a valuable advantage.Meanwhile,the calculation cost of the algorithm is quite low,and it is achievable in the future battlefield.

Direction-of-arrival estimation based on direct data domain (D3) method

A direction-of-arrival （DOA） estimation algorithm based on direct data domain （D3） approach is presented. This method can accuracy estimate DOA using one snapshot modified data, called the temporal and spatial two-dimensional vector reconstruction （TSR） method. The key idea is to apply the D3 approach which can extract the signal of given frequency but null out other frequency signals in temporal domain. Then the spatial vector reconstruction processing is used to estimate the angle of the spatial coherent signal source based on extract signal data. Compared with the common temporal and spatial processing approach, the TSR method has a lower computational load, higher real-time performance, robustness and angular accuracy of DOA. The proposed algorithm can be directly applied to the phased array radar of coherent pulses. Simulation results demonstrate the performance of the proposed technique.

High-Order Local Discontinuous Galerkin Algorithm with Time Second-Order Schemes for the Two-Dimensional Nonlinear Fractional Diffusion Equation

In this article,some high-order local discontinuous Galerkin(LDG)schemes based on some second-order θ approximation formulas in time are presented to solve a two-dimen-sional nonlinear fractional diffusion equation.The unconditional stability of the LDG scheme is proved,and an a priori error estimate with O(h^(k+1)+At^(2))is derived,where k≥0 denotes the index of the basis function.Extensive numerical results with Q^(k)(k=0,1,2,3)elements are provided to confirm our theoretical results,which also show that the second-order convergence rate in time is not impacted by the changed parameter θ.

Chirplet Signal and Empirical Mode Decompositions of Ultrasonic Signals for Echo Detection and Estimation

In this study, the performance of chirplet signal decomposition (CSD) and empirical mode decomposition (EMD) coupled with Hilbert spectrum have been evaluated and compared for ultrasonic imaging applications. Numerical and experimental results indicate that both the EMD and CSD are able to decompose sparsely distributed chirplets from noise. In case of signals consisting of multiple interfering chirplets, the CSD algorithm, based on successive search for estimating optimal chirplet parameters, outperforms the EMD algorithm which estimates a series of intrinsic mode functions (IMFs). In particular, we have utilized the EMD as a signal conditioning method for Hilbert time-frequency representation in order to estimate the arrival time and center frequency of chirplets in order to quantify the ultrasonic signals. Experimental results clearly exhibit that the combined EMD and CSD is an effective processing tools to analyze ultrasonic signals for target detection and pattern recognition.

DETERMINATION OF PARAMETERS IN A TWO-DIMENSIONAL MODEL FOR FIXED-BED ADSORBERS

A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.

Global existence of solutions to the periodic initial value problems for two-dimensional Newton-Boussinesq equations

A class of periodic initial value problems for two-dimensional Newton- Boussinesq equations are investigated in this paper. The Newton-Boussinesq equations are turned into the equivalent integral equations. With iteration methods, the local existence of the solutions is obtained. Using the method of a priori estimates, the global existence of the solution is proved.

Improved Eigenstructure-Based 2D DOA Estimation Approaches Based on Nystrom Approximation

In this paper,we propose improved approaches for two-dimensional(2 D) direction-of-arrival(DOA) estimation for a uniform rectangular array(URA).Unlike the conventional eigenstructure-based estimation approaches such as Multiple Signals Classification(MUSIC) and Estimation of Signal Parameters via Rotational Invariance Technique(ESPRIT),the proposed approaches estimate signal and noise subspaces with Nystr?m approximation,which only need to calculate two sub-matrices of the whole sample covariance matrix and avoid the need to directly calculate the eigenvalue decomposition(EVD) of the sample covariance matrix.Hence,the proposed approaches can improve the computational efficiency greatly for large-scale URAs.Numerical results verify the reliability and efficiency of the proposed approaches.

Numerical Analysis of Upwind Difference Schemes for Two-Dimensional First-Order Hyperbolic Equations with Variable Coefficients

In this paper, we consider the initial-boundary value problem of two-dimensional first-order linear hyperbolic equation with variable coefficients. By using the upwind difference method to discretize the spatial derivative term and the forward and backward Euler method to discretize the time derivative term, the explicit and implicit upwind difference schemes are obtained respectively. It is proved that the explicit upwind scheme is conditionally stable and the implicit upwind scheme is unconditionally stable. Then the convergence of the schemes is derived. Numerical examples verify the results of theoretical analysis.

Adaptive Time-Frequency Distribution Based on Time-Varying Autoregressive and Its Application to Machine Fault Diagnosis

The time-varying autoregressive （TVAR） modeling of a non-stationary signal is studied. In the proposed method, time-varying parametric identification of a non-stationary signal can be translated into a linear time-invariant problem by introducing a set of basic functions. Then, the parameters are estimated by using a recursive least square algorithm with a forgetting factor and an adaptive time-frequency distribution is achieved. The simulation results show that the proposed approach is superior to the short-time Fourier transform and Wigner distribution. And finally, the proposed method is applied to the fault diagnosis of a bearing , and the experiment result shows that the proposed method is effective in feature extraction.

Target parameter estimation for OTFS-integrated radar and communications based on sparse reconstruction preprocessing

Orthogonal time-frequency space(OTFS)is a new modulation technique proposed in recent years for high Doppler wireless scenes.To solve the parameter estimation problem of the OTFS-integrated radar and communications system,we propose a parameter estimation method based on sparse reconstruction preprocessing to reduce the computational effort of the traditional weighted subspace fitting(WSF)algorithm.First,an OTFS-integrated echo signal model is constructed.Then,the echo signal is transformed to the time domain to separate the target angle from the range,and the range and angle of the detected target are coarsely estimated by using the sparse reconstruction algorithm.Finally,the WSF algorithm is used to refine the search with the coarse estimate at the center to obtain an accurate estimate.The simulations demonstrate the effectiveness and superiority of the proposed parameterestimation algorithm.

Secure orthogonal time-frequency multiplexing with two-dimensional encryption for optical-wireless communications

This paper firstly,to the best of our knowledge,proposed two-dimensional(2D)encryption based on the Arnold transformation for implementing a secure DC-biased optical orthogonal time-frequency multiplexing(DCO-OTFM)in optical-wireless communications(OWCs).The encrypted data is transformed to the particular 2D matrix and decrypted by the only key to get the correct information.Meanwhile,the number of keys in 2D encryption is enormous,which prevents eavesdroppers from exhaustively searching secret keys rapidly to find the right decryption.Numerical results demonstrate that the secure DCO-OTFM based on 2D encryption can effectively prevent signal decryption from the eavesdropper,which has good secure performance for applying in OWC.

Distribution network state estimation based on attention-enhanced recurrent neural network pseudo-measurement modeling

Because there is insufficient measurement data when implementing state estimation in distribution networks,this paper proposes an attention-enhanced recurrent neural network(A-RNN)-based pseudo-measurement modeling metho.First,based on analyzing the power series at the source and load end in the time and frequency domains,a period-dependent extrapolation model is established to characterize the power series in those domains.The complex mapping functions in the model are automatically represented by A-RNNs to obtain an A-RNNs-based period-dependent pseudo-measurement generation model.The distributed dynamic state estimation model of the distribution network is established,and the pseudo-measurement data generated by the model in real time is used as the input of the state estimation model together with the measurement data.The experimental results show that the method proposed can explore in depth the complex sequence characteristics of the measurement data such that the accuracy of the pseudo-measurement data is further improved.The results also show that the state estimation accuracy of a distribution network is very poor when there is a lack of measurement data,but is greatly improved by adding the pseudo-measurement data generated by the model proposed.

Two-dimensional extreme distribution for estimating mechanism reliability under large variance

The effective estimation of the operational reliability of mechanism is a significant challenge in engineering practices,especially when the variance of uncertain factors becomes large.Addressing this challenge,a novel mechanism reliability method via a two-dimensional extreme distribution is investigated in the paper.The time-variant reliability problem for the mechanism is first transformed to the time-invariant system reliability problem by constructing the two-dimensional extreme distribution.The joint probability density functions(JPDFs),including random expansion points and extreme motion errors,are then obtained by combining the kernel density estimation(KDE)method and the copula function.Finally,a multidimensional integration is performed to calculate the system time-invariant reliability.Two cases are investigated to demonstrate the effectiveness of the presented method.

Ruin Probabilities for a Two-Dimensional Perturbed Risk Model with Stochastic Premiums

In this paper, we consider a two-dimensional perturbed risk model with stochastic premiums and certain dependence between the two marginal surplus processes. We obtain the Lundberg-type upper bound for the infinite-time ruin probability by martingale approach, discuss how the dependence affects the obtained upper bound and give some numerical examples to illustrate our results. For the heavy-tailed claims case, we derive an explicit asymptotic estimation for the finite-time ruin probability.

Computationally efficient 2-D DOA estimation for non-uniform two-L-shaped array

A two-dimensional direction-of-arrival(DOA) estimation method for non-uniform two-L-shaped array is presented in which the element spacing is larger than half-wavelength. To extract automatically paired low-variance cyclically ambiguous direction cosines and high-variance unambiguous direction cosines from the sub-blocks, the proposed method constructs and partitions the cross-correlation matrices. Then, the low-variance unambiguous direction cosines are obtained using the ambiguity resolved technique. Simulation results demonstrate that the proposed method has lower computation complexity and higher resolution than the existing methods especially when the elevation angles are between 70 and 90 degrees.