Multi-Time Scale Operation and Simulation Strategy of the Park Based on Model Predictive Control

Due to the impact of source-load prediction power errors and uncertainties,the actual operation of the park will have a wide range of fluctuations compared with the expected state,resulting in its inability to achieve the expected economy.This paper constructs an operating simulation model of the park power grid operation considering demand response and proposes a multi-time scale operating simulation method that combines day-ahead optimization and model predictive control(MPC).In the day-ahead stage,an operating simulation plan that comprehensively considers the user’s side comfort and operating costs is proposed with a long-term time scale of 15 min.In order to cope with power fluctuations of photovoltaic,wind turbine and conventional load,MPC is used to track and roll correct the day-ahead operating simulation plan in the intra-day stage to meet the actual operating operation status of the park.Finally,the validity and economy of the operating simulation strategy are verified through the analysis of arithmetic examples.

Research on Reduction of Solar Power Curtailment with Grid Connected Energy Storage System Based on Time-Series Production Simulation

Due to the variable output of renewable energy (RE) generation, difficulties of dispatching RE for power system operators could not be avoided. One of possible solutions is the energy storage technology, especially the battery storage system. The large-scale energy storage system is available to support power system reliable flexibility for load following and system frequency regulation. In this paper, the bottlenecks of large-scale solar power generation dispatching and operation in Qinghai grid are discussed, and a new PV-energy storage coordinated dispatching method is proposed for reduction of PV curtailment in Qinghai. Moreover, the validation based on the time-series production simulation is provided using real data from Qinghai. The results indicate that the proposed method can effectively decrease the curtailment of solar power and future vision of large-scale solar power coordinated operation with energy storage system is also presented.

Symplectic partitioned Runge-Kutta method based onthe eighth-order nearly analytic discrete operator and its wavefield simulations

We propose a symplectic partitioned Runge-Kutta （SPRK） method with eighth-order spatial accuracy based on the extended Hamiltonian system of the acoustic waveequation. Known as the eighth-order NSPRK method, this technique uses an eighth-orderaccurate nearly analytic discrete （NAD） operator to discretize high-order spatial differentialoperators and employs a second-order SPRK method to discretize temporal derivatives.The stability criteria and numerical dispersion relations of the eighth-order NSPRK methodare given by a semi-analytical method and are tested by numerical experiments. We alsoshow the differences of the numerical dispersions between the eighth-order NSPRK methodand conventional numerical methods such as the fourth-order NSPRK method, the eighth-order Lax-Wendroff correction （LWC） method and the eighth-order staggered-grid （SG）method. The result shows that the ability of the eighth-order NSPRK method to suppress thenumerical dispersion is obviously superior to that of the conventional numerical methods. Inthe same computational environment, to eliminate visible numerical dispersions, the eighth-order NSPRK is approximately 2.5 times faster than the fourth-order NSPRK and 3.4 timesfaster than the fourth-order SPRK, and the memory requirement is only approximately47.17% of the fourth-order NSPRK method and 49.41% of the fourth-order SPRK method,which indicates the highest computational efficiency. Modeling examples for the two-layermodels such as the heterogeneous and Marmousi models show that the wavefields generatedby the eighth-order NSPRK method are very clear with no visible numerical dispersion.These numerical experiments illustrate that the eighth-order NSPRK method can effectivelysuppress numerical dispersion when coarse grids are adopted. Therefore, this methodcan greatly decrease computer memory requirement and accelerate the forward modelingproductivity. In general, the eighth-order NSPRK method has tremendous potential value forseismic exploration and seismology research.

NC MILLING OPERATION SIMULATION

Due to the unproductive and time consuming of the test cut, it is important to recognize all the possible errors before starting the process. This paper introduces a simulation program which can be used in an NC vertical milling machine. A unique method is used for simulating the cutting process and displaying the three dimensional images. This method not only simplifies greatly the treatment of the hidden line but also creates a “photograph effect” image. The program is written in Visual B.

Fourier neural operator approach to large eddy simulation of three-dimensional turbulence

Fourier neural operator(FNO)model is developed for large eddy simulation(LES)of three-dimensional(3D)turbulence.Velocity fields of isotropic turbulence generated by direct numerical simulation(DNS)are used for training the FNO model to predict the filtered velocity field at a given time.The input of the FNO model is the filtered velocity fields at the previous several time-nodes with large time lag.In the a posteriori study of LES,the FNO model performs better than the dynamic Smagorinsky model(DSM)and the dynamic mixed model(DMM)in the prediction of the velocity spectrum,probability density functions(PDFs)of vorticity and velocity increments,and the instantaneous flow structures.Moreover,the proposed model can significantly reduce the computational cost,and can be well generalized to LES of turbulence at higher Taylor-Reynolds numbers.

Interactive plant simulation modeling for developing an operator training system in a natural gas pressure-regulating station

This study proposes a method of interactive plant simulation modeling which delivers the online simulated results to the field operators and induces them to take proper actions in the case of pre-identified accident scenarios in a chemical plant. The developed model integrates the real-time process dynamic simulation with 3DCFD accident simulation in a designed interface using object linking and embedding technology so that it can convey to trainees the online information of the accident which is not available in existing operator training systems.The model encompasses the whole process of data transfer till the end of the training at which a trainee operates an emergency shutdown system in a programmed model. In this work, an overall scenario is simulated which is from an abnormal increase in the main valve discharge（second）pressure due to valve malfunction to accidental gas release through the crack of a pressure recorder, and the magnitude of the accident with respect to the lead time of each trainee＇s emergency response is analyzed. The model can improve the effectiveness of the operator training system through interactively linking the trainee actions with the simulation model resulting in different accident scenarios with respect to each trainee＇s competence when facing an accident.

Estimating the Operation Status of Steam Cracking Furnace Using Numerical Simulation with Combustion Models

An accurate and complete geometric model was constructed to simulate the combustion, flow and temperature environment in the radiant section of the steam cracking furnace. Simulation of flow and radiation status has utilized the standard k-ε model and P1 model. The finite-rate/eddy-dissipation (finite-rate/ED) combustion model and non-premixed combustion model were both used to simulate accurately the combustion and the operation status of the steam cracking furnace. Three different surfaces of the steam cracking furnace were obtained from the simulation, namely:the flue gas temperature field of the entrance surface in long flame burners, the central surface location of tubes, and the crossover section surface. Detailed information on the flue gas temperature and the mass concentration fraction of these different surfaces in the steam cracking furnace can also be obtained by the simulation. This paper analyzed and compared the simulation results with the two combustion models, estimated the operation status of the steam cracking furnace, and reported that the finite-rate/ED model is appropriate to simulate the steam cracking furnace by comparing key simulation data with actual test data. This work has also provided a theoretical basis for simulating and operating the steam cracking furnace.

Study on Simulation of Remotely Operated Underwater Vehicle Spatial Motion

In order to analyze the spatial maneuverability of the remotely operated underwater vehicle(ROV),the 6-DOF motion mathematic model of the ROV was founded.Hydrodynamics were analyzed by using the Taylor series.The thrusters on the ROV were discussed.This paper considers three cases of motion simulation:vertical motion,rotational motion and Z-shape motion.A series of simulation experiments showed that the 6-DOF motion mathematic model was correct and reliable,and also fit with the scene simulation.

Study on Operation of Arctic Offshore Complex by Means of Multicomponent Process-Based Simulation

We developed a detailed simulation model of the Arctic marine transport system(MTS) for oil platform Prirazlomnaya. The model has a multidisciplinary nature and involves: sub-models of various transport and technological processes; stochastic weather generator to obtain time series of 15 environmental parameters; and contextual planning algorithm to build voyage plan considering several types of ships and cargoes. We used a significant amount of real operational data to identify model parameters and to prove its statistical reliability. Our main scientific task is to investigate the interaction of various processes of a different nature, while the practical aim is to find a set of measures to increase the efficiency of MTS. The results of the study reveal many examples of the mutual interaction of various processes that need to be considered at the design stage to avoid technical mistakes.The study formed a basis for making managerial decisions at the top level of Gazprom Neft Shelf Company.

The Research and Development of Integrated Operation-Maintenance Simulation Training System

With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the level of maintainers, which aim at the integrated operation of substation operation and maintenance service. This article gives an introduction of a simulation training system which is designed for operation-skills training in electrical systems. By the composition of the multiple subjects and skills training for operations staff, this system can provide human guarantee and intellectual support for the "Big-Centralized Overhal".

Desulfurization characteristics of slaked lime and regulation optimization of circulating fluidized bed flue gas desulfurization process--A combined experimental and numerical simulation study

Circulating fluidized bed flue gas desulfurization(CFB-FGD) process has been widely applied in recent years. However, high cost caused by the use of high-quality slaked lime and difficult operation due to the complex flow field are two issues which have received great attention. Accordingly, a laboratory-scale fluidized bed reactor was constructed to investigate the effects of physical properties and external conditions on desulfurization performance of slaked lime, and the conclusions were tried out in an industrial-scale CFB-FGD tower. After that, a numerical model of the tower was established based on computational particle fluid dynamics(CPFD) and two-film theory. After comparison and validation with actual operation data, the effects of operating parameters on gas-solid distribution and desulfurization characteristics were investigated. The results of experiments and industrial trials showed that the use of slaked lime with a calcium hydroxide content of approximately 80% and particle size greater than 40 μm could significantly reduce the cost of desulfurizer. Simulation results showed that the flow field in the desulfurization tower was skewed under the influence of circulating ash. We obtained optimal operating conditions of 7.5 kg·s^(-1)for the atomized water flow, 70 kg·s^(-1)for circulating ash flow, and 0.56 kg·s^(-1)for slaked lime flow, with desulfurization efficiency reaching 98.19% and the exit flue gas meeting the ultraclean emission and safety requirements. All parameters selected in the simulation were based on engineering examples and had certain application reference significance.

Monte Carlo simulation of sequential structure control of AN-MA-IA aqueous copolymerization by different operation modes

The regulation of polyacrylonitrile(PAN)copolymer composition and sequence structure is the precondition for producing high-quality carbon fiber high quality.In this work,the sequential structure control of acrylonitrile(AN),methyl acrylate(MA)and itaconic acid(IA)aqueous copolymerization was investigated by Monte Carlo(MC)simulation.The parameters used in Monte Carlo were optimized via machine learning(ML)and genetic algorithms(GA)using the experimental data from batch copolymerization.The results reveal that it is difficult to control the aqueous copolymerization to obtain PAN copolymer with uniform sequence structure by batch polymerization with one-time feeding.By contrary,it is found that the PAN copolymer with uniform composition and sequence structure can be obtained by adjusting IA feeding quantity in each reactor of a train of five CSTRs.Hopefully,the results obtained in this work can provide valuable information for the understanding and optimization of AN copolymerization process to obtain high-quality PAN copolymer precursor.

Three-Dimensional Simulations of RESET Operation in Phase-Change Random Access Memory with Blade-Type Like Phase Change Layer by Finite Element Modeling

An optimized device structure for reducing the RESET current of phase-change random access memory （PCRAM） with blade-type like （BTL） phase change layer is proposed. The electrical thermal analysis of the BTL cell and the blade heater contactor structure by three-dimensional finite element modeling are compared with each other during RESET operation. The simulation results show that the programming region of the phase change layer in the BTL cell is much smaller, and thermal electrical distributions of the BTL cell are more concentrated on the TiN/GST interface. The results indicate that the BTL cell has the superiorities of increasing the heating efficiency, decreasing the power consumption and reducing the RESET current from 0.67mA to 0.32mA. Therefore, the BTL cell will be appropriate for high performance PCRAM device with lower power consumption and lower RESET current.

Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Simulation Operating System and Integrated Simulation Software

In this paper, a new concept of simulation operating system (SIMOS) is described. A detailed definition of SIMOS is given, and two integrated simulation software (IPSOS and IMSS) are introduced based on SIMOS.

Study on the Effect of Multi-Type Current Transformers Hybrid Operation on Differential Protection of the Bus Based on Dynamic Simulation

This paper analyzes characteristics of multi type current transformers hybrid operation for each branch of the bus and their effects on differential protection of the bus. By theoretically analyzing transmission characteristics of multi type current transformers and their influence factors, we study the dynamic model testing method of multi type current transformers for the bus, and design 3 kinds of testing schemes by making the equivalent model based on the field of P-level current transformer, TPY-level current transformer and electronic current transformer, and build the hybrid operation testing platform of multi type current transformers. Finally, we compare and analyze the transmission characteristics difference of multi type current transformers on the same branch and the characteristics difference of hybrid operation in two successive external faults, analyze the cause behind the differences, and put forward the corresponding improvement measures.

The effect of weeding frequency and schedule on weeding operation time: a simulation study on a sugi (Cryptomeria japonica) plantation in Japan

This study quantified the effect of weeding frequency and weeding schedules on weeding operation time in a sugi(Cryptomeria japonica)plantation stand.A weeding operation time estimation model was developed;then the cumulative weeding operation time after six growing seasons was simulated using the developed model.The developed model included weed height,relative height of weeds to sugi,and initial planting density.The simulated cumulative weeding operation time decreased approximately 6%for each one-treatment decrease in weeding frequency.Under a three-treatment weeding frequency scenario,the simulated cumulative operation time when weeding was conducted during non-consecutive years was longer than that when weeding was conducted during three consecutive years.The results suggest that carrying out weeding treatment during consecutive years is the more effective for reduction of weeding costs.We conclude that weeding schedule as well as weeding frequency must be considered for reduction of weeding operation time.

Numerical Analysis on Temperature Distribution in a Single Cell of PEFC Operated at Higher Temperature by1D Heat Transfer Model and 3D Multi-Physics Simulation Model

This study is to understand the impact of operating conditions, especially initial operation temperature (Tini) which is set in a high temperature range, on the temperature profile of the interface between the polymer electrolyte membrane (PEM) and the catalyst layer at the cathode (i.e., the reaction surface) in a single cell of polymer electrolyte fuel cell (PEFC). A 1D multi-plate heat transfer model based on the temperature data of the separator measured using the thermograph in a power generation experiment was developed to evaluate the reaction surface temperature (Treact). In addition, to validate the proposed heat transfer model, Treact obtained from the model was compared with that from the 3D numerical simulation using CFD software COMSOL Multiphysics which solves the continuity equation, Brinkman equation, Maxwell-Stefan equation, Butler-Volmer equation as well as heat transfer equation. As a result, the temperature gap between the results obtained by 1D heat transfer model and those obtained by 3D numerical simulation is below approximately 0.5 K. The simulation results show the change in the molar concentration of O2 and H2O from the inlet to the outlet is more even with the increase in Tini due to the lower performance of O2 reduction reaction. The change in the current density from the inlet to the outlet is more even with the increase in Tini and the value of current density is smaller with the increase in Tini due to the increase in ohmic over-potential and concentration over-potential. It is revealed that the change in Treact from the inlet to the outlet is more even with the increase in Tini irrespective of heat transfer model. This is because the generated heat from the power generation is lower with the increase in Tini due to the lower performance of O2 reduction reaction.

Simulation platform of economical operation and dispatch for power plant based on float-coded genetic algorithm

This paper discusses a float-coded genetic algorithm and its application to the optimization of the power plant operation concerning the simulation problem of economical operation for power plant systems. The method proposed realizes the load optimization between generating units of power plants and their loads, solves the problem of influence of a unit plant pause spoilage and load variance on the optimal plant combination and load, and finally establishes a simulation platform for the power plant economical operation.

Remote Operation SW for USV: Part II. Simulation Development

For contingencies occurring in a complex marine environment, Unmanned Surface Vehicle (USV) has to recognize the situation and decide behaviors,?and?plan the following actions through the Integrated Mission Planning Process. Therefore, researches are actively being carried out about it. However, since it is difficult to test the actual USV with the mission planning process, it is necessary to develop a virtual experimental environment based on Modeling?&?Simulation (M&S). In this study, we developed an integrated simulation environment capable of simulating and analyzing the overall mission of USV. In Part?I, we modelled the USV Integrated Mission Planning Process and in Part?II, we developed an experimental framework and interface for loading them. In addition, we verified the suitability of this model through scenarios and defined the Mission of Effectiveness (MOE) concept for USV mission analysis.